6.7. ip6¶
6.7.1. 2n1l-10ge2p1x710-ethip6-ip6base-adlalwlistbase-scapy suite¶
ADL Security IPv6 allowlist test cases [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes. [Enc] Packet Encapsulations: Eth-IPv6 on all links. [Cfg] DUT configuration: DUT1 is configured with IPv6 routing and static routes. ADL security allowlists are applied on DUT1 ingress interface from TG. [Ver] TG verification: Test IPv6 packets are sent in one direction by TG on link to DUT1; on receive TG verifies packets for correctness and drops as applicable. [Ref] Applicable standard specifications:
# Copyright (c) 2021 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
*** Settings ***
| Resource | resources/libraries/robot/shared/default.robot
|
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
| ... | NIC_Intel-X710 | ETH | IP6FWD | FEATURE | ADLALWLIST | DRV_VFIO_PCI
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip6-ip6base-adlalwlistbase
|
| Suite Setup | Setup suite topology interfaces | scapy
| Test Setup | Setup test
| Test Teardown | Tear down test | packet_trace | telemetry
|
| Test Template | Local Template
|
| *** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | adl_plugin.so
| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
| ${nic_rxq_size}= | 0
| ${nic_txq_size}= | 0
| ${nic_pfs}= | 2
| ${nic_vfs}= | 0
| ${overhead}= | ${0}
# Telemetry
| ${telemetry_profile}= | vpp_test_teardown6.7.1.1. Local Template¶
[Ver] Make TG send IPv6 on its interface to DUT1; verify received IPv6 pkts are correct. Arguments: - frame_size - Framesize in Bytes in integer. Type: integer - phy_cores - Number of physical cores. Type: integer - rxq - Number of RX queues, default value: ${None}. Type: integer
Set Test Variable \${frame_size}
Given Set Max Rate And Jumbo
And Add worker threads to all DUTs ${phy_cores} ${rxq}
And Pre-initialize layer driver ${nic_driver}
And Apply startup configuration on all VPP DUTs with_trace=${True}
When Initialize layer driver ${nic_driver}
And Initialize layer interface
And Initialize IPv6 forwarding in circular topology
And Add Fib Table ${dut1} 1 ipv6=${TRUE}
And Vpp Route Add ${dut1} 2001:1:: 64 vrf=1 local=${TRUE}
And ADL Add allowlist Entry ${dut1} ${DUT1_${int}1}[0] ip6 1
And ADL interface enable or disable ${dut1} ${DUT1_${int}1}[0] enable
Then Send packet and verify headers ${tg} 2001:1::2 2001:2::2 ${TG_pf1}[0] ${TG_pf1_mac}[0] ${DUT1_vf1_mac}[0] ${TG_pf2}[0] ${DUT1_vf2_mac}[0] ${TG_pf2_mac}[0]
6.7.1.2. 78B-0c-ethip6-ip6base-adlalwlistbase-scapy¶
frame_size=${78} phy_cores=${0}
6.7.2. 2n1l-10ge2p1x710-ethip6-ip6base-adlblklistbase-scapy suite¶
ADL Security IPv6 allowlist test cases [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes. [Enc] Packet Encapsulations: Eth-IPv6 on all links. [Cfg] DUT configuration: DUT1 is configured with IPv6 routing and static routes. ADL security allowlists are applied on DUT1 ingress interface from TG. [Ver] TG verification: Test IPv6 packets are sent in one direction by TG on link to DUT1; on receive TG verifies packets for correctness and drops as applicable. [Ref] Applicable standard specifications:
# Copyright (c) 2021 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
*** Settings ***
| Resource | resources/libraries/robot/shared/default.robot
|
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
| ... | NIC_Intel-X710 | ETH | IP6FWD | FEATURE | ADLBLKLIST | DRV_VFIO_PCI
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip6-ip6base-adlblklistbase
|
| Suite Setup | Setup suite topology interfaces | scapy
| Test Setup | Setup test
| Test Teardown | Tear down test | packet_trace | telemetry
|
| Test Template | Local Template
|
| *** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | adl_plugin.so
| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
| ${nic_rxq_size}= | 0
| ${nic_txq_size}= | 0
| ${nic_pfs}= | 2
| ${nic_vfs}= | 0
| ${overhead}= | ${0}
# Telemetry
| ${telemetry_profile}= | vpp_test_teardown6.7.2.1. Local Template¶
[Ver] Make TG send IPv6 on its interface to DUT1; verify received IPv6 pkts are correct. Arguments: - frame_size - Framesize in Bytes in integer. Type: integer - phy_cores - Number of physical cores. Type: integer - rxq - Number of RX queues, default value: ${None}. Type: integer
Set Test Variable \${frame_size}
Given Set Max Rate And Jumbo
And Add worker threads to all DUTs ${phy_cores} ${rxq}
And Pre-initialize layer driver ${nic_driver}
And Apply startup configuration on all VPP DUTs with_trace=${True}
When Initialize layer driver ${nic_driver}
And Initialize layer interface
And Initialize IPv6 forwarding in circular topology
And Add Fib Table ${dut1} 1 ipv6=${True}
And Vpp Route Add ${dut1} 2002:1::0 64 vrf=1 local=${True}
And ADL Add allowlist Entry ${dut1} ${DUT1_${int}1}[0] ip6 1
And ADL interface enable or disable ${dut1} ${DUT1_${int}1}[0] enable
Then Packet transmission from port to port should fail ${tg} 2002:1::2 2002:2::2 ${TG_pf1}[0] ${TG_pf1_mac}[0] ${DUT1_vf1_mac}[0] ${TG_pf2}[0] ${DUT1_vf2_mac}[0] ${TG_pf2_mac}[0]
6.7.2.2. 78B-0c-ethip6-ip6base-adlblklistbase-scapy¶
frame_size=${78} phy_cores=${0}
6.7.3. 2n1l-10ge2p1x710-ethip6-ip6base-iacldstbase-scapy suite¶
IPv6 iAcl whitelist test cases [Top] Network Topologies: TG-DUT1-TG 2-node circular topologywith single links between nodes. [Enc] Packet Encapsulations: Eth-IPv6 on all links. [Cfg] DUT configuration: DUT1 is configured with IPv6 routing and static routes. IPv6 iAcl security whitelist is applied on DUT1 ingress interface from TG. [Ver] TG verification: Test IPv6 packets are sent in one direction by TG on link to DUT1; on receive TG verifies packets for correctness and drops as applicable. [Ref] Applicable standard specifications:
# Copyright (c) 2021 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
*** Settings ***
| Resource | resources/libraries/robot/shared/default.robot
|
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
| ... | NIC_Intel-X710 | ETH | IP6FWD | FEATURE | IACLDST | DRV_VFIO_PCI
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip6-ip6base-iacldstbase
|
| Suite Setup | Setup suite topology interfaces | scapy
| Test Setup | Setup test
| Test Teardown | Tear down test | packet_trace | telemetry | classify
|
| Test Template | Local Template
|
| *** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
| ${nic_rxq_size}= | 0
| ${nic_txq_size}= | 0
| ${nic_pfs}= | 2
| ${nic_vfs}= | 0
| ${overhead}= | ${0}
# Telemetry
| ${telemetry_profile}= | vpp_test_teardown6.7.3.1. Local Template¶
[Ver] Make TG send IPv6 on its interface to DUT1; verify received IPv6 pkts are correct. Arguments: - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). Type: integer, string - phy_cores - Number of physical cores. Type: integer - rxq - Number of RX queues, default value: ${None}. Type: integer
Set Test Variable \${frame_size}
Given Set Max Rate And Jumbo
And Add worker threads to all DUTs ${phy_cores} ${rxq}
And Pre-initialize layer driver ${nic_driver}
And Apply startup configuration on all VPP DUTs with_trace=${True}
When Initialize layer driver ${nic_driver}
And Initialize layer interface
And Initialize IPv6 forwarding in circular topology
${table_idx} ${skip_n} ${match_n}= And Vpp Creates Classify Table L3 ${dut1} ip6 dst ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
And Vpp Configures Classify Session L3 ${dut1} permit ${table_idx} ${skip_n} ${match_n} ip6 dst 2001:2::2
And Vpp Enable Input Acl Interface ${dut1} ${DUT1_${int}1}[0] ip6 ${table_idx}
Then Send packet and verify headers ${tg} 2001:1::2 2001:2::2 ${TG_pf1}[0] ${TG_pf1_mac}[0] ${DUT1_vf1_mac}[0] ${TG_pf2}[0] ${DUT1_vf2_mac}[0] ${TG_pf2_mac}[0]
6.7.3.2. 78B-0c-ethip6-ip6base-iacldstbase-scapy¶
frame_size=${78} phy_cores=${0}
6.7.4. 2n1l-10ge2p1x710-ethip6-ip6base-ipolicemarkbase-scapy suite¶
IPv4 policer test cases [Top] Network Topologies: TG-DUT1-TG 2-node circular topologywith single links between nodes. [Enc] Packet Encapsulations: Eth-IPv6 on all links. [Cfg] DUT configuration: On DUT1 configure interfaces IPv6 adresses, and static ARP record on the second interface. On DUT1 configure 2R3C color-aware policer on the first interface. [Ver] TG verification: Test packet is sent from TG on the first link to DUT1. Packet is received on TG on the second link from DUT1. [Ref] Applicable standard specifications: RFC2474, RFC2697, RFC2698.
# Copyright (c) 2021 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
*** Settings ***
| Resource | resources/libraries/robot/shared/default.robot
|
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
| ... | NIC_Intel-X710 | ETH | IP6FWD | FEATURE | POLICE_MARK | DRV_VFIO_PCI
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip6-ip6base-ipolicemarkbase
|
| Suite Setup | Setup suite topology interfaces | scapy
| Test Setup | Setup test
| Test Teardown | Tear down test | packet_trace | telemetry | classify
|
| Test Template | Local Template
|
| *** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
| ${nic_rxq_size}= | 0
| ${nic_txq_size}= | 0
| ${nic_pfs}= | 2
| ${nic_vfs}= | 0
| ${overhead}= | ${0}
| ${cir}= | ${100}
| ${eir}= | ${150}
| ${dscp}= | AF22
# Telemetry
| ${telemetry_profile}= | vpp_test_teardown6.7.4.1. Local Template¶
[Ver] Test packet is sent from TG on the first link to DUT1. Packet is received on TG on the second link from DUT1. Arguments: - frame_size - Framesize in Bytes in integer. Type: integer - phy_cores - Number of physical cores. Type: integer - rxq - Number of RX queues, default value: ${None}. Type: integer
Set Test Variable \${frame_size}
Given Set Max Rate And Jumbo
And Set Rates For Policer
And Add worker threads to all DUTs ${phy_cores} ${rxq}
And Pre-initialize layer driver ${nic_driver}
And Apply startup configuration on all VPP DUTs with_trace=${True}
When Initialize layer driver ${nic_driver}
And Initialize layer interface
And Initialize IPv6 forwarding in circular topology
And Initialize IPv6 policer 2r3c-'ca' in circular topology
Then Send packet and verify marking ${tg} ${TG_pf1}[0] ${TG_pf2}[0] ${TG_pf1_mac}[0] ${DUT1_${int}1_mac}[0] 2001:1::2 2001:2::2
6.7.4.2. 78B-0c-ethip6-ip6base-ipolicemarkbase-scapy¶
frame_size=${78} phy_cores=${0}
6.7.5. 2n1l-10ge2p1x710-ethip6-ip6base-scapy suite¶
IPv6 routing test cases [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes. [Enc] Packet Encapsulations: Eth-IPv6 for IPv6 routing on both links. [Cfg] DUT configuration: DUT1 is configured with IPv6 routing and two static IPv6 /64 route entries. [Ver] TG verification: Test IPv6 packet is sent in one direction by TG on links to DUT1; on receive TG verifies packet for correctness and their IPv6 src-addr, dst-addr and MAC addresses. [Ref] Applicable standard specifications: RFC2460, RFC4443, RFC4861
# Copyright (c) 2021 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
*** Settings ***
| Resource | resources/libraries/robot/shared/default.robot
|
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
| ... | NIC_Intel-X710 | ETH | IP6FWD | BASE | IP6BASE | DRV_VFIO_PCI
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip6-ip6base
|
| Suite Setup | Setup suite topology interfaces | scapy
| Test Setup | Setup test
| Test Teardown | Tear down test | packet_trace | telemetry
|
| Test Template | Local Template
|
| *** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
| ${nic_rxq_size}= | 0
| ${nic_txq_size}= | 0
| ${nic_pfs}= | 2
| ${nic_vfs}= | 0
| ${overhead}= | ${0}
# Telemetry
| ${telemetry_profile}= | vpp_test_teardown6.7.5.1. Local Template¶
[Ver] Make TG send IPv6 packet routed over DUT1 interfaces;Make TG verify IPv6 packet is correct. Arguments: - frame_size - Framesize in Bytes in integer. Type: integer - phy_cores - Number of physical cores. Type: integer - rxq - Number of RX queues, default value: ${None}. Type: integer
Set Test Variable \${frame_size}
Given Set Max Rate And Jumbo
And Add worker threads to all DUTs ${phy_cores} ${rxq}
And Pre-initialize layer driver ${nic_driver}
And Apply startup configuration on all VPP DUTs with_trace=${True}
When Initialize layer driver ${nic_driver}
And Initialize layer interface
And Initialize IPv6 forwarding in circular topology remote_host1_ip=3ffe:5f::1 remote_host2_ip=3ffe:5f::2
Then Send packet and verify headers ${tg} 3ffe:5f::1 3ffe:5f::2 ${TG_pf1}[0] ${TG_pf1_mac}[0] ${DUT1_vf1_mac}[0] ${TG_pf2}[0] ${DUT1_vf2_mac}[0] ${TG_pf2_mac}[0]
6.7.5.2. 78B-0c-ethip6-ip6base-scapy¶
frame_size=${78} phy_cores=${0}