Packet LatencyΒΆ

VPP latency results are generated based on the test data obtained from CSIT-2206 NDR-PDR throughput tests executed across physical testbeds hosted in LF FD.io labs: 2n-icx, 3n-icx, 2n-aws, 2n-skx, 3n-skx, 2n-clx, 2n-zn2, 3n-alt, 3n-tsh, 2n-tx2.

Latency by percentile distribution plots are used to show packet latency percentiles at different packet rate load levels: i) No-Load latency streams only, ii) Low-Load at 10% PDR, iii) Mid-Load at 50% PDR and iv) High-Load at 90% PDR.

For more details, see Packet Latency.

Additional information about graph data:

  1. Graph Title: describes tested DUT packet path.

  2. X-axis Labels: percentile of packets.

  3. Y-axis Labels: measured one-way packet latency values in [uSec].

  4. Graph Legend: list of latency tests at different packet rate load level.

  5. Hover Information: packet rate load level, stream direction (East-West, West-East), percentile, one-way latency.

Note

Test results are stored in build logs from FD.io vpp performance job 2n-icx, build logs from FD.io vpp performance job 3n-icx, build logs from FD.io vpp performance job 2n-aws, build logs from FD.io vpp performance job 2n-skx, build logs from FD.io vpp performance job 3n-skx, build logs from FD.io vpp performance job 2n-clx, build logs from FD.io vpp performance job 2n-zn2, build logs from FD.io vpp performance job 3n-alt, build logs from FD.io vpp performance job 3n-tsh and build logs from FD.io vpp performance job 2n-tx2 with RF result files csit-vpp-perf-2206-*.zip archived here.