3n-tsh-x520

10ge2p1x520-ethip6-ip6base-ndrpdr

RFC2544: Pkt throughput IPv6 routing test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv6 for IPv6 routing.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and two static IPv6 /64 route entries. DUT1 and DUT2 tested with Intel-X520-DA2.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv6 header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
1. Mpps Gbps (NDR)
2. Mpps Gbps (PDR)

One-Way Latency Percentiles in uSec at %PDR load,
one set per each direction:
3. P50 P90 P99 P50 P90 P99 (10% PDR)
4. P50 P90 P99 P50 P90 P99 (50% PDR)
5. P50 P90 P99 P50 P90 P99 (90% PDR)

 78b-1t1c-ethip6-ip6base-ndrpdr 

 1.  4.89       3.83 
2. 4.91 3.85

3. 21 26 30 21 26 40
4. 72 88 107 45 64 72
5. 104 123 136 106 128 149

 78b-2t2c-ethip6-ip6base-ndrpdr 

 1.  6.27       4.92 
2. 6.34 4.97

3. 22 34 42 21 32 44
4. 37 61 73 37 57 70
5. 78 97 112 82 102 117

 78b-4t4c-ethip6-ip6base-ndrpdr 

 1.  5.95       4.67 
2. 6.23 4.88

3. 21 27 34 21 26 30
4. 34 55 63 33 44 52
5. 62 78 94 58 71 85

10ge2p1x520-ethip6-ip6scale200k-ndrpdr

RFC2544: Pkt throughput IPv6 routing test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv6 for IPv6 routing.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and 2x100k static IPv6 /64 route entries. DUT1 and DUT2 tested with Intel-X520-DA2.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 100k flows per flow-group) with all packets containing Ethernet header, IPv6 header with IP and static payload. MAC addresses are matching MAC addresses of the TG node interfaces. Incrementing of IP.dst (IPv6 destination address) field is applied to both streams.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
1. Mpps Gbps (NDR)
2. Mpps Gbps (PDR)

One-Way Latency Percentiles in uSec at %PDR load,
one set per each direction:
3. P50 P90 P99 P50 P90 P99 (10% PDR)
4. P50 P90 P99 P50 P90 P99 (50% PDR)
5. P50 P90 P99 P50 P90 P99 (90% PDR)

 78b-1t1c- 
ethip6-ip6scale200k-ndrpdr

 1.  2.32       1.82 
2. 2.50 1.96

3. 21 46 60 22 59 76
4. 51 101 130 57 119 142
5. 134 175 220 156 214 241

 78b-2t2c- 
ethip6-ip6scale200k-ndrpdr

 1.  3.49       2.73 
2. 3.54 2.77

3. 23 35 47 23 33 42
4. 50 82 101 47 83 103
5. 101 125 156 104 136 163

 78b-4t4c- 
ethip6-ip6scale200k-ndrpdr

 1.  4.25       3.33 
2. 4.25 3.33

3. 22 26 36 22 28 37
4. 37 79 93 42 57 68
5. 74 97 119 75 100 122

10ge2p1x520-ethip6-ip6scale20k-ndrpdr

RFC2544: Pkt throughput IPv6 routing test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv6 for IPv6 routing.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and 2x10k static IPv6 /64 route entries. DUT1 and DUT2 tested with Intel-X520-DA2.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 10k flows per flow-group) with all packets containing Ethernet header, IPv6 header with IP and static payload. MAC addresses are matching MAC addresses of the TG node interfaces. Incrementing of IP.dst (IPv6 destination address) field is applied to both streams.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
1. Mpps Gbps (NDR)
2. Mpps Gbps (PDR)

One-Way Latency Percentiles in uSec at %PDR load,
one set per each direction:
3. P50 P90 P99 P50 P90 P99 (10% PDR)
4. P50 P90 P99 P50 P90 P99 (50% PDR)
5. P50 P90 P99 P50 P90 P99 (90% PDR)

 78b-1t1c- 
ethip6-ip6scale20k-ndrpdr

 1.  3.65       2.86 
2. 3.68 2.89

3. 22 36 55 22 35 44
4. 44 81 95 44 76 88
5. 106 134 156 111 137 163

 78b-2t2c- 
ethip6-ip6scale20k-ndrpdr

 1.  4.34       3.40 
2. 4.40 3.45

3. 21 45 58 22 29 44
4. 25 43 56 25 52 84
5. 74 92 117 72 91 109

 78b-4t4c- 
ethip6-ip6scale20k-ndrpdr

 1.  4.58       3.59 
2. 4.62 3.63

3. 22 33 39 22 32 36
4. 41 47 52 35 49 57
5. 67 86 98 65 78 90

10ge2p1x520-ethip6-ip6scale2m-ndrpdr

RFC2544: Pkt throughput IPv6 routing test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv6 for IPv6 routing.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and 2x1M static IPv6 /64 route entries. DUT1 and DUT2 tested with Intel-X520-DA2.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 1M flows per flow-group) with all packets containing Ethernet header, IPv6 header with IP and static payload. MAC addresses are matching MAC addresses of the TG node interfaces. Incrementing of IP.dst (IPv6 destination address) field is applied to both streams.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
1. Mpps Gbps (NDR)
2. Mpps Gbps (PDR)

One-Way Latency Percentiles in uSec at %PDR load,
one set per each direction:
3. P50 P90 P99 P50 P90 P99 (10% PDR)
4. P50 P90 P99 P50 P90 P99 (50% PDR)
5. P50 P90 P99 P50 P90 P99 (90% PDR)

 78b-2t2c- 
ethip6-ip6scale2m-ndrpdr

 1.  3.38       2.65 
2. 3.45 2.70

3. 23 57 79 23 61 78
4. 54 95 110 56 94 121
5. 103 138 160 108 143 165

 78b-4t4c- 
ethip6-ip6scale2m-ndrpdr

 1.  4.22       3.31 
2. 4.22 3.31

3. 22 36 42 23 35 47
4. 43 72 89 40 68 93
5. 74 95 121 75 96 115