3n-alt-xl710

40ge2p1xl710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr

RFC2544: Pkt throughput L2BD test cases with vhost

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular opology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge-domain and MAC learning enabled. Qemu VNFs are connected to VPP via vhost-user interfaces. Guest is running testpmd interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is ested with Intel-XL710.

  • [Ver] TG vefication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 64b-1t1c-eth-l2bdbasemaclrn- 
 eth-2vhostvr1024-1vm-mrr 

 [3.16, 3.16, 3.16, 3.17, 3.17, 3.16, 3.16, 3.16, 3.16, 3.16] 

 64b-2t2c-eth-l2bdbasemaclrn- 
 eth-2vhostvr1024-1vm-mrr 

 [1.32, 1.32, 1.32, 1.32, 1.32, 1.31, 1.32, 1.32, 1.32, 1.32] 

 64b-4t4c-eth-l2bdbasemaclrn- 
 eth-2vhostvr1024-1vm-mrr 

 [2.59, 2.60, 2.59, 2.59, 2.59, 2.60, 2.59, 2.60, 2.60, 2.60]

40ge2p1xl710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-mrr

RFC2544: Pkt throughput L2BD test cases with vhost

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular opology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge-domain and MAC learning enabled. Qemu VNFs are connected to VPP via vhost-user interfaces. Guest is running VPP l2xc interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is ested with Intel-XL710.

  • [Ver] TG vefication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 64b-1t1c-eth-l2bdbasemaclrn- 
 eth-2vhostvr1024-1vm-vppl2xc-mrr 

 [4.35, 4.37, 4.34, 4.38, 4.36, 4.32, 4.35, 4.36, 4.33, 4.34] 

 64b-2t2c-eth-l2bdbasemaclrn- 
 eth-2vhostvr1024-1vm-vppl2xc-mrr 

 [2.45, 2.46, 2.44, 2.44, 2.43, 2.42, 2.42, 2.42, 2.40, 2.41] 

 64b-4t4c-eth-l2bdbasemaclrn- 
 eth-2vhostvr1024-1vm-vppl2xc-mrr 

 [4.78, 4.77, 4.78, 4.77, 4.72, 4.72, 4.71, 4.70, 4.69, 4.68]

40ge2p1xl710-ethip4-ip4base-eth-2vhostvr1024-1vm-mrr

RFC2544: Pkt throughput IPv4 test cases with vhost

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular opology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4.

outing and two static IPv4 /24 route entries. Qemu VNFs are connected to VPP via vhost-user interfaces. Guest is running testpmd interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is ested with Intel-XL710.

  • [Ver] TG vefication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 64b-1t1c-ethip4-ip4base- 
 eth-2vhostvr1024-1vm-mrr 

 [0.66, 0.66, 0.66, 0.66, 0.66, 0.66, 0.66, 0.66, 0.66, 0.66] 

 64b-2t2c-ethip4-ip4base- 
 eth-2vhostvr1024-1vm-mrr 

 [1.27, 1.28, 1.27, 1.28, 1.27, 1.27, 1.28, 1.28, 1.27, 1.28] 

 64b-4t4c-ethip4-ip4base- 
 eth-2vhostvr1024-1vm-mrr 

 [2.50, 2.50, 2.50, 2.50, 2.50, 2.50, 2.49, 2.50, 2.50, 2.49]

40ge2p1xl710-ethip4-ip4base-eth-2vhostvr1024-1vm-vppip4-mrr

RFC2544: Pkt throughput IPv4 test cases with vhost

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular opology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4.

outing and two static IPv4 /24 route entries. Qemu VNFs are connected to VPP via vhost-user interfaces. Guest is running VPP ip4 interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is ested with Intel-XL710.

  • [Ver] TG vefication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 64b-1t1c-ethip4-ip4base- 
 eth-2vhostvr1024-1vm-vppip4-mrr 

 [1.23, 1.22, 1.21, 1.21, 1.21, 1.20, 1.20, 1.20, 1.19, 1.19] 

 64b-2t2c-ethip4-ip4base- 
 eth-2vhostvr1024-1vm-vppip4-mrr 

 [1.86, 1.85, 1.87, 1.87, 1.87, 1.88, 1.88, 1.88, 1.88, 1.88] 

 64b-4t4c-ethip4-ip4base- 
 eth-2vhostvr1024-1vm-vppip4-mrr 

 [4.54, 4.55, 4.54, 4.52, 4.50, 4.48, 4.47, 4.46, 4.46, 4.43]