3n-icx-xxv710

25ge2p1xxv710-avf-ethip6lispip4-ip6base-ndrpdr

RFC6830: Pkt throughput Lisp test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular opology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv6-LISP-IPv4 on DUT1-DUT2, Eth-IPv6 on TG-DUTn for IPv6 routing over LISPoIPv4 tunnel.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6

outing and static routes. LISPoIPv4 tunnel is configured between DUT1 and DUT2. DUT1 and DUT2 tested with Intel-XXV710.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library.

  • [Ref] Applicable standard specifications: RFC6830.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 1518b-2t1c-avf- 
 ethip6lispip4-ip6base-ndrpdr 

 1.  3.86      49.00 
 2.  3.86      49.00 
  
 3.   75  184  289       100  200  292  
 4.   63  116  168        95  153  211  
 5.   83  115  128        86  118  127  

 1518b-4t2c-avf- 
 ethip6lispip4-ip6base-ndrpdr 

 1.  3.86      49.00 
 2.  3.86      49.00 
  
 3.   73  159  234        96  170  256  
 4.   48   97  161        42   78  107  
 5.   58   78   89        59   78   88  

 imix-2t1c-avf- 
 ethip6lispip4-ip6base-ndrpdr 

 1.  6.77      22.85 
 2.  6.84      23.08 

 imix-8t4c-avf- 
 ethip6lispip4-ip6base-ndrpdr 

 1.  8.10      27.34 
 2.  8.14      27.48

25ge2p1xxv710-avf-ethip6lispip6-ip6base-ndrpdr

RFC6830: Pkt throughput Lisp test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular opology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv6-LISP-IPv6 on DUT1-DUT2, Eth-IPv6 on TG-DUTn for IPv6 routing over LISPoIPv6 tunnel.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6

outing and static routes. LISPoIPv6 tunnel is configured between DUT1 and DUT2. DUT1 and DUT2 tested with Intel-XXV710.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library.

  • [Ref] Applicable standard specifications: RFC6830.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 1518b-2t1c-avf- 
 ethip6lispip6-ip6base-ndrpdr 

 1.  3.58      44.29 
 2.  3.60      44.51 
  
 3.   74  175  279        96  184  269  
 4.   76  129  160       110  174  245  
 5.  157  215  238       157  215  231  

 1518b-4t2c-avf- 
 ethip6lispip6-ip6base-ndrpdr 

 1.  3.90      48.19 
 2.  3.92      48.44 
  
 3.   61  176  256        59  178  269  
 4.   48   76   89        61  105  142  
 5.  110  138  160       121  152  173  

 imix-2t1c-avf- 
 ethip6lispip6-ip6base-ndrpdr 

 1.  4.60      14.04 
 2.  4.64      14.18 

 imix-4t2c-avf- 
 ethip6lispip6-ip6base-ndrpdr 

 1.  5.16      15.78 
 2.  5.19      15.86 

 imix-8t4c-avf- 
 ethip6lispip6-ip6base-ndrpdr 

 1.  5.52      16.85 
 2.  5.54      16.93

25ge2p1xxv710-ethip6lispip4-ip6base-ndrpdr

RFC6830: Pkt throughput Lisp test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular opology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv6-LISP-IPv4 on DUT1-DUT2, Eth-IPv6 on TG-DUTn for IPv6 routing over LISPoIPv4 tunnel.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6

outing and static routes. LISPoIPv4 tunnel is configured between DUT1 and DUT2. DUT1 and DUT2 tested with Intel-XXV710.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library.

  • [Ref] Applicable standard specifications: RFC6830.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 1518b-2t1c- 
 ethip6lispip4-ip6base-ndrpdr 

 1.  3.86      49.00 
 2.  3.86      49.00 
  
 3.   20   53   75        20   35   64  
 4.   38   81   95        51  111  122  
 5.   75  118  126        99  126  139  

 1518b-4t2c- 
 ethip6lispip4-ip6base-ndrpdr 

 1.  3.86      49.00 
 2.  3.86      49.00 
  
 3.   21   43   74        22   49   69  
 4.   42   73   95        40   52   66  
 5.   75  109  120        69   88  105  

 imix-2t1c- 
 ethip6lispip4-ip6base-ndrpdr 

 1.  5.46      18.44 
 2.  5.52      18.63 

 imix-4t2c- 
 ethip6lispip4-ip6base-ndrpdr 

 1.  6.27      21.16 
 2.  6.30      21.26 

 imix-8t4c- 
 ethip6lispip4-ip6base-ndrpdr 

 1.  6.71      22.63 
 2.  6.74      22.74

25ge2p1xxv710-ethip6lispip6-ip6base-ndrpdr

RFC6830: Pkt throughput Lisp test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular opology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv6-LISP-IPv6 on DUT1-DUT2, Eth-IPv6 on TG-DUTn for IPv6 routing over LISPoIPv6 tunnel.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6

outing and static routes. LISPoIPv6 tunnel is configured between DUT1 and DUT2. DUT1 and DUT2 tested with Intel-XXV710.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library.

  • [Ref] Applicable standard specifications: RFC6830.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 1518b-2t1c- 
 ethip6lispip6-ip6base-ndrpdr 

 1.  3.13      38.74 
 2.  3.16      39.14 
  
 3.   20   52   90        20   52   79  
 4.   53   70   85        71   92  102  
 5.  155  204  235       150  214  233  

 1518b-4t2c- 
 ethip6lispip6-ip6base-ndrpdr 

 1.  3.60      44.57 
 2.  3.64      45.02 
  
 3.   20   46   75        21   37   51  
 4.   53   79   95        50   66   80  
 5.  116  162  186       120  162  183  

 imix-2t1c- 
 ethip6lispip6-ip6base-ndrpdr 

 1.  3.94      12.03 
 2.  3.98      12.15 

 imix-4t2c- 
 ethip6lispip6-ip6base-ndrpdr 

 1.  4.47      13.66 
 2.  4.50      13.73 

 imix-8t4c- 
 ethip6lispip6-ip6base-ndrpdr 

 1.  4.79      14.63 
 2.  4.84      14.78