func

crypto

default

eth2p-ethip4ipsectnl-ip4base-func

IPv4 IPsec tunnel mode test suite.

  • [Top] Network topologies: TG-DUT1 2-node topology with one link between nodes.
  • [Cfg] DUT configuration: On DUT1 create loopback interface, configure loopback an physical interface IPv4 addresses, static ARP record, route and IPsec manual keyed connection in tunnel mode.
  • [Ver] TG verification: ESP packet is sent from TG to DUT1. ESP packet is received on TG from DUT1.
  • [Ref] Applicable standard specifications: RFC4303.
Name VPP API Test Commands History - Commands Used Per Test Case
tc01: vpp process esp packet in tunnel mode with aes-cbc-128 encryption and sha1-96 integrity No Data
tc05: vpp process esp packet in tunnel mode with aes-cbc-192 encryption and sha-256-128 integrity No Data
tc09: vpp process esp packet in tunnel mode with aes-cbc-256 encryption and sha-384-192 integrity No Data
tc12: vpp process esp packet in tunnel mode with aes-cbc-256 encryption and sha-512-256 integrity No Data
tc13: vpp process esp packet in tunnel mode with aes-cbc-128 encryption and sha1-96 integrity - different encryption alogrithms used No Data
tc14: vpp process esp packet in tunnel mode with aes-cbc-128 encryption and sha1-96 integrity - different integrity alogrithms used No Data
tc15: vpp process esp packet in tunnel mode with aes-cbc-128 encryption and sha1-96 integrity - different encryption and integrity alogrithms used No Data
tc16: vpp process esp packet in tunnel mode with aes-cbc-128 encryption and sha1-96 integrity with update sa keys No Data
tc17: vpp process esp packet in tunnel mode with aes-cbc-128 encryption and sha1-96 integrity with update sa keys - different encryption alogrithms used No Data
tc18: vpp process esp packet in tunnel mode with aes-cbc-128 encryption and sha1-96 integrity with update sa keys - different integrity alogrithms used No Data
tc19: vpp process esp packet in tunnel mode with aes-cbc-128 encryption and sha1-96 integrity with update sa keys - different encryption and integrity alogrithms used No Data

eth2p-ethip4ipsectpt-ip4base-func

IPv4 IPsec transport mode test suite.

  • [Top] Network topologies: TG-DUT1 2-node topology with one link between nodes.
  • [Cfg] DUT configuration: On DUT1 create loopback interface, configure loopback an physical interface IPv4 addresses, static ARP record, route and IPsec manual keyed connection in transport mode.
  • [Ver] TG verification: ESP packet is sent from TG to DUT1. ESP packet is received on TG from DUT1.
  • [Ref] Applicable standard specifications: RFC4303.
Name VPP API Test Commands History - Commands Used Per Test Case
tc01: vpp process esp packet in transport mode with aes-cbc-128 encryption and sha1-96 integrity No Data
tc05: vpp process esp packet in transport mode with aes-cbc-192 encryption and sha-256-128 integrity No Data
tc09: vpp process esp packet in transport mode with aes-cbc-256 encryption and sha-384-192 integrity No Data
tc12: vpp process esp packet in transport mode with aes-cbc-256 encryption and sha-512-256 integrity No Data
tc13: vpp process esp packet in transport mode with aes-cbc-128 encryption and sha1-96 integrity - different encryption alogrithms used No Data
tc14: vpp process esp packet in transport mode with aes-cbc-128 encryption and sha1-96 integrity - different integrity alogrithms used No Data
tc15: vpp process esp packet in transport mode with aes-cbc-128 encryption and sha1-96 integrity - different encryption and integrity alogrithms used No Data
tc16: vpp process esp packet in transport mode with aes-cbc-128 encryption and sha1-96 integrity with update sa keys No Data
tc17: vpp process esp packet in transport mode with aes-cbc-128 encryption and sha1-96 integrity with update sa keys - different encryption alogrithms used No Data
tc18: vpp process esp packet in transport mode with aes-cbc-128 encryption and sha1-96 integrity with update sa keys - different integrity alogrithms used No Data
tc19: vpp process esp packet in transport mode with aes-cbc-128 encryption and sha1-96 integrity with update sa keys - different encryption and integrity alogrithms used No Data

eth2p-ethip4ipsectptlispgpe-ip4base-func

IPv4-ip4-ipsec-lispgpe-ip4 - main fib, vrf (gpe_vni-to-vrf)

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: ICMPv4-IPv4-IPSec-LISPGPE-IPv4-ICMPv4.
  • [Cfg] DUT configuration: Each DUT is configured with LISP and IPsec. IPsec is in transport mode. Tests cases are for IPsec configured both on RLOC interface or lisp_gpe0 interface.
  • [Ver] TG verification: Packet is send from TG(if1) across the DUT1 to DUT2 where it is forwarded to TG(if2).
  • [Ref] Applicable standard specifications: RFC6830, RFC4303.
Name VPP API Test Commands History - Commands Used Per Test Case
tc01: dut1 and dut2 route ipv4 bidirectionally over lisp gpe tunnel using ipsec (transport) on rloc int. No Data
tc02: dut1 and dut2 route ipv4 bidirectionally over lisp gpe tunnel using ipsec (transport) lisp_gpe0 int. No Data
tc03: dut1 and dut2 route ipv4 bidirectionally over lisp gpe tunnel using ipsec (transport) on rloc int and vrf on eid is enabled. No Data
tc04: dut1 and dut2 route ipv4 bidirectionally over lisp gpe tunnel using ipsec (transport) on lisp_gpe0 int and vrf is enabled. No Data

eth2p-ethip4ipsectptlispgpe-ip6base-func

IPv6 - ip4-ipsec-lispgpe-ip6 - main fib, vrf, virt2lisp, phy2lisp

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4-LISPGPE-IPSec-IPv6-ICMP, Eth-IPv4-IPSec-LISPGPE-IPv6-ICMP
  • [Cfg] DUT configuration: Each DUT is configured with LISP and IPsec. IPsec is in transport mode. Tests cases are for IPsec configured both on RLOC interface or lisp_gpe0 interface.
  • [Ver] TG verification: Packet is send from TG(if1) across the DUT1 to DUT2 where it is forwarded to TG(if2).
  • [Ref] Applicable standard specifications: RFC6830, RFC4303.
Name VPP API Test Commands History - Commands Used Per Test Case
tc01: dut1 and dut2 route ipv4 bidirectionally over lisp gpe tunnel using ipsec (transport) on rloc int. No Data
tc02: dut1 and dut2 route ipv4 bidirectionally over lisp gpe tunnel using ipsec (transport) on lisp_gpe0 int. No Data

eth2p-ethip4ipsectptlispgpe-ip6basevrf-func

IPv6 - ip4-ipsec-lispgpe-ip6 - main fib, vrf, virt2lisp, phy2lisp

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4-LISPGPE-IPSec-IPv6-ICMP, Eth-IPv4-IPSec-LISPGPE-IPv6-ICMP
  • [Cfg] DUT configuration: Each DUT is configured with LISP and IPsec. IPsec is in transport mode. Tests cases are for IPsec configured both on RLOC interface or lisp_gpe0 interface.
  • [Ver] TG verification: Packet is send from TG(if1) across the DUT1 to DUT2 where it is forwarded to TG(if2).
  • [Ref] Applicable standard specifications: RFC6830, RFC4303.
Name VPP API Test Commands History - Commands Used Per Test Case
tc01: dut1 and dut2 route ipv6 bidirectionally over lisp gpe tunnel using physical interfaces and vrf is enabled No Data

eth2p-ethip6ipsectnl-ip6base-func

IPv6 IPsec tunnel mode test suite.

  • [Top] Network topologies: TG-DUT1 2-node topology with one link between nodes.
  • [Cfg] DUT configuration: On DUT1 create loopback interface, configure loopback an physical interface IPv6 addresses, static ARP record, route and IPsec manual keyed connection in tunnel mode.
  • [Ver] TG verification: ESP packet is sent from TG to DUT1. ESP packet is received on TG from DUT1.
  • [Ref] Applicable standard specifications: RFC4303.
Name VPP API Test Commands History - Commands Used Per Test Case
tc01: vpp process esp packet in tunnel mode with aes-cbc-128 encryption and sha1-96 integrity No Data
tc05: vpp process esp packet in tunnel mode with aes-cbc-192 encryption and sha-256-128 integrity No Data
tc09: vpp process esp packet in tunnel mode with aes-cbc-256 encryption and sha-384-192 integrity No Data
tc12: vpp process esp packet in tunnel mode with aes-cbc-256 encryption and sha-512-256 integrity No Data
tc13: vpp process esp packet in tunnel mode with aes-cbc-128 encryption and sha1-96 integrity - different encryption alogrithms used No Data
tc14: vpp process esp packet in tunnel mode with aes-cbc-128 encryption and sha1-96 integrity - different integrity alogrithms used No Data
tc15: vpp process esp packet in tunnel mode with aes-cbc-128 encryption and sha1-96 integrity - different encryption and integrity alogrithms used No Data
tc16: vpp process esp packet in tunnel mode with aes-cbc-128 encryption and sha1-96 integrity with update sa keys No Data
tc17: vpp process esp packet in tunnel mode with aes-cbc-128 encryption and sha1-96 integrity with update sa keys - different encryption alogrithms used No Data
tc18: vpp process esp packet in tunnel mode with aes-cbc-128 encryption and sha1-96 integrity with update sa keys - different integrity alogrithms used No Data
tc19: vpp process esp packet in tunnel mode with aes-cbc-128 encryption and sha1-96 integrity with update sa keys - different encryption and integrity alogrithms used No Data

eth2p-ethip6ipsectpt-ip6base-func

IPv6 IPsec transport mode test suite.

  • [Top] Network topologies: TG-DUT1 2-node topology with one link between nodes.
  • [Cfg] DUT configuration: On DUT1 create loopback interface, configure loopback an physical interface IPv6 addresses, static ARP record, route and IPsec manual keyed connection in transport mode.
  • [Ver] TG verification: ESP packet is sent from TG to DUT1. ESP packet is received on TG from DUT1.
  • [Ref] Applicable standard specifications: RFC4303.
Name VPP API Test Commands History - Commands Used Per Test Case
tc01: vpp process esp packet in transport mode with aes-cbc-128 encryption and sha1-96 integrity No Data
tc05: vpp process esp packet in transport mode with aes-cbc-192 encryption and sha-256-128 integrity No Data
tc09: vpp process esp packet in transport mode with aes-cbc-256 encryption and sha-384-192 integrity No Data
tc12: vpp process esp packet in transport mode with aes-cbc-256 encryption and sha-512-256 integrity No Data
tc13: vpp process esp packet in transport mode with aes-cbc-128 encryption and sha1-96 integrity - different encryption alogrithms used No Data
tc14: vpp process esp packet in transport mode with aes-cbc-128 encryption and sha1-96 integrity - different integrity alogrithms used No Data
tc15: vpp process esp packet in transport mode with aes-cbc-128 encryption and sha1-96 integrity - different encryption and integrity alogrithms used No Data
tc16: vpp process esp packet in transport mode with aes-cbc-128 encryption and sha1-96 integrity with update sa keys No Data
tc17: vpp process esp packet in transport mode with aes-cbc-128 encryption and sha1-96 integrity with update sa keys - different encryption alogrithms used No Data
tc18: vpp process esp packet in transport mode with aes-cbc-128 encryption and sha1-96 integrity with update sa keys - different integrity alogrithms used No Data
tc19: vpp process esp packet in transport mode with aes-cbc-128 encryption and sha1-96 integrity with update sa keys - different encryption and integrity alogrithms used No Data

eth2p-ethip6ipsectptlispgpe-ip4base-func

IPv6 - ip4-ipsec-lispgpe-ip6 - main fib, virt2lisp, phy2lisp

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv6-LISPGPE-IPSec-IPv4-ICMP, Eth-IPv6-IPSec-LISPGPE-IPv4-ICMP
  • [Cfg] DUT configuration: Each DUT is configured with LISP and IPsec. IPsec is in transport mode. Tests cases are for IPsec configured both on RLOC interface or lisp_gpe0 interface.
  • [Ver] TG verification: Packet is send from TG(if1) across the DUT1 to DUT2 where it is forwarded to TG(if2).
  • [Ref] Applicable standard specifications: RFC6830, RFC4303.
Name VPP API Test Commands History - Commands Used Per Test Case
tc01: dut1 and dut2 route ipv4 bidirectionally over lisp gpe tunnel using ipsec (transport) on rloc int. No Data
tc02: dut1 and dut2 route ipv4 bidirectionally over lisp gpe tunnel using ipsec (transport) on lisp_gpe0 int. No Data

eth2p-ethip6ipsectptlispgpe-ip6base-func

IPv6 - ip6-ipsec-lispgpe-ip6 - main fib, vrf (gpe_vni-to-vrf), phy2lisp, virt2lisp

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv6-IPSec-LISPGPE-IPv6-ICMPv6,
  • [Cfg] DUT configuration: Each DUT is configured with LISP and IPsec. IPsec is in transport mode. Tests cases are for IPsec configured both on RLOC interface or lisp_gpe0 interface.
  • [Ver] TG verification: Packet is send from TG(if1) across the DUT1 to DUT2 where it is forwarded to TG(if2).
  • [Ref] Applicable standard specifications: RFC6830, RFC4303.
Name VPP API Test Commands History - Commands Used Per Test Case
tc01: dut1 and dut2 route ipv6 bidirectionally over lisp gpe tunnel using ipsec (transport) on rloc int. No Data
tc02: dut1 and dut2 route ipv6 bidirectionally over lisp gpe tunnel using ipsec (transport) lisp_gpe0 int. No Data

sw device

eth2p-ethip4ipsectnlsw-ip4base-func

IPv4 SW cryptodev IPsec tunnel mode test suite.

  • [Top] Network topologies: TG-DUT1 2-node topology with one link between nodes.
  • [Cfg] DUT configuration: With enabled SW crytodev on DUT1 create loopback interface, configure loopback and physical interface IPv4 addresses, static ARP record, route and IPsec manual keyed connection in tunnel mode.
  • [Ver] TG verification: ESP packet is sent from TG to DUT1. ESP packet is received on TG from DUT1.
  • [Ref] Applicable standard specifications: RFC4303.
Name VPP API Test Commands History - Commands Used Per Test Case
tc01: vpp process esp packet in tunnel mode with aes-cbc-128 encryption and sha1-96 integrity No Data
tc05: vpp process esp packet in tunnel mode with aes-cbc-192 encryption and sha-256-128 integrity No Data
tc09: vpp process esp packet in tunnel mode with aes-cbc-256 encryption and sha-384-192 integrity No Data
tc12: vpp process esp packet in tunnel mode with aes-cbc-256 encryption and sha-512-256 integrity No Data
tc13: vpp process esp packet in tunnel mode with aes-cbc-128 encryption and sha1-96 integrity - different encryption alogrithms used No Data
tc14: vpp process esp packet in tunnel mode with aes-cbc-128 encryption and sha1-96 integrity - different integrity alogrithms used No Data
tc15: vpp process esp packet in tunnel mode with aes-cbc-128 encryption and sha1-96 integrity - different encryption and integrity alogrithms used No Data
tc16: vpp process esp packet in tunnel mode with aes-cbc-128 encryption and sha1-96 integrity with update sa keys No Data
tc17: vpp process esp packet in tunnel mode with aes-cbc-128 encryption and sha1-96 integrity with update sa keys - different encryption alogrithms used No Data
tc18: vpp process esp packet in tunnel mode with aes-cbc-128 encryption and sha1-96 integrity with update sa keys - different integrity alogrithms used No Data
tc19: vpp process esp packet in tunnel mode with aes-cbc-128 encryption and sha1-96 integrity with update sa keys - different encryption and integrity alogrithms used No Data

eth2p-ethip4ipsectptsw-ip4base-func

IPv4 IPsec transport mode test suite.

  • [Top] Network topologies: TG-DUT1 2-node topology with one link between nodes.
  • [Cfg] DUT configuration: With enabled SW crytodev on DUT1 create loopback interface, configure loopback and physical interface IPv4 addresses, static ARP record, route and IPsec manual keyed connection in transport mode.
  • [Ver] TG verification: ESP packet is sent from TG to DUT1. ESP packet is received on TG from DUT1.
  • [Ref] Applicable standard specifications: RFC4303.
Name VPP API Test Commands History - Commands Used Per Test Case
tc01: vpp process esp packet in transport mode with aes-cbc-128 encryption and sha1-96 integrity No Data
tc05: vpp process esp packet in transport mode with aes-cbc-192 encryption and sha-256-128 integrity No Data
tc09: vpp process esp packet in transport mode with aes-cbc-256 encryption and sha-384-192 integrity No Data
tc12: vpp process esp packet in transport mode with aes-cbc-256 encryption and sha-512-256 integrity No Data
tc13: vpp process esp packet in transport mode with aes-cbc-128 encryption and sha1-96 integrity - different encryption alogrithms used No Data
tc14: vpp process esp packet in transport mode with aes-cbc-128 encryption and sha1-96 integrity - different integrity alogrithms used No Data
tc15: vpp process esp packet in transport mode with aes-cbc-128 encryption and sha1-96 integrity - different encryption and integrity alogrithms used No Data
tc16: vpp process esp packet in transport mode with aes-cbc-128 encryption and sha1-96 integrity with update sa keys No Data
tc17: vpp process esp packet in transport mode with aes-cbc-128 encryption and sha1-96 integrity with update sa keys - different encryption alogrithms used No Data
tc18: vpp process esp packet in transport mode with aes-cbc-128 encryption and sha1-96 integrity with update sa keys - different integrity alogrithms used No Data
tc19: vpp process esp packet in transport mode with aes-cbc-128 encryption and sha1-96 integrity with update sa keys - different encryption and integrity alogrithms used No Data

interfaces

api-crud-tap-func

Tap Interface CRUD Tests

  • [Top] Network Topologies: TG=DUT1 2-node topology with two links between nodes.
  • [Enc] Packet Encapsulations: No packet sent.
  • [Cfg] DUT configuration: Add/Modify/Delete linux-TAP on DUT1.
  • [Ver] Verification: Check dump of tap interfaces for correctness.
  • [Ref] Applicable standard specifications:
Name VPP API Test Commands History - Commands Used Per Test Case
tc01: tap interface modify and delete No Data

eth2p-eth-l2bdbasemaclrn-eth-2tap-func

Tap Interface Traffic Tests

  • [Top] Network Topologies: TG=DUT1 2-node topology with two links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4-ICMPv4 for L2 switching of IPv4.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge-domain (L2BD) MAC learning enabled; Split Horizon Groups (SHG) are set depending on test case; Namespaces (NM) are set on DUT1 with attached linux-TAP.
  • [Ver] TG verification: Test ICMPv4 Echo Request packets are sent by TG on link to DUT1; On receipt TG verifies packets for correctness and their IPv4 src-addr, dst-addr, and MAC addresses.
  • [Ref] Applicable standard specifications:
Name VPP API Test Commands History - Commands Used Per Test Case
tc01: tap interface simple bd No Data

eth2p-eth-l2bdbasemaclrn-l2shg-eth-2tap-func

Tap Interface Traffic Tests

  • [Top] Network Topologies: TG=DUT1 2-node topology with two links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4-ICMPv4 for L2 switching of IPv4.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge-domain (L2BD) MAC learning enabled; Split Horizon Groups (SHG) are set depending on test case; Namespaces (NM) are set on DUT1 with attached linux-TAP.
  • [Ver] TG verification: Test ICMPv4 Echo Request packets are sent by TG on link to DUT1; On receipt TG verifies packets for correctness and their IPv4 src-addr, dst-addr, and MAC addresses.
  • [Ref] Applicable standard specifications:
Name VPP API Test Commands History - Commands Used Per Test Case
tc01: tap interface bd - different split horizon No Data
tc02: tap interface bd - same split horizon No Data

eth2p-ethip4-ip4base-eth-1tap-func

Tap Interface Traffic Tests

  • [Top] Network Topologies: TG=DUT1 2-node topology with two links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4-ICMPv4 for L2 switching of IPv4.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge-domain (L2BD) MAC learning enabled; Split Horizon Groups (SHG) are set depending on test case; Namespaces (NM) are set on DUT1 with attached linux-TAP.
  • [Ver] TG verification: Test ICMPv4 Echo Request packets are sent by TG on link to DUT1; On receipt TG verifies packets for correctness and their IPv4 src-addr, dst-addr, and MAC addresses.
  • [Ref] Applicable standard specifications:
Name VPP API Test Commands History - Commands Used Per Test Case
tc01: tap interface ip ping without namespace No Data
tc02: tap interface ip ping with namespace No Data

ip4

eth2p-dot1q-ip4base-func

IPv4 with VLAN subinterfaces

  • [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with double links between nodes.
  • [Enc] Packet encapsulations: Eth-IPv4-ICMPv4 on TG-DUT1-IF1, Eth-dot1q-IPv4-ICMPv4 on TG-DUT1-IF2.
  • [Cfg] DUT configuration: DUT1 is configured with 2 Vlan subinterfaces on DUT1-IF2. The subinterfaces and DUT1-IF1 have IP addresses set and corresponding IP neighbor entries are configured.
  • [Ref] Applicable standard specifications: IEEE 802.1q.
Name VPP API Test Commands History - Commands Used Per Test Case
tc01: process untagged send tagged No Data
tc02: process tagged send untagged No Data
tc03: process tagged send tagged No Data

eth2p-ethip4-ip4base-copblklistbase-func

COP Security IPv4 Blacklist Tests

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4-ICMPv4 on all links.
  • [Cfg] DUT configuration: DUT1 is configured with IPv4 routing and static routes. COP security black-lists are applied on DUT1 ingress interface from TG. DUT2 is configured with L2XC.
  • [Ver] TG verification: Test ICMPv4 Echo Request packets are sent in one direction by TG on link to DUT1; on receive TG verifies packets for correctness and drops as applicable.
  • [Ref] Applicable standard specifications:
Name VPP API Test Commands History - Commands Used Per Test Case
tc01: dut drops ipv4 pkts with cop blacklist set with ipv4 src-addr No Data

eth2p-ethip4-ip4base-copwhlistbase-func

COP Security IPv4 Whitelist Tests

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4-ICMPv4 on all links.
  • [Cfg] DUT configuration: DUT1 is configured with IPv4 routing and static routes. COP security white-lists are applied on DUT1 ingress interface from TG. DUT2 is configured with L2XC.
  • [Ver] TG verification: Test ICMPv4 Echo Request packets are sent in one direction by TG on link to DUT1; on receive TG verifies packets for correctness and drops as applicable.
  • [Ref] Applicable standard specifications:
Name VPP API Test Commands History - Commands Used Per Test Case
tc01: dut permits ipv4 pkts with cop whitelist set with ipv4 src-addr No Data

eth2p-ethip4-ip4base-func

IPv4 routing test cases RFC791 IPv4, RFC826 ARP, RFC792 ICMPv4. Encapsulations: Eth-IPv4-ICMPv4 on links TG-DUT1, TG-DUT2, DUT1-DUT2. IPv4 routing tests use circular 3-node topology TG - DUT1 - DUT2 - TG with one link between the nodes. DUT1 and DUT2 are configured with IPv4 routing and static routes. Test ICMPv4 Echo Request packets are sent in both directions by TG on links to DUT1 and DUT2 and received on TG links on the other side of circular topology. On receive TG verifies packets IPv4 src-addr, dst-addr and MAC addresses.

Name VPP API Test Commands History - Commands Used Per Test Case
tc01: dut replies to icmpv4 echo req to its ingress interface No Data
tc02: dut routes ipv4 to its egress interface No Data
tc03: dut1 routes ipv4 to dut2 ingress interface No Data
tc04: dut1 routes ipv4 to dut2 egress interface No Data
tc05: dut1 and dut2 route ipv4 between tg interfaces No Data
tc06: dut replies to icmpv4 echo reqs with size 64b-to-1500b-incr-1b No Data
tc08: dut replies to arp request No Data

eth2p-ethip4-ip4base-iaclbase-func

IPv4 routing with ingress ACL test cases Encapsulations: Eth-IPv4 on links TG-DUT1, TG-DUT2, DUT1-DUT2. IPv4 ingress ACL (iACL) tests use 3-node topology TG - DUT1 - DUT2 - TG with one link between the nodes. DUT1 and DUT2 are configured with IPv4 routing and static routes. DUT1 is configured with iACL on link to TG, iACL classification and permit/deny action are configured on a per test case basis. Test ICMPv4 Echo Request packets are sent in one direction by TG on link to DUT1 and received on TG link to DUT2. On receive TG verifies if packets are dropped, or if received verifies packet IPv4 src-addr, dst-addr and MAC addresses.

Name VPP API Test Commands History - Commands Used Per Test Case
tc01: dut with iacl ipv4 src-addr drops matching pkts No Data
tc02: dut with iacl ipv4 dst-addr drops matching pkts No Data
tc03: dut with iacl ipv4 src-addr and dst-addr drops matching pkts No Data
tc04: dut with iacl ipv4 protocol set to tcp drops matching pkts No Data
tc05: dut with iacl ipv4 protocol set to udp drops matching pkts No Data
tc06: dut with iacl ipv4 tcp src-ports drops matching pkts No Data
tc07: dut with iacl ipv4 tcp dst-ports drops matching pkts No Data
tc08: dut with iacl ipv4 tcp src-ports and dst-ports drops matching pkts No Data
tc09: dut with iacl ipv4 udp src-ports drops matching pkts No Data
tc10: dut with iacl ipv4 udp dst-ports drops matching pkts No Data
tc11: dut with iacl ipv4 udp src-ports and dst-ports drops matching pkts No Data

eth2p-ethip4-ip4base-ip4arp-func

IPv4 ARP test cases RFC826 ARP: Eth-IPv4 and Eth-ARP on links TG-DUT1, TG-DUT2, DUT1-DUT2: IPv4 ARP tests use 3-node topology TG - DUT1 - DUT2 - TG with one link between the nodes. DUT1 and DUT2 are configured with IPv4 routing and static routes. DUT ARP functionality is tested by making TG send ICMPv4 Echo Requests towards its other interface via DUT1 and DUT2.

Name VPP API Test Commands History - Commands Used Per Test Case
tc01: dut sends arp request for unresolved locally connected ipv4 address No Data
tc02: dut sends arp request for route next hop ipv4 address No Data

eth2p-ethip4-ip4base-ip4dhcpclient-func

DHCPv4 Client related test cases

Name VPP API Test Commands History - Commands Used Per Test Case
tc01: vpp sends a dhcp discover No Data
tc02: vpp sends a dhcpv4 discover with hostname No Data
tc03: vpp sends dhcpv4 request after offer No Data
tc04: vpp doesn’t send dhcpv4 request after offer with wrong xid No Data
tc05: vpp honors dhcpv4 lease time No Data

eth2p-ethip4-ip4base-ip4dhcpproxy-func

DHCPv4 proxy test cases

  • [Top] Network Topologies: TG = DUT with two links between the nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4-UDP-BOOTP-DHCP
  • [Cfg] DUT configuration: DUT is configured with DHCPv4 proxy.
  • [Ver] TG verification: Test DHCPv4 packets are sent on TG on first link to DUT and received on TG on second link. On receive TG verifies if DHCPv4 packets are valid.
Name VPP API Test Commands History - Commands Used Per Test Case
tc01: vpp proxies valid dhcpv4 request to dhcpv4 server No Data
tc02: vpp proxy ignores invalid dhcpv4 request No Data

eth2p-ethip4-ip4base-ip4ecmp-func

Ipv4 Multipath routing test cases

  • [Top] Network topologies: TG=DUT 2-node topology with two links between nodes.
  • [Cfg] DUT configuration: On DUT configure interfaces IPv4 adresses, and multipath routing.
  • [Ver] TG verification: Test packets are sent from TG on the first link to DUT. Packet is received on TG on the second link from DUT1.
Name VPP API Test Commands History - Commands Used Per Test Case
tc01: ipv4 equal-cost multipath routing No Data

eth2p-ethip4-ip4base-ip4proxyarp-func

RFC1027 Proxy ARP test cases

  • [Top] Network topologies: TG-DUT1 2-node topology with single link between nodes.
  • [Cfg] DUT configuration: DUT1 is configured with Proxy ARP
  • [Ver] TG verification: Test ARP Request packet is sent from TG on link to DUT1; on receive TG verifies ARP reply packet for correctness and their IPv4 src-addr, dst-addr and MAC addresses.
  • [Ref] Applicable standard specifications: RFC1027.
Name VPP API Test Commands History - Commands Used Per Test Case
tc01: dut sends arp reply on behalf of another machine from the ip range No Data
tc02: dut sends arp reply on behalf of another machine from beginning of the ip range No Data
tc03: dut sends arp reply on behalf of another machine from end of the ip range No Data
tc04: dut does not send arp reply on behalf of another machine from below of the ip range No Data
tc05: dut does not send arp reply on behalf of another machine from above of the ip range No Data

eth2p-ethip4-ip4base-ipolicemarkbase-func

IPv4 policer test cases

  • [Top] Network topologies: TG=DUT1 2-node topology with two links between nodes.
  • [Cfg] DUT configuration: On DUT1 configure interfaces IPv4 adresses, and static ARP record on the second interface.
  • [Ver] TG verification: Test packet is sent from TG on the first link to DUT1. Packet is received on TG on the second link from DUT1.
  • [Ref] Applicable standard specifications: RFC2474, RFC2697, RFC2698.
Name VPP API Test Commands History - Commands Used Per Test Case
tc01: vpp policer 2r3c color-aware marks packet No Data
tc02: vpp policer 2r3c color-blind marks packet No Data
tc03: vpp policer 1r3c color-aware marks packet No Data
tc04: vpp policer 1r3c color-blind marks packet No Data

eth2p-ethip4-ip4base-rpf-func

Source RPF check on IPv4 test cases

  • [Top] Network Topologies: TG - DUT1 - DUT2 - TG with one link between the nodes.
  • [Cfg] DUT configuration: DUT2 is configured with L2 Cross connect. DUT1 is configured with IP source check on link to TG,
  • [Ver] TG verification: Test ICMP Echo Request packets are sent in one direction by TG on link to DUT1 and received on TG link to DUT2. On receive TG verifies if packets which source address is not in routes are dropped.
Name VPP API Test Commands History - Commands Used Per Test Case
tc01: vpp source rpf check on ipv4 src-addr No Data
tc02: vpp pass traffic on non-enabled rpf interface No Data

eth2p-ethip4-ip4basevrf-func

Vpn routed forwarding - baseline IPv4

  • [Top] Network Topologies: TG=DUT1=DUT2=TG 3-node topology with two links in between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4-ICMPv4 for L2 switching of IPv4.
  • [Cfg] DUT configuration: Each DUT is configured with two VRF tables; Separation of traffic is tested by IP packets; Basic ARP and ROUTES are set on DUT nodes; IP addresses are set on DUT interfaces.
  • [Ver] TG verification: Test ICMPv4 Echo Request packets are sent by TG on link to DUT1, DUT2 or back to TG; On receipt TG verifies packets for correctness and their IPv4 src-addr, dst-addr, and MAC addresses.
  • [Ref] Applicable standard specifications:
Name VPP API Test Commands History - Commands Used Per Test Case
tc01: tg packets routed to dut ingress interface, vpp configured with two vrfs No Data
tc02: tg packets routed to dut egress interface, vpp configured with two vrfs No Data
tc03: tg packets routed to dut2 ingress interface through dut1, vpp configured with two vrfs No Data
tc04: tg packets routed to dut2 egress interface through dut1, vpp configured with two vrfs No Data
tc05: tg packets routed to tg through dut1 and dut2, vpp configured with two vrfs No Data

ip4 tunnels

gre

eth2p-ethip4gre-ip4base-func

GREoIPv4 test cases

  • [Top] Network Topologies: TG=DUT1 2-node topology with two links between nodes; TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4-GRE-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUTn for routing over GRE tunnel; Eth-IPv4-ICMPv4 on TG_if1-DUT, Eth-IPv4-GRE-IPv4-ICMPv4 on TG_if2_DUT for GREoIPv4 encapsulation and decapsulation verification.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing and static routes. GREoIPv4 tunnel is configured between DUT1 and DUT2.
  • [Ver] TG verification: Test ICMPv4 (or ICMPv6) Echo Request packets are sent in both directions by TG on links to DUT1 and DUT2; GREoIPv4 encapsulation and decapsulation are verified separately by TG; on receive TG verifies packets for correctness and their IPv4 (IPv6) src-addr, dst-addr and MAC addresses.
  • [Ref] Applicable standard specifications: RFC2784.
Name VPP API Test Commands History - Commands Used Per Test Case
tc01: dut1 and dut2 route over greoipv4 tunnel between two tg links No Data
tc02: dut encapsulates ipv4 into greoipv4 tunnel - gre header verification No Data
tc03: dut decapsulates ipv4 from greoipv4 tunnel - ipv4 header verification No Data
tc04: dut encapsulates ipv4 into greoipv4 different tunnels - gre header verification No Data
tc05: dut re-encapsulates ipv4 gre into other gre tunnel - gre header verification No Data
tc06: dut do not process gre with wrong tunnel destination ip No Data

lisp

api-crud-lisp-func

API test cases

  • [Top] Network Topologies: DUT1 1-node topology.
  • [Enc] Packet Encapsulations: None.
  • [Cfg] DUT configuration: DUT1 gets configured with all LISP parameters.
  • [Ver] Verification: DUT1 operational data gets verified following configuration.
  • [Ref] Applicable standard specifications: RFC6830.
Name VPP API Test Commands History - Commands Used Per Test Case
tc01: dut can enable and disable lisp No Data
tc02: dut can add and delete locator_set No Data
tc03: dut can add, reset and delete locator_set No Data
tc04: dut can add and delete eid address No Data
tc05: dut can add and delete lisp map resolver address No Data

eth2p-ethip4lisp-ip4base-func

IP AFI independent functional tests.

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4-LISP-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUTn for IPv4 routing over LISPoIPv4 tunnel.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing and static routes. LISPoIPv4 tunnel is configured between DUT1 and DUT2.
  • [Ver] TG verification: Test ICMPv4 Echo Request packets are sent in both directions by TG on links to DUT1 and DUT2; on receive TG verifies packets for correctness and their IPv4 src-addr, dst-addr and MAC addresses.
  • [Ref] Applicable standard specifications: RFC6830.
Name VPP API Test Commands History - Commands Used Per Test Case
tc01: dut1 and dut2 route ipv4 over lispoipv4 tunnel after disable-enable No Data

eth2p-ethip4lisp-l2bdbasemaclrn-func

ip4-lispgpe-ip4 encapsulation test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4-ICMPv4-LISPGpe-IP4
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing and static routes. LISPoIPv4 tunnel is configured between DUT1 and DUT2.
  • [Ver] TG verification: Test ICMPv4 Echo Request packets are sent in both directions by TG on links to DUT1 and DUT2; on receive TG verifies packets for correctness and their IPv4 src-addr, dst-addr and MAC addresses.
  • [Ref] Applicable standard specifications: RFC6830.
Name VPP API Test Commands History - Commands Used Per Test Case
tc01: route ipv4 packet through lisp with bridge domain setup. No Data

eth2p-ethip4lispgpe-ip4base-func

ip4-lispgpe-ip4 encapsulation test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4-LISP-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUTn for IPv4 routing over LISPoIPv4 tunnel.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing and static routes. LISPoIPv4 tunnel is configured between DUT1 and DUT2.
  • [Ver] TG verification: Test ICMPv4 Echo Request packets are sent in both directions by TG on links to DUT1 and DUT2; on receive TG verifies packets for correctness and their IPv4 src-addr, dst-addr and MAC addresses.
  • [Ref] Applicable standard specifications: RFC6830.
Name VPP API Test Commands History - Commands Used Per Test Case
tc01: dut1 and dut2 route ipv4 bidirectionally over lisp gpe tunnel using physical interfaces No Data

eth2p-ethip4lispgpe-ip4basevrf-func

ip4-lispgpe-ip4 encapsulation test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4-LISP-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUTn for IPv4 routing over LISPoIPv4 tunnel.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing and static routes. LISPoIPv4 tunnel is configured between DUT1 and DUT2.
  • [Ver] TG verification: Test ICMPv4 Echo Request packets are sent in both directions by TG on links to DUT1 and DUT2; on receive TG verifies packets for correctness and their IPv4 src-addr, dst-addr and MAC addresses.
  • [Ref] Applicable standard specifications: RFC6830.
Name VPP API Test Commands History - Commands Used Per Test Case
tc01: dut1 and dut2 route ipv4 bidirectionally over lisp gpe tunnel using physical interfaces and vrf is enabled No Data

eth2p-ethip4lispgpe-ip6base-func

LISP static adjacency test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4-LISP-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUTn for IPv6 routing over LISPoIPv4 tunnel.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and static routes. LISPoIPv4 tunnel is configured between DUT1 and DUT2.
  • [Ver] TG verification: Test ICMPv6 Echo Request packets are sent in both directions by TG on links to DUT1 and DUT2; on receive TG verifies packets for correctness and their IPv6 src-addr, dst-addr and MAC addresses.
  • [Ref] Applicable standard specifications: RFC6830.
Name VPP API Test Commands History - Commands Used Per Test Case
tc01: dut1 and dut2 route ipv6 bidirectionally over lispoipv4 tunnel No Data

eth2p-ethip4lispgpe-ip6basevrf-func

LISP static adjacency test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4-LISP-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUTn for IPv6 routing over LISPoIPv4 tunnel.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and static routes. LISPoIPv4 tunnel is configured between DUT1 and DUT2.
  • [Ver] TG verification: Test ICMPv6 Echo Request packets are sent in both directions by TG on links to DUT1 and DUT2; on receive TG verifies packets for correctness and their IPv6 src-addr, dst-addr and MAC addresses.
  • [Ref] Applicable standard specifications: RFC6830.
Name VPP API Test Commands History - Commands Used Per Test Case
tc01: dut1 and dut2 route ipv6 bidirectionally over lisp gpe tunnel using physical interfaces and vrf is enabled No Data

vxlan

eth2p-dot1qip4vxlan-l2bdbasemaclrn-func

RFC7348 VXLAN: Bridge-domain with VXLAN over VLAN test cases

  • [Top] Network topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet encapsulations: Eth-dot1q-IPv4-VXLAN-Eth-IPv4-ICMPv4 on DUT1-DUT2, Eth-dot1q-IPv4-ICMPv4 on TG-DUTn for L2 switching of IPv4.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge-domain (L2BD) switching combined with static MACs, MAC learning enabled and Split Horizon Groups (SHG) depending on test case; VXLAN tunnels are configured between L2BDs on DUT1 and DUT2.
  • [Ver] TG verification: Test ICMPv4 Echo Request packets are sent in both directions by TG on links to DUT1 and DUT2; on receive TG verifies packets for correctness and their IPv4 src-addr, dst-addr and MAC addresses.
  • [Ref] Applicable standard specifications: RFC7348.
Name VPP API Test Commands History - Commands Used Per Test Case
tc01: dut1 and dut2 with l2bd and vxlanoipv4ovlan tunnels switch icmpv4 between tg links No Data

eth2p-ethip4vxlan-l2bdbasemaclrn-func

Bridge-domain with VXLAN test cases - IPv4

  • [Top] Network topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet encapsulations: Eth-IPv4-VXLAN-Eth-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUTn for L2 switching of IPv4.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge-domain (L2BD) switching combined with MAC learning enabled; VXLAN tunnels are configured between L2BDs on DUT1 and DUT2.
  • [Ver] TG verification: Test ICMPv4 Echo Request packets are sent in both directions by TG on links to DUT1 and DUT2; on receive TG verifies packets for correctness and their IPv4 src-addr, dst-addr and MAC addresses.
  • [Ref] Applicable standard specifications: RFC7348.
Name VPP API Test Commands History - Commands Used Per Test Case
tc01: dut1 and dut2 with l2bd and vxlanoipv4 tunnels switch icmpv4 between tg links No Data

eth2p-ethip4vxlan-l2xcbase-func

RFC7348 VXLAN: L2 cross-connect with VXLAN test cases

  • [Top] Network topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet encapsulations: Eth-IPv4-VXLAN-Eth-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUTn for L2 switching of IPv4.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 cross-connect (L2XC) switching; VXLAN tunnels are configured between L2XCs on DUT1 and DUT2.
  • [Ver] TG verification: Test ICMPv4 Echo Request packets are sent in both directions by TG on links to DUT1 and DUT2; on receive TG verifies packets for correctness and their IPv4 src-addr, dst-addr and MAC addresses.
  • [Ref] Applicable standard specifications: RFC7348.
Name VPP API Test Commands History - Commands Used Per Test Case
tc01: dut1 and dut2 with l2xc and vxlanoipv4 tunnels switch icmpv4 between tg links No Data

eth4p-ethip4vxlan-l2bdbasemaclrn-l2shg-func

L2BD with SHG combined with VXLAN test cases - IPv4

  • [Top] Network topologies: TG=DUT1=DUT2=TG 3-node circular topology with double parallel links.
  • [Enc] Packet encapsulations: Eth-IPv4-VXLAN-Eth-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUTn for L2 switching of IPv4.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge-domain (L2BD) switching combined with MAC learning enabled and Split Horizon Groups (SHG); VXLAN tunnels are configured between L2BDs on DUT1 and DUT2.
  • [Ver] TG verification: Test ICMPv4 Echo Request packets are sent in both directions by TG on links to DUT1 and DUT2; on receive TG verifies packets for correctness and their IPv4 src-addr, dst-addr and MAC addresses.
  • [Ref] Applicable standard specifications: RFC7348.
Name VPP API Test Commands History - Commands Used Per Test Case
tc01: dut1 and dut2 with l2bd and vxlanoipv4 tunnels in shg switch icmpv4 between tg links No Data
tc01: dut1 and dut2 with l2bd and vxlanoipv4 tunnels in different shgs switch icmpv4 between tg links No Data

ip6

eth2p-ethip6-ip6base-copblklistbase-func

COP Security IPv6 Blacklist Tests

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv6-ICMPv6 on all links.
  • [Cfg] DUT configuration: DUT1 is configured with IPv6 routing and static routes. COP security black-lists are applied on DUT1 ingress interface from TG. DUT2 is configured with L2XC.
  • [Ver] TG verification: Test ICMPv6 Echo Request packets are sent in one direction by TG on link to DUT1; on receive TG verifies packets for correctness and drops as applicable.
  • [Ref] Applicable standard specifications:
Name VPP API Test Commands History - Commands Used Per Test Case
tc01: dut drops ipv6 pkts with cop blacklist set with ipv6 src-addr No Data

eth2p-ethip6-ip6base-copwhlistbase-func

COP Security IPv6 Whitelist Tests

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv6-ICMPv6 on all links.
  • [Cfg] DUT configuration: DUT1 is configured with IPv6 routing and static routes. COP security white-lists are applied on DUT1 ingress interface from TG. DUT2 is configured with L2XC.
  • [Ver] TG verification: Test ICMPv6 Echo Request packets are sent in one direction by TG on link to DUT1; on receive TG verifies packets for correctness and drops as applicable.
  • [Ref] Applicable standard specifications:
Name VPP API Test Commands History - Commands Used Per Test Case
tc01: dut permits ipv6 pkts with cop whitelist set with ipv6 src-addr No Data

eth2p-ethip6-ip6base-func

IPv6 routing test cases RFC2460 IPv6, RFC4443 ICMPv6, RFC4861 Neighbor Discovery. Encapsulations: Eth-IPv6-ICMPv6 on links TG-DUT1, TG-DUT2, DUT1-DUT2; Eth-IPv6-NS/NA on links TG-DUT. IPv6 routing tests use circular 3-node topology TG - DUT1 - DUT2 - TG with one link between the nodes. DUT1 and DUT2 are configured with IPv6 routing and static routes. Test ICMPv6 Echo Request packets are sent in both directions by TG on links to DUT1 and DUT2 and received on TG links on the other side of circular topology. On receive TG verifies packets IPv6 src-addr, dst-addr and MAC addresses.

Name VPP API Test Commands History - Commands Used Per Test Case
tc01: dut replies to icmpv6 echo req to its ingress interface No Data
tc02: dut replies to icmpv6 echo req pkt with size 64b-to-1500b-incr-1b No Data
tc04: dut routes to its egress interface No Data
tc05: dut1 routes to dut2 ingress interface No Data
tc06: dut1 routes to dut2 egress interface No Data
tc07: dut1 and dut2 route between tg interfaces No Data
tc08: dut replies to ipv6 neighbor solicitation No Data

eth2p-ethip6-ip6base-iaclbase-func

IPv6 routing with ingress ACL test cases Encapsulations: Eth-IPv6 on links TG-DUT1, TG-DUT2, DUT1-DUT2. IPv6 ingress ACL (iACL) tests use 3-node topology TG - DUT1 - DUT2 - TG with one link between the nodes. DUT1 and DUT2 are configured with IPv6 routing and static routes. DUT1 is configured with iACL on link to TG, iACL classification and permit/deny action are configured on a per test case basis. Test ICMPv6 Echo Request packets are sent in one direction by TG on link to DUT1 and received on TG link to DUT2. On receive TG verifies if packets are dropped, or if received verifies packet IPv6 src-addr, dst-addr and MAC addresses.

Name VPP API Test Commands History - Commands Used Per Test Case
tc01: dut with iacl ipv6 src-addr drops matching pkts No Data
tc02: dut with iacl ipv6 dst-addr drops matching pkts No Data
tc03: dut with iacl ipv6 src-addr and dst-addr drops matching pkts No Data
tc04: dut with iacl ipv6 protocol set to tcp drops matching pkts No Data
tc05: dut with iacl ipv6 protocol set to udp drops matching pkts No Data
tc06: dut with iacl ipv6 tcp src-ports drops matching pkts No Data
tc07: dut with iacl ipv6 tcp dst-ports drops matching pkts No Data
tc08: dut with iacl ipv6 tcp src-ports and dst-ports drops matching pkts No Data
tc09: dut with iacl ipv6 udp src-ports drops matching pkts No Data
tc10: dut with iacl ipv6 udp dst-ports drops matching pkts No Data
tc11: dut with iacl ipv6 udp src-ports and dst-ports drops matching pkts No Data
tc12: dut with iacl mac src-addr and iacl ipv6 udp src-ports and dst-ports drops matching pkts No Data

eth2p-ethip6-ip6base-ip6dhcpproxy-func

DHCPv6 proxy test cases

  • [Top] Network Topologies: TG = DUT with two links between the nodes.
  • [Cfg] DUT configuration: DUT is configured with DHCPv6 proxy.
  • [Ver] TG verification: Test DHCPv6 packets are sent on TG on first link to DUT and received on TG on second link. On receive TG verifies if DHCPv6 packets are valid
  • [Ref] Applicable standard specifications: RFC 3315
Name VPP API Test Commands History - Commands Used Per Test Case
tc01: vpp proxies valid dhcpv6 request to dhcpv6 server No Data

eth2p-ethip6-ip6base-ip6ecmp-func

Ipv6 Multipath routing test cases

  • [Top] Network topologies: TG=DUT 2-node topology with two links between nodes.
  • [Cfg] DUT configuration: On DUT configure interfaces IPv4 adresses, and multipath routing.
  • [Ver] TG verification: Test packets are sent from TG on the first link to DUT. Packet is received on TG on the second link from DUT1.
Name VPP API Test Commands History - Commands Used Per Test Case
tc01: ipv6 equal-cost multipath routing No Data

eth2p-ethip6-ip6base-ip6ra-func

IPv6 Router Advertisement test cases RFC4861 Neighbor Discovery. Encapsulations: Eth-IPv6-RA on links TG-DUT1. IPv6 Router Advertisement tests use 3-node topology TG - DUT1 - DUT2 - TG with one link between the nodes. DUT1 and DUT2 are configured with IPv6 routing and static routes. TG verifies received RA packets.

Name VPP API Test Commands History - Commands Used Per Test Case
tc01: dut transmits ra on ipv6 enabled interface No Data
tc02: dut retransmits ra on ipv6 enabled interface after a set interval No Data
tc03: dut responds to router solicitation request No Data
tc04: dut responds to router solicitation request sent from link local address No Data

eth2p-ethip6-ip6base-ipolicemarkbase-func

IPv6 policer test cases

  • [Top] Network topologies: TG=DUT1 2-node topology with two links between nodes.
  • [Cfg] DUT configuration: On DUT1 configure interfaces IPv6 adresses, and static neighbor record on the second interface.
  • [Ver] TG verification: Test packet is sent from TG on the first link to DUT1. Packet is received on TG on the second link from DUT1.
  • [Ref] Applicable standard specifications: RFC2474, RFC2697, RFC2698.
Name VPP API Test Commands History - Commands Used Per Test Case
tc01: vpp policer 2r3c color-aware marks packet No Data
tc02: vpp policer 2r3c color-blind marks packet No Data
tc03: vpp policer 1r3c color-aware marks packet No Data
tc04: vpp policer 1r3c color-blind marks packet No Data

eth2p-ethip6-ip6basevrf-func

Vpn routed forwarding - baseline IPv6

  • [Top] Network Topologies: TG=DUT1=DUT2=TG 3-node topology with two links in between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv6-ICMPv6
  • [Cfg] DUT configuration: Each DUT is configured with two VRF tables; Separation of traffic is tested by IP packets; Neighbors and Routes are set on DUT nodes; IP addresses are set on DUT interfaces.
  • [Ver] TG verification: Test ICMPv6 Echo Request packets are sent by TG on link to DUT1, DUT2 or back to TG; On receipt TG verifies packets for correctness and their IPv6 src-addr, dst-addr, and MAC addresses.
  • [Ref] Applicable standard specifications:
Name VPP API Test Commands History - Commands Used Per Test Case
tc01: tg packets routed to dut ingress interface, vpp configured with two vrfs No Data
tc02: tg packets routed to dut egress interface, vpp configured with two vrfs No Data
tc03: tg packets routed to dut2 ingress interface through dut1, vpp configured with two vrfs No Data
tc04: tg packets routed to dut2 egress interface through dut1, vpp configured with two vrfs No Data
tc05: tg packets routed to tg through dut1 and dut2, vpp configured with two vrfs No Data

ip6 tunnels

lisp

eth2p-ethip6lisp-l2bdbasemaclrn-func

l2-lispgpe-ip6 encapsulation test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IP6-ICMPv6-LISPGpe-IP6
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge domains and neighbors. LISPoIPv6 tunnel is configured between DUT1 and DUT2.
  • [Ver] TG verification: Test ICMPv6 Echo Request packets are sent in both directions by TG on links to DUT1 and DUT2; on receive TG verifies packets for correctness and their IPv6 src-addr, dst-addr and MAC addresses.
  • [Ref] Applicable standard specifications: RFC6830.
Name VPP API Test Commands History - Commands Used Per Test Case
tc01: route ipv6 packet through lisp with bridge domain setup. No Data

eth2p-ethip6lispgpe-ip4base-func

LISP static adjacency test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv6-LISP-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUTn for IPv4 routing over LISPoIPv6 tunnel.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing and static routes. LISPoIPv6 tunnel is configured between DUT1 and DUT2.
  • [Ver] TG verification: Test ICMPv4 Echo Request packets are sent in both directions by TG on links to DUT1 and DUT2; on receive TG verifies packets for correctness and their IPv4 src-addr, dst-addr and MAC addresses.
  • [Ref] Applicable standard specifications: RFC6830.
Name VPP API Test Commands History - Commands Used Per Test Case
tc01: dut1 and dut2 route ipv4 bidirectionally over lispoipv6 tunnel No Data

eth2p-ethip6lispgpe-ip6base-func

ip6-lispgpe-ip6 encapsulation test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv6-LISP-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUTn for IPv6 routing over LISPoIPv6 tunnel.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and static routes. LISPoIPv6 tunnel is configured between DUT1 and DUT2.
  • [Ver] TG verification: Test ICMPv6 Echo Request packets are sent in both directions by TG on links to DUT1 and DUT2; on receive TG verifies packets for correctness and their IPv6 src-addr, dst-addr and MAC addresses.
  • [Ref] Applicable standard specifications: RFC6830.
Name VPP API Test Commands History - Commands Used Per Test Case
tc01: dut1 and dut2 route ipv6 bidirectionally over lisp gpe tunnel using physical interfaces No Data

eth2p-ethip6lispgpe-ip6basevrf-func

ip6-lispgpe-ip6 encapsulation test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv6-LISP-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUTn for IPv6 routing over LISPoIPv6 tunnel.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and static routes. LISPoIPv6 tunnel is configured between DUT1 and DUT2.
  • [Ver] TG verification: Test ICMPv6 Echo Request packets are sent in both directions by TG on links to DUT1 and DUT2; on receive TG verifies packets for correctness and their IPv6 src-addr, dst-addr and MAC addresses.
  • [Ref] Applicable standard specifications: RFC6830.
Name VPP API Test Commands History - Commands Used Per Test Case
tc01: dut1 and dut2 route ipv6 bidirectionally over lisp gpe tunnel using physical interfaces and vrf is enabled No Data

vxlan

eth2p-ethip6vxlan-l2bdbasemaclrn-func

Bridge-domain with VXLAN test cases - IPv6

  • [Top] Network topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet encapsulations: Eth-IPv6-VXLAN-Eth-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUTn for L2 switching of IPv6.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge-domain (L2BD) switching combined with MAC learning enabled; VXLAN tunnels are configured between L2BDs on DUT1 and DUT2.
  • [Ver] TG verification: Test ICMPv6 Echo Request packets are sent in both directions by TG on links to DUT1 and DUT2; on receive TG verifies packets for correctness and their IPv6 src-addr, dst-addr and MAC addresses.
  • [Ref] Applicable standard specifications: RFC7348.
Name VPP API Test Commands History - Commands Used Per Test Case
tc01: dut1 and dut2 with l2bd and vxlanoipv6 tunnels switch icmpv6 between tg links No Data

eth4p-ethip6vxlan-l2bdbasemaclrn-l2shg-func

L2BD with SHG combined with VXLAN test cases - IPv6

  • [Top] Network topologies: TG=DUT1=DUT2=TG 3-node circular topology with double parallel links.
  • [Enc] Packet encapsulations: th-IPv6-VXLAN-Eth-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUTn for L2 switching of IPv6.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge-domain (L2BD) switching combined with MAC learning enabled and Split Horizon Groups (SHG); VXLAN tunnels are configured between L2BDs on DUT1 and DUT2.
  • [Ver] TG verification: Test ICMPv4 Echo Request packets are sent in both directions by TG on links to DUT1 and DUT2; on receive TG verifies packets for correctness and their IPv6 src-addr, dst-addr and MAC addresses.
  • [Ref] Applicable standard specifications: RFC7348.
Name VPP API Test Commands History - Commands Used Per Test Case
tc01: dut1 and dut2 with l2bd and vxlanoipv6 tunnels in shg switch icmpv6 between tg links No Data
tc02: dut1 and dut2 with l2bd and vxlanoipv6 tunnels in different shgs switch icmpv6 between tg links No Data

l2bd

eth2p-dot1ad–dot1q-l2bdbasemaclrn-vlantrans21-func

L2BD with VLAN tag rewrite test cases - transalte-2-1

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet encapsulations: Eth-dot1ad-IPv4-ICMPv4 or Eth-dot1ad-IPv6-ICMPv6 on TG-DUT1, Eth-dot1q-IPv4-ICMPv4 or Eth-dot1q-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv4-ICMPv4 or Eth-IPv6-ICMPv6 on TG-DUT2 for L2 switching of IPv4/IPv6.
  • [Cfg] DUT configuration: DUT1 is configured with bridge domain (L2BD) switching combined with MAC learning enabled and added VLAN sub-interface with VLAN tag rewrite translate-2-1 method of interface towards TG and interface towards DUT2. DUT2 is configured with L2 bridge domain (L2BD) switching between VLAN sub-interface with VLAN tag rewrite pop-1 method of interface towards DUT1 and interface towards TG.
  • [Ver] TG verification: Test ICMPv4 Echo Request packets are sent from TG on link to DUT1 and received in TG on link form DUT2; on receive TG verifies packets for correctness and their IPv4 src-addr, dst-addr and MAC addresses.
  • [Ref] Applicable standard specifications: IEEE 802.1q, IEEE 802.1ad.
Name VPP API Test Commands History - Commands Used Per Test Case
tc01: dut1 and dut2 with l2bd and vlan translate-2-1 (dut1) switch icmpv4 between two tg links No Data
tc03: dut1 and dut2 with l2bd and vlan translate-2-1 (dut1) switch icmpv6 between two tg links No Data

eth2p-dot1ad-l2bdbasemaclrn-vlantrans22-func

L2BD with VLAN tag rewrite test cases - translate-2-2

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet encapsulations: Eth-dot1ad-IPv4-ICMPv4 or Eth-dot1ad-IPv6-ICMPv6 on TG-DUT1 and DUT1-DUT2, Eth-IPv4-ICMPv4 or Eth-IPv6-ICMPv6 on TG-DUT2 for L2 switching of IPv4/IPv6.
  • [Cfg] DUT configuration: DUT1 is configured with bridge domain (L2BD) switching combined with MAC learning enabled and added VLAN sub-interface with VLAN tag rewrite translate-2-2 method of interface towards TG and interface towards DUT2. DUT2 is configured with L2 bridge domain (L2BD) switching between VLAN sub-interface with VLAN tag rewrite pop-2 method of interface towards DUT1 and interface towards TG.
  • [Ver] TG verification: Test ICMPv4 Echo Request packets are sent from TG on link to DUT1 and received in TG on link form DUT2; on receive TG verifies packets for correctness and their IPv4 src-addr, dst-addr and MAC addresses.
  • [Ref] Applicable standard specifications: IEEE 802.1q, IEEE 802.1ad.
Name VPP API Test Commands History - Commands Used Per Test Case
tc01: dut1 and dut2 with l2bd and vlan translate-2-2 switch icmpv4 between two tg links No Data
tc05: dut1 and dut2 with l2bd and vlan translate-2-2 switch icmpv6 between two tg links No Data

eth2p-dot1q–dot1ad-l2bdbasemaclrn-vlantrans12-func

L2BD with VLAN tag rewrite test cases - translate-1-2

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet encapsulations: Eth-dot1q-IPv4-ICMPv4 or Eth-dot1q-IPv6-ICMPv6 on TG-DUT1, Eth-dot1ad-IPv4-ICMPv4 or Eth-dot1ad-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv4-ICMPv4 or Eth-IPv6-ICMPv6 on TG-DUT2 for L2 switching of IPv4/IPv6.
  • [Cfg] DUT configuration: DUT1 is configured with bridge domain (L2BD) switching combined with MAC learning enabled and added VLAN sub-interface with VLAN tag rewrite translate-1-2 method of interface towards TG and interface towards DUT2. DUT2 is configured with L2 bridge domain (L2BD) switching between VLAN sub-interface with VLAN tag rewrite pop-2 method of interface towards DUT1 and interface towards TG.
  • [Ver] TG verification: Test ICMPv4 Echo Request packets are sent from TG on link to DUT1 and received in TG on link form DUT2; on receive TG verifies packets for correctness and their IPv4 src-addr, dst-addr and MAC addresses.
  • [Ref] Applicable standard specifications: IEEE 802.1q, IEEE 802.1ad.
Name VPP API Test Commands History - Commands Used Per Test Case
tc01: dut1 and dut2 with l2bd and vlan translate-1-2 (dut1) switch icmpv4 between two tg links No Data
tc05: dut1 and dut2 with l2bd and vlan translate-1-2 (dut1) switch icmpv6 between two tg links No Data

eth2p-dot1q-l2bdbasemaclrn-vlantrans11-func

L2BD with VLAN tag rewrite test cases - translate-1-1

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet encapsulations: Eth-dot1q-IPv4-ICMPv4 or Eth-dot1q-IPv6-ICMPv6 on TG-DUT1 and DUT1-DUT2, Eth-IPv4-ICMPv4 or Eth-IPv6-ICMPv6 on TG-DUT2 for L2 switching of IPv4/IPv6.
  • [Cfg] DUT configuration: DUT1 is configured with bridge domain (L2BD) switching combined with MAC learning enabled and added VLAN sub-interface with VLAN tag rewrite translate-1-1 method of interface towards TG and interface towards DUT2. DUT2 is configured with L2 bridge domain (L2BD) switching between VLAN sub-interface with VLAN tag rewrite pop-1 method of interface towards DUT1 and interface towards TG.
  • [Ver] TG verification: Test ICMPv4 Echo Request packets are sent from TG on link to DUT1 and received in TG on link form DUT2; on receive TG verifies packets for correctness and their IPv4 src-addr, dst-addr and MAC addresses.
  • [Ref] Applicable standard specifications: IEEE 802.1q, IEEE 802.1ad.
Name VPP API Test Commands History - Commands Used Per Test Case
tc01: dut1 and dut2 with l2bd and vlan translate-1-1 (dut1) switch icmpv4 between two tg links No Data
tc03: dut1 and dut2 with l2bd and vlan translate-1-1 (dut1) switch icmpv6 between two tg links No Data

eth2p-eth-l2bdbasemaclrn-func

L2 bridge-domain test cases

  • [Top] Network Topologies: TG=DUT1 2-node topology with two links between nodes; TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4-ICMPv4 for L2 switching of IPv4; Eth-IPv6-ICMPv6 for L2 switching of IPv6 use. Both apply to all links.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge-domain (L2BD) switching combined with MAC learning enabled.
  • [Ver] TG verification: Test ICMPv4 (or ICMPv6) Echo Request packets are sent in both directions by TG on links to DUT1 and DUT2; on receive TG verifies packets for correctness and their IPv4 (IPv6) src-addr, dst-addr and MAC addresses.
  • [Ref] Applicable standard specifications:
Name VPP API Test Commands History - Commands Used Per Test Case
tc01: dut reports active interfaces No Data
tc02: dut with l2bd (mac learning) switch icmpv4 between two tg links No Data
tc03: dut1 and dut2 with l2bd (mac learning) switch between two tg links No Data

eth2p-eth-l2bdbasemacstc-func

L2 bridge-domain test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4-ICMPv4 for L2 switching of IPv4; Eth-IPv6-ICMPv6 for L2 switching of IPv6 use. Both apply to all links.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge-domain (L2BD) switching combined with static MACs.
  • [Ver] TG verification: Test ICMPv4 (or ICMPv6) Echo Request packets are sent in both directions by TG on links to DUT1 and DUT2; on receive TG verifies packets for correctness and their IPv4 (IPv6) src-addr, dst-addr and MAC addresses.
  • [Ref] Applicable standard specifications:
Name VPP API Test Commands History - Commands Used Per Test Case
tc01: dut1 and dut2 with l2bd (static macs) switch between two tg links No Data

eth4p-eth-l2bdbasemaclrn-l2shg-func

L2 bridge-domain test cases

  • [Top] Network Topologies: TG=DUT1=DUT2=TG 3-node circular topology with double parallel links.
  • [Enc] Packet Encapsulations: Eth-IPv4-ICMPv4 for L2 switching of IPv4; Eth-IPv6-ICMPv6 for L2 switching of IPv6 use. Both apply to all links.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge-domain (L2BD) switching combined with MAC learning enabled and Split Horizon Groups (SHG).
  • [Ver] TG verification: Test ICMPv4 (or ICMPv6) Echo Request packets are sent in both directions by TG on links to DUT1 and DUT2; on receive TG verifies packets for correctness and their IPv4 (IPv6) src-addr, dst-addr and MAC addresses.
  • [Ref] Applicable standard specifications:
Name VPP API Test Commands History - Commands Used Per Test Case
tc01: dut1 and dut2 with l2bd (mac learn) and shg switch between four tg links No Data

l2xc

eth2p-dot1ad–dot1q-l2xcbase-vlantrans21-func

L2XC with VLAN tag rewrite test cases - translate-2-1

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet encapsulations: Eth-dot1ad-IPv4-ICMPv4 or Eth-dot1ad-IPv6-ICMPv6 on TG-DUT1, Eth-dot1q-IPv4-ICMPv4 or Eth-dot1aq-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2 for L2 switching of IPv4/IPv6.
  • [Cfg] DUT configuration: DUT1 is configured with L2 cross-connect (L2XC) switching between VLAN sub-interface with VLAN tag rewrite translate-2-1 method of interface towards TG and interface towards DUT2. DUT2 is configured configured with L2 cross-connect (L2XC) switching between VLAN sub-interface with VLAN tag rewrite pop-1 method of interface towards DUT1 and interface towards TG.
  • [Ver] TG verification: Test ICMPv4 Echo Request packets are sent from TG on link to DUT1 and received in TG on link form DUT2; on receive TG verifies packets for correctness and their IPv4 src-addr, dst-addr and MAC addresses.
  • [Ref] Applicable standard specifications: IEEE 802.1q, IEEE 802.1ad.
Name VPP API Test Commands History - Commands Used Per Test Case
tc01: dut1 and dut2 with l2xc and vlan translate-2-1 (dut1) switch icmpv4 between two tg links No Data
tc03: dut1 and dut2 with l2xc and vlan translate-2-1 (dut1) switch icmpv6 between two tg links No Data

eth2p-dot1ad-l2xcbase-func

L2 cross-connect with QinQ test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet encapsulations: Eth-dot1ad-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUTn for L2 switching of IPv4.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 cross-connect (L2XC) switching with 802.1ad QinQ VLAN tag push and pop.
  • [Ver] TG verification: Test ICMPv4 Echo Request packets are sent in both directions by TG on links to DUT1 and DUT2; on receive TG verifies packets for correctness and their IPv4 src-addr, dst-addr and MAC addresses.
  • [Ref] Applicable standard specifications: IEEE 802.1ad.
Name VPP API Test Commands History - Commands Used Per Test Case
tc01: dut1 and dut2 with l2xc and two vlan push-pop switch icmpv4 between two tg links No Data

eth2p-dot1ad-l2xcbase-vlantrans22-func

L2XC with VLAN tag rewrite test cases - translate-2-2

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet encapsulations: Eth-dot1ad-IPv4-ICMPv4 or Eth-dot1ad-IPv6-ICMPv6 on TG-DUT1 and DUT1-DUT2, Eth-IPv4-ICMPv4 or Eth-IPv6-ICMPv6 on TG-DUT2 for L2 switching of IPv4/IPv6.
  • [Cfg] DUT configuration: DUT1 is configured with L2 cross-connect (L2XC) switching between VLAN sub-interface with VLAN tag rewrite translate-2-2 method of interface towards TG and interface towards DUT2. DUT2 is configured configured with L2 cross-connect (L2XC) switching between VLAN sub-interface with VLAN tag rewrite pop-2 method of interface towards DUT1 and interface towards TG.
  • [Ver] TG verification: Test ICMPv4 Echo Request packets are sent from TG on link to DUT1 and received in TG on link form DUT2; on receive TG verifies packets for correctness and their IPv4 src-addr, dst-addr and MAC addresses.
  • [Ref] Applicable standard specifications: IEEE 802.1q, IEEE 802.1ad.
Name VPP API Test Commands History - Commands Used Per Test Case
tc01: dut1 and dut2 with l2xc and vlan translate-2-2 switch icmpv4 between two tg links No Data
tc05: dut1 and dut2 with l2xc and vlan translate-2-2 switch icmpv6 between two tg links No Data

eth2p-dot1q–dot1ad-l2xcbase-vlantrans12-func

L2XC with VLAN tag rewrite test cases - translate-1-2

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet encapsulations: Eth-dot1q-IPv4-ICMPv4 or Eth-dot1q-IPv6-ICMPv6 on TG-DUT1, Eth-dot1ad-IPv4-ICMPv4 or Eth-dot1ad-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv4-ICMPv4 or Eth-IPv6-ICMPv6 on TG-DUT2 for L2 switching of IPv4/IPv6.
  • [Cfg] DUT configuration: DUT1 is configured with L2 cross-connect (L2XC) switching between VLAN sub-interface with VLAN tag rewrite translate-1-2 method of interface towards TG and interface towards DUT2. DUT2 is configured configured with L2 cross-connect (L2XC) switching between VLAN sub-interface with VLAN tag rewrite pop-2 method of interface towards DUT1 and interface towards TG.
  • [Ver] TG verification: Test ICMPv4 Echo Request packets are sent from TG on link to DUT1 and received in TG on link form DUT2; on receive TG verifies packets for correctness and their IPv4 src-addr, dst-addr and MAC addresses.
  • [Ref] Applicable standard specifications: IEEE 802.1q, IEEE 802.1ad.
Name VPP API Test Commands History - Commands Used Per Test Case
tc01: dut1 and dut2 with l2xc and vlan translate-1-2 (dut1) switch icmpv4 between two tg links No Data
tc05: dut1 and dut2 with l2xc and vlan translate-1-2 (dut1) switch icmpv6 between two tg links No Data

eth2p-dot1q-l2xcbase-vlantrans11-func

L2XC with VLAN tag rewrite test cases - translate-1-1

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet encapsulations: Eth-dot1q-IPv4-ICMPv4 or Eth-dot1q-IPv6-ICMPv6 on TG-DUT1 and DUT1-DUT2, Eth-IPv4-ICMPv4 or Eth-IPv4-ICMPv4 on TG-DUT2 for L2 switching of IPv4/IPv6.
  • [Cfg] DUT configuration: DUT1 is configured with L2 cross-connect (L2XC) switching between VLAN sub-interface with VLAN tag rewrite translate-1-1 method of interface towards TG and interface towards DUT2. DUT2 is configured configured with L2 cross-connect (L2XC) switching between VLAN sub-interface with VLAN tag rewrite pop-1 method of interface towards DUT1 and interface towards TG.
  • [Ver] TG verification: Test ICMPv4 Echo Request packets are sent from TG on link to DUT1 and received in TG on link form DUT2; on receive TG verifies packets for correctness and their IPv4 src-addr, dst-addr and MAC addresses.
  • [Ref] Applicable standard specifications: IEEE 802.1q, IEEE 802.1ad.
Name VPP API Test Commands History - Commands Used Per Test Case
tc01: dut1 and dut2 with l2xc and vlan translate-1-1 (dut1) switch icmpv4 between two tg links No Data
tc03: dut1 and dut2 with l2xc and vlan translate-1-1 (dut1) switch icmpv6 between two tg links No Data

eth2p-eth-l2xcbase-func

L2 cross-connect test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4-ICMPv4 for L2 switching of IPv4; Eth-IPv6-ICMPv6 for L2 switching of IPv6 use. Both apply to all links.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 cross-connect (L2XC) switching.
  • [Ver] TG verification: Test ICMPv4 (or ICMPv6) Echo Request packets are sent in both directions by TG on links to DUT1 and DUT2; on receive TG verifies packets for correctness and their IPv4 (IPv6) src-addr, dst-addr and MAC addresses.
  • [Ref] Applicable standard specifications:
Name VPP API Test Commands History - Commands Used Per Test Case
tc01: dut1 and dut2 with l2xc switch icmpv4 between two tg links No Data
tc02: dut1 and dut2 with l2xc switch icmpv6 between two tg links No Data

eth2p-eth-l2xcbase-iaclbase-func

Ingress ACL test cases

  • [Top] Network Topologies: TG - DUT1 - DUT2 - TG with one link between the nodes.
  • [Cfg] DUT configuration: DUT2 is configured with L2 Cross connect. DUT1 is configured with iACL classification on link to TG,
  • [Ver] TG verification: Test ICMPv4 Echo Request packets are sent in one direction by TG on link to DUT1 and received on TG link to DUT2. On receive TG verifies if packets are dropped.
Name VPP API Test Commands History - Commands Used Per Test Case
tc01: dut with iacl mac src-addr drops matching pkts No Data
tc02: dut with iacl mac dst-addr drops matching pkts No Data
tc03: dut with iacl mac src-addr and dst-addr drops matching pkts No Data
tc04: dut with iacl ethertype drops matching pkts No Data

telemetry

eth2p-ethip4-ip4base-ip4ipfixbase-func

IPFIX ipv4 test cases IPFIX tests use 3-node topology TG - DUT1 - DUT2 - TG with one link between the nodes. DUT1 is configured with IPv4 routing and static routes. IPFIX is configured on DUT1 with DUT1->TG interface as collector. Test packets are sent from TG to DUT1. TG listens for flow report packets and verifies that they contains flow record of test packets sent.

Name VPP API Test Commands History - Commands Used Per Test Case
tc01: dut sends ipfix template and data packets No Data
tc02: dut reports packet flow for traffic by source address No Data
tc03: dut reports packet flow for traffic with local destination address No Data
tc04: dut reports packet flow for traffic with remote destination address No Data
tc05: dut reports packet flow for traffic by source and destination port No Data

eth2p-ethip4-ip4base-ip4ipfixscale-func

IPFIX ipv4 test cases IPFIX tests use 3-node topology TG - DUT1 - DUT2 - TG with one link between the nodes. DUT1 is configured with IPv4 routing and static routes. IPFIX is configured on DUT1 with DUT1->TG interface as collector. Test packets are sent from TG to DUT1. TG listens for flow report packets and verifies that they contains flow record of test packets sent.

Name VPP API Test Commands History - Commands Used Per Test Case
tc01: dut reports packet flow with a large number of packets No Data
tc02: dut reports packet flow when multiple sessions are configured No Data

eth2p-ethip4-ip4base-spanrx-func

SPAN test suite

  • [Top] Network Topologies: TG=DUT1 2-node topology with two links between nodes.
  • [Cfg] DUT configuration: DUT1 is configured with SPAN mirroring from the first DUT1-TG interface to the second one.
  • [Ver] TG verification: Test ARP or ICMP packets are sent by TG on first link to DUT1; On receipt through second link TG verifies the copy of packet sent and the copy of DUT’s reply packet.
  • [Ref] Applicable standard specifications: None?
Name VPP API Test Commands History - Commands Used Per Test Case
tc01: dut mirrors l2 packets from one interface to another No Data
tc02: dut mirrors ipv4 packets from one interface to another No Data

eth2p-ethip6-ip6base-ip6ipfixbase-func

IPFIX ipv6 test cases IPFIX tests use 3-node topology TG - DUT1 - DUT2 - TG with one link between the nodes. DUT1 is configured with IPv4 and IPV6 routing and static routes. IPFIX is configured on DUT1 with DUT1->TG interface as collector.Test packets are sent from TG to or through DUT1. TG listens for flow report packets and verifies that they contains flow records of test packets sent.

Name VPP API Test Commands History - Commands Used Per Test Case
tc01: dut reports packet flow for traffic by source address No Data
tc02: dut reports packet flow for traffic with local destination address No Data
tc03: dut reports packet flow for traffic with remote destination address No Data
tc04: dut reports packet flow for traffic by source and destination port No Data

eth2p-ethip6-ip6base-ip6ipfixscale-func

IPFIX ipv6 test cases IPFIX tests use 3-node topology TG - DUT1 - DUT2 - TG with one link between the nodes. DUT1 is configured with IPv4 and IPV6 routing and static routes. IPFIX is configured on DUT1 with DUT1->TG interface as collector.Test packets are sent from TG to or through DUT1. TG listens for flow report packets and verifies that they contains flow records of test packets sent.

Name VPP API Test Commands History - Commands Used Per Test Case
tc01: dut reports packet flow with a large number of packets No Data
tc02: dut reports packet flow when multiple sessions are configured No Data

eth2p-ethip6-ip6base-spanrx-func

SPAN test suite

  • [Top] Network Topologies: TG=DUT1 2-node topology with two links between nodes.
  • [Cfg] DUT configuration: DUT1 is configured with SPAN mirroring from the first DUT1-TG interface to the second one.
  • [Ver] TG verification: Test ARP or ICMP packets are sent by TG on first link to DUT1; On receipt through second link TG verifies the copy of packet sent and the copy of DUT’s reply packet.
  • [Ref] Applicable standard specifications: None?
Name VPP API Test Commands History - Commands Used Per Test Case
tc01: dut mirrors ipv6 packets from one interface to another No Data

vm vhost

ip4

eth2p-ethip4-ip4base-eth-2vhost-1vm

eth2p-ethip4-ip4base-eth-2vhost-1vm

IPv4 routing test cases with vhost user interface RFC791 IPv4, RFC826 ARP, RFC792 ICMPv4. Encapsulations: Eth-IPv4-ICMPv4 on links TG=DUT1. IPv4 routing tests use circular 2-node topology TG - DUT1 - TG with two link between the nodes. DUT is configured with IPv4 routing and static routes. Test sends packets by TG on links to DUT and received on TG link on the other side of circular topology. On receive TG verifies packets IPv4 src-addr, dst-addr and MAC addresses.

Name VPP API Test Commands History - Commands Used Per Test Case
tc01: ipv4 forward via vhost to another vrf No Data

eth2p-ethip4ipsectptlispgpe-ip4base-eth-2vhost-1vm-func

IPv4-ip4-ipsec-lispgpe-ip4 - main fib, vrf (gpe_vni-to-vrf)

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: ICMPv4-IPv4-IPSec-LISPGPE-IPv4-ICMPv4.
  • [Cfg] DUT configuration: Each DUT is configured with LISP and IPsec. IPsec is in transport mode. Tests cases are for IPsec configured both on RLOC interface or lisp_gpe0 interface.
  • [Ver] TG verification: Packet is send from TG(if1) across the DUT1 via VM to DUT2 where it is forwarded to TG(if2).
  • [Ref] Applicable standard specifications: RFC6830, RFC4303.
Name VPP API Test Commands History - Commands Used Per Test Case
tc01: dut1 and dut2 route ipv4 over vhost to lisp gpe tunnel using ipsec (transport) on rloc int. No Data
tc02: dut1 and dut2 route ipv4 over vhost to lisp gpe tunnel using ipsec (transport) on lisp_gpe0 int. No Data

eth2p-ethip4ipsectptlispgpe-ip6base-eth-2vhost-1vm-func

IPv6 - ip4-ipsec-lispgpe-ip6 - main fib, vrf, virt2lisp, phy2lisp

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4-LISPGPE-IPSec-IPv6-ICMP, Eth-IPv4-IPSec-LISPGPE-IPv6-ICMP
  • [Cfg] DUT configuration: Each DUT is configured with LISP and IPsec. IPsec is in transport mode. Tests cases are for IPsec configured both on RLOC interface or lisp_gpe0 interface.
  • [Ver] TG verification: Packet is send from TG(if1) across the DUT1 via VM to DUT2 where it is forwarded to TG(if2).
  • [Ref] Applicable standard specifications: RFC6830, RFC4303.
Name VPP API Test Commands History - Commands Used Per Test Case
tc01: dut1 and dut2 route ipv6 over vhost to lisp gpe tunnel using ipsec (transport) on rloc int. No Data
tc02: dut1 and dut2 route ipv6 over vhost to lisp gpe tunnel using ipsec (transport) on lisp_gpe0 int. No Data

eth2p-ethip4lispgpe-ip4base-eth-2vhost-1vm-func

ip4-lispgpe-ip4 encapsulation test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4-LISP-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUTn for IPv4 routing over LISPoIPv4 tunnel.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing and static routes. LISPoIPv4 tunnel is configured between DUT1 and DUT2.
  • [Ver] TG verification: Test ICMPv4 Echo Request packets are sent in both directions by TG on links to DUT1 and DUT2; on receive TG verifies packets for correctness and their IPv4 src-addr, dst-addr and MAC addresses.
  • [Ref] Applicable standard specifications: RFC6830.
Name VPP API Test Commands History - Commands Used Per Test Case
tc01: dut1 and dut2 route ipv4 bidirectionally over lisp gpe tunnel using vhost interfaces No Data

eth2p-ethip4lispgpe-ip4basevrf-eth-2vhost-1vm-func

ip4-lispgpe-ip4 encapsulation test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4-LISP-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUTn for IPv4 routing over LISPoIPv4 tunnel.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing and static routes. LISPoIPv4 tunnel is configured between DUT1 and DUT2.
  • [Ver] TG verification: Test ICMPv4 Echo Request packets are sent in both directions by TG on links to DUT1 and DUT2; on receive TG verifies packets for correctness and their IPv4 src-addr, dst-addr and MAC addresses.
  • [Ref] Applicable standard specifications: RFC6830.
Name VPP API Test Commands History - Commands Used Per Test Case
tc01: dut1 and dut2 route ipv4 bidirectionally over lisp gpe tunnel using vhost interfaces and vrf is enabled No Data

eth2p-ethip4lispgpe-ip6base-eth-2vhost-1vm-func

LISP static adjacency test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4-LISP-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUTn for IPv6 routing over LISPoIPv4 tunnel.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and static routes. LISPoIPv4 tunnel is configured between DUT1 and DUT2.
  • [Ver] TG verification: Test ICMPv6 Echo Request packets are sent in both directions by TG on links to DUT1 and DUT2; on receive TG verifies packets for correctness and their IPv6 src-addr, dst-addr and MAC addresses.
  • [Ref] Applicable standard specifications: RFC6830.
Name VPP API Test Commands History - Commands Used Per Test Case
tc01: dut1 and dut2 route ipv6 bidirectionally over lisp gpe tunnel using vhost interfaces No Data

ip6

eth2p-ethip6ipsectptlispgpe-ip4base-eth-2vhost-1vm-func

IPv6 - ip4-ipsec-lispgpe-ip6 - main fib, virt2lisp, phy2lisp

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv6-LISPGPE-IPSec-IPv4-ICMP, Eth-IPv6-IPSec-LISPGPE-IPv4-ICMP
  • [Cfg] DUT configuration: Each DUT is configured with LISP and IPsec. IPsec is in transport mode. Test cases are for IPsec configured both on RLOC interface or lisp_gpe0 interface.
  • [Ver] TG verification: Packet is send from TG(if1) across the DUT1 to DUT2 where it is forwarded to TG(if2).
  • [Ref] Applicable standard specifications: RFC6830, RFC4303.
Name VPP API Test Commands History - Commands Used Per Test Case
tc01: dut1 and dut2 route ipv4 over vhost to lisp gpe tunnel using ipsec (transport) on rloc int. No Data
tc02: dut1 and dut2 route ipv4 over vhost to lisp gpe tunnel using ipsec (transport) on lisp_gpe0 int. No Data

eth2p-ethip6ipsectptlispgpe-ip6base-eth-2vhost-1vm-func

IPv6 - ip6-ipsec-lispgpe-ip6 - main fib, vrf (gpe_vni-to-vrf), phy2lisp, virt2lisp

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv6-IPSec-LISPGPE-IPv6-ICMPv6,
  • [Cfg] DUT configuration: Each DUT is configured with LISP and IPsec. IPsec is in transport mode. Tests cases are for IPsec configured both on RLOC interface or lisp_gpe0 interface.
  • [Ver] TG verification: Packet is send from TG(if1) across the DUT1 via VM to DUT2 where it is forwarded to TG(if2).
  • [Ref] Applicable standard specifications: RFC6830, RFC4303.
Name VPP API Test Commands History - Commands Used Per Test Case
tc01: dut1 and dut2 route ipv6 over vhost to lisp gpe tunnel using ipsec (transport) on rloc int. No Data
tc02: dut1 and dut2 route ipv6 over vhost to lisp gpe tunnel using ipsec (transport) on lisp_gpe0 int. No Data

eth2p-ethip6lispgpe-ip6base-eth-2vhost-1vm-func

ip6-lispgpe-ip6 encapsulation test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv6-LISP-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUTn for IPv6 routing over LISPoIPv6 tunnel.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and static routes. LISPoIPv6 tunnel is configured between DUT1 and DUT2.
  • [Ver] TG verification: Test ICMPv6 Echo Request packets are sent in both directions by TG on links to DUT1 and DUT2; on receive TG verifies packets for correctness and their IPv6 src-addr, dst-addr and MAC addresses.
  • [Ref] Applicable standard specifications: RFC6830.
Name VPP API Test Commands History - Commands Used Per Test Case
tc01: dut1 and dut2 route ipv6 bidirectionally over lisp gpe tunnel using vhost interfaces No Data

eth2p-ethip6lispgpe-ip6basevrf-eth-2vhost-1vm-func

ip6-lispgpe-ip6 encapsulation test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv6-LISP-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUTn for IPv6 routing over LISPoIPv6 tunnel.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and static routes. LISPoIPv6 tunnel is configured between DUT1 and DUT2.
  • [Ver] TG verification: Test ICMPv6 Echo Request packets are sent in both directions by TG on links to DUT1 and DUT2; on receive TG verifies packets for correctness and their IPv6 src-addr, dst-addr and MAC addresses.
  • [Ref] Applicable standard specifications: RFC6830.
Name VPP API Test Commands History - Commands Used Per Test Case
tc01: dut1 and dut2 route ipv6 bidirectionally over lisp gpe tunnel using vhost interfaces and vrf is enabled No Data

l2bd

eth2p-dot1q-l2bdbasemaclrn-eth-2vhost-1vm-func

L2 bridge domain with VLAN tag over VM test cases

  • [Top] Network Topologies: TG=DUT 2-node circular topology with double links between nodes.
  • [Enc] Packet encapsulations: Eth-dot1q-IPv4-ICMPv4 or Eth-dot1q-IPv6-ICMPv6 on TG=DUT and on DUT=VM.
  • [Cfg] DUT configuration: DUT is configured with two bridge domains (L2BD) with MAC learning enabled; each one with added VLAN sub-interface towards TG and vhost-user interface to local VM. Configure linux bridge on VM to pass traffic between both vhost-user interfaces.
  • [Ver] TG verification: Make TG send ICMPv4/ICMPv6 Echo Req between two of its interfaces to be switched by DUT via VM; verify packets are switched between these TG interfaces; on receive TG verifies packets for correctness and their IPv4 src-addr, dst-addr, MAC addresses and VLAN tag.
  • [Ref] Applicable standard specifications: IEEE 802.1q.
Name VPP API Test Commands History - Commands Used Per Test Case
tc01: eth2p-dot1q-l2bdbasemaclrn-eth-2vhost-1vm - ipv4 No Data
tc01: eth2p-dot1q-l2bdbasemaclrn-eth-2vhost-1vm - ipv6 No Data

eth2p-eth-l2bdbasemaclrn-eth-2vhost-1vm-func

L2 bridge-domain test cases

  • [Top] Network Topologies: TG=DUT=VM 3-node topology with VM and double parallel links.
  • [Enc] Packet Encapsulations: Eth-IPv4-ICMPv4 for L2 switching of IPv4; Eth-IPv6-ICMPv6 for L2 switching of IPv6 use. Both apply to all links.
  • [Cfg] DUT configuration: DUT1 is configured with two L2 bridge-domains (L2BD) switching combined with MAC learning enabled.
  • [Ver] TG verification: Test ICMPv4 (or ICMPv6) Echo Request packets are sent in both directions by TG on links to DUT1 via VM; on receive TG verifies packets for correctness and their IPv4 (IPv6) src-addr, dst-addr and MAC addresses.
  • [Ref] Applicable standard specifications:
Name VPP API Test Commands History - Commands Used Per Test Case
tc01: dut with two l2bds (mac learn) switches icmpv4 between tg and vm links No Data
tc02: dut with two l2bds (mac learn) switches icmpv6 between tg and vm links No Data

eth2p-eth-l2bdbasemacstc-eth-2vhost-1vm-func

L2 bridge-domain test cases

  • [Top] Network Topologies: TG=DUT=VM 3-node topology with VM and double parallel links.
  • [Enc] Packet Encapsulations: Eth-IPv4-ICMPv4 for L2 switching of IPv4; Eth-IPv6-ICMPv6 for L2 switching of IPv6 use. Both apply to all links.
  • [Cfg] DUT configuration: DUT1 is configured with two L2 bridge-domains (L2BD) switching combined with static MACs.
  • [Ver] TG verification: Test ICMPv4 (or ICMPv6) Echo Request packets are sent in both directions by TG on links to DUT1 via VM; on receive TG verifies packets for correctness and their IPv4 (IPv6) src-addr, dst-addr and MAC addresses.
  • [Ref] Applicable standard specifications:
Name VPP API Test Commands History - Commands Used Per Test Case
tc01: dut with two l2bds (static macs) switches icmpv4 between tg and vm links No Data
tc02: dut with two l2bds (static macs) switches icmpv6 between tg and vm links No Data

eth2p-ethip4-l2bdbase-vhost-client-reconnect-2vm-func

Vhost-User Interface Traffic Tests

  • [Top] Network Topologies: TG=DUT1 2-node topology with two links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4-VXLAN-ETH-IP on TG-DUT link. ETH-IP on VirtualEthernet-VM interface.
  • [Cfg] DUT configuration: On DUT is running 2 VM with 2 vhost-user interface on each VM. DUT is configured with VXLAN and vhost-user interfaces in bridge-domain (L2BD).
  • [Cfg] VM configuration: VM has both vhost-user interfaces added into Linux Bridge.
  • [Ver] TG verification: VXLAN packet is send to DUT where is decapsulated and send bridged to vhost-user inteface. VM forwards frame to its second interface and VPP encapsulates it to another VXLAN tunnel. Packets are sent and received by TG on link to DUT.
Name VPP API Test Commands History - Commands Used Per Test Case
tc01: qemu reconnects to vpps vhost-user when qemu is killed and restarted No Data
tc02: vpp reconnects to qemu vhost-user when restart vpp and reconfigured No Data

eth2p-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-func

L2BD with VM combined with VXLAN test cases - IPv4

  • [Top] Network topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet encapsulations: Eth-IPv4-VXLAN-Eth-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUTn for L2 switching of IPv4.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge-domain (L2BD) switching combined with MAC learning enabled; VXLAN tunnels are configured between L2BDs on DUT1 and DUT2.
  • [Ver] TG verification: Test ICMPv4 Echo Request packets are sent in both directions by TG on links to DUT1 and DUT2; on receive TG verifies packets for correctness and their IPv4 src-addr, dst-addr and MAC addresses.
  • [Ref] Applicable standard specifications: RFC7348.
Name VPP API Test Commands History - Commands Used Per Test Case
tc01:dut1 and dut2 with two l2bds and vxlanoipv4 tunnel switch icmpv4 between tg links and vm links No Data

eth2p-ethip6vxlan-l2bdbasemaclrn-eth-2vhost-1vm-func

L2BD with VM combined with VXLAN test cases - IPv6

  • [Top] Network topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet encapsulations: Eth-IPv6-VXLAN-Eth-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUTn for L2 switching of IPv6.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge-domain (L2BD) switching combined with MAC learning enabled; VXLAN tunnels are configured between L2BDs on DUT1 and DUT2.
  • [Ver] TG verification: Test ICMPv6 Echo Request packets are sent in both directions by TG on links to DUT1 and DUT2; on receive TG verifies packets for correctness and their IPv6 src-addr, dst-addr and MAC addresses.
  • [Ref] Applicable standard specifications: RFC7348.
Name VPP API Test Commands History - Commands Used Per Test Case
tc01:dut1 and dut2 with two l2bds and vxlanoipv6 tunnel switch icmpv6 between tg links and vm links No Data

l2xc

eth2p-eth-l2xcbase-eth-2vhost-1vm-func

L2 cross-connect test cases

  • [Top] Network Topologies: TG=DUT=VM 3-node topology with VM and double parallel links.
  • [Enc] Packet Encapsulations: Eth-IPv4-ICMPv4 for L2 switching of IPv4; Eth-IPv6-ICMPv6 for L2 switching of IPv6 use. Both apply to all links.
  • [Cfg] DUT configuration: DUT1 is configured with L2 cross-connect (L2XC) switching.
  • [Ver] TG verification: Test ICMPv4 (or ICMPv6) Echo Request packets are sent in both directions by TG on links to DUT1 via VM; on receive TG verifies packets for correctness and their IPv4 (IPv6) src-addr, dst-addr and MAC addresses.
  • [Ref] Applicable standard specifications:
Name VPP API Test Commands History - Commands Used Per Test Case
tc01: dut with two l2xcs switches icmpv4 between tg and local vm links No Data
tc02: dut with two l2xcs switches icmpv6 between tg and local vm links No Data