.. |br| raw:: html

    <br />


.. |prein| raw:: html

    <pre>


.. |preout| raw:: html

    </pre>


vm vhost
````````

ethip4
''''''

2n1l-10ge2p1x710-ethip4-ip4base-eth-2vhost-1vm-scapy
....................................................

2n1l-10ge2p1x710-ethip4-ip4base-eth-2vhost-1vm-scapy
....................................................

*IPv4 routing test cases with vhost user interface*
*[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with  VM and single links between nodes.
*[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing on both links.
*[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and  two static IPv4 /24 route entries. Qemu Guest is connected to VPP via  vhost-user interfaces. Guest is running VPP ip4 interconnecting  vhost-user interfaces.
*[Ver] TG verification:* Test IPv4 packet with IP protocol=61 is sent  in one direction by TG on links to DUT1; on receive TG verifies packet  for correctness and their IPv4 src-addr, dst-addr and MAC addresses.
*[Ref] Applicable standard specifications:* RFC791, RFC826, RFC792

.. only:: html

    .. csv-table::
        :header-rows: 1
        :widths: auto
        :align: center
        :file: vpp_device_results_ubuntu_2n1l-10ge2p1x710-ethip4-ip4base-eth-2vhost-1vm-scapy.csv

.. only:: latex


  .. raw:: latex

      \csvautolongtable{_tmp/src/detailed_test_results/vpp_device_results_ubuntu/vpp_device_results_ubuntu_2n1l-10ge2p1x710-ethip4-ip4base-eth-2vhost-1vm-scapy.csv}


2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-eth-2vhost-1vm-scapy
...........................................................

2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-eth-2vhost-1vm-scapy
...........................................................

*L2 bridge-domain test cases with vhost user interface*
*[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with  VM and single links between nodes.
*[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
*[Cfg] DUT configuration:* DUT1 is configured with two L2  bridge-domains (L2BD) switching combined with MAC learning enabled.  Qemu Guest is connected to VPP via vhost-user interfaces. Guest is  configured with VPP l2 cross-connect interconnecting vhost-user  interfaces.
*[Ver] TG verification:* Test IPv4 packets with IP protocol=61 are  sent in both directions by TG on links to DUT1 via VM; on receive TG  verifies packets for correctness and their IPv4 src-addr, dst-addr  and MAC addresses.
*[Ref] Applicable standard specifications:* RFC792

.. only:: html

    .. csv-table::
        :header-rows: 1
        :widths: auto
        :align: center
        :file: vpp_device_results_ubuntu_2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-eth-2vhost-1vm-scapy.csv

.. only:: latex


  .. raw:: latex

      \csvautolongtable{_tmp/src/detailed_test_results/vpp_device_results_ubuntu/vpp_device_results_ubuntu_2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-eth-2vhost-1vm-scapy.csv}


2n1l-10ge2p1x710-ethip4-l2xcbase-eth-2vhost-1vm-scapy
.....................................................

2n1l-10ge2p1x710-ethip4-l2xcbase-eth-2vhost-1vm-scapy
.....................................................

*L2 cross-connect test cases with vhost user interface*
*[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with  VM and single links between nodes.
*[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
*[Cfg] DUT configuration:* DUT1 is configured with L2 cross-connect  (L2XC) switching. Qemu Guest is connected to VPP via vhost-user  interfaces. Guest is configured with VPP l2 cross-connect  interconnecting vhost-user interfaces.
*[Ver] TG verification:* Test IPv4 packets with IP protocol=61 are  sent in both directions by TG on links to DUT1 via VM; on receive TG  verifies packets for correctness and their IPv4 src-addr, dst-addr  and MAC addresses.
*[Ref] Applicable standard specifications:* RFC792

.. only:: html

    .. csv-table::
        :header-rows: 1
        :widths: auto
        :align: center
        :file: vpp_device_results_ubuntu_2n1l-10ge2p1x710-ethip4-l2xcbase-eth-2vhost-1vm-scapy.csv

.. only:: latex


  .. raw:: latex

      \csvautolongtable{_tmp/src/detailed_test_results/vpp_device_results_ubuntu/vpp_device_results_ubuntu_2n1l-10ge2p1x710-ethip4-l2xcbase-eth-2vhost-1vm-scapy.csv}


ethip6
''''''

2n1l-10ge2p1x710-ethip6-ip6base-eth-2vhost-1vm-scapy
....................................................

2n1l-10ge2p1x710-ethip6-ip6base-eth-2vhost-1vm-scapy
....................................................

*IPv4 routing test cases with vhost user interface*
*[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with  VM and single links between nodes.
*[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing on both links.
*[Cfg] DUT configuration:* DUT1 is configured with IPv6 routing and  two static IPv6 /64 route entries. Qemu Guest is connected to VPP via  vhost-user interfaces. Guest is running VPP ip6 interconnecting  vhost-user interfaces.
*[Ver] TG verification:* Test IPv6 packets are sent in one direction  by TG on links to DUT1; on receive TG verifies packets for correctness  and their IPv6 src-addr, dst-addr and MAC addresses.
*[Ref] Applicable standard specifications:* RFC2460, RFC4443, RFC4861

.. only:: html

    .. csv-table::
        :header-rows: 1
        :widths: auto
        :align: center
        :file: vpp_device_results_ubuntu_2n1l-10ge2p1x710-ethip6-ip6base-eth-2vhost-1vm-scapy.csv

.. only:: latex


  .. raw:: latex

      \csvautolongtable{_tmp/src/detailed_test_results/vpp_device_results_ubuntu/vpp_device_results_ubuntu_2n1l-10ge2p1x710-ethip6-ip6base-eth-2vhost-1vm-scapy.csv}