Access Control Lists with VPP
This section is overview of the options available to implement ACLs in FD.io VPP. As there are a number of way’s to address ACL-like functionality, it is worth a separate survey of these options with some commentary on features and performance
All performance numbers and examples from this document are reused from the FD.io CSIT v19.04 performance report All information and performance is accurate for FD.io VPP 19.04 release. The sections performance & operational data below correlate directly with those sections from the FD.io CSIT performance report.
Summary
Option |
Relative Performan ce |
Features & Notes |
|---|---|---|
Lowest |
Match on restricted L2-L4 fields, stateful & stateless |
|
Highest (software only) |
Match on Layer 3 IPs, stateless |
|
Highest (accelera ted) |
Match on restricted L2-L4 fields, stateless, limited number of flows |
|
TBD |
Match on any field in the first 80 bytes, Not measured |
FD.io VPP ACL Options
The FD.io VPP ACL Plugin
The plugin was originally developed as part of FD.io VPP and OpenStack integration. The plugin needs to be enabled on specific interfaces.
Supports stateful and stateless ACLs on …
MACs
IPS
UDP Ports
TCP Ports & Flags
ICMP Messages
Directional
Input ACLs
Run before the IP flow classification.
ACLs
Run before interface output.
Actions
Permit (sl)
Drop (sf)
Permit+Reflect (sf)
Stateful (sf)
Actions: permit+reflect
Most heavily optimized, as are the most common use case.
Faster because stateful uses a flow cache, it means the ACL hit is only taken once, up front for the flow and then becomes just look-up.
Uses more memory, less deterministic as the flow cache makes it more susceptible to the effects of the memory hierarchy and locality.
Stateless (sl)
Actions : permit, drop
Less optimized, less common use case.
Slower as there is no flow-cache, every new packet incurs the same amount ACL processing.
Uses less memory, and are more deterministic (compared to stateful).
Operational Data
Input/Stateless
Test Case: 10ge2p1x520-ethip4udp-ip4base-iacl1sl-10kflows-ndrpdr
DUT1:
Thread 0 vpp_main (lcore 1)
Time 3.8, average vectors/node 0.00, last 128 main loops 0.00 per node 0.00
vector rates in 0.0000e0, out 0.0000e0, drop 0.0000e0, punt 0.0000e0
Name State Calls Vectors Suspends Clocks Vectors/Call
acl-plugin-fa-cleaner-process any wait 0 0 14 1.29e3 0.00
acl-plugin-fa-worker-cleaner-pinterrupt wa 7 0 0 9.18e2 0.00
api-rx-from-ring active 0 0 52 8.96e4 0.00
dpdk-process any wait 0 0 1 1.35e4 0.00
fib-walk any wait 0 0 2 2.69e3 0.00
ip6-icmp-neighbor-discovery-ev any wait 0 0 4 1.32e3 0.00
lisp-retry-service any wait 0 0 2 2.90e3 0.00
unix-epoll-input polling 7037 0 0 1.25e6 0.00
vpe-oam-process any wait 0 0 2 2.28e3 0.00
Thread 1 vpp_wk_0 (lcore 2)
Time 3.8, average vectors/node 249.02, last 128 main loops 32.00 per node 273.07
vector rates in 6.1118e6, out 6.1118e6, drop 0.0000e0, punt 0.0000e0
Name State Calls Vectors Suspends Clocks Vectors/Call
TenGigabitEtherneta/0/0-output active 47106 11721472 0 9.47e0 248.83
TenGigabitEtherneta/0/0-tx active 47106 11721472 0 4.22e1 248.83
TenGigabitEtherneta/0/1-output active 47106 11721472 0 1.02e1 248.83
TenGigabitEtherneta/0/1-tx active 47106 11721472 0 4.18e1 248.83
acl-plugin-fa-worker-cleaner-pinterrupt wa 7 0 0 1.39e3 0.00
acl-plugin-in-ip4-fa active 94107 23442944 0 1.75e2 249.11
dpdk-input polling 47106 23442944 0 4.64e1 497.66
ethernet-input active 94212 23442944 0 1.55e1 248.83
ip4-input-no-checksum active 94107 23442944 0 3.23e1 249.11
ip4-lookup active 94107 23442944 0 2.91e1 249.11
ip4-rewrite active 94107 23442944 0 2.48e1 249.11
unix-epoll-input polling 46 0 0 1.54e3 0.00
Input/Stateful
Test Case: 64b-1t1c-ethip4udp-ip4base-iacl1sf-10kflows-ndrpdr
DUT1:
Thread 0 vpp_main (lcore 1)
Time 3.9, average vectors/node 0.00, last 128 main loops 0.00 per node 0.00
vector rates in 0.0000e0, out 0.0000e0, drop 0.0000e0, punt 0.0000e0
Name State Calls Vectors Suspends Clocks Vectors/Call
acl-plugin-fa-cleaner-process any wait 0 0 16 1.40e3 0.00
acl-plugin-fa-worker-cleaner-pinterrupt wa 8 0 0 8.97e2 0.00
api-rx-from-ring active 0 0 52 7.12e4 0.00
dpdk-process any wait 0 0 1 1.69e4 0.00
fib-walk any wait 0 0 2 2.55e3 0.00
ip4-reassembly-expire-walk any wait 0 0 1 1.27e4 0.00
ip6-icmp-neighbor-discovery-ev any wait 0 0 4 1.09e3 0.00
ip6-reassembly-expire-walk any wait 0 0 1 2.57e3 0.00
lisp-retry-service any wait 0 0 2 1.18e4 0.00
statseg-collector-process time wait 0 0 1 6.38e3 0.00
unix-epoll-input polling 6320 0 0 1.41e6 0.00
vpe-oam-process any wait 0 0 2 7.53e3 0.00
Thread 1 vpp_wk_0 (lcore 2)
Time 3.9, average vectors/node 252.74, last 128 main loops 32.00 per node 273.07
vector rates in 7.5833e6, out 7.5833e6, drop 0.0000e0, punt 0.0000e0
Name State Calls Vectors Suspends Clocks Vectors/Call
TenGigabitEtherneta/0/0-output active 58325 14738944 0 9.41e0 252.70
TenGigabitEtherneta/0/0-tx active 58325 14738944 0 4.32e1 252.70
TenGigabitEtherneta/0/1-output active 58323 14738944 0 1.02e1 252.71
TenGigabitEtherneta/0/1-tx active 58323 14738944 0 4.31e1 252.71
acl-plugin-fa-worker-cleaner-pinterrupt wa 8 0 0 1.62e3 0.00
acl-plugin-in-ip4-fa active 116628 29477888 0 1.01e2 252.75
dpdk-input polling 58325 29477888 0 4.63e1 505.41
ethernet-input active 116648 29477888 0 1.53e1 252.71
ip4-input-no-checksum active 116628 29477888 0 3.21e1 252.75
ip4-lookup active 116628 29477888 0 2.90e1 252.75
ip4-rewrite active 116628 29477888 0 2.48e1 252.75
unix-epoll-input polling 57 0 0 2.39e3 0.00
Output/Stateless
Test Case: 64b-1t1c-ethip4udp-ip4base-oacl10sl-10kflows-ndrpdr
DUT1: Thread 0 vpp_main (lcore 1) Time 3.8, average vectors/node 0.00, last 128 main loops 0.00 per node 0.00 vector rates in 0.0000e0, out 0.0000e0, drop 0.0000e0, punt 0.0000e0 Name State Calls Vectors Suspends Clocks Vectors/Call acl-plugin-fa-cleaner-process any wait 0 0 14 1.43e3 0.00 acl-plugin-fa-worker-cleaner-pinterrupt wa 7 0 0 9.23e2 0.00 api-rx-from-ring active 0 0 52 8.01e4 0.00 dpdk-process any wait 0 0 1 1.59e6 0.00 fib-walk any wait 0 0 2 6.81e3 0.00 ip6-icmp-neighbor-discovery-ev any wait 0 0 4 2.81e3 0.00 lisp-retry-service any wait 0 0 2 3.64e3 0.00 unix-epoll-input polling 4842 0 0 1.81e6 0.00 vpe-oam-process any wait 0 0 1 2.24e4 0.00 Thread 1 vpp_wk_0 (lcore 2) Time 3.8, average vectors/node 249.29, last 128 main loops 36.00 per node 271.06 vector rates in 5.9196e6, out 5.9196e6, drop 0.0000e0, punt 0.0000e0 Name State Calls Vectors Suspends Clocks Vectors/Call TenGigabitEtherneta/0/0-output active 45595 11363584 0 9.22e0 249.23 TenGigabitEtherneta/0/0-tx active 45595 11363584 0 4.25e1 249.23 TenGigabitEtherneta/0/1-output active 45594 11363584 0 9.75e0 249.23 TenGigabitEtherneta/0/1-tx active 45594 11363584 0 4.21e1 249.23 acl-plugin-fa-worker-cleaner-pinterrupt wa 7 0 0 1.28e3 0.00 acl-plugin-out-ip4-fa active 91155 22727168 0 1.78e2 249.32 dpdk-input polling 45595 22727168 0 4.64e1 498.46 ethernet-input active 91189 22727168 0 1.56e1 249.23 interface-output active 91155 22727168 0 1.13e1 249.32 ip4-input-no-checksum active 91155 22727168 0 1.95e1 249.32 ip4-lookup active 91155 22727168 0 2.88e1 249.32 ip4-rewrite active 91155 22727168 0 3.53e1 249.32 unix-epoll-input polling 44 0 0 1.53e3 0.00
Output/Stateful
Test Case: 64b-1t1c-ethip4udp-ip4base-oacl10sf-10kflows-ndrpdr
DUT1:
Thread 0 vpp_main (lcore 1)
Time 3.8, average vectors/node 0.00, last 128 main loops 0.00 per node 0.00
vector rates in 0.0000e0, out 0.0000e0, drop 0.0000e0, punt 0.0000e0
Name State Calls Vectors Suspends Clocks Vectors/Call
acl-plugin-fa-cleaner-process any wait 0 0 16 1.47e3 0.00
acl-plugin-fa-worker-cleaner-pinterrupt wa 8 0 0 8.51e2 0.00
api-rx-from-ring active 0 0 50 7.24e4 0.00
dpdk-process any wait 0 0 2 1.93e4 0.00
fib-walk any wait 0 0 2 2.02e3 0.00
ip4-reassembly-expire-walk any wait 0 0 1 3.96e3 0.00
ip6-icmp-neighbor-discovery-ev any wait 0 0 4 9.84e2 0.00
ip6-reassembly-expire-walk any wait 0 0 1 3.76e3 0.00
lisp-retry-service any wait 0 0 2 1.49e4 0.00
statseg-collector-process time wait 0 0 1 4.98e3 0.00
unix-epoll-input polling 5653 0 0 1.55e6 0.00
vpe-oam-process any wait 0 0 2 1.90e3 0.00
Thread 1 vpp_wk_0 (lcore 2)
Time 3.8, average vectors/node 250.85, last 128 main loops 36.00 per node 271.06
vector rates in 7.2686e6, out 7.2686e6, drop 0.0000e0, punt 0.0000e0
Name State Calls Vectors Suspends Clocks Vectors/Call
TenGigabitEtherneta/0/0-output active 55639 13930752 0 9.33e0 250.38
TenGigabitEtherneta/0/0-tx active 55639 13930752 0 4.27e1 250.38
TenGigabitEtherneta/0/1-output active 55636 13930758 0 9.81e0 250.39
TenGigabitEtherneta/0/1-tx active 55636 13930758 0 4.33e1 250.39
acl-plugin-fa-worker-cleaner-pinterrupt wa 8 0 0 1.62e3 0.00
acl-plugin-out-ip4-fa active 110988 27861510 0 1.04e2 251.03
dpdk-input polling 55639 27861510 0 4.62e1 500.76
ethernet-input active 111275 27861510 0 1.55e1 250.38
interface-output active 110988 27861510 0 1.21e1 251.03
ip4-input-no-checksum active 110988 27861510 0 1.95e1 251.03
ip4-lookup active 110988 27861510 0 2.89e1 251.03
ip4-rewrite active 110988 27861510 0 3.55e1 251.03
unix-epoll-input polling 54 0 0 2.43e3 0.00
Performance
Test Case |
MPPS |
Cycles per packet |
ethip4-ip4base |
18.26 |
136 |
ethip4ip4udp-ip4base-iacl1sl-10kflows |
9.134 |
273 |
ethip4ip4udp-ip4base-iacl1sf-10kflows |
11.06 |
226 |
Input ACLS (SKX)
Output ACLs (HSW)
Configuration
Stateful
$ sudo vppctl ip_add_del_route 20.20.20.0/24 via 1.1.1.2 sw_if_index 1 resolve-attempts 10 count 1
$ sudo vppctl acl_add_replace ipv4 permit src 30.30.30.1/32 dst 40.40.40.1/32 sport 1000 dport 1000, ipv4 permit+reflect src 10.10.10.0/24, ipv4 permit+reflect src 20.20.20.0/24
$ sudo vppctl acl_interface_set_acl_list sw_if_index 2 input 0
$ sudo vppctl acl_interface_set_acl_list sw_if_index 1 input 0
Stateless
$ sudo vppctl ip_add_del_route 20.20.20.0/24 via 1.1.1.2 sw_if_index 1 resolve-attempts 10 count 1
$ sudo vppctl acl_add_replace ipv4 permit src 30.30.30.1/32 dst 40.40.40.1/32 sport 1000 dport 1000, ipv4 permit src 10.10.10.0/24, ipv4 permit src 20.20.20.0/24
$ sudo vppctl acl_interface_set_acl_list sw_if_index 2 input 0
$ sudo vppctl acl_interface_set_acl_list sw_if_index 1 input 0
Links
FD.io VPP COP
IPv4/IPv6 white-lists using the FD.io VPP FIB, with support for multiple nested white-lists.
Design notes:
The cop graph nodes (input & white-list) make reuse of the FD.io VPP in FIB 2.0 implementation. Essentially a successful lookup in the FIB, indicates that a packet has been white-listed and may be forwarded.
cop-input: Determines if the frame is IPv4 or IPv6, and forwards to ipN-copwhitelist graph node.
ipN-copwhitelist: uses the ip4_fib_[mtrie,lookup] functions to confirm the packet’s ip matches a route in the white-list fib.
Match: if it matches, it is then either sent to the next whitelist or to the ip layer.
No Match: if it there is not match, it is sent to error-drop.
Operational Data
Note: the double-pass of the ip4-lookup and ip4-rewrite.
DUT1:
Thread 0 vpp_main (lcore 1)
Time 3.9, average vectors/node 0.00, last 128 main loops 0.00 per node 0.00
vector rates in 0.0000e0, out 0.0000e0, drop 0.0000e0, punt 0.0000e0
Name State Calls Vectors Suspends Clocks Vectors/Call
api-rx-from-ring active 0 0 53 4.20e4 0.00
dpdk-process any wait 0 0 1 1.75e4 0.00
fib-walk any wait 0 0 2 1.59e3 0.00
ip4-reassembly-expire-walk any wait 0 0 1 2.20e3 0.00
ip6-icmp-neighbor-discovery-ev any wait 0 0 4 1.14e3 0.00
ip6-reassembly-expire-walk any wait 0 0 1 1.50e3 0.00
lisp-retry-service any wait 0 0 2 2.19e3 0.00
statseg-collector-process time wait 0 0 1 2.48e3 0.00
unix-epoll-input polling 2800 0 0 3.15e6 0.00
vpe-oam-process any wait 0 0 2 7.00e2 0.00
Thread 1 vpp_wk_0 (lcore 2)
Time 3.9, average vectors/node 220.84, last 128 main loops 20.87 per node 190.86
vector rates in 1.0724e7, out 1.0724e7, drop 0.0000e0, punt 0.0000e0
Name State Calls Vectors Suspends Clocks Vectors/Call
TenGigabitEtherneta/0/0-output active 94960 20698112 0 1.03e1 217.97
TenGigabitEtherneta/0/0-tx active 94960 20698112 0 3.97e1 217.97
TenGigabitEtherneta/0/1-output active 92238 20698112 0 9.92e0 224.39
TenGigabitEtherneta/0/1-tx active 92238 20698112 0 4.26e1 224.39
cop-input active 94960 20698112 0 1.98e1 217.97
dpdk-input polling 95154 41396224 0 4.58e1 435.04
ethernet-input active 92238 20698112 0 1.59e1 224.39
ip4-cop-whitelist active 94960 20698112 0 3.24e1 217.97
ip4-input active 94960 20698112 0 3.13e1 217.97
ip4-input-no-checksum active 92238 20698112 0 2.23e1 224.39
ip4-lookup active 187198 41396224 0 3.08e1 221.14
ip4-rewrite active 187198 41396224 0 2.47e1 221.14
unix-epoll-input polling 93 0 0 1.35e3 0.00
Performance
Test Case |
MPPS |
Cycles per packet |
ethip4-ip4base |
18.81 |
132 |
ethip4-ip4base-copwhtlistbase |
15.12 |
165 |
Configuration
Note: a new VRF 1 is created which holds the whitelist, which then applied to the interface 1.
$ sudo vppctl ip_add_del_route 10.10.10.0/24 via 1.1.1.1 sw_if_index 2 resolve-attempts 10 count 1
$ sudo vppctl ip_table_add_del table 1
$ sudo vppctl ip_add_del_route 20.20.20.0/24 vrf 1 resolve-attempts 10 count 1 local
$ sudo vppctl cop_whitelist_enable_disable sw_if_index 1 ip4 fib-id 1
$ sudo vppctl cop_interface_enable_disable sw_if_index 1
Links
FD.io VPP Flow
FD.io VPP Flow adds the ability for FD.io VPP to support matching of flows and taking an associated action. This information is then used to program hardware accelerations such as those available on network cards, e.g. Intel® Ethernet Flow Director technology on the Intel® Ethernet Controller X710/XXV710/XL710.
Supports
Actions
Count: don’t now what this does, presume it count’s matches.
Mark: Associate a matched flow with arbitrary data such as vxlan tunnel, for a lookup in the redirect graph node.
Buffer Advance: Can be used advance to an encapsulated ethernet or ip header.
Redirect to node: When you see a packet from flow xyz, the next node in FD.io VPP is the indicated graph node.
Redirect to queue: When you see a packet from flow xyz, is to redirect to rx queue n.
Drop: When you see a packet from flow xyz, drop the packet (next node is error drop).
Design Notes
Currently the only place in FD.io VPP that this is used, is to accelerate VXLAN bypassing the Ethernet and IP Layers.
Flow uses DPDK rte_flow API under the hood for those network interfaces programmed through DPDK.
Redirect to node: worth remember that if you are bypassing a graph, you are bypassing all the checks in the graph node, e.e time-to-live, crcs and the like.
Operational Data
FD.io CSIT numbers for VXLan do not use FD.io Flow support.
Performance
FD.io CSIT numbers for VXLan do not use FD.io Flow support.
Configuration
FD.io VPP Classifiers
The most flexible form of ACLs in FD.io VPP enable the user to match anywhere in the first 80 bytes of the packet header.
Configuration
Match an IPv6….
$ sudo vppctl classify table mask l3 ip6 dst buckets 64
$ sudo vppctl classify session hit-next 0 table-index 0 match l3 ip6 dst 2001:db8:1::2 opaque-index 42
$ sudo vppctl set interface l2 input classify intfc host-s0_s1 ip6-table 0