3n-icx-xxv710¶
25ge2p1xxv710-avf-ethip4gtpusw-ip4base-mrr¶
RFC2544: Pkt throughput GTPU test cases
[Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv4-GTPU on DUT1-DUT2, Eth-IPv4 on TG-DUTn for IPv4 routing over GTPU tunnel.
[Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4. routing and static routes. GTPU tunnel is configured between DUT1 and DUT2. DUT1 and DUT2 are tested with Intel-XXV710.
[Ver] TG vefication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
[Ref] Applicable standard specifications: RFC2544.
|
|
---|---|
|
|
|
|
25ge2p1xxv710-avf-ethip4vxlan-l2bdbasemaclrn-mrr¶
RFC2544: Pkt throughput L2BD with VXLANoIPv4 test cases
[Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4 on TG-DUTn. Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUTs.
[Cfg] DUT configuration: DUT1 and DUT2 are configured with L2
bridge- domain. VXLAN tunnels are configured between L2BDs on DUT1 and DUT2. DUT1 and DUT2 are tested with Intel-XXV710.
[Ver] TG vefication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
[Ref] Applicable standard specifications: RFC2544, RFC7348.
|
|
---|---|
|
|
|
|
|
|
25ge2p1xxv710-avf-ethip4vxlan-l2xcbase-mrr¶
RFC2544: Pkt throughput L2XC with VXLANoIPv4 test cases
[Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv4 for L2 cross-connect on TG-DUTn. Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUT1 and DUT2.
[Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 cross- connect. VXLAN tunnels are configured between L2XCs on DUT1 and DUT2. DUT1 and DUT2 are tested with Intel-XXV710.
[Ver] TG vefication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per
flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
[Ref] Applicable standard specifications: RFC2544, RFC7348.
|
|
---|---|
|
|
|
|
|
|
25ge2p1xxv710-ethip4gtpusw-ip4base-mrr¶
RFC2544: Pkt throughput GTPU test cases
[Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv4-GTPU on DUT1-DUT2, Eth-IPv4 on TG-DUTn for IPv4 routing over GTPU tunnel.
[Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4. routing and static routes. GTPU tunnel is configured between DUT1 and DUT2. DUT1 and DUT2 are tested with Intel-XXV710.
[Ver] TG vefication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
[Ref] Applicable standard specifications: RFC2544.
|
|
---|---|
|
|
|
|
|
|
25ge2p1xxv710-ethip4vxlan-l2bdbasemaclrn-mrr¶
RFC2544: Pkt throughput L2BD with VXLANoIPv4 test cases
[Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4 on TG-DUTn. Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUTs.
[Cfg] DUT configuration: DUT1 and DUT2 are configured with L2
bridge- domain. VXLAN tunnels are configured between L2BDs on DUT1 and DUT2. DUT1 and DUT2 are tested with Intel-XXV710.
[Ver] TG vefication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
[Ref] Applicable standard specifications: RFC2544, RFC7348.
|
|
---|---|
|
|
|
|
|
|
25ge2p1xxv710-ethip4vxlan-l2xcbase-mrr¶
RFC2544: Pkt throughput L2XC with VXLANoIPv4 test cases
[Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv4 for L2 cross-connect on TG-DUTn. Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUT1 and DUT2.
[Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 cross- connect. VXLAN tunnels are configured between L2XCs on DUT1 and DUT2. DUT1 and DUT2 are tested with Intel-XXV710.
[Ver] TG vefication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per
flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
[Ref] Applicable standard specifications: RFC2544, RFC7348.
|
|
---|---|
|
|
|
|
|
|