ip6 tunnels

lisp

2n1l-10ge2p1x710-ethip6lispgpe-ip4base-scapy

2n1l-10ge2p1x710-ethip6lispgpe-ip4base-scapy

ip6-lispgpe-ip4 encapsulation test cases

  • [Top] Network Topologies: TG-DUT1-TG 2-node circular with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv6-LISPGPE-IPv4-ICMPv4 on DUT1-TG, Eth-IPv4-ICMPv4 on TG-DUTn for IPv6 routing over LISPoIPv6 tunnel.

  • [Cfg] DUT configuration: DUT1 and TG(if2) are configured with IPv6 routing and static routes. LISPoIPv6 tunnel is configured between DUT1 and TG.

  • [Ver] TG verification: Test ICMPv4 Echo Request packets are sent in TG->DUT(if1); On receive TG(if2) verifies packets for correctness and their IPv4 src-addr, dst-addr and MAC addresses.

  • [Ref] Applicable standard specifications: RFC6830.

 Test Name 

 Status 

 78b-0c- 
ethip6lispgpe-ip4base-scapy

PASS

2n1l-10ge2p1x710-ethip6lispgpe-ip6base-scapy

2n1l-10ge2p1x710-ethip6lispgpe-ip6base-scapy

ip6-lispgpe-ip6 encapsulation test cases

  • [Top] Network Topologies: TG-DUT1-TG 2-node circular with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv6-LISPGPE-IPv6-ICMPv6 on DUT1-TG, Eth-IPv6-ICMPv6 on TG-DUTn for IPv6 routing over LISPoIPv6 tunnel.

  • [Cfg] DUT configuration: DUT1 and TG(if2) are configured with IPv6 routing and static routes. LISPoIPv6 tunnel is configured between DUT1 and TG.

  • [Ver] TG verification: Test ICMPv6 Echo Request packets are sent in TG->DUT(if1); On receive TG(if2) verifies packets for correctness and their IPv6 src-addr, dst-addr and MAC addresses.

  • [Ref] Applicable standard specifications: RFC6830.

 Test Name 

 Status 

 78b-0c- 
ethip6lispgpe-ip6base-scapy

PASS