.. _clicmd_src_vnet_vxlan-gpe: =============================================================== Vxlan-gpe cli reference =============================================================== create vxlan-gpe tunnel ------------------------------------------------------------------------- .. code-block:: console create vxlan-gpe tunnel local {remote |group } vni [next-ip4][next-ip6][next-ethernet][next-nsh] [encap-vrf-id ] [decap-vrf-id ] [del] Add or delete a VXLAN-GPE Tunnel. VXLAN-GPE provides the features needed to allow L2 bridge domains (BDs) to span multiple servers. This is done by building an L2 overlay on top of an L3 network underlay using VXLAN-GPE tunnels. This makes it possible for servers to be co-located in the same data center or be separated geographically as long as they are reachable through the underlay L3 network. You can refer to this kind of L2 overlay bridge domain as a VXLAN-GPE segment. Example of how to create a VXLAN-GPE Tunnel: .. code-block:: console create vxlan-gpe tunnel local 10.0.3.1 remote 10.0.3.3 vni 13 encap-vrf-id 7 Example of how to delete a VXLAN-GPE Tunnel: .. code-block:: console create vxlan-gpe tunnel local 10.0.3.1 remote 10.0.3.3 vni 13 del Declaration: ``create_vxlan_gpe_tunnel_command`` `src/vnet/vxlan-gpe/vxlan_gpe.c line 983 `_ Implementation: ``vxlan_gpe_add_del_tunnel_command_fn`` set interface ip vxlan-gpe-bypass ------------------------------------------------------------------------- .. code-block:: console set interface ip vxlan-gpe-bypass [del] This command adds the 'ip4-vxlan-gpe-bypass' graph node for a given interface. By adding the IPv4 vxlan-gpe-bypass graph node to an interface, the node checks for and validate input vxlan_gpe packet and bypass ip4-lookup, ip4-local, ip4-udp-lookup nodes to speedup vxlan_gpe packet forwarding. This node will cause extra overhead to for non-vxlan_gpe packets which is kept at a minimum. Example of graph node before ip4-vxlan-gpe-bypass is enabled: .. code-block:: console show vlib graph ip4-vxlan-gpe-bypass Name Next Previous ip4-vxlan-gpe-bypass error-drop [0] vxlan4-gpe-input [1] ip4-lookup [2] Example of how to enable ip4-vxlan-gpe-bypass on an interface: .. code-block:: console set interface ip vxlan-gpe-bypass GigabitEthernet2/0/0 Example of graph node after ip4-vxlan-gpe-bypass is enabled: .. code-block:: console show vlib graph ip4-vxlan-gpe-bypass Name Next Previous ip4-vxlan-gpe-bypass error-drop [0] ip4-input vxlan4-gpe-input [1] ip4-input-no-checksum ip4-lookup [2] Example of how to display the feature enabled on an interface: .. code-block:: console show ip interface features GigabitEthernet2/0/0 IP feature paths configured on GigabitEthernet2/0/0... ... ipv4 unicast: ip4-vxlan-gpe-bypass ip4-lookup ... Example of how to disable ip4-vxlan-gpe-bypass on an interface: .. code-block:: console set interface ip vxlan-gpe-bypass GigabitEthernet2/0/0 del Declaration: ``set_interface_ip_vxlan_gpe_bypass_command`` `src/vnet/vxlan-gpe/vxlan_gpe.c line 1148 `_ Implementation: ``set_ip4_vxlan_gpe_bypass`` set interface ip6 vxlan-gpe-bypass ------------------------------------------------------------------------- .. code-block:: console set interface ip6 vxlan-gpe-bypass [del] This command adds the 'ip6-vxlan-gpe-bypass' graph node for a given interface. By adding the IPv6 vxlan-gpe-bypass graph node to an interface, the node checks for and validate input vxlan_gpe packet and bypass ip6-lookup, ip6-local, ip6-udp-lookup nodes to speedup vxlan_gpe packet forwarding. This node will cause extra overhead to for non-vxlan_gpe packets which is kept at a minimum. Example of graph node before ip6-vxlan-gpe-bypass is enabled: .. code-block:: console show vlib graph ip6-vxlan-gpe-bypass Name Next Previous ip6-vxlan-gpe-bypass error-drop [0] vxlan6-gpe-input [1] ip6-lookup [2] Example of how to enable ip6-vxlan-gpe-bypass on an interface: .. code-block:: console set interface ip6 vxlan-gpe-bypass GigabitEthernet2/0/0 Example of graph node after ip6-vxlan-gpe-bypass is enabled: .. code-block:: console show vlib graph ip6-vxlan-gpe-bypass Name Next Previous ip6-vxlan-gpe-bypass error-drop [0] ip6-input vxlan6-gpe-input [1] ip4-input-no-checksum ip6-lookup [2] Example of how to display the feature enabled on an interface: .. code-block:: console show ip interface features GigabitEthernet2/0/0 IP feature paths configured on GigabitEthernet2/0/0... ... ipv6 unicast: ip6-vxlan-gpe-bypass ip6-lookup ... Example of how to disable ip6-vxlan-gpe-bypass on an interface: .. code-block:: console set interface ip6 vxlan-gpe-bypass GigabitEthernet2/0/0 del Declaration: ``set_interface_ip6_vxlan_gpe_bypass_command`` `src/vnet/vxlan-gpe/vxlan_gpe.c line 1206 `_ Implementation: ``set_ip6_vxlan_gpe_bypass`` Display all the VXLAN-GPE Tunnel entries. Example of how to display the VXLAN-GPE Tunnel entries: .. code-block:: console show vxlan-gpe tunnel [0] local 10.0.3.1 remote 10.0.3.3 vni 13 encap_fib_index 0 sw_if_index 5 decap_next l2 Declaration: ``show_vxlan_gpe_tunnel_command`` `src/vnet/vxlan-gpe/vxlan_gpe.c line 1035 `_ Implementation: ``show_vxlan_gpe_tunnel_command_fn``