ip6

2n1l-10ge2p1x710-ethip6-ip6base-adlalwlistbase-scapy

2n1l-10ge2p1x710-ethip6-ip6base-adlalwlistbase-scapy

ADL Security IPv6 allowlist test cases

  • [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv6 on all links.

  • [Cfg] DUT configuration: DUT1 is configured with IPv6 routing and static routes. ADL security allowlists are applied on DUT1 ingress interface from TG.

  • [Ver] TG verification: Test IPv6 packets are sent in one direction by TG on link to DUT1; on receive TG verifies packets for correctness and drops as applicable.

  • [Ref] Applicable standard specifications:

 Test Name 

 Status 

 78b-0c-ethip6- 
ip6base-adlalwlistbase-scapy

PASS

2n1l-10ge2p1x710-ethip6-ip6base-adlblklistbase-scapy

2n1l-10ge2p1x710-ethip6-ip6base-adlblklistbase-scapy

ADL Security IPv6 allowlist test cases

  • [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv6 on all links.

  • [Cfg] DUT configuration: DUT1 is configured with IPv6 routing and static routes. ADL security allowlists are applied on DUT1 ingress interface from TG.

  • [Ver] TG verification: Test IPv6 packets are sent in one direction by TG on link to DUT1; on receive TG verifies packets for correctness and drops as applicable.

  • [Ref] Applicable standard specifications:

 Test Name 

 Status 

 78b-0c-ethip6- 
ip6base-adlblklistbase-scapy

PASS

2n1l-10ge2p1x710-ethip6-ip6base-iacldstbase-scapy

2n1l-10ge2p1x710-ethip6-ip6base-iacldstbase-scapy

IPv6 iAcl whitelist test cases

  • [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv6 on all links.

  • [Cfg] DUT configuration: DUT1 is configured with IPv6 routing static routes. IPv6 iAcl security whitelist is applied on DUT1 ingress interface from TG.

  • [Ver] TG verification: Test IPv6 packets are sent in one direction by TG on link to DUT1; on receive TG verifies packets for correctness and drops as applicable.

  • [Ref] Applicable standard specifications:

 Test Name 

 Status 

 78b-0c-ethip6- 
ip6base-iacldstbase-scapy

PASS

2n1l-10ge2p1x710-ethip6-ip6base-ipolicemarkbase-scapy

2n1l-10ge2p1x710-ethip6-ip6base-ipolicemarkbase-scapy

IPv4 policer test cases

  • [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv6 on all links.

  • [Cfg] DUT configuration: On DUT1 configure interfaces IPv6 addresses and static ARP record on the second interface. On DUT1 configure 2R3C color-aware policer on the first interface.

  • [Ver] TG verification: Test packet is sent from TG on the first link to DUT1. Packet is received on TG on the second link from DUT1.

  • [Ref] Applicable standard specifications: RFC2474, RFC2697, RFC2698.

 Test Name 

 Status 

 78b-0c-ethip6- 
ip6base-ipolicemarkbase-scapy

PASS

2n1l-10ge2p1x710-ethip6-ip6base-scapy

2n1l-10ge2p1x710-ethip6-ip6base-scapy

IPv6 routing test cases

  • [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv6 for IPv6 routing on both links.

  • [Cfg] DUT configuration: DUT1 is configured with IPv6 routing two static IPv6 /64 route entries.

  • [Ver] TG verification: Test IPv6 packet is sent in one direction by TG on links to DUT1; on receive TG verifies packet for correctness and their IPv6 src-addr, dst-addr and MAC addresses.

  • [Ref] Applicable standard specifications: RFC2460, RFC4443, RFC4861.

 Test Name 

 Status 

 78b-0c-ethip6-ip6base-scapy 

PASS