6.8.1. lisp¶
6.8.1.1. 2n1l-10ge2p1x710-ethip6lispgpe-ip4base-scapy suite¶
ip6-lispgpe-ip4 encapsulation test cases
[Top] Network Topologies: TG-DUT1-TG 2-node circular with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv6-LISPGPE-IPv4-ICMPv4 on DUT1-TG, Eth-IPv4-ICMPv4 on TG-DUTn for IPv6 routing over LISPoIPv6 tunnel.
[Cfg] DUT configuration: DUT1 and TG(if2) are configured with IPv6 routing and static routes. LISPoIPv6 tunnel is configured between DUT1 and TG.
[Ver] TG verification: Test ICMPv4 Echo Request packets are sent in TG->DUT(if1); On receive TG(if2) verifies packets for correctness and their IPv4 src-addr, dst-addr and MAC addresses.
[Ref] Applicable standard specifications: RFC6830.
*** Settings ***
| Resource | resources/libraries/robot/shared/default.robot
|
| Variables | resources/test_data/lisp/lisp.py
|
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
| ... | NIC_Intel-X710 | IP6FWD | LISP | LISPGPE_IP4o6 | DRV_VFIO_PCI
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip6lispgpe-ip4base
|
| Suite Setup | Setup suite topology interfaces | scapy
| Test Setup | Setup test
| Test Teardown | Tear down test | packet_trace | telemetry
|
| Test Template | Local Template
|
| *** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | lisp_plugin.so
| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
| ${nic_rxq_size}= | 0
| ${nic_txq_size}= | 0
| ${nic_pfs}= | 2
| ${nic_vfs}= | 0
| ${overhead}= | ${54}
| ${ot_mode}= | 4to6
| ${is_gpe}= | ${1}
# Telemetry
| ${telemetry_profile}= | vppctl_test_teardown6.8.1.1.1. Local Template¶
[Cfg] On DUT1 configure LISP. Arguments:
frame_size - Framesize in Bytes in integer. Type: integer
phy_cores - Number of physical cores. Type: integer
rxq - Number of RX queues, default value: ${None}. Type: integer
Set Test Variable \${frame_size}
Given Set Max Rate And Jumbo
And Add worker threads to all DUTs ${phy_cores} ${rxq}
And Pre-initialize layer driver ${nic_driver}
And Apply startup configuration on all VPP DUTs with_trace=${True}
When Initialize layer driver ${nic_driver}
And Initialize layer interface
And Configure topology for IPv4 LISPoIP6 testing
And Vpp Interfaces RA Suppress On All Nodes ${nodes}
And Configure LISP in 2-node circular topology ${dut1} ${DUT1_${int}2}[0] ${NONE} ${duts_locator_set} ${dut1_ip4o6_eid} ${dut1_ip4o6_static_adjacency} ${is_gpe}
Then Send packet and verify LISPoTunnel encap ${tg} ${tg_if1_ip4} ${dst_ip4} ${TG_pf1}[0] ${TG_pf1_mac}[0] ${DUT1_vf1_mac}[0] ${TG_pf2}[0] ${DUT1_vf2_mac}[0] ${TG_pf2_mac}[0] ${src_rloc6} ${dst_rloc6} ${ot_mode}
6.8.1.1.2. 78B-0c-ethip6lispgpe-ip4base-scapy¶
frame_size=${78} phy_cores=${0}
6.8.1.2. 2n1l-10ge2p1x710-ethip6lispgpe-ip6base-scapy suite¶
ip6-lispgpe-ip6 encapsulation test cases
[Top] Network Topologies: TG-DUT1-TG 2-node circular with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv6-LISPGPE-IPv6-ICMPv6 on DUT1-TG, Eth-IPv6-ICMPv6 on TG-DUTn for IPv6 routing over LISPoIPv6 tunnel.
[Cfg] DUT configuration: DUT1 and TG(if2) are configured with IPv6 routing and static routes. LISPoIPv6 tunnel is configured between DUT1 and TG.
[Ver] TG verification: Test ICMPv6 Echo Request packets are sent in TG->DUT(if1); On receive TG(if2) verifies packets for correctness and their IPv6 src-addr, dst-addr and MAC addresses.
[Ref] Applicable standard specifications: RFC6830.
*** Settings ***
| Resource | resources/libraries/robot/shared/default.robot
|
| Variables | resources/test_data/lisp/lisp.py
|
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
| ... | NIC_Intel-X710 | IP6FWD | LISP | LISPGPE_IP6o6 | DRV_VFIO_PCI
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip6lispgpe-ip6base
|
| Suite Setup | Setup suite topology interfaces | scapy
| Test Setup | Setup test
| Test Teardown | Tear down test | packet_trace | telemetry
|
| Test Template | Local Template
|
| *** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | lisp_plugin.so
| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
| ${nic_rxq_size}= | 0
| ${nic_txq_size}= | 0
| ${nic_pfs}= | 2
| ${nic_vfs}= | 0
| ${overhead}= | ${54}
| ${is_gpe}= | ${1}
# Telemetry
| ${telemetry_profile}= | vppctl_test_teardown6.8.1.2.1. Local Template¶
[Cfg] On DUT1 configure LISP.
Arguments: - frame_size - Framesize in Bytes in integer. Type: integer - phy_cores - Number of physical cores. Type: integer - rxq - Number of RX queues, default value: ${None}. Type: integer
Set Test Variable \${frame_size}
Given Set Max Rate And Jumbo
And Add worker threads to all DUTs ${phy_cores} ${rxq}
And Pre-initialize layer driver ${nic_driver}
And Apply startup configuration on all VPP DUTs with_trace=${True}
When Initialize layer driver ${nic_driver}
And Initialize layer interface
And Configure topology for IPv6 LISP testing
And Configure LISP in 2-node circular topology ${dut1} ${DUT1_${int}2}[0] ${NONE} ${duts_locator_set} ${dut1_ip6_eid} ${dut1_to_tg_ip6_static_adjacency} ${is_gpe}
Then Send packet and verify LISP GPE encap ${tg} ${tg_if1_ip6} ${dst_ip6} ${TG_pf1}[0] ${TG_pf1_mac}[0] ${DUT1_vf1_mac}[0] ${TG_pf2}[0] ${DUT1_vf2_mac}[0] ${TG_pf2_mac}[0] ${src_rloc6} ${dst_rloc6}
6.8.1.2.2. 78B-0c-ethip6lispgpe-ip6base-scapy¶
frame_size=${78} phy_cores=${0}