Vxlan-gpe cli reference

create vxlan-gpe tunnel

create vxlan-gpe tunnel local <local-addr>  {remote <remote-addr>|group <mcast-addr> <intf-name>} vni <nn> [next-ip4][next-ip6][next-ethernet][next-nsh] [encap-vrf-id <nn>] [decap-vrf-id <nn>] [del]

Add or delete a VXLAN-GPE Tunnel.

VXLAN-GPE provides the features needed to allow L2 bridge domains (BDs) to span multiple servers. This is done by building an L2 overlay on top of an L3 network underlay using VXLAN-GPE tunnels.

This makes it possible for servers to be co-located in the same data center or be separated geographically as long as they are reachable through the underlay L3 network.

You can refer to this kind of L2 overlay bridge domain as a VXLAN-GPE segment.

Example of how to create a VXLAN-GPE Tunnel:

create vxlan-gpe tunnel local 10.0.3.1 remote 10.0.3.3 vni 13 encap-vrf-id 7

Example of how to delete a VXLAN-GPE Tunnel:

create vxlan-gpe tunnel local 10.0.3.1 remote 10.0.3.3 vni 13 del

Declaration: create_vxlan_gpe_tunnel_command src/vnet/vxlan-gpe/vxlan_gpe.c line 972

Implementation: vxlan_gpe_add_del_tunnel_command_fn

set interface ip vxlan-gpe-bypass

set interface ip vxlan-gpe-bypass <interface> [del]

This command adds the 'ip4-vxlan-gpe-bypass' graph node for a given interface. By adding the IPv4 vxlan-gpe-bypass graph node to an interface, the node checks for and validate input vxlan_gpe packet and bypass ip4-lookup, ip4-local, ip4-udp-lookup nodes to speedup vxlan_gpe packet forwarding. This node will cause extra overhead to for non-vxlan_gpe packets which is kept at a minimum.

Example of graph node before ip4-vxlan-gpe-bypass is enabled:

show vlib graph ip4-vxlan-gpe-bypass

           Name                      Next                    Previous
ip4-vxlan-gpe-bypass                error-drop [0]
                               vxlan4-gpe-input [1]
                                ip4-lookup [2]

Example of how to enable ip4-vxlan-gpe-bypass on an interface:

set interface ip vxlan-gpe-bypass GigabitEthernet2/0/0

Example of graph node after ip4-vxlan-gpe-bypass is enabled:

show vlib graph ip4-vxlan-gpe-bypass

           Name             Next                      Previous
ip4-vxlan-gpe-bypass       error-drop [0]            ip4-input
                      vxlan4-gpe-input [1]      ip4-input-no-checksum
                       ip4-lookup [2]

Example of how to display the feature enabled on an interface:

show ip interface features GigabitEthernet2/0/0

IP feature paths configured on GigabitEthernet2/0/0...
...
ipv4 unicast:
  ip4-vxlan-gpe-bypass
  ip4-lookup
...

Example of how to disable ip4-vxlan-gpe-bypass on an interface:

set interface ip vxlan-gpe-bypass GigabitEthernet2/0/0 del

Declaration: set_interface_ip_vxlan_gpe_bypass_command src/vnet/vxlan-gpe/vxlan_gpe.c line 1131

Implementation: set_ip4_vxlan_gpe_bypass

set interface ip6 vxlan-gpe-bypass

set interface ip6 vxlan-gpe-bypass <interface> [del]

This command adds the 'ip6-vxlan-gpe-bypass' graph node for a given interface. By adding the IPv6 vxlan-gpe-bypass graph node to an interface, the node checks for and validate input vxlan_gpe packet and bypass ip6-lookup, ip6-local, ip6-udp-lookup nodes to speedup vxlan_gpe packet forwarding. This node will cause extra overhead to for non-vxlan_gpe packets which is kept at a minimum.

Example of graph node before ip6-vxlan-gpe-bypass is enabled:

show vlib graph ip6-vxlan-gpe-bypass

           Name                      Next                    Previous
ip6-vxlan-gpe-bypass                error-drop [0]
                               vxlan6-gpe-input [1]
                                ip6-lookup [2]

Example of how to enable ip6-vxlan-gpe-bypass on an interface:

set interface ip6 vxlan-gpe-bypass GigabitEthernet2/0/0

Example of graph node after ip6-vxlan-gpe-bypass is enabled:

show vlib graph ip6-vxlan-gpe-bypass

           Name               Next                    Previous
ip6-vxlan-gpe-bypass         error-drop [0]          ip6-input
                        vxlan6-gpe-input [1]    ip4-input-no-checksum
                         ip6-lookup [2]

Example of how to display the feature enabled on an interface:

show ip interface features GigabitEthernet2/0/0

IP feature paths configured on GigabitEthernet2/0/0...
...
ipv6 unicast:
  ip6-vxlan-gpe-bypass
  ip6-lookup
...

Example of how to disable ip6-vxlan-gpe-bypass on an interface:

set interface ip6 vxlan-gpe-bypass GigabitEthernet2/0/0 del

Declaration: set_interface_ip6_vxlan_gpe_bypass_command src/vnet/vxlan-gpe/vxlan_gpe.c line 1187

Implementation: set_ip6_vxlan_gpe_bypass

Display all the VXLAN-GPE Tunnel entries.

Example of how to display the VXLAN-GPE Tunnel entries:

show vxlan-gpe tunnel

[0] local 10.0.3.1 remote 10.0.3.3 vni 13 encap_fib_index 0 sw_if_index 5 decap_next l2

Declaration: show_vxlan_gpe_tunnel_command src/vnet/vxlan-gpe/vxlan_gpe.c line 1020

Implementation: show_vxlan_gpe_tunnel_command_fn