3n-icx-xxv710

25ge2p1xxv710-avf-ethip6lispip4-ip6base-ndrpdr

RFC6830: Pkt throughput Lisp test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv6-LISP-IPv4 on DUT1-DUT2, Eth-IPv6 on TG-DUTn for IPv6 routing over LISPoIPv4 tunnel.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and static routes. LISPoIPv4 tunnel is configured between DUT1 and DUT2. DUT1 and DUT2 tested with Intel-XXV710.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library.

  • [Ref] Applicable standard specifications: RFC6830.

 Test Name 

 Throughput: 
1. Mpps Gbps (NDR)
2. Mpps Gbps (PDR)

One-Way Latency Percentiles in uSec at %PDR load,
one set per each direction:
3. P50 P90 P99 P50 P90 P99 (10% PDR)
4. P50 P90 P99 P50 P90 P99 (50% PDR)
5. P50 P90 P99 P50 P90 P99 (90% PDR)

 1518b-2t1c-avf- 
ethip6lispip4-ip6base-ndrpdr

 1.  3.86      49.00 
2. 3.86 49.00

3. 59 140 199 76 151 237
4. 47 89 113 64 117 135
5. 55 68 81 61 72 80

 1518b-4t2c-avf- 
ethip6lispip4-ip6base-ndrpdr

 1.  3.86      49.00 
2. 3.86 49.00

3. 43 124 143 55 131 209
4. 38 61 80 41 62 74
5. 49 69 78 53 65 75

 imix-2t1c-avf- 
ethip6lispip4-ip6base-ndrpdr

 1.  8.69      29.32 
2. 8.73 29.46

 imix-4t2c-avf- 
ethip6lispip4-ip6base-ndrpdr

 1.  9.71      32.76 
2. 9.80 33.09

 imix-8t4c-avf- 
ethip6lispip4-ip6base-ndrpdr

 1.  8.54      28.82 
2. 8.85 29.85

25ge2p1xxv710-avf-ethip6lispip6-ip6base-ndrpdr

RFC6830: Pkt throughput Lisp test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv6-LISP-IPv6 on DUT1-DUT2, Eth-IPv6 on TG-DUTn for IPv6 routing over LISPoIPv6 tunnel.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and static routes. LISPoIPv6 tunnel is configured between DUT1 and DUT2. DUT1 and DUT2 tested with Intel-XXV710.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library.

  • [Ref] Applicable standard specifications: RFC6830.

 Test Name 

 Throughput: 
1. Mpps Gbps (NDR)
2. Mpps Gbps (PDR)

One-Way Latency Percentiles in uSec at %PDR load,
one set per each direction:
3. P50 P90 P99 P50 P90 P99 (10% PDR)
4. P50 P90 P99 P50 P90 P99 (50% PDR)
5. P50 P90 P99 P50 P90 P99 (90% PDR)

 1518b-2t1c-avf- 
ethip6lispip6-ip6base-ndrpdr

 1.  3.91      48.37 
2. 3.91 48.37

3. 72 158 240 86 167 238
4. 49 78 102 67 122 137
5. 87 109 117 89 111 120

 1518b-4t2c-avf- 
ethip6lispip6-ip6base-ndrpdr

 1.  3.90      48.25 
2. 3.92 48.50

3. 50 134 210 73 153 234
4. 50 89 115 59 93 133
5. 78 99 111 77 97 106

 imix-2t1c-avf- 
ethip6lispip6-ip6base-ndrpdr

 1.  5.94      18.14 
2. 6.00 18.32

 imix-4t2c-avf- 
ethip6lispip6-ip6base-ndrpdr

 1.  6.70      20.47 
2. 6.74 20.58

 imix-8t4c-avf- 
ethip6lispip6-ip6base-ndrpdr

 1.  7.07      21.58 
2. 7.14 21.80

25ge2p1xxv710-ethip6lispip4-ip6base-ndrpdr

RFC6830: Pkt throughput Lisp test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv6-LISP-IPv4 on DUT1-DUT2, Eth-IPv6 on TG-DUTn for IPv6 routing over LISPoIPv4 tunnel.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and static routes. LISPoIPv4 tunnel is configured between DUT1 and DUT2. DUT1 and DUT2 tested with Intel-XXV710.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library.

  • [Ref] Applicable standard specifications: RFC6830.

 Test Name 

 Throughput: 
1. Mpps Gbps (NDR)
2. Mpps Gbps (PDR)

One-Way Latency Percentiles in uSec at %PDR load,
one set per each direction:
3. P50 P90 P99 P50 P90 P99 (10% PDR)
4. P50 P90 P99 P50 P90 P99 (50% PDR)
5. P50 P90 P99 P50 P90 P99 (90% PDR)

 1518b-2t1c- 
ethip6lispip4-ip6base-ndrpdr

 1.  3.86      49.00 
2. 3.86 49.00

3. 20 37 69 20 40 77
4. 44 63 89 52 82 115
5. 65 78 92 64 85 95

 1518b-4t2c- 
ethip6lispip4-ip6base-ndrpdr

 1.  3.86      49.00 
2. 3.86 49.00

3. 20 50 72 20 38 70
4. 36 53 75 49 72 98
5. 51 67 78 72 86 94

 imix-2t1c- 
ethip6lispip4-ip6base-ndrpdr

 1.  7.04      23.76 
2. 7.08 23.88

 imix-4t2c- 
ethip6lispip4-ip6base-ndrpdr

 1.  8.10      27.34 
2. 8.18 27.62

 imix-8t4c- 
ethip6lispip4-ip6base-ndrpdr

 1.  8.65      29.20 
2. 8.74 29.50

25ge2p1xxv710-ethip6lispip6-ip6base-ndrpdr

RFC6830: Pkt throughput Lisp test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv6-LISP-IPv6 on DUT1-DUT2, Eth-IPv6 on TG-DUTn for IPv6 routing over LISPoIPv6 tunnel.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and static routes. LISPoIPv6 tunnel is configured between DUT1 and DUT2. DUT1 and DUT2 tested with Intel-XXV710.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library.

  • [Ref] Applicable standard specifications: RFC6830.

 Test Name 

 Throughput: 
1. Mpps Gbps (NDR)
2. Mpps Gbps (PDR)

One-Way Latency Percentiles in uSec at %PDR load,
one set per each direction:
3. P50 P90 P99 P50 P90 P99 (10% PDR)
4. P50 P90 P99 P50 P90 P99 (50% PDR)
5. P50 P90 P99 P50 P90 P99 (90% PDR)

 1518b-2t1c- 
ethip6lispip6-ip6base-ndrpdr

 1.  3.90      48.26 
2. 3.92 48.45

3. 21 34 43 22 52 67
4. 50 77 95 43 69 94
5. 106 139 148 112 140 156

 1518b-4t2c- 
ethip6lispip6-ip6base-ndrpdr

 1.  3.91      48.35 
2. 3.91 48.35

3. 21 45 66 23 54 69
4. 43 56 69 41 56 66
5. 81 99 113 65 84 97

 imix-2t1c- 
ethip6lispip6-ip6base-ndrpdr

 1.  5.11      15.61 
2. 5.14 15.69

 imix-4t2c- 
ethip6lispip6-ip6base-ndrpdr

 1.  5.85      17.88 
2. 5.88 17.97

 imix-8t4c- 
ethip6lispip6-ip6base-ndrpdr

 1.  6.22      19.00 
2. 6.28 19.19