ip6

1n1l-50ge1p1ena-ethip6-ip6base-tg-ndrpdr

RFC2544: Pkt throughput for cross connected NICs with IPv6 raffic profile.

  • [Top] Network Topologies: TG-TG 1-node circular topology with single link between.

  • [Enc] Packet Encapsulations: Eth-IPv6 for L1 cross connect patch.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library.

Test packets are generated by TG on links to TG. TG traffic profile contains two L3 flow-groups (flow-group per direction, 1M flows per flow-group) with all packets containing Ethernet header, IPv6 header with static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
1. Mpps Gbps (NDR)
2. Mpps Gbps (PDR)

One-Way Latency Percentiles in uSec at %PDR load,
one set per each direction:
3. P50 P90 P99 P50 P90 P99 (10% PDR)
4. P50 P90 P99 P50 P90 P99 (50% PDR)
5. P50 P90 P99 P50 P90 P99 (90% PDR)

 78b–ethip6-ip6base-tg-ndrpdr 

 1.  0.39       0.30 
2. 1.54 1.21

3. 12 25 81 12 21 70
4. 12 57 183 12 31 192
5. 18 130 273 12 56 166

 1518b–ethip6- 
ip6base-tg-ndrpdr

 1.  0.97      11.94 
2. 1.24 15.27

3. 14 25 127 14 23 85
4. 14 42 254 14 26 156
5. 16 118 346 15 52 172

 9000b–ethip6- 
ip6base-tg-ndrpdr

 1.  0.28      20.00 
2. 0.28 20.00

3. 19 32 64 19 32 65
4. 19 40 118 18 34 87
5. 19 48 268 19 41 135

 imix–ethip6-ip6base-tg-ndrpdr 

 1.  1.08       3.23 
2. 1.52 4.55

1n1l-50ge1p1ena-ethip6-ip6scale2m-tg-ndrpdr

RFC2544: Pkt throughput for cross connected NICs with IPv6 raffic profile.

  • [Top] Network Topologies: TG-TG 1-node circular topology with single link between.

  • [Enc] Packet Encapsulations: Eth-IPv6 for L1 cross connect patch.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library.

Test packets are generated by TG on links to TG. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv6 header with static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
1. Mpps Gbps (NDR)
2. Mpps Gbps (PDR)

One-Way Latency Percentiles in uSec at %PDR load,
one set per each direction:
3. P50 P90 P99 P50 P90 P99 (10% PDR)
4. P50 P90 P99 P50 P90 P99 (50% PDR)
5. P50 P90 P99 P50 P90 P99 (90% PDR)

 78b–ethip6- 
ip6scale2m-tg-ndrpdr

 1.  0.67       0.53 
2. 0.69 0.54

3. 15 26 243 14 25 217
4. 14 83 544 15 39 309
5. 19 185 698 15 35 313

 1518b–ethip6- 
ip6scale2m-tg-ndrpdr

 1.  0.63       7.79 
2. 0.65 7.99

3. 16 27 302 15 30 243
4. 17 73 506 16 33 390
5. 18 148 923 17 38 428

 9000b–ethip6- 
ip6scale2m-tg-ndrpdr

 1.  0.28      20.00 
2. 0.28 20.00

3. 21 41 296 21 39 241
4. 21 49 427 22 42 314
5. 22 84 455 21 46 341

 imix–ethip6- 
ip6scale2m-tg-ndrpdr

 1.  0.37       1.09 
2. 0.67 1.99