3n-icx-xxv710

25ge2p1xxv710-avf-ethip6lispip4-ip6base-ndrpdr

RFC6830: Pkt throughput Lisp test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular opology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv6-LISP-IPv4 on DUT1-DUT2, Eth-IPv6 on TG-DUTn for IPv6 routing over LISPoIPv4 tunnel.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6

outing and static routes. LISPoIPv4 tunnel is configured between DUT1 and DUT2. DUT1 and DUT2 tested with Intel-XXV710.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library.

  • [Ref] Applicable standard specifications: RFC6830.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 1518b-2t1c-avf- 
 ethip6lispip4-ip6base-ndrpdr 

 1.  3.86      49.00 
 2.  3.86      49.00 
  
 3.   78  183  296        98  171  264  
 4.   78  152  181        59   94  116  
 5.   85  127  138        95  117  129  

 1518b-4t2c-avf- 
 ethip6lispip4-ip6base-ndrpdr 

 1.  3.86      49.00 
 2.  3.86      49.00 
  
 3.   75  163  250        85  146  242  
 4.   42   66   73        51   95  108  
 5.   61   81   93        69   91  101  

 imix-2t1c-avf- 
 ethip6lispip4-ip6base-ndrpdr 

 1.  6.81      22.99 
 2.  6.85      23.10 

 imix-4t2c-avf- 
 ethip6lispip4-ip6base-ndrpdr 

 1.  7.63      25.76 
 2.  7.71      26.02 

 imix-8t4c-avf- 
 ethip6lispip4-ip6base-ndrpdr 

 1.  8.08      27.25 
 2.  8.16      27.53

25ge2p1xxv710-avf-ethip6lispip6-ip6base-ndrpdr

RFC6830: Pkt throughput Lisp test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular opology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv6-LISP-IPv6 on DUT1-DUT2, Eth-IPv6 on TG-DUTn for IPv6 routing over LISPoIPv6 tunnel.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6

outing and static routes. LISPoIPv6 tunnel is configured between DUT1 and DUT2. DUT1 and DUT2 tested with Intel-XXV710.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library.

  • [Ref] Applicable standard specifications: RFC6830.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 1518b-2t1c-avf- 
 ethip6lispip6-ip6base-ndrpdr 

 1.  3.57      44.16 
 2.  3.61      44.60 
  
 3.   88  173  266        91  179  261  
 4.  100  153  217       109  175  234  
 5.  173  221  246       156  213  230  

 1518b-4t2c-avf- 
 ethip6lispip6-ip6base-ndrpdr 

 1.  3.90      48.29 
 2.  3.92      48.53 
  
 3.   97  172  278        70  163  257  
 4.   54   98  123        54   98  119  
 5.  121  158  187       109  143  169  

 imix-2t1c-avf- 
 ethip6lispip6-ip6base-ndrpdr 

 1.  4.61      14.07 
 2.  4.65      14.21 

 imix-4t2c-avf- 
 ethip6lispip6-ip6base-ndrpdr 

 1.  5.15      15.73 
 2.  5.20      15.89 

 imix-8t4c-avf- 
 ethip6lispip6-ip6base-ndrpdr 

 1.  5.52      16.87 
 2.  5.55      16.96

25ge2p1xxv710-ethip6lispip4-ip6base-ndrpdr

RFC6830: Pkt throughput Lisp test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular opology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv6-LISP-IPv4 on DUT1-DUT2, Eth-IPv6 on TG-DUTn for IPv6 routing over LISPoIPv4 tunnel.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6

outing and static routes. LISPoIPv4 tunnel is configured between DUT1 and DUT2. DUT1 and DUT2 tested with Intel-XXV710.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library.

  • [Ref] Applicable standard specifications: RFC6830.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 1518b-2t1c- 
 ethip6lispip4-ip6base-ndrpdr 

 1.  3.86      49.00 
 2.  3.86      49.00 
  
 3.   20   33   52        19   32   53  
 4.   49   76   94        48   86   95  
 5.   66   87   98        76  113  129  

 1518b-4t2c- 
 ethip6lispip4-ip6base-ndrpdr 

 1.  3.86      49.00 
 2.  3.86      49.00 
  
 3.   22   50   78        20   60   98  
 4.   44   62   74        45   67   83  
 5.   70   98  110        74  108  121  

 imix-2t1c- 
 ethip6lispip4-ip6base-ndrpdr 

 1.  5.49      18.52 
 2.  5.52      18.62 

 imix-4t2c- 
 ethip6lispip4-ip6base-ndrpdr 

 1.  6.25      21.08 
 2.  6.31      21.29 

 imix-8t4c- 
 ethip6lispip4-ip6base-ndrpdr 

 1.  6.72      22.67 
 2.  6.79      22.90

25ge2p1xxv710-ethip6lispip6-ip6base-ndrpdr

RFC6830: Pkt throughput Lisp test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular opology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv6-LISP-IPv6 on DUT1-DUT2, Eth-IPv6 on TG-DUTn for IPv6 routing over LISPoIPv6 tunnel.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6

outing and static routes. LISPoIPv6 tunnel is configured between DUT1 and DUT2. DUT1 and DUT2 tested with Intel-XXV710.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library.

  • [Ref] Applicable standard specifications: RFC6830.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 1518b-2t1c- 
 ethip6lispip6-ip6base-ndrpdr 

 1.  3.16      39.05 
 2.  3.19      39.44 
  
 3.   20   52   79        20   45   79  
 4.   56   92   99        33  117  131  
 5.  153  208  231       158  215  278  

 1518b-4t2c- 
 ethip6lispip6-ip6base-ndrpdr 

 1.  3.59      44.38 
 2.  3.62      44.83 
  
 3.   21   48   73        31   61   76  
 4.   46   66   85        48   65   74  
 5.  112  161  189       123  162  180  

 imix-2t1c- 
 ethip6lispip6-ip6base-ndrpdr 

 1.  3.95      12.06 
 2.  3.99      12.18 

 imix-4t2c- 
 ethip6lispip6-ip6base-ndrpdr 

 1.  4.46      13.62 
 2.  4.50      13.76 

 imix-8t4c- 
 ethip6lispip6-ip6base-ndrpdr 

 1.  4.79      14.64 
 2.  4.84      14.79