Setting Up a Node with Multiple NICs ==================================== - First, configure hardware interfaces in the VPP startup config, as described `here `__. - For each interface owned by Linux, you need to provide individual configuration for each interface used by VPP in the Node Configuration for the node in the ``contiv-vpp.yaml``. For example, if both ``ens3`` and ``ens4`` are known to Linux, then put the following stanza into the node’s NodeConfig: :: ... NodeConfig: - NodeName: "ubuntu-1" StealInterface: "ens3" StealInterface: "ens4" ... If only ``ens3`` is known to Linux, you only put a line for ``ens3`` into the above NodeConfig.