Reply for map_param_get request.
- Template Parameters
-
| context | - sender context, to match reply w/ request |
| retval | - return code for request |
| inner | - 1=frag inner packet, 0=frag tunnel packets, ~0=untouched |
| ignore_df | - 1=IP4 fragm despite DF bit, 0=honor DF, ~0=untouched |
| icmp_ip4_err_relay_src | - IPv4 ICMP err relay src address |
| icmp6_enable_unreachable | - 1 = send ICMP unreachable err msgs |
| ip4_nh_address | - direct IP4 next-hop address |
| ip6_nh_address | - direct IP6 next-hop address |
| ip4_lifetime_ms | - reassembly valid lifetime, or ~0 |
| ip4_pool_size | - max number of reassemblies, or ~0 |
| ip4_buffers | - max number of reassembly buffers, or ~0 |
| ip4_ht_ratio | - reassembly valid lifetime, or ~0 |
| ip6_lifetime_ms | - max number of reassemblies, or ~0 |
| ip6_pool_size | - max number of reassemblies, or ~0 |
| ip6_buffers | - max number of reassembly buffers, or ~0 |
| ip6_ht_ratio | - hash-table size factor, or ~0 |
| sec_check_enable | - 1=enable security check on first inbound packet |
| sec_check_fragments | - 1=enable check on (subsequent) fragments too |
| tc_copy | - 1 = copy packet class/TOS field, 0 = use class instead |
| tc_class | - class field value when copy == 0 |
Definition at line 326 of file map.api.
1.8.11 
