FD.io VPP
v21.01
Vector Packet Processing
|
The load balancer plugin is currently in beta version. Both CLIs and APIs are subject to heavy changes, which also means feedback is really welcome regarding features, apis, etc...
This plugin provides load balancing for VPP in a way that is largely inspired from Google's MagLev: http://research.google.com/pubs/pub44824.html
The load balancer is configured with a set of Virtual IPs (VIP, which can be prefixes), and for each VIP, with a set of Application Server addresses (ASs).
There are four encap types to steer traffic to different ASs: 1). IPv4+GRE ad IPv6+GRE encap types: Traffic received for a given VIP (or VIP prefix) is tunneled using GRE towards the different ASs in a way that (tries to) ensure that a given session will always be tunneled to the same AS.
2). IPv4+L3DSR encap types: L3DSR is used to overcome Layer 2 limitations of Direct Server Return Load Balancing. It maps VIP to DSCP bits, and reuse TOS bits to transfer DSCP bits to server, and then server will get VIP from DSCP-to-VIP mapping.
Both VIPs or ASs can be IPv4 or IPv6, but for a given VIP, all ASs must be using the same encap. type (i.e. IPv4+GRE or IPv6+GRE or IPv4+L3DSR). Meaning that for a given VIP, all AS addresses must be of the same family.
3). IPv4/IPv6 + NAT4/NAT6 encap types: This type provides kube-proxy data plane on user space, which is used to replace linux kernel's kube-proxy based on iptables.
Currently, load balancer plugin supports three service types: a) Cluster IP plus Port: support any protocols, including TCP, UDP. b) Node IP plus Node Port: currently only support UDP. c) External Load Balancer.
For Cluster IP plus Port case: kube-proxy is configured with a set of Virtual IPs (VIP, which can be prefixes), and for each VIP, with a set of AS addresses (ASs).
For a specific session received for a given VIP (or VIP prefix), first packet selects a AS according to internal load balancing algorithm, then does DNAT operation and sent to chosen AS. At the same time, will create a session entry to store AS chosen result. Following packets for that session will look up session table first, which ensures that a given session will always be routed to the same AS.
For returned packet from AS, it will do SNAT operation and sent out.
Please refer to below for details: https://schd.ws/hosted_files/ossna2017/1e/VPP_K8S_GTPU_OSSNA.pdf
The load balancer has been tested up to 1 millions flows and still forwards more than 3Mpps per core in such circumstances. Although 3Mpps seems already good, it is likely that performance will be improved in next versions.
The load balancer needs to be configured with some parameters:
lb conf [ip4-src-address <addr>] [ip6-src-address <addr>] [buckets <n>] [timeout <s>]
ip4-src-address: the source address used to send encap. packets using IPv4 for GRE4 mode. or Node IP4 address for NAT4 mode.
ip6-src-address: the source address used to send encap. packets using IPv6 for GRE6 mode. or Node IP6 address for NAT6 mode.
buckets: the per-thread established-connections-table number of buckets.
timeout: the number of seconds a connection will remain in the established-connections-table while no packet for this flow is received.
lb vip <prefix> [encap (gre6|gre4|l3dsr|nat4|nat6)] \ [dscp <n>] [port <n> target_port <n> node_port <n>] [new_len <n>] [del]
new_len is the size of the new-connection-table. It should be 1 or 2 orders of magnitude bigger than the number of ASs for the VIP in order to ensure a good load balancing. Encap l3dsr and dscp is used to map VIP to dscp bit and rewrite DSCP bit in packets. So the selected server could get VIP from DSCP bit in this packet and perform DSR. Encap nat4/nat6 and port/target_port/node_port is used to do kube-proxy data plane.
Examples:
lb vip 2002::/16 encap gre6 new_len 1024 lb vip 2003::/16 encap gre4 new_len 2048 lb vip 80.0.0.0/8 encap gre6 new_len 16 lb vip 90.0.0.0/8 encap gre4 new_len 1024 lb vip 100.0.0.0/8 encap l3dsr dscp 2 new_len 32 lb vip 90.1.2.1/32 encap nat4 port 3306 target_port 3307 node_port 30964 new_len 1024 lb vip 2004::/16 encap nat6 port 6306 target_port 6307 node_port 30966 new_len 1024
lb as <vip-prefix> [<address> [<address> [...]]] [del]
You can add (or delete) as many ASs at a time (for a single VIP). Note that the AS address family must correspond to the VIP encap. IP family.
Examples:
lb as 2002::/16 2001::2 2001::3 2001::4 lb as 2003::/16 10.0.0.1 10.0.0.2 lb as 80.0.0.0/8 2001::2 lb as 90.0.0.0/8 10.0.0.1
lb set interface nat4 in <intfc> [del]
Set SNAT feature in a specific interface. (applicable in NAT4 mode only)
lb set interface nat6 in <intfc> [del]
Set SNAT feature in a specific interface. (applicable in NAT6 mode only)
The plugin provides quite a bunch of counters and information. These are still subject to quite significant changes.
show lb show lb vip show lb vip verbose show node counters
MagLev is a distributed system which pseudo-randomly generates a new-connections-table based on AS names such that each server configured with the same set of ASs ends up with the same table. Connection stickyness is then ensured with an established-connections-table. Using ECMP, it is assumed (but not relied on) that servers will mostly receive traffic for different flows.
This implementation pushes the parallelism a little bit further by using one established-connections table per thread. This is equivalent to assuming that RSS will make a job similar to ECMP, and is pretty useful as threads don't need to get a lock in order to write in the table.
A load balancer requires an efficient read and write hash table. The hash table used by ip6-forward is very read-efficient, but not so much for writing. In addition, it is not a big deal if writing into the hash table fails (again, MagLev uses a flow table but does not heaviliy relies on it).
The plugin therefore uses a very specific (and stupid) hash table.
When an AS is removed, there is two possible ways to react.
In the first case, although an AS is removed from the configuration, its associated state needs to stay around as long as it is used by at least one thread.
In order to avoid locks, a specific reference counter is used. The design is quite similar to clib counters but:
This reference counter is lock free, but reading a count of 0 does not mean the value can be freed unless it is ensured by other means that no other thread is concurrently referencing the object. In the case of this plugin, it is assumed that no concurrent event will take place after a few seconds.