vm vhost

ethip4

2n1l-10ge2p1x710-ethip4-ip4base-eth-2vhost-1vm-scapy

2n1l-10ge2p1x710-ethip4-ip4base-eth-2vhost-1vm-scapy

IPv4 routing test cases with vhost user interface [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with VM and single links between nodes. [Enc] Packet Encapsulations: Eth-IPv4 for IPv4 routing on both links. [Cfg] DUT configuration: DUT1 is configured with IPv4 routing and two static IPv4 /24 route entries. Qemu Guest is connected to VPP via vhost-user interfaces. Guest is running VPP ip4 interconnecting vhost-user interfaces. [Ver] TG verification: Test IPv4 packet with IP protocol=61 is sent in one direction by TG on links to DUT1; on receive TG verifies packet for correctness and their IPv4 src-addr, dst-addr and MAC addresses. [Ref] Applicable standard specifications: RFC791, RFC826, RFC792

 Test Name 

 Status 

 64b-0c-ethip4-ip4base- 
eth-2vhost-1vm-scapy

PASS

2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-eth-2vhost-1vm-scapy

2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-eth-2vhost-1vm-scapy

L2 bridge-domain test cases with vhost user interface [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with VM and single links between nodes. [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4. [Cfg] DUT configuration: DUT1 is configured with two L2 bridge-domains (L2BD) switching combined with MAC learning enabled. Qemu Guest is connected to VPP via vhost-user interfaces. Guest is configured with VPP l2 cross-connect interconnecting vhost-user interfaces. [Ver] TG verification: Test IPv4 packets with IP protocol=61 are sent in both directions by TG on links to DUT1 via VM; on receive TG verifies packets for correctness and their IPv4 src-addr, dst-addr and MAC addresses. [Ref] Applicable standard specifications: RFC792

 Test Name 

 Status 

 64b-0c-ethip4-l2bdbasemaclrn- 
eth-2vhost-1vm-scapy

PASS

2n1l-10ge2p1x710-ethip4-l2xcbase-eth-2vhost-1vm-scapy

2n1l-10ge2p1x710-ethip4-l2xcbase-eth-2vhost-1vm-scapy

L2 cross-connect test cases with vhost user interface [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with VM and single links between nodes. [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4. [Cfg] DUT configuration: DUT1 is configured with L2 cross-connect (L2XC) switching. Qemu Guest is connected to VPP via vhost-user interfaces. Guest is configured with VPP l2 cross-connect interconnecting vhost-user interfaces. [Ver] TG verification: Test IPv4 packets with IP protocol=61 are sent in both directions by TG on links to DUT1 via VM; on receive TG verifies packets for correctness and their IPv4 src-addr, dst-addr and MAC addresses. [Ref] Applicable standard specifications: RFC792

 Test Name 

 Status 

 64b-0c-ethip4-l2xcbase- 
eth-2vhost-1vm-scapy

PASS

ethip6

2n1l-10ge2p1x710-ethip6-ip6base-eth-2vhost-1vm-scapy

2n1l-10ge2p1x710-ethip6-ip6base-eth-2vhost-1vm-scapy

IPv4 routing test cases with vhost user interface [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with VM and single links between nodes. [Enc] Packet Encapsulations: Eth-IPv6 for IPv6 routing on both links. [Cfg] DUT configuration: DUT1 is configured with IPv6 routing and two static IPv6 /64 route entries. Qemu Guest is connected to VPP via vhost-user interfaces. Guest is running VPP ip6 interconnecting vhost-user interfaces. [Ver] TG verification: Test IPv6 packets are sent in one direction by TG on links to DUT1; on receive TG verifies packets for correctness and their IPv6 src-addr, dst-addr and MAC addresses. [Ref] Applicable standard specifications: RFC2460, RFC4443, RFC4861

 Test Name 

 Status 

 78b-0c-ethip6-ip6base- 
eth-2vhost-1vm-scapy

PASS