FD.io VPP  v19.04.1-1-ge4a0f9f
Vector Packet Processing
nsh.api
Go to the documentation of this file.
1 
2 
3 /** \brief /** \brief Set or delete an NSH header entry keyed by NSP/NSI
4  @param client_index - opaque cookie to identify the sender
5  @param context - sender context, to match reply w/ request
6  @param is_add - add address if non-zero, else delete
7  @param nsp_nsi - Key for nsh_header_t entry to map to. : 24bit NSP 8bit NSI
8  @param md_type - metadata type [1|2] - only MDType1 supported today
9  @param ver_o_c - version, O-bit and C-bit (see nsh_packet.h)
10  @param ttl - indicates the maximum SFF hops for an SFP
11  @param length - header length in n x 32bits, should be 6 for MDtype1
12  @param next_protocol - next protocol encapsulated behind NSH header: 1=Ethernet, 2=IP4, 3=IP6
13  @param c1 - 32bit Metadata type1 field (context1)
14  @param c2 - 32bit Metadata type1 field (context2)
15  @param c3 - 32bit Metadata type1 field (context3)
16  @param c4 - 32bit Metadata type1 field (context4)
17  @param tlvs - Metadata Type 2 only, Type Length Value metadata.
18 */
19 define nsh_add_del_entry {
20  u32 client_index;
21  u32 context;
22  u8 is_add;
23  u32 nsp_nsi;
24  u8 md_type;
25  u8 ver_o_c;
26  u8 ttl;
27  u8 length;
28  u8 next_protocol;
29  u32 c1;
30  u32 c2;
31  u32 c3;
32  u32 c4;
33  u8 tlv_length;
34  u8 tlv[248];
35 };
36 
37 /** \brief Reply from adding NSH entry (nsh_add_del_entry)
38  @param context - sender context, to match reply w/ request
39  @param retval - 0 means all ok
40 */
41 define nsh_add_del_entry_reply {
42  u32 context;
43  i32 retval;
44  u32 entry_index;
45 };
46 
47 
48 define nsh_entry_dump {
49  u32 client_index;
50  u32 context;
51  u32 entry_index;
52 };
53 
54 define nsh_entry_details {
55  u32 context;
56  u32 entry_index;
57  u32 nsp_nsi;
58  u8 md_type;
59  u8 ver_o_c;
60  u8 ttl;
61  u8 length;
62  u8 next_protocol;
63  u32 c1;
64  u32 c2;
65  u32 c3;
66  u32 c4;
67  u8 tlv_length;
68  u8 tlv[248];
69 };
70 
71 /** \brief Set or delete a mapping from one NSH header to another and its egress (decap to inner packet, encap NSH with outer header)
72  @param client_index - opaque cookie to identify the sender
73  @param context - sender context, to match reply w/ request
74  @param is_add - add address if non-zero, else delete
75  @param nsh_nsi - Key for nsh_header_t entry to map to. : 24bit NSP 8bit NSI
76  @param mapped_nsp_nsi - Key for nsh_header_t entry to map to. : 24bit NSP 8bit NSI this may be ~0
77  if next action is to decap to NSH next protocol
78  Note the following heuristic:
79  - if nsp_nsi == mapped_nsp_nsi then use-case is like SFC SFF
80  - if nsp_nsi != mapped_nsp_nsi then use-case is like SFC SF
81  Note: these are heuristics. Rules about NSI decrement are out of scope
82  @param sw_if_index - index number of outer encap for NSH egress
83  @param next_node - explicitly which node to send to
84  Note the above parameters are instantiated by "encap-gre-intf <x>" means sw_if_index x, next_node gre-input
85 */
86 define nsh_add_del_map {
87  u32 client_index;
88  u32 context;
89  u8 is_add;
90  u32 nsp_nsi;
91  u32 mapped_nsp_nsi;
92  u32 nsh_action;
93  u32 sw_if_index;
94  u32 rx_sw_if_index;
95  u32 next_node;
96 };
97 
98 /** \brief Reply from adding NSH map (nsh_add_del_map)
99  @param context - sender context, to match reply w/ request
100  @param retval - 0 means all ok
101 */
102 define nsh_add_del_map_reply {
103  u32 context;
104  i32 retval;
105  u32 map_index;
106 };
107 
108 define nsh_map_dump {
109  u32 client_index;
110  u32 context;
111  u32 map_index;
112 };
113 
114 define nsh_map_details {
115  u32 context;
116  u32 map_index;
117  u32 nsp_nsi;
118  u32 mapped_nsp_nsi;
119  u32 nsh_action;
120  u32 sw_if_index;
121  u32 rx_sw_if_index;
122  u32 next_node;
123 };