6.6.1. lisp¶

6.6.1.1. 2n1l-10ge2p1x710-ethip4lisp-ip4base-scapy suite¶

ip4-lisp-ip4 encapsulation test cases [Top] Network Topologies: TG-DUT1-TG 2-nodecircular topology with single links between nodes. [Enc] Packet Encapsulations: Eth-IPv4-LISP-IPv4-ICMPv4on DUT1-TG, Eth-IPv4-ICMPv4 on TG-DUTn for IPv4 routingover LISPoIPv4 tunnel. [Cfg] DUT configuration: DUT is configured with IPv4routing and static routes. LISPoIPv4 tunnel isconfigured between DUT1 and TG2. [Ver] TG verification: Test ICMPv4 Echo Request packetsare sent by TG on if1 link to DUT1; on receive TG verifiespackets for correctness and their IPv4 src-addr, dst-addrand MAC addresses. [Ref] Applicable standard specifications: RFC6830.

# Copyright (c) 2021 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

*** Settings ***
| Resource | resources/libraries/robot/shared/default.robot
|
| Variables | resources/test_data/lisp/lisp.py
|
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
| ... | NIC_Intel-X710 | IP4FWD | LISP | LISP_IP4o4 | DRV_VFIO_PCI
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip4lisp-ip4base
|
| Suite Setup | Setup suite topology interfaces | scapy
| Test Setup | Setup test
| Test Teardown | Tear down test | packet_trace | telemetry
|
| Test Template | Local Template
|
|

*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | lisp_plugin.so
| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
| ${nic_rxq_size}= | 0
| ${nic_txq_size}= | 0
| ${nic_pfs}= | 2
| ${nic_vfs}= | 0
| ${overhead}= | ${54}
# Telemetry
| ${telemetry_profile}= | vpp_test_teardown

6.6.1.1.1. Local Template¶

[Cfg] On DUT1 configure LISP.Arguments: - frame_size - Framesize in Bytes in integer. Type: integer - phy_cores - Number of physical cores. Type: integer - rxq - Number of RX queues, default value: ${None}. Type: integer


Set Test Variable  \${frame_size}
Given Set Max Rate And Jumbo
  And Add worker threads to all DUTs  ${phy_cores}  ${rxq}
  And Pre-initialize layer driver  ${nic_driver}
  And Apply startup configuration on all VPP DUTs  with_trace=${True}
 When Initialize layer driver  ${nic_driver}
  And Initialize layer interface
  And Configure topology for IPv4 LISP testing
  And Configure LISP in 2-node circular topology  ${dut1}  ${DUT1_${int}2}[0]  ${NONE}  ${duts_locator_set}  ${dut1_ip4_eid}  ${dut1_to_tg_ip4_static_adjacency}
 Then Send packet and verify LISP encap  ${tg}  ${tg_if1_ip4}  ${dst_ip4}  ${TG_pf1}[0]  ${TG_pf1_mac}[0]  ${DUT1_vf1_mac}[0]  ${TG_pf2}[0]  ${DUT1_vf2_mac}[0]  ${TG_pf2_mac}[0]  ${src_rloc4}  ${dst_rloc4}

6.6.1.1.2. 64B-0c-ethip4lisp-ip4base-scapy¶


frame_size=${64}  phy_cores=${0}

6.6.1.2. 2n1l-10ge2p1x710-ethip4lispgpe-ip4base-scapy suite¶

ip4-lispgpe-ip4 encapsulation test cases [Top] Network Topologies: TG-DUT1-TG 2-nodecircular topology with single links between nodes. [Enc] Packet Encapsulations: Eth-IPv4-LISPGPE-IPv4-ICMPv4on DUT1-TG, Eth-IPv4-ICMPv4 on TG-DUTn for IPv4routing over LISPoIPv4 tunnel. [Cfg] DUT configuration: DUT1 and TG(if2) are configuredwith IPv4 routing and static routes. LISPoIPv4 tunnel isconfigured between DUT1 and TG. [Ver] TG verification: Test ICMPv4 Echo Request packetsare sent in TG->DUT(if1); On receive TG(if2) verifies packetsfor correctness and their IPv4 src-addr, dst-addr andMAC addresses. [Ref] Applicable standard specifications: RFC6830.

# Copyright (c) 2021 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

*** Settings ***
| Resource | resources/libraries/robot/shared/default.robot
|
| Variables | resources/test_data/lisp/lisp.py
|
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
| ... | NIC_Intel-X710 | IP4FWD | LISP | LISPGPE_IP4o4 | DRV_VFIO_PCI
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip4lispgpe-ip4base
|
| Suite Setup | Setup suite topology interfaces | scapy
| Test Setup | Setup test
| Test Teardown | Tear down test | packet_trace | telemetry
|
| Test Template | Local Template
|
|

*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | lisp_plugin.so
| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
| ${nic_rxq_size}= | 0
| ${nic_txq_size}= | 0
| ${nic_pfs}= | 2
| ${nic_vfs}= | 0
| ${overhead}= | ${54}
| ${is_gpe}= | ${1}
# Telemetry
| ${telemetry_profile}= | vpp_test_teardown

6.6.1.2.1. Local Template¶

[Cfg] On DUT1 configure LISP. Arguments: - frame_size - Framesize in Bytes in integer. Type: integer - phy_cores - Number of physical cores. Type: integer - rxq - Number of RX queues, default value: ${None}. Type: integer


Set Test Variable  \${frame_size}
Given Set Max Rate And Jumbo
  And Add worker threads to all DUTs  ${phy_cores}  ${rxq}
  And Pre-initialize layer driver  ${nic_driver}
  And Apply startup configuration on all VPP DUTs  with_trace=${True}
 When Initialize layer driver  ${nic_driver}
  And Initialize layer interface
  And Configure topology for IPv4 LISP testing
  And Configure LISP in 2-node circular topology  ${dut1}  ${DUT1_${int}2}[0]  ${NONE}  ${duts_locator_set}  ${dut1_ip4_eid}  ${dut1_to_tg_ip4_static_adjacency}  ${is_gpe}
 Then Send packet and verify LISP GPE encap  ${tg}  ${tg_if1_ip4}  ${dst_ip4}  ${TG_pf1}[0]  ${TG_pf1_mac}[0]  ${DUT1_vf1_mac}[0]  ${TG_pf2}[0]  ${DUT1_vf2_mac}[0]  ${TG_pf2_mac}[0]  ${src_rloc4}  ${dst_rloc4}

6.6.1.2.2. 64B-0c-ethip4lispgpe-ip4base-scapy¶


frame_size=${64}  phy_cores=${0}

6.6.1.3. 2n1l-10ge2p1x710-ethip4lispgpe-ip6base-scapy suite¶

ip4-lispgpe-ip6 encapsulation test cases [Top] Network Topologies: TG(if1)-DUT1-TG(if2) 2-nodecircular topology with single links between nodes. [Enc] Packet Encapsulations: Eth-IPv4-LISPGPE-IPv6-ICMPv6on DUT1-TG(if2),Eth-IPv6-ICMPv6 on TG-DUTn for IPv6routing over LISPoIPv4 tunnel. [Cfg] DUT configuration: DUT1 and TG(if2) are configuredwith IPv6 routing and static routes. LISPoIPv4 tunnel isconfigured between DUT1 and TG(if2). [Ver] TG verification: Test ICMPv6 Echo Request packetsare sent in if1 by TG on links to DUT1; on receiveTG verifies packets for correctness and their IPv6 src-addr,dst-addr and MAC addresses. [Ref] Applicable standard specifications: RFC6830.

# Copyright (c) 2021 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

*** Settings ***
| Resource | resources/libraries/robot/shared/default.robot
|
| Variables | resources/test_data/lisp/lisp.py
|
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
| ... | NIC_Intel-X710 | IP4FWD | LISP | LISPGPE_IP6o4 | DRV_VFIO_PCI
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip4lispgpe-ip6base
|
| Suite Setup | Setup suite topology interfaces | scapy
| Test Setup | Setup test
| Test Teardown | Tear down test | packet_trace | telemetry
|
| Test Template | Local Template
|
|

*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | lisp_plugin.so
| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
| ${nic_rxq_size}= | 0
| ${nic_txq_size}= | 0
| ${nic_pfs}= | 2
| ${nic_vfs}= | 0
| ${overhead}= | ${54}
| ${ot_mode}= | 6to4
| ${is_gpe}= | ${1}
# Telemetry
| ${telemetry_profile}= | vpp_test_teardown

6.6.1.3.1. Local Template¶

[Cfg] On DUT1 configure LISPGPEArguments: - frame_size - Framesize in Bytes in integer. Type: integer - phy_cores - Number of physical cores. Type: integer - rxq - Number of RX queues, default value: ${None}. Type: integer


Set Test Variable  \${frame_size}
Given Set Max Rate And Jumbo
  And Add worker threads to all DUTs  ${phy_cores}  ${rxq}
  And Pre-initialize layer driver  ${nic_driver}
  And Apply startup configuration on all VPP DUTs  with_trace=${True}
 When Initialize layer driver  ${nic_driver}
  And Initialize layer interface
  And Configure topology for IPv6 LISPoIP4 testing
  And Vpp Interfaces RA Suppress On All Nodes  ${nodes}
  And Configure LISP in 2-node circular topology  ${dut1}  ${DUT1_${int}2}[0]  ${NONE}  ${duts_locator_set}  ${dut1_ip6o4_eid}  ${dut1_ip6o4_static_adjacency}  ${is_gpe}
 Then Send packet and verify LISPoTunnel encap  ${tg}  ${tg_if1_ip6}  ${dst_ip6}  ${TG_pf1}[0]  ${TG_pf1_mac}[0]  ${DUT1_vf1_mac}[0]  ${TG_pf2}[0]  ${DUT1_vf2_mac}[0]  ${TG_pf2_mac}[0]  ${src_rloc4}  ${dst_rloc4}  ${ot_mode}

6.6.1.3.2. 64B-0c-ethip4lispgpe-ip6base-scapy¶


frame_size=${64}  phy_cores=${0}