6.11. l2xc

6.11.1. 2n1l-10ge2p1x710-ethip4-l2xcbase-scapy suite

L2 cross-connect test cases [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes. [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4.Both apply to all links. [Cfg] DUT configuration: DUT1 is configured with L2 cross-connect switching. [Ver] TG verification: Test IPv4 packets with IP protocol=61 are sent in both directions by TG on links to DUT1; on receive TG verifies packets for correctness and their IPv4 src-addr, dst-addr and MAC addresses. [Ref] Applicable standard specifications: RFC792

# Copyright (c) 2021 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

*** Settings ***
| Resource | resources/libraries/robot/shared/default.robot
|
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
| ... | NIC_Intel-X710 | ETH | L2XCFWD | BASE | DRV_VFIO_PCI
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip4-l2xcbase
|
| Suite Setup | Setup suite topology interfaces | scapy
| Test Setup | Setup test
| Test Teardown | Tear down test | packet_trace | telemetry
|
| Test Template | Local Template
|
| 

*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
| ${nic_rxq_size}= | 0
| ${nic_txq_size}= | 0
| ${nic_pfs}= | 2
| ${nic_vfs}= | 0
| ${overhead}= | ${0}
# Telemetry
| ${telemetry_profile}= | vpp_test_teardown

6.11.1.1. Local Template

[Ver] Make TG send IPv4 packets in both directions between twoof its interfaces to be switched by DUT to and from docker; verifyall packets are received. Arguments: - frame_size - Framesize in Bytes in integer. Type: integer - phy_cores - Number of physical cores. Type: integer - rxq - Number of RX queues, default value: ${None}. Type: integer

Set Test Variable  \${frame_size}
Given Set Max Rate And Jumbo
  And Add worker threads to all DUTs  ${phy_cores}  ${rxq}
  And Pre-initialize layer driver  ${nic_driver}
  And Apply startup configuration on all VPP DUTs  with_trace=${True}
 When Initialize layer driver  ${nic_driver}
  And Initialize layer interface
  And Initialize L2 cross connect
 Then Send IPv4 bidirectionally and verify received packets  ${tg}  ${TG_pf1}[0]  ${TG_pf2}[0]

6.11.1.2. 64B-0c-ethip4-l2xcbase-scapy

frame_size=${64}  phy_cores=${0}