ip6

1n1l-50ge1p1ena-ethip6-ip6base-tg-ndrpdr

RFC2544: Pkt throughput for cross connected NICs with IPv6 raffic profile.

  • [Top] Network Topologies: TG-TG 1-node circular topology with single link between.

  • [Enc] Packet Encapsulations: Eth-IPv6 for L1 cross connect patch.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library.

Test packets are generated by TG on links to TG. TG traffic profile contains two L3 flow-groups (flow-group per direction, 1M flows per flow-group) with all packets containing Ethernet header, IPv6 header with static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
1. Mpps Gbps (NDR)
2. Mpps Gbps (PDR)

One-Way Latency Percentiles in uSec at %PDR load,
one set per each direction:
3. P50 P90 P99 P50 P90 P99 (10% PDR)
4. P50 P90 P99 P50 P90 P99 (50% PDR)
5. P50 P90 P99 P50 P90 P99 (90% PDR)

 78b–ethip6-ip6base-tg-ndrpdr 

 1.  0.79       0.62 
2. 0.79 0.62

3. 15 23 50 14 24 72
4. 14 92 273 14 32 134
5. 16 157 436 15 36 166

 1518b–ethip6- 
ip6base-tg-ndrpdr

 1.  0.74       9.08 
2. 0.74 9.12

3. 16 26 58 16 29 75
4. 16 93 278 16 35 118
5. 20 158 386 17 47 153

 9000b–ethip6- 
ip6base-tg-ndrpdr

 1.  0.28      20.00 
2. 0.28 20.00

3. 21 40 83 22 38 64
4. 22 51 126 22 40 96
5. 21 73 245 21 46 145

 imix–ethip6-ip6base-tg-ndrpdr 

 1.  0.70       2.08 
2. 0.77 2.31

1n1l-50ge1p1ena-ethip6-ip6scale2m-tg-ndrpdr

RFC2544: Pkt throughput for cross connected NICs with IPv6 raffic profile.

  • [Top] Network Topologies: TG-TG 1-node circular topology with single link between.

  • [Enc] Packet Encapsulations: Eth-IPv6 for L1 cross connect patch.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library.

Test packets are generated by TG on links to TG. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv6 header with static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
1. Mpps Gbps (NDR)
2. Mpps Gbps (PDR)

One-Way Latency Percentiles in uSec at %PDR load,
one set per each direction:
3. P50 P90 P99 P50 P90 P99 (10% PDR)
4. P50 P90 P99 P50 P90 P99 (50% PDR)
5. P50 P90 P99 P50 P90 P99 (90% PDR)

 78b–ethip6- 
ip6scale2m-tg-ndrpdr

 1.  0.74       0.58 
2. 0.77 0.61

3. 14 26 285 14 24 273
4. 14 89 567 13 32 317
5. 15 158 573 14 34 405

 1518b–ethip6- 
ip6scale2m-tg-ndrpdr

 1.  0.69       8.53 
2. 0.73 8.97

3. 15 27 316 15 30 332
4. 16 66 444 16 34 290
5. 19 149 584 17 46 373

 9000b–ethip6- 
ip6scale2m-tg-ndrpdr

 1.  0.28      20.00 
2. 0.28 20.00

3. 20 40 351 20 38 351
4. 20 48 382 21 41 357
5. 22 80 463 22 47 386

 imix–ethip6- 
ip6scale2m-tg-ndrpdr

 1.  0.74       2.22 
2. 0.75 2.24