crypto

eth2p-ethip4ipsec1tnlsw-ip4base-policy-aes-128-cbc-sha-512-256-dev

IPv4 IPsec tunnel mode test suite.

  • [Top] Network topologies: TG-DUT1 2-node topology with one link between nodes.

  • [Cfg] DUT configuration: On DUT1 create loopback interface, configure loopback an physical interface IPv4 addresses, static ARP record, route and IPsec manual keyed connection in tunnel mode.

  • [Ver] TG verification: ESP packet is sent from TG to DUT1. ESP packet is received on TG from DUT1.

  • [Ref] Applicable standard specifications: RFC4303.

 Test Name 

 Status 

 110b-ethip4ipsec1tnlsw-ip4base-policy-aes- 
 128-cbc-sha-512-256-dev

PASS

eth2p-ethip4ipsec1tptsw-ip4base-policy-aes-128-cbc-sha-512-256-dev

IPv4 IPsec transport mode test suite.

  • [Top] Network topologies: TG-DUT1 2-node topology with one link between nodes.

  • [Cfg] DUT configuration: On DUT1 create loopback interface, configure loopback an physical interface IPv4 addresses, static ARP record, route and IPsec manual keyed connection in transport mode.

  • [Ver] TG verification: ESP packet is sent from TG to DUT1. ESP packet is received on TG from DUT1.

  • [Ref] Applicable standard specifications: RFC4303.

 Test Name 

 Status 

 110b-ethip4ipsec1tptsw-ip4base-policy-aes- 
 128-cbc-sha-512-256-dev

PASS

eth2p-ethip6ipsec1tnlsw-ip6base-policy-aes-128-cbc-sha-512-256-dev

IPv6 IPsec tunnel mode test suite.

  • [Top] Network topologies: TG-DUT1 2-node topology with one link between nodes.

  • [Cfg] DUT configuration: On DUT1 create loopback interface, configure loopback an physical interface IPv6 addresses, static ARP record, route and IPsec manual keyed connection in tunnel mode.

  • [Ver] TG verification: ESP packet is sent from TG to DUT1. ESP packet is received on TG from DUT1.

  • [Ref] Applicable standard specifications: RFC4303.

 Test Name 

 Status 

 124b-ethip6ipsec1tnlsw-ip6base-policy-aes- 
 128-cbc-sha-512-256-dev

PASS

eth2p-ethip6ipsec1tptsw-ip6base-policy-aes-128-cbc-sha-512-256-dev

IPv6 IPsec transport mode test suite.

  • [Top] Network topologies: TG-DUT1 2-node topology with one link between nodes.

  • [Cfg] DUT configuration: On DUT1 create loopback interface, configure loopback an physical interface IPv6 addresses, static ARP record, route and IPsec manual keyed connection in transport mode.

  • [Ver] TG verification: ESP packet is sent from TG to DUT1. ESP packet is received on TG from DUT1.

  • [Ref] Applicable standard specifications: RFC4303.

 Test Name 

 Status 

 124b-ethip6ipsec1tptsw-ip6base-policy-aes- 
 128-cbc-sha-512-256-dev

PASS