2.97. test_nat44_ed module¶
- class test_nat44_ed.NAT44EDTestCase(methodName='runTest')¶
Bases:
framework.VppTestCase- property config_flags¶
- classmethod configure_ip4_interface(i, hosts=0, table_id=None)¶
- classmethod create_and_add_ip4_table(i, table_id=0)¶
- create_stream_frag(src_if, dst, sport, dport, data, proto=6, echo_reply=False)¶
- create_stream_in(in_if, out_if, dst_ip=None, ttl=64)¶
- create_stream_out(out_if, dst_ip=None, ttl=64, use_inside_ports=False)¶
- create_tcp_stream(in_if, out_if, count)¶
- frag_in_order(proto=6, dont_translate=False, ignore_port=False)¶
- frag_in_order_in_plus_out(in_addr, out_addr, in_port, out_port, proto=6)¶
- frag_out_of_order(proto=6, dont_translate=False, ignore_port=False)¶
- frag_out_of_order_in_plus_out(in_addr, out_addr, in_port, out_port, proto=6)¶
- get_err_counter(path)¶
- icmp_id_in = 6305¶
- icmp_id_out = 6305¶
- init_tcp_session(in_if, out_if, in_port, ext_port)¶
- max_sessions = 100¶
- property nat44_config_flags¶
- nat_add_address(address, twice_nat=0, vrf_id=4294967295, is_add=1)¶
- nat_add_inside_interface(i)¶
- classmethod nat_add_interface_address(i)¶
- nat_add_outside_interface(i)¶
- nat_add_static_mapping(local_ip, external_ip='0.0.0.0', local_port=0, external_port=0, vrf_id=0, is_add=1, external_sw_if_index=4294967295, proto=0, tag='', flags=0)¶
- nat_addr = '10.0.0.3'¶
- plugin_disable()¶
- plugin_enable()¶
- static proto2layer(proto)¶
- static random_port()¶
- reass_frags_and_verify(frags, src, dst)¶
- reass_hairpinning(server_addr, server_in_port, server_out_port, host_in_port, proto=6, ignore_port=False)¶
- property server_addr¶
- setUp()¶
Clear trace before running each test
- classmethod setUpClass()¶
Perform class setup before running the testcase Remove shared memory files, start vpp and connect the vpp-api
- property syslog_severity¶
- tcp_external_port = 80¶
- tcp_port_in = 6303¶
- tcp_port_out = 6303¶
- tearDown()¶
Show various debug prints after each test
- twice_nat_common(self_twice_nat=False, same_pg=False, lb=False, client_id=None)¶
- udp_port_in = 6304¶
- udp_port_out = 6304¶
- verify_capture_in(capture, in_if)¶
- verify_capture_out(capture, nat_ip=None, same_port=False, dst_ip=None, ignore_port=False)¶
- verify_syslog_sess(data, is_add=True, is_ip6=False)¶
- class test_nat44_ed.TestNAT44ED(methodName='runTest')¶
Bases:
test_nat44_ed.NAT44EDTestCaseNAT44ED Test Case
- test_forwarding()¶
NAT44ED forwarding test
- test_frag_out_of_order_do_not_translate()¶
NAT44ED don’t translate fragments arriving out of order
- test_icmp_echo_reply_trailer()¶
ICMP echo reply with ethernet trailer
- test_icmp_error()¶
NAT44ED test ICMP error message with inner header
- test_lb_affinity()¶
NAT44ED local service load balancing affinity
- test_multiple_vrf_1()¶
Multiple VRF - both client & service in VRF1
- test_multiple_vrf_2()¶
Multiple VRF - dynamic NAT from VRF1 to VRF0 (output-feature)
- test_multiple_vrf_3()¶
Multiple VRF - client in VRF1, service in VRF0
- test_multiple_vrf_4()¶
Multiple VRF - client in VRF0, service in VRF1
- test_multiple_vrf_5()¶
Multiple VRF - forwarding - no translation
- test_output_feature()¶
NAT44ED interface output feature (in2out postrouting)
- test_output_feature_and_service2()¶
NAT44ED interface output feature and service host direct access
- test_outside_address_distribution()¶
Outside address distribution based on source address
- test_self_twice_nat_lb_positive()¶
NAT44ED Self Twice NAT local service load balancing (positive test)
- test_self_twice_nat_positive()¶
NAT44ED Self Twice NAT (positive test)
- test_static_lb()¶
NAT44ED local service load balancing
- test_static_lb_2()¶
NAT44ED local service load balancing (asymmetrical rule)
- test_static_with_port_out2()¶
NAT44ED 1:1 NAPT asymmetrical rule
- test_twice_nat()¶
NAT44ED Twice NAT
- test_twice_nat_lb()¶
NAT44ED Twice NAT local service load balancing
- test_users_dump()¶
NAT44ED API test - nat44_user_dump
- class test_nat44_ed.TestNAT44EDMW(methodName='runTest')¶
Bases:
test_nat44_ed.TestNAT44EDNAT44ED MW Test Case
- max_sessions = 5000¶
- test_dynamic()¶
NAT44ED dynamic translation test
- test_dynamic_out_of_ports()¶
NAT44ED dynamic translation test: out of ports
- test_dynamic_output_feature_vrf()¶
NAT44ED dynamic translation test: output-feature, VRF
- test_dynamic_vrf()¶
NAT44ED dynamic translation test: different VRF
- test_forwarding()¶
NAT44ED forwarding test
- test_frag_in_order()¶
NAT44ED translate fragments arriving in order
- test_frag_in_order_do_not_translate()¶
NAT44ED don’t translate fragments arriving in order
- test_frag_in_order_in_plus_out()¶
NAT44ED in+out interface fragments in order
- test_frag_out_of_order()¶
NAT44ED translate fragments arriving out of order
- test_frag_out_of_order_do_not_translate()¶
NAT44ED don’t translate fragments arriving out of order
- test_frag_out_of_order_in_plus_out()¶
NAT44ED in+out interface fragments out of order
- test_hairpinning_unknown_proto()¶
NAT44ED translate packet with unknown protocol - hairpinning
- test_icmp_error_fwd_outbound()¶
NAT44ED ICMP error outbound with forwarding enabled
- test_lb_affinity()¶
NAT44ED local service load balancing affinity
- test_lru_cleanup()¶
NAT44ED LRU cleanup algorithm
- test_multiple_vrf()¶
NAT44ED Multiple VRF setup
- test_next_src_nat()¶
NAT44ED On way back forward packet to nat44-in2out node.
- test_one_armed_nat44_static()¶
NAT44ED One armed NAT and 1:1 NAPT asymmetrical rule
- test_output_feature()¶
NAT44ED interface output feature (in2out postrouting)
- test_output_feature_and_service()¶
NAT44ED interface output feature and services
- test_output_feature_and_service2()¶
NAT44ED interface output feature and service host direct access
- test_output_feature_and_service3()¶
NAT44ED interface output feature and DST NAT
- test_output_feature_stateful_acl()¶
NAT44ED output feature works with stateful ACL
- test_reass_hairpinning()¶
NAT44ED fragments hairpinning
- test_self_twice_nat_lb_negative()¶
NAT44ED Self Twice NAT local service load balancing (negative test)
- test_self_twice_nat_lb_positive()¶
NAT44ED Self Twice NAT local service load balancing (positive test)
- test_self_twice_nat_negative()¶
NAT44ED Self Twice NAT (negative test)
- test_self_twice_nat_positive()¶
NAT44ED Self Twice NAT (positive test)
- test_session_limit_per_vrf()¶
NAT44ED per vrf session limit
- test_session_rst_timeout()¶
NAT44ED session RST timeouts
- test_show_max_translations()¶
NAT44ED API test - max translations per thread
- test_static_lb()¶
NAT44ED local service load balancing
- test_static_lb_2()¶
NAT44ED local service load balancing (asymmetrical rule)
- test_static_lb_multi_clients()¶
NAT44ED local service load balancing - multiple clients
- test_static_with_port_out2()¶
NAT44ED 1:1 NAPT asymmetrical rule
- test_syslog_sess()¶
NAT44ED Test syslog session creation and deletion
- test_tcp_close()¶
NAT44ED Close TCP session from inside network - output feature
- test_tcp_session_close_in()¶
NAT44ED Close TCP session from inside network
- test_tcp_session_close_out()¶
NAT44ED Close TCP session from outside network
- test_tcp_session_close_simultaneous()¶
NAT44ED Close TCP session from inside network
- test_twice_nat()¶
NAT44ED Twice NAT
- test_twice_nat_interface_addr()¶
NAT44ED Acquire twice NAT addresses from interface
- test_twice_nat_lb()¶
NAT44ED Twice NAT local service load balancing
- test_unknown_proto()¶
NAT44ED translate packet with unknown protocol
- test_users_dump()¶
NAT44ED API test - nat44_user_dump
- vpp_worker_count = 4¶