Dispatch-trace cli reference

pcap dispatch trace

pcap dispatch trace [on|off] [max <nn>] [file <name>] [status]
              [buffer-trace <input-node-name> <nn>][post-mortem]

This command is used to start or stop pcap dispatch trace capture, or show the capture status.

This command has the following optional parameters:

  • on|off - Used to start or stop capture.

  • max <nn> - Depth of local buffer. Once nn number

    of packets have been received, buffer is flushed to file. Once another nn number of packets have been received, buffer is flushed to file, overwriting previous write. If not entered, value defaults to 100. Can only be updated if packet capture is off.

  • file <name> - Used to specify the output filename. The file will

    be placed in the /tmp directory, so only the filename is supported. Directory should not be entered. If file already exists, file will be overwritten. If no filename is provided, /tmp/vpe.pcap will be used. Can only be updated if packet capture is off.

  • status - Displays the current status and configured attributes

    associated with a packet capture. If packet capture is in progress, status also will return the number of packets currently in the local buffer. All additional attributes entered on command line with status will be ignored and not applied.

Example of how to display the status of capture when off:

pcap dispatch trace status

max is 100, for any interface to file /tmp/vpe.pcap
pcap dispatch capture is off...

Example of how to start a dispatch trace capture:

pcap dispatch trace on max 35 file dispatchTrace.pcap

pcap dispatch capture on...

Example of how to start a dispatch trace capture with buffer tracing

pcap dispatch trace on max 10000 file dispatchTrace.pcap   buffer-trace dpdk-input 1000

pcap dispatch capture on...

Example of how to display the status of a tx packet capture in progress:

pcap trace tx status

max is 35, dispatch trace to file /tmp/vppTest.pcap
pcap tx capture is on: 20 of 35 pkts...

Example of how to stop a tx packet capture:

vppctl pcap dispatch trace off

captured 21 pkts...
saved to /tmp/dispatchTrace.pcap...
Example of how to start a post-mortem dispatch trace:
pcap dispatch trace on max 20000 buffer-trace
    dpdk-input 3000000000 post-mortem

Declaration: pcap_dispatch_trace_command src/plugins/dispatch-trace/main.c line 497

Implementation: dispatch_trace_command_fn