2n-icx-xxv710

2n1l-25ge2p1xxv710-af-xdp-ethip4-ip4base-mrr

RFC2544: Pkt throughput IPv4 routing test cases

  • [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 is configured with IPv4. routing and two static IPv4 /24 route entries. DUT1 is tested with with Intel-XXV710.

  • [Ver] TG vefication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 64b-2t1c-af- 
xdp-ethip4-ip4base-mrr

 [1.30, 1.33, 1.33, 1.30, 1.48, 1.82, 1.83, 1.82, 1.82, 1.83] 

 64b-4t2c-af- 
xdp-ethip4-ip4base-mrr

 [3.02, 2.99, 3.07, 3.00, 3.01, 2.94, 3.06, 3.03, 3.00, 3.04] 

 64b-8t4c-af- 
xdp-ethip4-ip4base-mrr

 [6.39, 6.42, 6.40, 6.38, 6.41, 6.42, 6.11, 4.34, 4.32, 4.34] 

2n1l-25ge2p1xxv710-af-xdp-ethip4-ip4scale20k-mrr

RFC2544: Pkt throughput IPv4 routing test cases

  • [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 is configured with IPv4 routing and 2x10k static IPv4 /32 route entries. DUT1 is tested with Intel-XXV710.

  • [Ver] TG vefication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUT1. TG traffic profile contains two L3 flow-groups (flow-group per direction, 10k flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 64b-2t1c-af- 
xdp-ethip4-ip4scale20k-mrr

 [1.22, 1.22, 1.22, 1.22, 1.24, 1.22, 1.25, 1.23, 1.21, 1.22] 

 64b-4t2c-af- 
xdp-ethip4-ip4scale20k-mrr

 [3.31, 3.33, 3.41, 3.38, 3.37, 3.32, 3.37, 3.37, 3.32, 3.35] 

 64b-8t4c-af- 
xdp-ethip4-ip4scale20k-mrr

 [8.73, 8.83, 8.83, 8.80, 8.83, 8.82, 8.79, 8.75, 8.78, 8.76] 

2n1l-25ge2p1xxv710-af-xdp-ethip4-ip4scale20k-rnd-mrr

RFC2544: Pkt throughput IPv4 routing test cases

  • [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 is configured with IPv4 routing and 2x10k static IPv4 /32 route entries. DUT1 is tested with Intel-XXV710.

  • [Ver] TG vefication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUT1. TG traffic profile contains 2 randomized L3 flow-groups (flow-group per direction, 10k flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 64b-2t1c-af-xdp- 
ethip4-ip4scale20k-rnd-mrr

 [1.20, 1.24, 1.22, 1.22, 1.22, 1.26, 1.25, 1.21, 1.23, 1.20] 

 64b-4t2c-af-xdp- 
ethip4-ip4scale20k-rnd-mrr

 [2.55, 2.60, 2.62, 2.61, 2.57, 2.61, 2.60, 2.55, 2.79, 2.83] 

 64b-8t4c-af-xdp- 
ethip4-ip4scale20k-rnd-mrr

 [8.87, 8.91, 8.88, 8.87, 8.87, 8.90, 8.92, 8.91, 8.90, 8.89] 

2n1l-25ge2p1xxv710-avf-ethip4-ip4base-mrr

RFC2544: Pkt throughput IPv4 routing test cases

  • [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 is configured with IPv4. routing and two static IPv4 /24 route entries. DUT1 is tested with with Intel-XXV710.

  • [Ver] TG vefication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 64b-2t1c-avf- 
ethip4-ip4base-mrr

 [33.73, 33.76, 33.71, 33.68, 33.66, 33.60, 33.69, 33.71, 33.64, 33.67] 

 64b-4t2c-avf- 
ethip4-ip4base-mrr

 [35.31, 36.51, 35.74, 35.37, 35.52, 35.51, 35.89, 35.33, 35.50, 35.74] 

 64b-8t4c-avf- 
ethip4-ip4base-mrr

 [30.35, 30.47, 30.34, 30.48, 30.37, 30.36, 30.39, 30.40, 30.42, 30.42] 

2n1l-25ge2p1xxv710-avf-ethip4-ip4scale200k-mrr

RFC2544: Pkt throughput IPv4 routing test cases

  • [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 is configured with IPv4 routing and 2x100k static IPv4 /32 route entries. DUT1 is tested with Intel-XXV710.

  • [Ver] TG vefication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUT1. TG traffic profile contains two L3 flow-groups (flow-group per direction, 100k flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 64b-2t1c-avf- 
ethip4-ip4scale200k-mrr

 [29.99, 29.92, 29.82, 29.62, 29.55, 29.52, 29.41, 29.33, 29.29, 29.26] 

 64b-4t2c-avf- 
ethip4-ip4scale200k-mrr

 [37.02, 36.54, 36.79, 36.74, 36.43, 36.12, 36.05, 36.23, 36.26, 36.49] 

2n1l-25ge2p1xxv710-avf-ethip4-ip4scale200k-rnd-mrr

RFC2544: Pkt throughput IPv4 routing test cases

  • [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 is configured with IPv4 routing and 2x100k static IPv4 /32 route entries. DUT1 is tested with Intel-XXV710.

  • [Ver] TG vefication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUT1. TG traffic profile contains 2 randomized L3 flow-groups (flow-group per direction, 100k flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 64b-2t1c-avf- 
ethip4-ip4scale200k-rnd-mrr

 [27.74, 27.68, 28.07, 27.61, 27.72, 27.51, 27.71, 28.09, 28.32, 28.08] 

 64b-4t2c-avf- 
ethip4-ip4scale200k-rnd-mrr

 [37.03, 36.23, 36.00, 36.67, 36.29, 36.35, 36.19, 36.22, 36.08, 36.18] 

 64b-8t4c-avf- 
ethip4-ip4scale200k-rnd-mrr

 [30.88, 31.00, 30.80, 30.76, 30.70, 30.70, 31.10, 30.62, 30.72, 30.77] 

2n1l-25ge2p1xxv710-avf-ethip4-ip4scale20k-mrr

RFC2544: Pkt throughput IPv4 routing test cases

  • [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 is configured with IPv4 routing and 2x10k static IPv4 /32 route entries. DUT1 is tested with Intel-XXV710.

  • [Ver] TG vefication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUT1. TG traffic profile contains two L3 flow-groups (flow-group per direction, 10k flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 64b-2t1c-avf- 
ethip4-ip4scale20k-mrr

 [30.05, 30.21, 30.06, 30.00, 30.12, 30.13, 30.07, 30.16, 30.11, 30.07] 

 64b-4t2c-avf- 
ethip4-ip4scale20k-mrr

 [36.14, 36.25, 36.24, 36.17, 36.17, 36.14, 36.04, 36.15, 36.44, 36.08] 

 64b-8t4c-avf- 
ethip4-ip4scale20k-mrr

 [30.63, 30.54, 30.57, 30.74, 30.62, 30.51, 30.67, 30.50, 30.65, 30.68] 

2n1l-25ge2p1xxv710-avf-ethip4-ip4scale20k-rnd-mrr

RFC2544: Pkt throughput IPv4 routing test cases

  • [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 is configured with IPv4 routing and 2x10k static IPv4 /32 route entries. DUT1 is tested with Intel-XXV710.

  • [Ver] TG vefication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUT1. TG traffic profile contains 2 randomized L3 flow-groups (flow-group per direction, 10k flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 64b-2t1c-avf- 
ethip4-ip4scale20k-rnd-mrr

 [29.06, 29.54, 29.31, 29.26, 29.22, 29.63, 29.37, 29.40, 29.25, 29.24] 

 64b-4t2c-avf- 
ethip4-ip4scale20k-rnd-mrr

 [36.05, 35.93, 36.10, 35.98, 36.02, 36.06, 35.98, 36.25, 36.08, 36.28] 

 64b-8t4c-avf- 
ethip4-ip4scale20k-rnd-mrr

 [30.83, 30.69, 30.61, 30.85, 30.71, 30.73, 30.63, 30.74, 30.74, 30.76] 

2n1l-25ge2p1xxv710-avf-ethip4-ip4scale2m-mrr

RFC2544: Pkt throughput IPv4 routing test cases

  • [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 is configured with IPv4 routing and 2x1M static IPv4 /32 route entries. DUT1 is tested with Intel-XXV710.

  • [Ver] TG vefication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUT1. TG traffic profile contains two L3 flow-groups (flow-group per direction, 1M flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 64b-2t1c-avf- 
ethip4-ip4scale2m-mrr

 [25.65, 25.69, 25.67, 25.73, 25.74, 25.86, 25.86, 25.92, 25.75, 25.74] 

 64b-4t2c-avf- 
ethip4-ip4scale2m-mrr

 [36.83, 36.88, 36.82, 36.86, 36.88, 36.93, 36.94, 36.81, 36.81, 36.87] 

 64b-8t4c-avf- 
ethip4-ip4scale2m-mrr

 [31.52, 30.94, 31.38, 31.33, 31.31, 31.22, 31.07, 31.24, 31.36, 31.03] 

2n1l-25ge2p1xxv710-avf-ethip4-ip4scale2m-rnd-mrr

RFC2544: Pkt throughput IPv4 routing test cases

  • [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 is configured with IPv4 routing and 2x1M static IPv4 /32 route entries. DUT1 is tested with Intel-XXV710.

  • [Ver] TG vefication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUT1. TG traffic profile contains 2 randomized L3 flow-groups (flow-group per direction, 1M flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 64b-2t1c-avf- 
ethip4-ip4scale2m-rnd-mrr

 [20.72, 21.03, 21.10, 21.09, 20.93, 20.90, 21.07, 21.03, 20.82, 20.88] 

 64b-4t2c-avf- 
ethip4-ip4scale2m-rnd-mrr

 [37.31, 37.31, 37.26, 37.39, 37.29, 37.39, 37.22, 37.37, 37.22, 37.33] 

 64b-8t4c-avf- 
ethip4-ip4scale2m-rnd-mrr

 [31.82, 31.38, 31.43, 31.51, 31.50, 31.61, 31.61, 31.60, 31.54, 31.75] 

2n1l-25ge2p1xxv710-avf-ethip4tcp-ip4base-h1024-p63-s64512-cps-mrr

CPS on empty TCP transactions with IPv4 routing

  • [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4-TCP for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 is configured with IPv4. routing and two static IPv4 /24 route entries. DUT1 is tested with with Intel-XXV710.

  • [Ver] TG vefication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contain L7 flows (${cps} bi-directional TCP flows) with all packets containing Ethernet header, IPv4 header with TCP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 64b-2t1c-avf-ethip4tcp-ip4base- 
h1024-p63-s64512-cps-mrr

 [2.89, 2.62, 2.73, 2.46, 2.52, 2.71, 2.55, 2.37, 2.59, 2.60] 

 64b-4t2c-avf-ethip4tcp-ip4base- 
h1024-p63-s64512-cps-mrr

 [2.45, 2.43, 2.32, 2.30, 2.42, 2.27, 2.39, 2.37, 2.32, 2.42] 

 64b-8t4c-avf-ethip4tcp-ip4base- 
h1024-p63-s64512-cps-mrr

 [2.44, 2.41, 2.55, 2.29, 2.25, 2.38, 2.27, 2.48, 2.41, 2.39] 

2n1l-25ge2p1xxv710-avf-ethip4tcp-ip4base-h16384-p63-s1032192-cps-mrr

CPS on empty TCP transactions with IPv4 routing

  • [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4-TCP for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 is configured with IPv4. routing and two static IPv4 /24 route entries. DUT1 is tested with with Intel-XXV710.

  • [Ver] TG vefication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contain L7 flows (${cps} bi-directional TCP flows) with all packets containing Ethernet header, IPv4 header with TCP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 64b-2t1c-avf-ethip4tcp-ip4base- 
h16384-p63-s1032192-cps-mrr

 [2.71, 2.71, 2.70, 2.70, 2.69, 2.69, 2.70, 2.71, 2.70, 2.72] 

 64b-4t2c-avf-ethip4tcp-ip4base- 
h16384-p63-s1032192-cps-mrr

 [2.70, 2.70, 2.69, 2.69, 2.69, 2.70, 2.69, 2.71, 2.69, 2.69] 

 64b-8t4c-avf-ethip4tcp-ip4base- 
h16384-p63-s1032192-cps-mrr

 [2.71, 2.69, 2.69, 2.68, 2.71, 2.69, 2.69, 2.70, 2.70, 2.69] 

2n1l-25ge2p1xxv710-avf-ethip4tcp-ip4base-h65536-p63-s4128768-cps-mrr

CPS on empty TCP transactions with IPv4 routing

  • [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4-TCP for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 is configured with IPv4. routing and two static IPv4 /24 route entries. DUT1 is tested with with Intel-XXV710.

  • [Ver] TG vefication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contain L7 flows (${cps} bi-directional TCP flows) with all packets containing Ethernet header, IPv4 header with TCP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 64b-2t1c-avf-ethip4tcp-ip4base- 
h65536-p63-s4128768-cps-mrr

 [2.43, 2.43, 2.43, 2.43, 2.43, 2.43, 2.43, 2.43, 2.43, 2.43] 

 64b-4t2c-avf-ethip4tcp-ip4base- 
h65536-p63-s4128768-cps-mrr

 [2.42, 2.42, 2.42, 2.42, 2.42, 2.42, 2.42, 2.42, 2.42, 2.42] 

 64b-8t4c-avf-ethip4tcp-ip4base- 
h65536-p63-s4128768-cps-mrr

 [2.43, 2.42, 2.42, 2.42, 2.41, 2.42, 2.42, 2.42, 2.42, 2.43] 

2n1l-25ge2p1xxv710-avf-ethip4tcp-nat44ed-h1024-p63-s64512-cps-mrr

CPS on empty TCP transactions with NAT44ED

  • [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4-TCP for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 is configured with IPv4 routing and one static IPv4 /18 route entries. DUT1 is tested with Intel-XXV710.

  • [Ver] TG vefication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contain L7 flows (${cps} bi-directional TCP flows) with all packets containing Ethernet header, IPv4 header with TCP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: Benchmarking Methodology for Network Security Device Performance (draft-ietf-bmwg-ngfw-performance-03).

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 64b-2t1c-avf-ethip4tcp-nat44ed- 
h1024-p63-s64512-cps-mrr

 [0.09, 0.09, 0.09, 0.09, 0.09, 0.09, 0.09, 0.09, 0.09, 0.09] 

 64b-4t2c-avf-ethip4tcp-nat44ed- 
h1024-p63-s64512-cps-mrr

 [0.15, 0.15, 0.15, 0.16, 0.15, 0.16, 0.15, 0.15, 0.15, 0.15] 

 64b-8t4c-avf-ethip4tcp-nat44ed- 
h1024-p63-s64512-cps-mrr

 [2.34, 2.25, 2.25, 2.26, 2.37, 2.25, 2.26, 2.38, 2.25, 2.41] 

2n1l-25ge2p1xxv710-avf-ethip4tcp-nat44ed-h1024-p63-s64512-tput-mrr

TPUT on lightweight TCP transactions with NAT44ED

  • [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4-TCP for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 is configured with IPv4. routing and two static IPv4 /24 route entries. DUT1 is tested with with Intel-XXV710.

  • [Ver] TG vefication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains client and server ASTF programs, generating packets containing Ethernet header, IPv4 header, TCP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 64b-2t1c-avf-ethip4tcp-nat44ed- 
h1024-p63-s64512-tput-mrr

 [1.09, 5.66, 5.67, 5.68, 1.14, 5.69, 5.73, 5.67, 1.13, 5.65] 

 64b-4t2c-avf-ethip4tcp-nat44ed- 
h1024-p63-s64512-tput-mrr

 [5.68, 5.66, 5.62, 5.63, 5.68, 1.87, 5.57, 5.68, 1.08, 5.64] 

 64b-8t4c-avf-ethip4tcp-nat44ed- 
h1024-p63-s64512-tput-mrr

 [5.70, 5.59, 5.64, 5.68, 5.68, 1.11, 5.63, 5.64, 5.68, 5.63] 

2n1l-25ge2p1xxv710-avf-ethip4tcp-nat44ed-h16384-p63-s1032192-cps-mrr

CPS on empty TCP transactions with NAT44ED

  • [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4-TCP for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 is configured with IPv4 routing and one static IPv4 /18 route entries. DUT1 is tested with Intel-XXV710.

  • [Ver] TG vefication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contain L7 flows (${cps} bi-directional TCP flows) with all packets containing Ethernet header, IPv4 header with TCP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: Benchmarking Methodology for Network Security Device Performance (draft-ietf-bmwg-ngfw-performance-03).

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 64b-2t1c-avf-ethip4tcp-nat44ed- 
h16384-p63-s1032192-cps-mrr

 [0.52, 0.52, 0.52, 0.52, 0.53, 0.52, 0.53, 0.53, 0.53, 0.53] 

 64b-4t2c-avf-ethip4tcp-nat44ed- 
h16384-p63-s1032192-cps-mrr

 [0.93, 0.92, 0.93, 0.93, 0.94, 0.94, 0.94, 0.93, 0.93, 0.93] 

 64b-8t4c-avf-ethip4tcp-nat44ed- 
h16384-p63-s1032192-cps-mrr

 [2.42, 2.42, 2.42, 2.41, 2.41, 2.42, 2.42, 2.41, 2.41, 2.41] 

2n1l-25ge2p1xxv710-avf-ethip4tcp-nat44ed-h16384-p63-s1032192-tput-mrr

TPUT on lightweight TCP transactions with NAT44ED

  • [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4-TCP for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 is configured with IPv4. routing and two static IPv4 /24 route entries. DUT1 is tested with with Intel-XXV710.

  • [Ver] TG vefication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains client and server ASTF programs, generating packets containing Ethernet header, IPv4 header, TCP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 64b-2t1c-avf-ethip4tcp-nat44ed- 
h16384-p63-s1032192-tput-mrr

 [4.68, 4.34, 4.37, 4.38, 4.27, 4.32, 4.43, 4.30, 4.36, 4.25] 

 64b-4t2c-avf-ethip4tcp-nat44ed- 
h16384-p63-s1032192-tput-mrr

 [4.57, 4.31, 4.81, 4.70, 5.68, 4.36, 5.68, 5.68, 4.59, 4.57] 

 64b-8t4c-avf-ethip4tcp-nat44ed- 
h16384-p63-s1032192-tput-mrr

 [4.52, 4.38, 5.05, 4.97, 5.68, 4.63, 5.68, 5.68, 4.69, 4.75] 

2n1l-25ge2p1xxv710-avf-ethip4tcp-nat44ed-h65536-p63-s4128768-cps-mrr

CPS on empty TCP transactions with NAT44ED

  • [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4-TCP for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 is configured with IPv4 routing and one static IPv4 /18 route entries. DUT1 is tested with Intel-XXV710.

  • [Ver] TG vefication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contain L7 flows (${cps} bi-directional TCP flows) with all packets containing Ethernet header, IPv4 header with TCP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: Benchmarking Methodology for Network Security Device Performance (draft-ietf-bmwg-ngfw-performance-03).

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 64b-2t1c-avf-ethip4tcp-nat44ed- 
h65536-p63-s4128768-cps-mrr

 [0.71, 0.70, 0.71, 0.70, 0.70, 0.70, 0.70, 0.70, 0.70, 0.71] 

 64b-4t2c-avf-ethip4tcp-nat44ed- 
h65536-p63-s4128768-cps-mrr

 [1.28, 1.28, 1.27, 1.28, 1.28, 1.27, 1.27, 1.27, 1.27, 1.28] 

 64b-8t4c-avf-ethip4tcp-nat44ed- 
h65536-p63-s4128768-cps-mrr

 [2.23, 2.24, 2.24, 2.24, 2.24, 2.24, 2.24, 2.24, 2.24, 2.24] 

2n1l-25ge2p1xxv710-avf-ethip4tcp-nat44ed-h65536-p63-s4128768-tput-mrr

TPUT on lightweight TCP transactions with NAT44ED

  • [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4-TCP for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 is configured with IPv4. routing and two static IPv4 /24 route entries. DUT1 is tested with with Intel-XXV710.

  • [Ver] TG vefication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains client and server ASTF programs, generating packets containing Ethernet header, IPv4 header, TCP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 64b-2t1c-avf-ethip4tcp-nat44ed- 
h65536-p63-s4128768-tput-mrr

 [5.25, 5.24, 5.22, 5.23, 5.23, 5.23, 5.24, 5.25, 5.23, 5.22] 

 64b-4t2c-avf-ethip4tcp-nat44ed- 
h65536-p63-s4128768-tput-mrr

 [5.26, 5.26, 5.30, 5.38, 5.27, 5.38, 5.26, 5.30, 5.23, 5.26] 

 64b-8t4c-avf-ethip4tcp-nat44ed- 
h65536-p63-s4128768-tput-mrr

 [5.30, 5.29, 5.26, 5.31, 5.30, 5.40, 5.26, 5.25, 5.28, 5.25] 

2n1l-25ge2p1xxv710-avf-ethip4udp-ip4base-h1024-p63-s64512-cps-mrr

CPS on empty UDP transactions with IPv4 routing

  • [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4-UDP for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 is configured with IPv4. routing and two static IPv4 /22 route entries. DUT1 is tested with with Intel-XXV710.

  • [Ver] TG vefication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contain L7 flows (${cps} bi-directional UDP flows) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 64b-2t1c-avf-ethip4udp-ip4base- 
h1024-p63-s64512-cps-mrr

 [6.21, 5.52, 5.60, 5.18, 5.25, 5.61, 5.29, 6.36, 5.39, 5.85] 

 64b-4t2c-avf-ethip4udp-ip4base- 
h1024-p63-s64512-cps-mrr

 [5.27, 6.18, 5.96, 5.42, 5.26, 5.68, 5.53, 6.28, 5.36, 5.46] 

 64b-8t4c-avf-ethip4udp-ip4base- 
h1024-p63-s64512-cps-mrr

 [6.26, 5.73, 5.30, 5.59, 5.51, 5.69, 5.71, 5.76, 5.52, 6.40] 

2n1l-25ge2p1xxv710-avf-ethip4udp-ip4base-h16384-p63-s1032192-cps-mrr

CPS on empty UDP transactions with IPv4 routing

  • [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4-UDP for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 is configured with IPv4. routing and two static IPv4 /18 route entries. DUT1 is tested with with Intel-XXV710.

  • [Ver] TG vefication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contain L7 flows (${cps} bi-directional UDP flows) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 64b-2t1c-avf-ethip4udp-ip4base- 
h16384-p63-s1032192-cps-mrr

 [5.67, 6.55, 5.76, 6.02, 5.96, 6.02, 5.69, 5.94, 5.52, 6.23] 

 64b-4t2c-avf-ethip4udp-ip4base- 
h16384-p63-s1032192-cps-mrr

 [5.51, 6.13, 5.73, 6.03, 5.48, 5.58, 5.63, 6.13, 6.10, 6.25] 

 64b-8t4c-avf-ethip4udp-ip4base- 
h16384-p63-s1032192-cps-mrr

 [5.66, 6.15, 5.80, 5.91, 6.09, 5.91, 5.79, 5.67, 6.16, 5.94] 

2n1l-25ge2p1xxv710-avf-ethip4udp-ip4base-h65536-p63-s4128768-cps-mrr

CPS on empty UDP transactions with IPv4 routing

  • [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4-UDP for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 is configured with IPv4. routing and two static IPv4 /16 route entries. DUT1 is tested with with Intel-XXV710.

  • [Ver] TG vefication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contain L7 flows (${cps} bi-directional UDP flows) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 64b-2t1c-avf-ethip4udp-ip4base- 
h65536-p63-s4128768-cps-mrr

 [6.14, 5.57, 6.14, 6.03, 5.51, 5.78, 5.77, 5.87, 5.81, 5.59] 

 64b-4t2c-avf-ethip4udp-ip4base- 
h65536-p63-s4128768-cps-mrr

 [5.69, 6.13, 5.76, 6.27, 5.70, 6.22, 6.13, 5.57, 6.13, 5.87] 

 64b-8t4c-avf-ethip4udp-ip4base- 
h65536-p63-s4128768-cps-mrr

 [5.57, 6.09, 5.89, 5.90, 5.60, 5.88, 6.10, 5.73, 6.02, 6.09] 

2n1l-25ge2p1xxv710-avf-ethip4udp-ip4base-iacl50sf-10kflows-mrr

RFC2544: Packet throughput IPv4 test cases with ACL

  • [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4-UDP for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 is configured with IPv4 routing. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 is tested with Intel-XXV710.

  • [Ver] TG vefication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUT1. TG traffic profile contains two L3 flow-groups (flow-group per direction, 10k flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 64b-2t1c-avf-ethip4udp- 
ip4base-iacl50sf-10kflows-mrr

 [19.82, 19.80, 19.81, 19.80, 19.78, 19.76, 19.70, 19.74, 19.82, 19.80] 

 64b-4t2c-avf-ethip4udp- 
ip4base-iacl50sf-10kflows-mrr

 [37.19, 37.34, 37.30, 37.34, 37.35, 37.34, 37.36, 37.38, 37.32, 37.35] 

 64b-8t4c-avf-ethip4udp- 
ip4base-iacl50sf-10kflows-mrr

 [32.27, 32.02, 32.13, 31.97, 32.07, 32.74, 31.93, 32.24, 32.10, 32.65] 

2n1l-25ge2p1xxv710-avf-ethip4udp-ip4base-iacl50sl-10kflows-mrr

RFC2544: Packet throughput IPv4 test cases with ACL

  • [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4-UDP for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 is configured with IPv4 routing. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 is tested with Intel-XXV710.

  • [Ver] TG vefication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUT1. TG traffic profile contains two L3 flow-groups (flow-group per direction, 10k flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 64b-2t1c-avf-ethip4udp- 
ip4base-iacl50sl-10kflows-mrr

 [16.01, 16.01, 16.03, 16.03, 16.02, 16.07, 16.02, 16.02, 15.99, 16.02] 

 64b-4t2c-avf-ethip4udp- 
ip4base-iacl50sl-10kflows-mrr

 [25.70, 25.33, 25.07, 25.11, 25.04, 25.26, 25.48, 25.27, 25.23, 25.32] 

 64b-8t4c-avf-ethip4udp- 
ip4base-iacl50sl-10kflows-mrr

 [36.43, 36.39, 36.52, 36.50, 36.57, 36.52, 36.57, 36.26, 36.45, 36.42] 

2n1l-25ge2p1xxv710-avf-ethip4udp-ip4base-oacl50sf-10kflows-mrr

RFC2544: Packet throughput IPv4 test cases with ACL

  • [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4-UDP for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 is configured with IPv4 routing. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 is tested with Intel-XXV710.

  • [Ver] TG vefication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUT1. TG traffic profile contains two L3 flow-groups (flow-group per direction, 10k flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 64b-2t1c-avf-ethip4udp- 
ip4base-oacl50sf-10kflows-mrr

 [18.91, 18.55, 18.68, 18.66, 18.59, 18.59, 18.59, 18.72, 18.57, 18.63] 

 64b-4t2c-avf-ethip4udp- 
ip4base-oacl50sf-10kflows-mrr

 [36.57, 36.54, 36.25, 36.27, 36.02, 36.08, 35.99, 36.15, 36.20, 36.28] 

 64b-8t4c-avf-ethip4udp- 
ip4base-oacl50sf-10kflows-mrr

 [32.46, 32.56, 32.54, 32.64, 33.13, 32.43, 32.81, 32.70, 32.43, 32.33] 

2n1l-25ge2p1xxv710-avf-ethip4udp-ip4base-oacl50sl-10kflows-mrr

RFC2544: Packet throughput IPv4 test cases with ACL

  • [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4-UDP for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 is configured with IPv4 routing. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 is tested with Intel-XXV710.

  • [Ver] TG vefication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUT1. TG traffic profile contains two L3 flow-groups (flow-group per direction, 10k flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 64b-2t1c-avf-ethip4udp- 
ip4base-oacl50sl-10kflows-mrr

 [14.85, 14.80, 14.87, 14.93, 14.69, 14.68, 14.81, 14.89, 14.81, 14.72] 

 64b-4t2c-avf-ethip4udp- 
ip4base-oacl50sl-10kflows-mrr

 [28.35, 28.24, 29.18, 28.57, 28.78, 28.68, 28.43, 28.49, 28.72, 27.09] 

 64b-8t4c-avf-ethip4udp- 
ip4base-oacl50sl-10kflows-mrr

 [34.46, 34.69, 34.66, 34.62, 34.68, 34.64, 34.36, 34.55, 34.51, 34.52] 

2n1l-25ge2p1xxv710-avf-ethip4udp-nat44det-h1024-p63-s64512-mrr

RFC2544: Pkt throughput NAT44 performance test cases

  • [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4-UDP for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 is configured with IPv4 routing and two static IPv4 /22 and IPv4 /24 route entries. DUT1 is tested with Intel-XXV710.

  • [Ver] TG vefication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUT1. TG traffic profile contains two L3 flow-groups (flow-group per direction, 1 flow per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 64b-2t1c-avf-ethip4udp- 
nat44det-h1024-p63-s64512-mrr

 [13.92, 13.91, 13.93, 13.94, 13.90, 13.92, 13.91, 13.93, 13.91, 13.93] 

 64b-4t2c-avf-ethip4udp- 
nat44det-h1024-p63-s64512-mrr

 [20.30, 20.31, 20.28, 20.30, 20.29, 20.29, 20.28, 20.28, 20.31, 20.28] 

 64b-8t4c-avf-ethip4udp- 
nat44det-h1024-p63-s64512-mrr

 [22.71, 22.70, 22.70, 22.74, 22.68, 22.71, 22.69, 22.71, 22.70, 22.67] 

2n1l-25ge2p1xxv710-avf-ethip4udp-nat44det-h16384-p63-s1032192-mrr

RFC2544: Pkt throughput NAT44 performance test cases

  • [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4-UDP for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 is configured with IPv4 routing and two static IPv4 /18 and IPv4 /24 route entries. DUT1 is tested with Intel-XXV710.

  • [Ver] TG vefication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUT1. TG traffic profile contains two L3 flow-groups (flow-group per direction, 1 flow per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 64b-2t1c-avf-ethip4udp- 
nat44det-h16384-p63-s1032192-mrr

 [12.81, 12.83, 12.82, 12.81, 12.82, 12.78, 12.80, 12.81, 12.80, 12.80] 

 64b-4t2c-avf-ethip4udp- 
nat44det-h16384-p63-s1032192-mrr

 [25.08, 25.19, 25.09, 25.10, 25.11, 25.10, 25.04, 25.10, 25.08, 25.05] 

 64b-8t4c-avf-ethip4udp- 
nat44det-h16384-p63-s1032192-mrr

 [37.14, 37.09, 37.09, 37.15, 37.19, 37.10, 37.17, 37.13, 37.16, 37.03] 

2n1l-25ge2p1xxv710-avf-ethip4udp-nat44det-h65536-p63-s4128758-mrr

RFC2544: Pkt throughput NAT44 performance test cases

  • [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4-UDP for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 is configured with IPv4 routing and two static IPv4 /16 and IPv4 /24 route entries. DUT1 is tested with Intel-XXV710.

  • [Ver] TG vefication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUT1. TG traffic profile contains two L3 flow-groups (flow-group per direction, 1 flow per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 64b-2t1c-avf-ethip4udp- 
nat44det-h65536-p63-s4128758-mrr

 [9.98, 9.84, 10.00, 9.99, 9.94, 9.95, 9.95, 9.92, 9.83, 9.97] 

 64b-4t2c-avf-ethip4udp- 
nat44det-h65536-p63-s4128758-mrr

 [20.01, 19.74, 20.03, 19.97, 20.03, 19.99, 19.99, 20.01, 19.79, 19.94] 

 64b-8t4c-avf-ethip4udp- 
nat44det-h65536-p63-s4128758-mrr

 [33.87, 33.99, 33.89, 33.94, 33.79, 33.73, 33.79, 34.01, 33.88, 33.89] 

2n1l-25ge2p1xxv710-avf-ethip4udp-nat44ed-h1024-p63-s64512-cps-mrr

CPS on empty UDP transactions with NAT44ED

  • [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4-UDP for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 is configured with IPv4 routing and one static IPv4 /22 route entries. DUT1 is tested with Intel-XXV710.

  • [Ver] TG vefication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contain L7 flows (${cps} bi-directional UDP flows) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: Benchmarking Methodology for Network Security Device Performance (draft-ietf-bmwg-ngfw-performance-03).

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 64b-2t1c-avf-ethip4udp-nat44ed- 
h1024-p63-s64512-cps-mrr

 [1.64, 1.71, 1.80, 1.74, 1.79, 1.85, 1.78, 1.86, 1.80, 1.78] 

 64b-4t2c-avf-ethip4udp-nat44ed- 
h1024-p63-s64512-cps-mrr

 [3.14, 3.26, 3.31, 3.29, 3.32, 3.42, 3.50, 3.37, 3.39, 3.34] 

 64b-8t4c-avf-ethip4udp-nat44ed- 
h1024-p63-s64512-cps-mrr

 [5.43, 5.61, 5.64, 5.68, 5.69, 5.71, 5.54, 5.60, 5.65, 5.62] 

2n1l-25ge2p1xxv710-avf-ethip4udp-nat44ed-h1024-p63-s64512-tput-mrr

TPUT on lightweight UDP transactions with NAT44ED

  • [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4-UDP for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 is configured with IPv4. routing and two static IPv4 /24 route entries. DUT1 is tested with with Intel-XXV710.

  • [Ver] TG vefication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains client and server ASTF programs, generating packets containing Ethernet header, IPv4 header, UDP header and static MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 64b-2t1c-avf-ethip4udp-nat44ed- 
h1024-p63-s64512-tput-mrr

 [9.01, 9.18, 8.74, 10.23, 9.08, 9.34, 8.87, 9.59, 9.15, 9.80] 

 64b-4t2c-avf-ethip4udp-nat44ed- 
h1024-p63-s64512-tput-mrr

 [10.03, 9.06, 9.44, 8.96, 9.12, 9.89, 9.46, 9.51, 9.32, 9.60] 

 64b-8t4c-avf-ethip4udp-nat44ed- 
h1024-p63-s64512-tput-mrr

 [9.40, 9.90, 9.09, 8.75, 9.59, 9.02, 9.07, 9.20, 9.04, 9.09] 

2n1l-25ge2p1xxv710-avf-ethip4udp-nat44ed-h1024-p63-s64512-udir-mrr

RFC2544: Pkt throughput NAT44 endpoint-dependent mode performance test cases

  • [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4-UDP for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 is configured with IPv4 routing and one static IPv4 /8 route entries. DUT1 is tested with Intel-XXV710.

  • [Ver] TG vefication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contain L4 flows (uni-directional UDP flows) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: Benchmarking Methodology for Network Security Device Performance (draft-ietf-bmwg-ngfw-performance-03).

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 64b-2t1c-avf-ethip4udp-nat44ed- 
h1024-p63-s64512-udir-mrr

 [11.48, 11.51, 11.52, 11.53, 11.51, 11.52, 11.49, 11.51, 11.51, 11.53] 

 64b-4t2c-avf-ethip4udp-nat44ed- 
h1024-p63-s64512-udir-mrr

 [18.65, 18.70, 18.72, 18.73, 18.70, 18.72, 18.72, 18.70, 18.72, 18.70] 

 64b-8t4c-avf-ethip4udp-nat44ed- 
h1024-p63-s64512-udir-mrr

 [18.70, 18.70, 18.72, 18.70, 18.70, 18.70, 18.72, 18.70, 18.70, 18.70] 

2n1l-25ge2p1xxv710-avf-ethip4udp-nat44ed-h16384-p63-s1032192-cps-mrr

CPS on empty UDP transactions with NAT44ED

  • [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4-UDP for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 is configured with IPv4 routing and one static IPv4 /18 route entries. DUT1 is tested with Intel-XXV710.

  • [Ver] TG vefication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contain L7 flows (${cps} bi-directional UDP flows) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: Benchmarking Methodology for Network Security Device Performance (draft-ietf-bmwg-ngfw-performance-03).

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 64b-2t1c-avf-ethip4udp-nat44ed- 
h16384-p63-s1032192-cps-mrr

 [1.22, 1.29, 1.34, 1.32, 1.37, 1.35, 1.33, 1.34, 1.38, 1.33] 

 64b-4t2c-avf-ethip4udp-nat44ed- 
h16384-p63-s1032192-cps-mrr

 [2.18, 2.27, 2.26, 2.24, 2.27, 2.24, 2.22, 2.28, 2.23, 2.23] 

 64b-8t4c-avf-ethip4udp-nat44ed- 
h16384-p63-s1032192-cps-mrr

 [4.47, 4.39, 4.41, 4.40, 4.49, 4.49, 4.47, 4.48, 4.45, 4.40] 

2n1l-25ge2p1xxv710-avf-ethip4udp-nat44ed-h16384-p63-s1032192-tput-mrr

TPUT on lightweight UDP transactions with NAT44ED

  • [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4-UDP for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 is configured with IPv4. routing and two static IPv4 /24 route entries. DUT1 is tested with with Intel-XXV710.

  • [Ver] TG vefication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains client and server ASTF programs, generating packets containing Ethernet header, IPv4 header, UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 64b-2t1c-avf-ethip4udp-nat44ed- 
h16384-p63-s1032192-tput-mrr

 [9.39, 9.38, 9.06, 9.29, 9.45, 8.94, 9.79, 8.74, 9.00, 8.91] 

 64b-4t2c-avf-ethip4udp-nat44ed- 
h16384-p63-s1032192-tput-mrr

 [8.92, 9.12, 9.50, 9.01, 8.99, 9.02, 9.02, 8.92, 9.03, 8.94] 

 64b-8t4c-avf-ethip4udp-nat44ed- 
h16384-p63-s1032192-tput-mrr

 [9.26, 9.03, 9.31, 9.14, 8.92, 8.95, 9.20, 9.21, 9.18, 9.14] 

2n1l-25ge2p1xxv710-avf-ethip4udp-nat44ed-h65536-p63-s4128768-cps-mrr

CPS on empty UDP transactions with NAT44ED

  • [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4-UDP for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 is configured with IPv4 routing and one static IPv4 /16 route entries. DUT1 is tested with Intel-XXV710.

  • [Ver] TG vefication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contain L7 flows (${cps} bi-directional UDP flows) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: Benchmarking Methodology for Network Security Device Performance (draft-ietf-bmwg-ngfw-performance-03).

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 64b-2t1c-avf-ethip4udp-nat44ed- 
h65536-p63-s4128768-cps-mrr

 [1.13, 1.16, 1.15, 1.13, 1.14, 1.12, 1.13, 1.14, 1.14, 1.13] 

 64b-8t4c-avf-ethip4udp-nat44ed- 
h65536-p63-s4128768-cps-mrr

 [4.01, 4.05, 4.04, 4.03, 4.05, 4.05, 4.01, 4.06, 4.05, 4.05] 

2n1l-25ge2p1xxv710-avf-ethip4udp-nat44ed-h65536-p63-s4128768-tput-mrr

TPUT on lightweight UDP transactions with NAT44ED

  • [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4-UDP for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 is configured with IPv4. routing and two static IPv4 /24 route entries. DUT1 is tested with with Intel-XXV710.

  • [Ver] TG vefication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains client and server ASTF programs, generating packets containing Ethernet header, IPv4 header, UDP header and static MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 64b-2t1c-avf-ethip4udp-nat44ed- 
h65536-p63-s4128768-tput-mrr

 [9.40, 8.90, 9.40, 8.92, 9.07, 9.01, 9.31, 8.97, 9.03, 9.45] 

 64b-4t2c-avf-ethip4udp-nat44ed- 
h65536-p63-s4128768-tput-mrr

 [8.93, 9.02, 8.73, 9.04, 9.25, 8.99, 9.13, 8.95, 9.25, 8.92] 

 64b-8t4c-avf-ethip4udp-nat44ed- 
h65536-p63-s4128768-tput-mrr

 [9.05, 8.92, 9.14, 9.39, 9.42, 9.30, 8.97, 9.15, 9.21, 8.90] 

2n1l-25ge2p1xxv710-ethip4-ip4base-mrr

RFC2544: Pkt throughput IPv4 routing test cases

  • [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 is configured with IPv4. routing and two static IPv4 /24 route entries. DUT1 is tested with with Intel-XXV710.

  • [Ver] TG vefication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 64b-2t1c-ethip4-ip4base-mrr 

 [24.42, 24.41, 24.56, 24.33, 24.44, 24.42, 24.49, 24.18, 24.46, 24.41] 

 64b-4t2c-ethip4-ip4base-mrr 

 [36.43, 36.57, 36.53, 36.35, 36.57, 36.43, 36.55, 36.55, 36.34, 36.57] 

 64b-8t4c-ethip4-ip4base-mrr 

 [29.95, 30.37, 30.48, 30.35, 29.80, 29.88, 29.80, 30.37, 30.17, 29.92] 

2n1l-25ge2p1xxv710-ethip4-ip4scale20k-mrr

RFC2544: Pkt throughput IPv4 routing test cases

  • [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 is configured with IPv4 routing and 2x10k static IPv4 /32 route entries. DUT1 is tested with Intel-XXV710.

  • [Ver] TG vefication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUT1. TG traffic profile contains two L3 flow-groups (flow-group per direction, 10k flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 64b-2t1c- 
ethip4-ip4scale20k-mrr

 [21.90, 21.96, 21.82, 21.85, 21.99, 21.82, 21.76, 21.90, 21.77, 21.80] 

 64b-4t2c- 
ethip4-ip4scale20k-mrr

 [37.08, 36.60, 36.45, 36.33, 36.33, 36.36, 36.28, 36.35, 36.33, 36.63] 

 64b-8t4c- 
ethip4-ip4scale20k-mrr

 [30.06, 30.10, 29.85, 30.20, 30.03, 29.91, 30.07, 30.01, 29.77, 30.07] 

2n1l-25ge2p1xxv710-ethip4-ip4scale20k-rnd-mrr

RFC2544: Pkt throughput IPv4 routing test cases

  • [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 is configured with IPv4 routing and 2x10k static IPv4 /32 route entries. DUT1 is tested with Intel-XXV710.

  • [Ver] TG vefication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUT1. TG traffic profile contains 2 randomized L3 flow-groups (flow-group per direction, 10k flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Maximum Receive Rate trial [Mpps] 

 64b-2t1c-ethip4- 
ip4scale20k-rnd-mrr

 [21.49, 21.49, 21.48, 21.48, 21.45, 21.50, 21.47, 21.62, 21.70, 21.50] 

 64b-4t2c-ethip4- 
ip4scale20k-rnd-mrr

 [36.74, 36.11, 36.23, 36.18, 36.06, 36.11, 36.03, 36.13, 36.03, 36.25] 

 64b-8t4c-ethip4- 
ip4scale20k-rnd-mrr

 [30.76, 30.38, 30.34, 30.42, 30.45, 30.56, 31.26, 30.42, 30.34, 30.17]