3n-skx-xxv710

25ge2p1xxv710-avf-ethip6-ip6base-ndrpdr

RFC2544: Pkt throughput IPv6 routing test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv6 for IPv6 routing.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and two static IPv6 /64 route entries. DUT1 and DUT2 tested with Intel-XXV710.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv6 header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
1. Mpps Gbps (NDR)
2. Mpps Gbps (PDR)

One-Way Latency Percentiles in uSec at %PDR load,
one set per each direction:
3. P50 P90 P99 P50 P90 P99 (10% PDR)
4. P50 P90 P99 P50 P90 P99 (50% PDR)
5. P50 P90 P99 P50 P90 P99 (90% PDR)

 78b-2t1c-avf- 
ethip6-ip6base-ndrpdr

 1.  9.68       7.59 
2. 18.39 14.41

3. 17 28 33 18 28 33
4. 30 36 40 32 37 41
5. 70 78 85 71 80 86

 78b-4t2c-avf- 
ethip6-ip6base-ndrpdr

 1. 18.60      14.58 
2. 35.86 28.12

3. 24 35 45 24 36 49
4. 33 37 40 34 38 41
5. 69 77 84 70 78 85

 78b-8t4c-avf- 
ethip6-ip6base-ndrpdr

 1. 31.69      24.85 
2. 34.51 27.06

3. 21 27 33 22 28 34
4. 27 34 39 28 35 38
5. 36 42 47 36 40 45

25ge2p1xxv710-avf-ethip6-ip6scale200k-ndrpdr

RFC2544: Pkt throughput IPv6 routing test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv6 for IPv6 routing.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and 2x100k static IPv6 /64 route entries. DUT1 and DUT2 tested with Intel-XXV710.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 100k flows per flow-group) with all packets containing Ethernet header, IPv6 header with IP and static payload. MAC addresses are matching MAC addresses of the TG node interfaces. Incrementing of IP.dst (IPv6 destination address) field is applied to both streams.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
1. Mpps Gbps (NDR)
2. Mpps Gbps (PDR)

One-Way Latency Percentiles in uSec at %PDR load,
one set per each direction:
3. P50 P90 P99 P50 P90 P99 (10% PDR)
4. P50 P90 P99 P50 P90 P99 (50% PDR)
5. P50 P90 P99 P50 P90 P99 (90% PDR)

 78b-2t1c-avf- 
ethip6-ip6scale200k-ndrpdr

 1.  8.88       6.96 
2. 12.57 9.86

3. 18 26 32 17 25 30
4. 33 44 50 34 44 50
5. 72 90 346 73 89 360

 78b-4t2c-avf- 
ethip6-ip6scale200k-ndrpdr

 1. 16.99      13.32 
2. 21.38 16.76

3. 17 26 40 20 30 38
4. 32 38 43 32 38 43
5. 71 86 117 70 86 117

 78b-8t4c-avf- 
ethip6-ip6scale200k-ndrpdr

 1. 33.59      26.34 
2. 34.79 27.28

3. 21 28 34 20 27 33
4. 31 36 41 31 36 40
5. 50 73 107 51 74 107

25ge2p1xxv710-avf-ethip6-ip6scale20k-ndrpdr

RFC2544: Pkt throughput IPv6 routing test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv6 for IPv6 routing.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and 2x10k static IPv6 /64 route entries. DUT1 and DUT2 tested with Intel-XXV710.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 10k flows per flow-group) with all packets containing Ethernet header, IPv6 header with IP and static payload. MAC addresses are matching MAC addresses of the TG node interfaces. Incrementing of IP.dst (IPv6 destination address) field is applied to both streams.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
1. Mpps Gbps (NDR)
2. Mpps Gbps (PDR)

One-Way Latency Percentiles in uSec at %PDR load,
one set per each direction:
3. P50 P90 P99 P50 P90 P99 (10% PDR)
4. P50 P90 P99 P50 P90 P99 (50% PDR)
5. P50 P90 P99 P50 P90 P99 (90% PDR)

 78b-2t1c-avf- 
ethip6-ip6scale20k-ndrpdr

 1.  8.38       6.57 
2. 14.70 11.52

3. 17 22 30 17 24 30
4. 31 40 49 32 39 44
5. 67 77 85 68 78 87

 78b-4t2c-avf- 
ethip6-ip6scale20k-ndrpdr

 1. 18.63      14.61 
2. 29.85 23.40

3. 22 35 47 25 36 47
4. 31 40 44 33 40 44
5. 75 86 95 76 87 96

 78b-8t4c-avf- 
ethip6-ip6scale20k-ndrpdr

 1. 31.27      24.51 
2. 35.98 28.21

3. 19 27 34 20 27 35
4. 30 37 41 30 36 39
5. 44 50 58 44 50 59

25ge2p1xxv710-avf-ethip6-ip6scale2m-ndrpdr

RFC2544: Pkt throughput IPv6 routing test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv6 for IPv6 routing.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and 2x1M static IPv6 /64 route entries. DUT1 and DUT2 tested with Intel-XXV710.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 1M flows per flow-group) with all packets containing Ethernet header, IPv6 header with IP and static payload. MAC addresses are matching MAC addresses of the TG node interfaces. Incrementing of IP.dst (IPv6 destination address) field is applied to both streams.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
1. Mpps Gbps (NDR)
2. Mpps Gbps (PDR)

One-Way Latency Percentiles in uSec at %PDR load,
one set per each direction:
3. P50 P90 P99 P50 P90 P99 (10% PDR)
4. P50 P90 P99 P50 P90 P99 (50% PDR)
5. P50 P90 P99 P50 P90 P99 (90% PDR)

 78b-2t1c-avf- 
ethip6-ip6scale2m-ndrpdr

 1.  8.77       6.88 
2. 10.56 8.28

3. 17 26 33 17 23 29
4. 32 43 51 34 45 56
5. 73 90 116 72 90 116

 78b-4t2c-avf- 
ethip6-ip6scale2m-ndrpdr

 1. 15.50      12.15 
2. 18.10 14.19

3. 20 32 45 19 29 42
4. 33 39 45 33 40 45
5. 88 109 141 89 110 140

 78b-8t4c-avf- 
ethip6-ip6scale2m-ndrpdr

 1. 18.53      14.52 
2. 30.28 23.74

3. 21 27 34 20 27 34
4. 33 40 45 32 40 45
5. 58 110 250 59 112 254

25ge2p1xxv710-ethip6-ip6base-ndrpdr

RFC2544: Pkt throughput IPv6 routing test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv6 for IPv6 routing.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and two static IPv6 /64 route entries. DUT1 and DUT2 tested with Intel-XXV710.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv6 header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
1. Mpps Gbps (NDR)
2. Mpps Gbps (PDR)

One-Way Latency Percentiles in uSec at %PDR load,
one set per each direction:
3. P50 P90 P99 P50 P90 P99 (10% PDR)
4. P50 P90 P99 P50 P90 P99 (50% PDR)
5. P50 P90 P99 P50 P90 P99 (90% PDR)

 78b-2t1c-ethip6-ip6base-ndrpdr 

 1. 14.44      11.32 
2. 14.55 11.41

3. 23 43 67 20 46 71
4. 32 42 51 37 51 65
5. 66 77 86 66 77 86

 78b-4t2c-ethip6-ip6base-ndrpdr 

 1. 28.90      22.66 
2. 30.08 23.59

3. 27 44 53 29 43 58
4. 31 35 40 31 35 39
5. 71 84 96 71 84 95

 78b-8t4c-ethip6-ip6base-ndrpdr 

 1. 34.25      26.85 
2. 35.29 27.67

3. 26 52 62 26 37 52
4. 27 31 35 26 31 35
5. 37 42 46 36 40 43

25ge2p1xxv710-ethip6-ip6scale2m-ndrpdr

RFC2544: Pkt throughput IPv6 routing test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv6 for IPv6 routing.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and 2x1M static IPv6 /64 route entries. DUT1 and DUT2 tested with Intel-XXV710.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 1M flows per flow-group) with all packets containing Ethernet header, IPv6 header with IP and static payload. MAC addresses are matching MAC addresses of the TG node interfaces. Incrementing of IP.dst (IPv6 destination address) field is applied to both streams.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
1. Mpps Gbps (NDR)
2. Mpps Gbps (PDR)

One-Way Latency Percentiles in uSec at %PDR load,
one set per each direction:
3. P50 P90 P99 P50 P90 P99 (10% PDR)
4. P50 P90 P99 P50 P90 P99 (50% PDR)
5. P50 P90 P99 P50 P90 P99 (90% PDR)

 78b-2t1c- 
ethip6-ip6scale2m-ndrpdr

 1.  8.16       6.40 
2. 8.37 6.56

3. 24 59 77 18 43 71
4. 36 50 66 42 60 77
5. 72 88 114 73 91 113

 78b-4t2c- 
ethip6-ip6scale2m-ndrpdr

 1. 14.94      11.71 
2. 15.39 12.07

3. 26 56 71 32 48 73
4. 31 41 48 33 41 50
5. 75 94 111 76 94 111

 78b-8t4c- 
ethip6-ip6scale2m-ndrpdr

 1. 28.65      22.46 
2. 29.37 23.03

3. 35 52 73 32 48 63
4. 34 40 49 33 40 48
5. 87 111 133 86 110 134