ip6 tunnels¶
lisp¶
eth2p-ethip6lispgpe-ip4base-dev¶
ip6-lispgpe-ip4 encapsulation test cases
[Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv6-LISPGPE-IPv4-ICMPv4 on DUT1-TG, Eth-IPv4-ICMPv4 on TG-DUTn for IPv6 routing over LISPoIPv6 tunnel.
[Cfg] DUT configuration: DUT1 and TG(if2) are configured with IPv6 routing and static routes. LISPoIPv6 tunnel is configured between DUT1 and TG.
[Ver] TG verification: Test ICMPv4 Echo Request packets are sent in TG->DUT(if1); On receive TG(if2) verifies packets for correctness and their IPv4 src-addr, dst-addr and MAC addresses.
[Ref] Applicable standard specifications: RFC6830.
|
|
|---|---|
|
PASS |
eth2p-ethip6lispgpe-ip6base-dev¶
ip6-lispgpe-ip6 encapsulation test cases
[Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv6-LISPGPE-IPv6-ICMPv6 on DUT1-TG, Eth-IPv6-ICMPv6 on TG-DUTn for IPv6 routing over LISPoIPv6 tunnel.
[Cfg] DUT configuration: DUT1 and TG(if2) are configured with IPv6 routing and static routes. LISPoIPv6 tunnel is configured between DUT1 and TG.
[Ver] TG verification: Test ICMPv6 Echo Request packets are sent in TG->DUT(if1); On receive TG(if2) verifies packets for correctness and their IPv6 src-addr, dst-addr and MAC addresses.
[Ref] Applicable standard specifications: RFC6830.
|
|
|---|---|
|
PASS |