Adj cli reference

adjacency counters

adjacency counters [enable|disable]

Enable/disable per-adjacency counters. This is optional because it comes with a non-negligible performance cost.

Declaration: adj_cli_counters_set_command src/vnet/adj/adj.c line 782

Implementation: adj_cli_counters_set

show adj

show adj [<adj_index>] [interface] [summary]

Show all adjacencies.

sh adj

[@0]
[@1]  glean: loop0
[@2] ipv4 via 1.0.0.2 loop0: IP4: 00:00:22:aa:bb:cc -> 00:00:11:aa:bb:cc
[@3] mpls via 1.0.0.2 loop0: MPLS: 00:00:22:aa:bb:cc -> 00:00:11:aa:bb:cc
[@4] ipv4 via 1.0.0.3 loop0: IP4: 00:00:22:aa:bb:cc -> 00:00:11:aa:bb:cc
[@5] mpls via 1.0.0.3 loop0: MPLS: 00:00:22:aa:bb:cc -> 00:00:11:aa:bb:cc

Declaration: adj_show_command src/vnet/adj/adj.c line 738

Implementation: adj_show

show adj nbr

show adj nbr [<adj_index>] [interface]

Show all neighbour adjacencies.

sh adj nbr

[@2] ipv4 via 1.0.0.2 loop0: IP4: 00:00:22:aa:bb:cc -> 00:00:11:aa:bb:cc
[@3] mpls via 1.0.0.2 loop0: MPLS_UNICAST: 00:00:22:aa:bb:cc -> 00:00:11:aa:bb:cc
[@4] ipv4 via 1.0.0.3 loop0: IP4: 00:00:22:aa:bb:cc -> 00:00:11:aa:bb:cc
[@5] mpls via 1.0.0.3 loop0: MPLS_UNICAST: 00:00:22:aa:bb:cc -> 00:00:11:aa:bb:cc

Declaration: ip4_show_fib_command src/vnet/adj/adj_nbr.c line 1092

Implementation: adj_nbr_show