6.9. l2bd¶
6.9.1. 2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-iacl1sf-scapy suite¶
L2BD test cases with ACL
[Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv4 on all links.
[Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. Required ACL rules are applied to input paths of both DUT1 intefaces.
[Ver] TG verification: Test IPv4 packets are sent in one direction by TG on link to DUT1; on receive TG verifies packets for correctness and drops as applicable.
[Ref] Applicable standard specifications:
*** Settings ***
| Resource | resources/libraries/robot/shared/default.robot
|
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | ACL | ACL_STATEFUL
| ... | IACL | ACL1 | DRV_VFIO_PCI
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip4-l2bdbasemaclrn-iacl1sf
|
| Suite Setup | Setup suite topology interfaces | scapy
| Test Setup | Setup test
| Test Teardown | Tear down test | packet_trace | telemetry | acl
|
| Test Template | Local Template
|
| *** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
| ${nic_rxq_size}= | 0
| ${nic_txq_size}= | 0
| ${nic_pfs}= | 2
| ${nic_vfs}= | 0
| ${overhead}= | ${0}
# ACL test setup
| ${acl_action}= | permit+reflect
| ${acl_apply_type}= | input
| ${no_hit_aces_number}= | 1
# starting points for non-hitting ACLs
| ${src_ip_start}= | 30.30.30.1
| ${dst_ip_start}= | 40.40.40.1
| ${ip_step}= | ${1}
| ${sport_start}= | ${1000}
| ${dport_start}= | ${1000}
| ${port_step}= | ${1}
| ${trex_stream1_subnet}= | 10.10.10.0/24
| ${trex_stream2_subnet}= | 20.20.20.0/24
# Telemetry
| ${telemetry_profile}= | vppctl_test_teardown6.9.1.1. Local Template¶
[Cfg] DUT runs L2BD config with ACLs.
[Ver] Make TG send IPv4 packet in one direction between two of its interfaces to be switched by DUT to and from docker. Make TG verify IPv4 packet is correct.
Arguments: - frame_size - Framesize in Bytes in integer. Type: integer - phy_cores - Number of physical cores. Type: integer - rxq - Number of RX queues, default value: ${None}. Type: integer
Set Test Variable \${frame_size}
Given Set Max Rate And Jumbo
And Add worker threads to all DUTs ${phy_cores} ${rxq}
And Pre-initialize layer driver ${nic_driver}
And Apply Startup configuration on all VPP DUTs with_trace=${True}
When Initialize layer driver ${nic_driver}
And Initialize layer interface
And Initialize L2 bridge domain with IPv4 ACLs in circular topology
Then Send packet and verify headers ${tg} 10.10.10.2 20.20.20.2 ${TG_pf1}[0] ${TG_pf1_mac}[0] ${TG_pf2_mac}[0] ${TG_pf2}[0] ${TG_pf1_mac}[0] ${TG_pf2_mac}[0]
6.9.1.2. 64B-0c-ethip4-l2bdbasemaclrn-iacl1sf-scapy¶
frame_size=${64} phy_cores=${0}
6.9.2. 2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-iacl1sl-scapy suite¶
L2BD test cases with ACL
[Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv4 on all links.
[Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled.Required ACL rules are applied to input paths of both DUT1 intefaces.
[Ver] TG verification: Test IPv4 packets are sent in one direction by TG on link to DUT1; on receive TG verifies packets for correctness and drops as applicable.
[Ref] Applicable standard specifications:
*** Settings ***
| Resource | resources/libraries/robot/shared/default.robot
|
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | ACL | ACL_STATELESS
| ... | IACL | ACL1 | DRV_VFIO_PCI
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip4-l2bdbasemaclrn-iacl1sl
|
| Suite Setup | Setup suite topology interfaces | scapy
| Test Setup | Setup test
| Test Teardown | Tear down test | packet_trace | telemetry | acl
|
| Test Template | Local Template
|
| *** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
| ${nic_rxq_size}= | 0
| ${nic_txq_size}= | 0
| ${nic_pfs}= | 2
| ${nic_vfs}= | 0
| ${overhead}= | ${0}
# ACL test setup
| ${acl_action}= | permit
| ${acl_apply_type}= | input
| ${no_hit_aces_number}= | 1
# starting points for non-hitting ACLs
| ${src_ip_start}= | 30.30.30.1
| ${dst_ip_start}= | 40.40.40.1
| ${ip_step}= | ${1}
| ${sport_start}= | ${1000}
| ${dport_start}= | ${1000}
| ${port_step}= | ${1}
| ${trex_stream1_subnet}= | 10.10.10.0/24
| ${trex_stream2_subnet}= | 20.20.20.0/24
# Telemetry
| ${telemetry_profile}= | vppctl_test_teardown6.9.2.1. Local Template¶
[Cfg] DUT runs L2BD config with ACLs.
[Ver] Make TG send IPv4 packet in one direction between two of its interfaces to be switched by DUT to and from docker. Make TG verify IPv4 packet is correct.
Arguments: - frame_size - Framesize in Bytes in integer. Type: integer - phy_cores - Number of physical cores. Type: integer - rxq - Number of RX queues, default value: ${None}. Type: integer
Set Test Variable \${frame_size}
Given Set Max Rate And Jumbo
And Add worker threads to all DUTs ${phy_cores} ${rxq}
And Pre-initialize layer driver ${nic_driver}
And Apply Startup configuration on all VPP DUTs with_trace=${True}
When Initialize layer driver ${nic_driver}
And Initialize layer interface
And Initialize L2 bridge domain with IPv4 ACLs in circular topology
Then Send packet and verify headers ${tg} 10.10.10.2 20.20.20.2 ${TG_pf1}[0] ${TG_pf1_mac}[0] ${TG_pf2_mac}[0] ${TG_pf2}[0] ${TG_pf1_mac}[0] ${TG_pf2_mac}[0]
6.9.2.2. 64B-0c-ethip4-l2bdbasemaclrn-iacl1sl-scapy¶
frame_size=${64} phy_cores=${0}
6.9.3. 2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-macip-iacl1sl-scapy suite¶
L2BD test cases with ACL
[Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv4 on all links.
[Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. Required ACL rules are applied to input paths of both DUT1 intefaces.
[Ver] TG verification: Test IPv4 packets are sent in one direction by TG on link to DUT1; on receive TG verifies packets for correctness and drops as applicable.
[Ref] Applicable standard specifications:
*** Settings ***
| Resource | resources/libraries/robot/shared/default.robot
|
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | MACIP | ACL_STATELESS
| ... | IACL | ACL1 | DRV_VFIO_PCI
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip4-l2bdbasemaclrn-macip-iacl1sl
|
| Suite Setup | Setup suite topology interfaces | scapy
| Test Setup | Setup test
| Test Teardown | Tear down test | packet_trace | telemetry | macipacl
|
| Test Template | Local Template
|
| *** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
| ${nic_rxq_size}= | 0
| ${nic_txq_size}= | 0
| ${nic_pfs}= | 2
| ${nic_vfs}= | 0
| ${overhead}= | ${0}
# ACL test setup
| ${acl_action}= | permit
| ${no_hit_aces_number}= | 1
# starting points for non-hitting ACLs
| ${src_ip_start}= | 30.30.30.1
| ${ip_step}= | ${1}
| ${src_mac_start}= | 01:02:03:04:05:06
| ${src_mac_step}= | ${1000}
| ${src_mac_mask}= | 00:00:00:00:00:00
| ${tg_stream1_mac}= | ca:fe:00:00:00:00
| ${tg_stream2_mac}= | fa:ce:00:00:00:00
| ${tg_mac_mask}= | ff:ff:ff:ff:c0:00
| ${tg_stream1_subnet}= | 10.0.0.0/18
| ${tg_stream2_subnet}= | 20.0.0.0/18
# Telemetry
| ${telemetry_profile}= | vppctl_test_teardown6.9.3.1. Local Template¶
[Cfg] DUT runs L2BD config with ACLs.
[Ver] Make TG send IPv4 packet in one direction between two of its interfaces to be switched by DUT to and from docker. Make TG verify IPv4 packet is correct.
Arguments: - frame_size - Framesize in Bytes in integer. Type: integer - phy_cores - Number of physical cores. Type: integer - rxq - Number of RX queues, default value: ${None}. Type: integer
Set Test Variable \${frame_size}
Given Set Max Rate And Jumbo
And Add worker threads to all DUTs ${phy_cores} ${rxq}
And Pre-initialize layer driver ${nic_driver}
And Apply Startup configuration on all VPP DUTs with_trace=${True}
When Initialize layer driver ${nic_driver}
And Initialize layer interface
And Initialize L2 bridge domain with MACIP ACLs in circular topology
Then Send packet and verify headers ${tg} 10.0.0.2 20.0.0.2 ${TG_pf1}[0] ${tg_stream1_mac} ${tg_stream2_mac} ${TG_pf2}[0] ${tg_stream1_mac} ${tg_stream2_mac}
6.9.3.2. 64B-0c-ethip4-l2bdbasemaclrn-macip-iacl1sl-scapy¶
frame_size=${64} phy_cores=${0}
6.9.4. 2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-oacl1sf-scapy suite¶
L2BD test cases with ACL
[Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv4 on all links.
[Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled.Required ACL rules are applied to input paths of both DUT1 intefaces.
[Ver] TG verification: Test IPv4 packets are sent in one direction by TG on link to DUT1; on receive TG verifies packets for correctness and drops as applicable.
[Ref] Applicable standard specifications:
*** Settings ***
| Resource | resources/libraries/robot/shared/default.robot
|
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | ACL | ACL_STATEFUL
| ... | OACL | ACL1 | DRV_VFIO_PCI
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip4-l2bdbasemaclrn-oacl1sf
|
| Suite Setup | Setup suite topology interfaces | scapy
| Test Setup | Setup test
| Test Teardown | Tear down test | packet_trace | telemetry | acl
|
| Test Template | Local Template
|
| *** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
| ${nic_rxq_size}= | 0
| ${nic_txq_size}= | 0
| ${nic_pfs}= | 2
| ${nic_vfs}= | 0
| ${overhead}= | ${0}
# ACL test setup
| ${acl_action}= | permit+reflect
| ${acl_apply_type}= | output
| ${no_hit_aces_number}= | 1
# starting points for non-hitting ACLs
| ${src_ip_start}= | 30.30.30.1
| ${dst_ip_start}= | 40.40.40.1
| ${ip_step}= | ${1}
| ${sport_start}= | ${1000}
| ${dport_start}= | ${1000}
| ${port_step}= | ${1}
| ${trex_stream1_subnet}= | 10.10.10.0/24
| ${trex_stream2_subnet}= | 20.20.20.0/24
# Telemetry
| ${telemetry_profile}= | vppctl_test_teardown6.9.4.1. Local Template¶
[Cfg] DUT runs L2BD config with ACLs.
[Ver] Make TG send IPv4 packet in one direction between two of its interfaces to be switched by DUT to and from docker. Make TG verify IPv4 packet is correct.
Arguments: - frame_size - Framesize in Bytes in integer. Type: integer - phy_cores - Number of physical cores. Type: integer - rxq - Number of RX queues, default value: ${None}. Type: integer
Set Test Variable \${frame_size}
Given Set Max Rate And Jumbo
And Add worker threads to all DUTs ${phy_cores} ${rxq}
And Pre-initialize layer driver ${nic_driver}
And Apply Startup configuration on all VPP DUTs with_trace=${True}
When Initialize layer driver ${nic_driver}
And Initialize layer interface
And Initialize L2 bridge domain with IPv4 ACLs in circular topology
Then Send packet and verify headers ${tg} 10.10.10.2 20.20.20.2 ${TG_pf1}[0] ${TG_pf1_mac}[0] ${TG_pf2_mac}[0] ${TG_pf2}[0] ${TG_pf1_mac}[0] ${TG_pf2_mac}[0]
6.9.4.2. 64B-0c-ethip4-l2bdbasemaclrn-oacl1sf-scapy¶
frame_size=${64} phy_cores=${0}
6.9.5. 2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-oacl1sl-scapy suite¶
L2BD test cases with ACL
[Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv4 on all links.
[Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled.Required ACL rules are applied to input paths of both DUT1 intefaces.
[Ver] TG verification: Test IPv4 packets are sent in one direction by TG on link to DUT1; on receive TG verifies packets for correctness and drops as applicable.
[Ref] Applicable standard specifications:
*** Settings ***
| Resource | resources/libraries/robot/shared/default.robot
|
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | ACL | ACL_STATELESS
| ... | OACL | ACL1 | DRV_VFIO_PCI
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip4-l2bdbasemaclrn-oacl1sl
|
| Suite Setup | Setup suite topology interfaces | scapy
| Test Setup | Setup test
| Test Teardown | Tear down test | packet_trace | telemetry | acl
|
| Test Template | Local Template
|
| *** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | acl_plugin.so
| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
| ${nic_rxq_size}= | 0
| ${nic_txq_size}= | 0
| ${nic_pfs}= | 2
| ${nic_vfs}= | 0
| ${overhead}= | ${0}
# ACL test setup
| ${acl_action}= | permit
| ${acl_apply_type}= | output
| ${no_hit_aces_number}= | 1
# starting points for non-hitting ACLs
| ${src_ip_start}= | 30.30.30.1
| ${dst_ip_start}= | 40.40.40.1
| ${ip_step}= | ${1}
| ${sport_start}= | ${1000}
| ${dport_start}= | ${1000}
| ${port_step}= | ${1}
| ${trex_stream1_subnet}= | 10.10.10.0/24
| ${trex_stream2_subnet}= | 20.20.20.0/24
# Telemetry
| ${telemetry_profile}= | vppctl_test_teardown6.9.5.1. Local Template¶
[Cfg] DUT runs L2BD config with ACLs.
[Ver] Make TG send IPv4 packet in one direction between two of its interfaces to be switched by DUT to and from docker. Make TG verify IPv4 packet is correct.
Arguments: - frame_size - Framesize in Bytes in integer. Type: integer - phy_cores - Number of physical cores. Type: integer - rxq - Number of RX queues, default value: ${None}. Type: integer
Set Test Variable \${frame_size}
Given Set Max Rate And Jumbo
And Add worker threads to all DUTs ${phy_cores} ${rxq}
And Pre-initialize layer driver ${nic_driver}
And Apply Startup configuration on all VPP DUTs with_trace=${True}
When Initialize layer driver ${nic_driver}
And Initialize layer interface
And Initialize L2 bridge domain with IPv4 ACLs in circular topology
Then Send packet and verify headers ${tg} 10.10.10.2 20.20.20.2 ${TG_pf1}[0] ${TG_pf1_mac}[0] ${TG_pf2_mac}[0] ${TG_pf2}[0] ${TG_pf1_mac}[0] ${TG_pf2_mac}[0]
6.9.5.2. 64B-0c-ethip4-l2bdbasemaclrn-oacl1sl-scapy¶
frame_size=${64} phy_cores=${0}
6.9.6. 2n1l-10ge2p1x710-ethip4-l2bdbasemaclrn-scapy suite¶
L2 bridge-domain test cases
[Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4. Both apply to all links.
[Cfg] DUT configuration: DUT1 is configured with L2 cross-connect switching.
[Ver] TG verification: Test IPv4 packets with IP protocol=61 are sent in both directions by TG on links to DUT1; on receive TG. verifies packets for correctness and their IPv4 src-addr, dst-addr and MAC addresses.
[Ref] Applicable standard specifications: RFC792
*** Settings ***
| Resource | resources/libraries/robot/shared/default.robot
|
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | DRV_VFIO_PCI
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip4-l2bdbasemaclrn
|
| Suite Setup | Setup suite topology interfaces | scapy
| Test Setup | Setup test
| Test Teardown | Tear down test | packet_trace | telemetry
|
| Test Template | Local Template
|
| *** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
| ${nic_rxq_size}= | 0
| ${nic_txq_size}= | 0
| ${nic_pfs}= | 2
| ${nic_vfs}= | 0
| ${overhead}= | ${0}
# Telemetry
| ${telemetry_profile}= | vppctl_test_teardown6.9.6.1. Local Template¶
[Ver] Make TG send IPv4 packets in both directions between two of its interfaces to be switched by DUT to and from docker; verify all packets are received.
Arguments: - frame_size - Framesize in Bytes in integer. Type: integer - phy_cores - Number of physical cores. Type: integer - rxq - Number of RX queues, default value: ${None}. Type: integer
Set Test Variable \${frame_size}
Given Set Max Rate And Jumbo
And Add worker threads to all DUTs ${phy_cores} ${rxq}
And Pre-initialize layer driver ${nic_driver}
And Apply startup configuration on all VPP DUTs with_trace=${True}
When Initialize layer driver ${nic_driver}
And Initialize layer interface
And Initialize L2 bridge domain
Then Send IPv4 bidirectionally and verify received packets ${tg} ${TG_pf1}[0] ${TG_pf2}[0]
6.9.6.2. 64B-0c-ethip4-l2bdbasemaclrn-scapy¶
frame_size=${64} phy_cores=${0}