FD.io VPP
v19.08-23-g4b943d6
Vector Packet Processing
|
The VPP Object Model (VOM) library. More...
Data Structures | |
class | arp_proxy_binding |
A representation of LLDP client configuration on an interface. More... | |
class | arp_proxy_config |
A representation of LLDP client configuration on an interface. More... | |
class | bond_group_binding |
A representation of bond interface binding. More... | |
class | bond_interface |
A bond-interface. More... | |
class | bond_member |
A bond-member. More... | |
class | bridge_domain |
A base class for all object_base in the VPP object_base-Model. More... | |
class | bridge_domain_arp_entry |
A entry in the ARP termination table of a Bridge Domain. More... | |
class | bridge_domain_entry |
A MAC forwarding entry in the bridge-domain/L2-FIB. More... | |
class | client_db |
A DB storing the objects that each owner/key owns. More... | |
class | cmd |
A representation of a method call to VPP. More... | |
class | connection |
A representation of the connection to VPP. More... | |
struct | counter_t |
class | cout_handler |
class | dhcp_client |
A representation of DHCP client on an interface. More... | |
struct | direction_t |
Feature Directions. More... | |
class | dump_cmd |
A base class for VPP dump commands. More... | |
class | enum_base |
A template base class for all enum types. More... | |
struct | ethertype_t |
Feature Ethertype. More... | |
class | event_cmd |
An Event command base class. More... | |
class | file_handler |
class | gbp_bridge_domain |
A entry in the ARP termination table of a Bridge Domain. More... | |
class | gbp_contract |
A entry in the ARP termination table of a Bridge Domain. More... | |
class | gbp_endpoint |
A GBP Enpoint (i.e. More... | |
class | gbp_endpoint_group |
A entry in the ARP termination table of a Bridge Domain. More... | |
class | gbp_ext_itf |
A enternal interface for GBP. More... | |
class | gbp_recirc |
A recirculation interface for GBP use pre/post NAT. More... | |
class | gbp_route_domain |
A entry in the ARP termination table of a Route Domain. More... | |
class | gbp_rule |
class | gbp_subnet |
A GBP Enpoint (i.e. More... | |
class | gbp_vxlan |
A representation of a GBP_VXLAN Tunnel in VPP. More... | |
struct | handle_t |
A type declaration of an interface handle in VPP. More... | |
class | HW |
class | igmp_binding |
A representation of IGMP binding on an interface. More... | |
class | igmp_listen |
A representation of igmp configuration on an interface. More... | |
class | inspect |
A means to inspect the state VPP has built, in total, and per-client. More... | |
class | interface |
A representation of an interface in VPP. More... | |
class | interface_factory |
class | interface_ip6_nd |
A representation of L3 configuration on an interface. More... | |
class | interface_span |
A representation of interface span configuration. More... | |
struct | invalid_decode |
class | ip_dscp_t |
IP DSCP values. More... | |
class | ip_punt_redirect |
A representation of IP punt_redirect configuration on an interface. More... | |
class | ip_unnumbered |
A representation of IP unnumbered configuration on an interface. More... | |
struct | l2_address_t |
Type def of a L2 address as read from VPP. More... | |
class | l2_binding |
A Clas representing the binding of an L2 interface to a bridge-domain and the properties of that binding. More... | |
class | l2_emulation |
A Clas representing the binding of an L2 interface to a bridge-domain and the properties of that binding. More... | |
class | l2_xconnect |
A Class representing the cross connnect of an L2 interface with another l2 interface. More... | |
class | l3_binding |
A representation of L3 configuration on an interface. More... | |
class | l3_proto_t |
An L3 protocol can be used to construct a prefix that is used to match packets are part of a route. More... | |
class | lldp_binding |
A representation of LLDP client configuration on an interface. More... | |
class | lldp_global |
A representation of LLDP global configuration. More... | |
struct | log_level_t |
class | log_t |
Ideally we'd use the boost logger but that is not prevelent in many distros. More... | |
struct | mac_address_t |
Type def of a Ethernet address. More... | |
class | nat_binding |
A Class representing the binding of an L2 interface to a bridge-domain and the properties of that binding. More... | |
class | nat_static |
A entry in the ARP termination table of a Bridge Domain. More... | |
class | neighbour |
A entry in the neighbour entry (ARP or IPv6 ND) More... | |
class | nh_proto_t |
Types belonging to Routing. More... | |
class | object_base |
A base class for all object_base in the VPP object_base-Model. More... | |
class | object_ref |
A represenation of a reference to a VPP object. More... | |
class | OM |
The interface to writing objects into VPP OM. More... | |
class | pipe |
A Pipe interface. More... | |
class | ra_config |
A representation of Router Advertisement configuration. More... | |
class | ra_prefix |
A representation of RA prefix configuration on given interface. More... | |
struct | rc_t |
Error codes that VPP will return during a HW write. More... | |
class | route_domain |
A route-domain is a VRF. More... | |
class | rpc_cmd |
A base class for all RPC commands to VPP. More... | |
class | singular_db |
A Database to store the unique 'singular' instances of a single object type. More... | |
class | srpc_cmd |
class | stat_client |
A representation of a stat client in VPP. More... | |
class | stat_reader |
Stat reader: single interface to get stats. More... | |
class | sub_interface |
A Sub-interface. More... | |
class | tap_interface |
A tap-interface. More... | |
class | vxlan_tunnel |
A representation of a VXLAN Tunnel in VPP. More... | |
Typedefs | |
typedef boost::asio::ip::address | ip_address_t |
typedef std::set< object_ref > | object_ref_list |
A convenitent typedef for set of objects owned. More... | |
typedef unsigned int(* | get_msg_size_t) (void *) |
A function type def for calculating a message's size. More... | |
typedef uint32_t | vnid_t |
EPG IDs are 32 bit integers. More... | |
typedef uint16_t | sclass_t |
typedef uint16_t | scope_t |
typedef interface_ip6_nd< ra_config, vapi::Sw_interface_ip6nd_ra_config > | ip6nd_ra_config |
Typedef the ip6nd_ra_config. More... | |
typedef interface_ip6_nd< ra_prefix, vapi::Sw_interface_ip6nd_ra_prefix > | ip6nd_ra_prefix |
Typedef the ip6nd_ra_prefix. More... | |
typedef enum VOM::end_t_ | end_t |
Enumerations | |
enum | obj_state_t { OBJECT_STATE_NONE = 0, OBJECT_STATE_STALE } |
object state More... | |
enum | end_t_ { EAST = 0, WEST } |
enum | dependency_t { dependency_t::GLOBAL = 0, dependency_t::INTERFACE, dependency_t::VIRTUAL_INTERFACE, dependency_t::TABLE, dependency_t::VIRTUAL_TABLE, dependency_t::ACL, dependency_t::BINDING, dependency_t::ENTRY } |
There needs to be a strict order in which object types are read from VPP (at boot time) and replayed to VPP (if VPP restarts). More... | |
Functions | |
std::ostream & | operator<< (std::ostream &os, const std::pair< direction_t, interface::key_t > &key) |
vapi_enum_ip_neighbor_flags | to_api (const neighbour::flags_t &f) |
const neighbour::flags_t | from_api (vapi_enum_ip_neighbor_flags f) |
void | to_api (const boost::asio::ip::address_v4 &a, vapi_type_ip4_address &v) |
void | to_api (const boost::asio::ip::address_v6 &a, vapi_type_ip6_address &v) |
void | to_api (const ip_address_t &a, vapi_type_address &v) |
void | to_api (const ip_address_t &a, vapi_union_address_union &u, vapi_enum_address_family &af) |
void | to_api (const ip_address_t &a, vapi_union_address_union &u) |
boost::asio::ip::address_v6 | from_api (const vapi_type_ip6_address &v) |
boost::asio::ip::address_v4 | from_api (const vapi_type_ip4_address &v) |
ip_address_t | from_api (const vapi_type_address &v) |
ip_address_t | from_api (const vapi_union_address_union &u, vapi_enum_fib_path_nh_proto proto) |
ip_address_t | from_api (const vapi_union_address_union &u, vapi_enum_address_family af) |
void | to_api (const mac_address_t &a, vapi_type_mac_address &v) |
mac_address_t | from_api (const vapi_type_mac_address &v) |
route::prefix_t | from_api (const vapi_type_prefix &v) |
vapi_type_prefix | to_api (const route::prefix_t &p) |
route::mprefix_t | from_api (const vapi_type_mprefix &v) |
vapi_type_mprefix | to_api (const route::mprefix_t &p) |
vapi_enum_fib_path_nh_proto | to_api (const nh_proto_t &p) |
const nh_proto_t & | from_api (vapi_enum_fib_path_nh_proto p) |
std::ostream & | operator<< (std::ostream &os, const arp_proxy_config::key_t &key) |
std::ostream & | operator<< (std::ostream &os, const bridge_domain_arp_entry::key_t &key) |
std::ostream & | operator<< (std::ostream &os, const bridge_domain_entry::key_t &key) |
std::ostream & | operator<< (std::ostream &os, const cmd &cmd) |
Free ostream function to print a command. More... | |
std::ostream & | operator<< (std::ostream &os, const gbp_contract::key_t &key) |
std::ostream & | operator<< (std::ostream &os, const gbp_endpoint::key_t &key) |
std::ostream & | operator<< (std::ostream &os, const gbp_subnet::key_t &key) |
std::ostream & | operator<< (std::ostream &os, const igmp_listen::key_t &key) |
Ostream output for the key. More... | |
std::ostream & | operator<< (std::ostream &os, const interface::stats_t &stats) |
stream insertion operator for interface stats More... | |
std::ostream & | operator<< (std::ostream &os, const interface_span::key_t &key) |
Ostream output for the key. More... | |
std::ostream & | operator<< (std::ostream &os, const l3_binding::key_t &key) |
Ostream output for the key. More... | |
log_t & | logger () |
Return a log object into which VPP objects can write. More... | |
static std::string | get_filename (const std::string &file) |
static std::string | get_timestamp () |
std::ostream & | operator<< (std::ostream &os, const nat_binding::key_t &key) |
std::ostream & | operator<< (std::ostream &os, const nat_static::key_t &key) |
std::ostream & | operator<< (std::ostream &os, const object_base &o) |
ostream print of a VPP Obect More... | |
static const std::string | pipe_mk_name (uint32_t instance) |
std::ostream & | operator<< (std::ostream &os, const l3_proto_t &l3p) |
Ostream output for l3_proto_t. More... | |
boost::asio::ip::address | from_bytes (uint8_t is_ip6, const uint8_t *array) |
Convert a VPP byte stinrg into a boost addresss. More... | |
void | to_bytes (const boost::asio::ip::address_v6 &addr, uint8_t *array) |
void | to_bytes (const boost::asio::ip::address_v4 &addr, uint8_t *array) |
void | to_bytes (const boost::asio::ip::address &addr, uint8_t *is_ip6, uint8_t *array) |
Convert a boost address into a VPP bytes string. More... | |
uint32_t | mask_width (const boost::asio::ip::address &addr) |
Get the prefix mask length of a host route from the boost address. More... | |
std::ostream & | operator<< (std::ostream &os, const route::prefix_t &pfx) |
Ostream printer for prefix_t. More... | |
boost::asio::ip::address_v4 | operator| (const boost::asio::ip::address_v4 &addr1, const boost::asio::ip::address_v4 &addr2) |
boost::asio::ip::address_v4 | operator& (const boost::asio::ip::address_v4 &addr1, const boost::asio::ip::address_v4 &addr2) |
boost::asio::ip::address_v4 | operator~ (const boost::asio::ip::address_v4 &addr1) |
boost::asio::ip::address_v6 | operator| (const boost::asio::ip::address_v6 &addr1, const boost::asio::ip::address_v6 &addr2) |
boost::asio::ip::address_v6 | operator& (const boost::asio::ip::address_v6 &addr1, const boost::asio::ip::address_v6 &addr2) |
boost::asio::ip::address_v6 | operator~ (const boost::asio::ip::address_v6 &addr1) |
boost::asio::ip::address | operator| (const boost::asio::ip::address &addr1, const boost::asio::ip::address &addr2) |
boost::asio::ip::address | operator& (const boost::asio::ip::address &addr1, const boost::asio::ip::address &addr2) |
boost::asio::ip::address | operator~ (const boost::asio::ip::address &addr1) |
std::ostream & | operator<< (std::ostream &os, const QoS::mark::key_t &key) |
const route::itf_flags_t & | from_api (vapi_enum_mfib_itf_flags val) |
vapi_enum_mfib_itf_flags | to_api (const route::itf_flags_t &in) |
void | to_api (const route::path &p, vapi_type_fib_path &payload) |
route::path | from_api (const vapi_type_fib_path &p) |
vapi_enum_ip_dscp | to_api (const ip_dscp_t &d) |
const ip_dscp_t & | from_api (vapi_enum_ip_dscp d) |
template<typename DB > | |
void | db_dump (const DB &db, std::ostream &os) |
Print each of the objects in the DB into the stream provided. More... | |
std::ostream & | operator<< (std::ostream &os, const handle_t &h) |
ostream print of a handle_t More... | |
std::ostream & | operator<< (std::ostream &os, const mac_address_t &mac) |
Ostream operator for a MAC address. More... | |
std::ostream & | operator<< (std::ostream &os, const l2_address_t &l2) |
Ostream operator for a MAC address. More... | |
std::ostream & | operator<< (std::ostream &os, const direction_t &dir) |
Output ostream for direction_t. More... | |
std::ostream & | operator<< (std::ostream &os, const ethertype_t ð) |
Output ostream for ethertype_t. More... | |
std::ostream & | operator<< (std::ostream &os, const counter_t &c) |
Ostream operator for a MAC address. More... | |
std::ostream & | operator<< (std::ostream &os, const vxlan_tunnel::endpoint_t &ep) |
Ostream output for a tunnel endpoint. More... | |
Variables | |
const std::string | GBP_VXLAN_NAME = "gbp-vxlan" |
static log_t | slog |
const std::string | VXLAN_TUNNEL_NAME = "vxlan-tunnel-itf" |
The VPP Object Model (VOM) library.
A set of helper function to iterate over objects in the DB.
Before we begin, a glossary of terms:
The VOM is a C++ library that models entities in VPP as C++ classes. The relationships between VOM objects and VPP entities is not always 1:1. Some effort has been made to construct a higher level, more abstract API to VPP programming*. The client programming model is simple (or at least I intended it to be..). The client deals in ‘desired’ state, that is, it expresses the objects it wants to exists (in VPP) and the properties that the object should have, i.e**; Interface af1(“my-af-packet-1”, AFPACKET, admin::UP); Then the client ‘writes’ this object into the ‘model’ OM::write(“clients-thing-1”, af1);
“clients-thing-1” is a description of the entity within the client’s domain that ‘owns’ (or has locked or has a reference to) the VOM object. There can be many owners of each VOM object. It will be the last owner’s update that will be programmed in VPP. This model means that the client is not burdened with maintaining which of its objects have created which VOM objects. If the client is itself driven by a CRUD API, then create notifications are implemented as above. Update notifications add two extra statements; OM::mark(“clients-thing-1”); … do writes …. OM::sweep(“clients-thing-1”); These ‘mark’ and ‘sweep’ statements are indications to OM that firstly, indicate that all the objects owned by “clients-thing-1” are now stale, i.e that the client may no longer need them. If one of the subsequent writes should update a stale object, then it is no longer stale. The sweep statement will ‘remove’ all the remaining stale objects. In this model, the client does not need to maintain the mapping of VOM objects to its own objects – it can simply express what it needs now. The delete notification is simply: OM::remove(“clients-thing-1”); Which will remove all the objects in VOM that are owned by “clients-thing-1”. Where ‘remove’ in this sense means unlock and unreference, the VOM object, and VPP state, will only be truly removed once there are no more owners. This is equivalent to a mark & sweep with no intermediate writes.
To provide this client side model the VOM is a stateful library, meaning that for each entity it creates in VPP, VOM maintains its own representation of that object. VOM can therefore be memory hungry. The desired state is expressed by the client, the ‘actual’ state is maintained by VOM. VOM will consolidate the two states when the client writes to the OM and thus issue VPP only the changes required.
The concepts of ownership and statefulness also allow the support for HA scenarios. VPP restart: When VPP restarts, VOM will reconnect and ‘replay’ its state, in dependency order, to VPP. The client does not need to regenerate its desired state. Client restart: when the client restarts, VOM will read/dump the current state of all VPP objects and store them in the OM owned by the special owner “boot”. As the client reprogrammes its desired state, objects will become owned by both the boot process and the client. At the point in time, as determined by the client, all stale state, that owned only by boot, can be purged. Hence the system reaches the correct final state, with no interruption to VPP forwarding.
Basic Design:
Each object in VOM (i.e. an interface, route, bridge-domain, etc) is stored in a per-type object database, with an object-type specific key. This ‘singular’ DB has a value-type of a weak pointer to the object. I use the term ‘singular’ to refer to the instance of the object stored in these databases, to be distinct from the instances the client constructs to represent desired state. The ‘client’ DB maintains the mapping of owner to object. The value type of the client DB is a shared pointer to the singular instance of the owned object. Once all the owners are gone, and all the shared pointers are destroyed, the singular instance is also destroyed.
Each VOM object has some basic behaviour: update: issue to VPP an update to this object’s state. This could include the create sweep: delete the VPP entity – called when the object is destroyed. replay: issue to VPP all the commands needed to re-programme (VPP restart HA scenario) populate: read state from VPP and add it to the OM (client restart HA scenario)
The object code is boiler-plate, in some cases (like the ACLs) even template. The objects are purposefully left as simple, functionality free as possible.
Communication with VPP is through a ‘queue’ of ‘commands’. A command is essentially an object wrapper around a VPP binary API call (although we do use the VAPI C++ bindings too). Commands come in three flavours: RPC: do this; done. DUMP: give me all of these things; here you go EVENT; tell me about these events; here’s one …. Here’s one…. Oh here’s another….. etc.
RPC and DUMP commands are handled synchronously. Therefore on return from OM::write(…) VPP has been issued with the request and responded. EVENTs are asynchronous and will be delivered to the listeners in a different thread – so beware!!
As such VOM provides some level of insulation to the changes to the VPP binary API. some of the type names are shorten for brevity’s sake.
These functions are delcared not as DB member functions so that the template instatiation of the DB does not require the definitions of the functions used to be declared.
typedef enum VOM::end_t_ VOM::end_t |
typedef unsigned int(* VOM::get_msg_size_t) (void *) |
A function type def for calculating a message's size.
Definition at line 30 of file dump_cmd.hpp.
typedef interface_ip6_nd<ra_config, vapi::Sw_interface_ip6nd_ra_config> VOM::ip6nd_ra_config |
Typedef the ip6nd_ra_config.
Definition at line 353 of file interface_ip6_nd.hpp.
typedef interface_ip6_nd<ra_prefix, vapi::Sw_interface_ip6nd_ra_prefix> VOM::ip6nd_ra_prefix |
Typedef the ip6nd_ra_prefix.
Definition at line 359 of file interface_ip6_nd.hpp.
Definition at line 31 of file api_types.hpp.
typedef std::set<object_ref> VOM::object_ref_list |
A convenitent typedef for set of objects owned.
A set of shared pointers. This is how the reference counting of an object in the model it managed. Once all these shared ptr and hence references are gone, the object is deleted and any state in VPP is removed.
Definition at line 32 of file client_db.hpp.
typedef uint16_t VOM::sclass_t |
Definition at line 27 of file gbp_types.hpp.
typedef uint16_t VOM::scope_t |
Definition at line 28 of file gbp_types.hpp.
typedef uint32_t VOM::vnid_t |
EPG IDs are 32 bit integers.
Definition at line 26 of file gbp_types.hpp.
|
strong |
There needs to be a strict order in which object types are read from VPP (at boot time) and replayed to VPP (if VPP restarts).
That ordering is defined in this enum types
enum VOM::end_t_ |
enum VOM::obj_state_t |
object state
Definition at line 68 of file object_base.hpp.
void VOM::db_dump | ( | const DB & | db, |
std::ostream & | os | ||
) |
Print each of the objects in the DB into the stream provided.
Definition at line 35 of file singular_db_funcs.hpp.
const route::itf_flags_t & VOM::from_api | ( | vapi_enum_mfib_itf_flags | val | ) |
Definition at line 23 of file route_api_types.cpp.
const neighbour::flags_t VOM::from_api | ( | vapi_enum_ip_neighbor_flags | f | ) |
route::path VOM::from_api | ( | const vapi_type_fib_path & | p | ) |
boost::asio::ip::address_v6 VOM::from_api | ( | const vapi_type_ip6_address & | v | ) |
Definition at line 101 of file api_types.cpp.
boost::asio::ip::address_v4 VOM::from_api | ( | const vapi_type_ip4_address & | v | ) |
Definition at line 111 of file api_types.cpp.
ip_address_t VOM::from_api | ( | const vapi_type_address & | v | ) |
Definition at line 121 of file api_types.cpp.
const ip_dscp_t & VOM::from_api | ( | vapi_enum_ip_dscp | d | ) |
Definition at line 132 of file route_api_types.cpp.
ip_address_t VOM::from_api | ( | const vapi_union_address_union & | u, |
vapi_enum_fib_path_nh_proto | proto | ||
) |
Definition at line 141 of file api_types.cpp.
ip_address_t VOM::from_api | ( | const vapi_union_address_union & | u, |
vapi_enum_address_family | af | ||
) |
Definition at line 161 of file api_types.cpp.
mac_address_t VOM::from_api | ( | const vapi_type_mac_address & | v | ) |
Definition at line 187 of file api_types.cpp.
route::prefix_t VOM::from_api | ( | const vapi_type_prefix & | v | ) |
route::mprefix_t VOM::from_api | ( | const vapi_type_mprefix & | v | ) |
const nh_proto_t & VOM::from_api | ( | vapi_enum_fib_path_nh_proto | p | ) |
Definition at line 242 of file api_types.cpp.
boost::asio::ip::address VOM::from_bytes | ( | uint8_t | is_ip6, |
const uint8_t * | bytes | ||
) |
Convert a VPP byte stinrg into a boost addresss.
Definition at line 224 of file prefix.cpp.
|
static |
Definition at line 82 of file logger.cpp.
|
static |
log_t & VOM::logger | ( | ) |
Return a log object into which VPP objects can write.
Definition at line 39 of file logger.cpp.
uint32_t VOM::mask_width | ( | const boost::asio::ip::address & | addr | ) |
Get the prefix mask length of a host route from the boost address.
Definition at line 273 of file prefix.cpp.
boost::asio::ip::address_v4 VOM::operator& | ( | const boost::asio::ip::address_v4 & | addr1, |
const boost::asio::ip::address_v4 & | addr2 | ||
) |
Definition at line 318 of file prefix.cpp.
boost::asio::ip::address_v6 VOM::operator& | ( | const boost::asio::ip::address_v6 & | addr1, |
const boost::asio::ip::address_v6 & | addr2 | ||
) |
Definition at line 351 of file prefix.cpp.
boost::asio::ip::address VOM::operator& | ( | const boost::asio::ip::address & | addr1, |
const boost::asio::ip::address & | addr2 | ||
) |
Definition at line 388 of file prefix.cpp.
std::ostream & VOM::operator<< | ( | std::ostream & | os, |
const cmd & | cmd | ||
) |
std::ostream & VOM::operator<< | ( | std::ostream & | os, |
const object_base & | o | ||
) |
ostream print of a VPP Obect
Definition at line 56 of file object_base.cpp.
std::ostream & VOM::operator<< | ( | std::ostream & | os, |
const l3_proto_t & | l3p | ||
) |
Ostream output for l3_proto_t.
Definition at line 70 of file prefix.cpp.
std::ostream & VOM::operator<< | ( | std::ostream & | os, |
const interface_span::key_t & | key | ||
) |
Ostream output for the key.
Definition at line 100 of file interface_span.cpp.
std::ostream & VOM::operator<< | ( | std::ostream & | os, |
const handle_t & | h | ||
) |
std::ostream & VOM::operator<< | ( | std::ostream & | os, |
const arp_proxy_config::key_t & | key | ||
) |
Definition at line 150 of file arp_proxy_config.cpp.
std::ostream & VOM::operator<< | ( | std::ostream & | os, |
const l3_binding::key_t & | key | ||
) |
Ostream output for the key.
Definition at line 154 of file l3_binding.cpp.
std::ostream & VOM::operator<< | ( | std::ostream & | os, |
const QoS::mark::key_t & | key | ||
) |
Definition at line 175 of file qos_record.cpp.
std::ostream & VOM::operator<< | ( | std::ostream & | os, |
const mac_address_t & | mac | ||
) |
std::ostream& VOM::operator<< | ( | std::ostream & | os, |
const nat_static::key_t & | key | ||
) |
std::ostream & VOM::operator<< | ( | std::ostream & | os, |
const igmp_listen::key_t & | key | ||
) |
Ostream output for the key.
Definition at line 141 of file neighbour.cpp.
std::ostream & VOM::operator<< | ( | std::ostream & | os, |
const nat_binding::key_t & | key | ||
) |
std::ostream & VOM::operator<< | ( | std::ostream & | os, |
const std::pair< direction_t, interface::key_t > & | key | ||
) |
std::ostream & VOM::operator<< | ( | std::ostream & | os, |
const bridge_domain_arp_entry::key_t & | key | ||
) |
Definition at line 207 of file bridge_domain_arp_entry.cpp.
std::ostream & VOM::operator<< | ( | std::ostream & | os, |
const gbp_endpoint::key_t & | key | ||
) |
Definition at line 209 of file gbp_endpoint.cpp.
std::ostream & VOM::operator<< | ( | std::ostream & | os, |
const bridge_domain_entry::key_t & | key | ||
) |
Definition at line 210 of file bridge_domain_entry.cpp.
std::ostream & VOM::operator<< | ( | std::ostream & | os, |
const gbp_contract::key_t & | key | ||
) |
std::ostream & VOM::operator<< | ( | std::ostream & | os, |
const l2_address_t & | l2 | ||
) |
std::ostream& VOM::operator<< | ( | std::ostream & | os, |
const vxlan_tunnel::endpoint_t & | ep | ||
) |
Ostream output for a tunnel endpoint.
std::ostream & VOM::operator<< | ( | std::ostream & | os, |
const direction_t & | dir | ||
) |
Output ostream for direction_t.
Definition at line 272 of file types.cpp.
std::ostream & VOM::operator<< | ( | std::ostream & | os, |
const gbp_subnet::key_t & | key | ||
) |
Definition at line 284 of file gbp_subnet.cpp.
std::ostream & VOM::operator<< | ( | std::ostream & | os, |
const ethertype_t & | ether | ||
) |
Output ostream for ethertype_t.
Definition at line 293 of file types.cpp.
std::ostream & VOM::operator<< | ( | std::ostream & | os, |
const route::prefix_t & | pfx | ||
) |
Ostream printer for prefix_t.
Definition at line 301 of file prefix.cpp.
std::ostream & VOM::operator<< | ( | std::ostream & | os, |
const counter_t & | c | ||
) |
std::ostream & VOM::operator<< | ( | std::ostream & | os, |
const interface::stats_t & | stats | ||
) |
stream insertion operator for interface stats
Definition at line 467 of file interface.cpp.
boost::asio::ip::address_v4 VOM::operator| | ( | const boost::asio::ip::address_v4 & | addr1, |
const boost::asio::ip::address_v4 & | addr2 | ||
) |
Definition at line 309 of file prefix.cpp.
boost::asio::ip::address_v6 VOM::operator| | ( | const boost::asio::ip::address_v6 & | addr1, |
const boost::asio::ip::address_v6 & | addr2 | ||
) |
Definition at line 336 of file prefix.cpp.
boost::asio::ip::address VOM::operator| | ( | const boost::asio::ip::address & | addr1, |
const boost::asio::ip::address & | addr2 | ||
) |
Definition at line 379 of file prefix.cpp.
boost::asio::ip::address_v4 VOM::operator~ | ( | const boost::asio::ip::address_v4 & | addr1 | ) |
Definition at line 327 of file prefix.cpp.
boost::asio::ip::address_v6 VOM::operator~ | ( | const boost::asio::ip::address_v6 & | addr1 | ) |
Definition at line 366 of file prefix.cpp.
boost::asio::ip::address VOM::operator~ | ( | const boost::asio::ip::address & | addr1 | ) |
Definition at line 397 of file prefix.cpp.
|
static |
vapi_enum_ip_neighbor_flags VOM::to_api | ( | const neighbour::flags_t & | f | ) |
vapi_enum_mfib_itf_flags VOM::to_api | ( | const route::itf_flags_t & | in | ) |
Definition at line 32 of file route_api_types.cpp.
void VOM::to_api | ( | const route::path & | p, |
vapi_type_fib_path & | payload | ||
) |
void VOM::to_api | ( | const boost::asio::ip::address_v4 & | a, |
vapi_type_ip4_address & | v | ||
) |
Definition at line 54 of file api_types.cpp.
void VOM::to_api | ( | const boost::asio::ip::address_v6 & | a, |
vapi_type_ip6_address & | v | ||
) |
Definition at line 59 of file api_types.cpp.
void VOM::to_api | ( | const ip_address_t & | a, |
vapi_type_address & | v | ||
) |
Definition at line 65 of file api_types.cpp.
void VOM::to_api | ( | const ip_address_t & | a, |
vapi_union_address_union & | u, | ||
vapi_enum_address_family & | af | ||
) |
Definition at line 77 of file api_types.cpp.
void VOM::to_api | ( | const ip_address_t & | a, |
vapi_union_address_union & | u | ||
) |
Definition at line 91 of file api_types.cpp.
vapi_enum_ip_dscp VOM::to_api | ( | const ip_dscp_t & | d | ) |
Definition at line 127 of file route_api_types.cpp.
void VOM::to_api | ( | const mac_address_t & | a, |
vapi_type_mac_address & | v | ||
) |
Definition at line 181 of file api_types.cpp.
vapi_type_prefix VOM::to_api | ( | const route::prefix_t & | p | ) |
vapi_type_mprefix VOM::to_api | ( | const route::mprefix_t & | p | ) |
vapi_enum_fib_path_nh_proto VOM::to_api | ( | const nh_proto_t & | p | ) |
Definition at line 227 of file api_types.cpp.
void VOM::to_bytes | ( | const boost::asio::ip::address_v6 & | addr, |
uint8_t * | array | ||
) |
void VOM::to_bytes | ( | const boost::asio::ip::address_v4 & | addr, |
uint8_t * | array | ||
) |
Definition at line 255 of file prefix.cpp.
void VOM::to_bytes | ( | const boost::asio::ip::address & | addr, |
uint8_t * | is_ip6, | ||
uint8_t * | array | ||
) |
Convert a boost address into a VPP bytes string.
Definition at line 261 of file prefix.cpp.
const std::string VOM::GBP_VXLAN_NAME = "gbp-vxlan" |
Definition at line 24 of file gbp_vxlan.cpp.
|
static |
Definition at line 36 of file logger.cpp.
const std::string VOM::VXLAN_TUNNEL_NAME = "vxlan-tunnel-itf" |
Definition at line 25 of file vxlan_tunnel.cpp.