3n-skx-xxv710

25ge2p1xxv710-avf-ethip6lispip4-ip6base-ndrpdr

RFC6830: Pkt throughput Lisp test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv6-LISP-IPv4 on DUT1-DUT2, Eth-IPv6 on TG-DUTn for IPv6 routing over LISPoIPv4 tunnel.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and static routes. LISPoIPv4 tunnel is configured between DUT1 and DUT2. DUT1 and DUT2 tested with Intel-XXV710.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library.

  • [Ref] Applicable standard specifications: RFC6830.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 1518b-2t1c-avf- 
 ethip6lispip4-ip6base-ndrpdr 

 1.  2.95      37.38 
 2.  3.86      49.00 
  
 3.   50  170  268       105  202  281  
 4.   57   77   86        73  112  135  
 5.   77   91  103        73   91  102  

 1518b-4t2c-avf- 
 ethip6lispip4-ip6base-ndrpdr 

 1.  2.90      36.82 
 2.  3.86      49.00 
  
 3.   67  162  250        66  173  243  
 4.   49   80  102        44   68   98  
 5.   61   73   84        59   72   83  

 imix-2t1c-avf- 
 ethip6lispip4-ip6base-ndrpdr 

 1.  5.19      17.52 
 2.  6.00      20.26 

 imix-4t2c-avf- 
 ethip6lispip4-ip6base-ndrpdr 

 1.  5.64      19.04 
 2.  6.72      22.69 

 imix-8t4c-avf- 
 ethip6lispip4-ip6base-ndrpdr 

 1.  5.78      19.51 
 2.  7.17      24.21

25ge2p1xxv710-avf-ethip6lispip6-ip6base-ndrpdr

RFC6830: Pkt throughput Lisp test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv6-LISP-IPv6 on DUT1-DUT2, Eth-IPv6 on TG-DUTn for IPv6 routing over LISPoIPv6 tunnel.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and static routes. LISPoIPv6 tunnel is configured between DUT1 and DUT2. DUT1 and DUT2 tested with Intel-XXV710.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library.

  • [Ref] Applicable standard specifications: RFC6830.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 1518b-2t1c-avf- 
 ethip6lispip6-ip6base-ndrpdr 

 1.  3.12      38.60 
 2.  3.14      38.79 
  
 3.   89  176  265        71  181  271  
 4.   79  141  165        75  136  148  
 5.  152  198  219       149  194  219  

 1518b-4t2c-avf- 
 ethip6lispip6-ip6base-ndrpdr 

 1.  3.50      43.33 
 2.  3.50      43.33 
  
 3.   78  146  223        73  128  184  
 4.   51   73   93        51   73   89  
 5.  196  245  268       209  260  288  

 imix-2t1c-avf- 
 ethip6lispip6-ip6base-ndrpdr 

 1.  4.01      12.25 
 2.  4.07      12.44 

 imix-4t2c-avf- 
 ethip6lispip6-ip6base-ndrpdr 

 1.  4.54      13.86 
 2.  4.58      14.00 

 imix-8t4c-avf- 
 ethip6lispip6-ip6base-ndrpdr 

 1.  4.82      14.73 
 2.  4.87      14.87

25ge2p1xxv710-ethip6lispip4-ip6base-ndrpdr

RFC6830: Pkt throughput Lisp test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv6-LISP-IPv4 on DUT1-DUT2, Eth-IPv6 on TG-DUTn for IPv6 routing over LISPoIPv4 tunnel.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and static routes. LISPoIPv4 tunnel is configured between DUT1 and DUT2. DUT1 and DUT2 tested with Intel-XXV710.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library.

  • [Ref] Applicable standard specifications: RFC6830.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 1518b-2t1c- 
 ethip6lispip4-ip6base-ndrpdr 

 1.  3.86      49.00 
 2.  3.86      49.00 
  
 3.   22   41   68        22   44   66  
 4.   44   58   68        52   79   92  
 5.   82  101  116        83  103  117  

 1518b-4t2c- 
 ethip6lispip4-ip6base-ndrpdr 

 1.  3.86      49.00 
 2.  3.86      49.00 
  
 3.   22   39   55        22   48   75  
 4.   49   68   81        48   68   82  
 5.   71   89  105        70   85   98  

 imix-2t1c- 
 ethip6lispip4-ip6base-ndrpdr 

 1.  4.75      16.03 
 2.  4.77      16.11 

 imix-4t2c- 
 ethip6lispip4-ip6base-ndrpdr 

 1.  5.39      18.19 
 2.  5.44      18.37 

 imix-8t4c- 
 ethip6lispip4-ip6base-ndrpdr 

 1.  5.79      19.53 
 2.  5.85      19.73

25ge2p1xxv710-ethip6lispip6-ip6base-ndrpdr

RFC6830: Pkt throughput Lisp test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv6-LISP-IPv6 on DUT1-DUT2, Eth-IPv6 on TG-DUTn for IPv6 routing over LISPoIPv6 tunnel.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and static routes. LISPoIPv6 tunnel is configured between DUT1 and DUT2. DUT1 and DUT2 tested with Intel-XXV710.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library.

  • [Ref] Applicable standard specifications: RFC6830.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 1518b-2t1c- 
 ethip6lispip6-ip6base-ndrpdr 

 1.  2.63      32.56 
 2.  2.63      32.56 
  
 3.   22   58   76        22   58   79  
 4.   52   83  103        51   89  112  
 5.  131  171  183       114  154  172  

 1518b-4t2c- 
 ethip6lispip6-ip6base-ndrpdr 

 1.  2.91      35.96 
 2.  2.91      35.96 
  
 3.   22   54   85        22   50   75  
 4.   50  101  119        56   91  106  
 5.  116  154  176       112  150  171  

 imix-2t1c- 
 ethip6lispip6-ip6base-ndrpdr 

 1.  3.37      10.30 
 2.  3.39      10.36 

 imix-4t2c- 
 ethip6lispip6-ip6base-ndrpdr 

 1.  3.86      11.79 
 2.  3.86      11.79 

 imix-8t4c- 
 ethip6lispip6-ip6base-ndrpdr 

 1.  4.15      12.68 
 2.  4.15      12.68