srv6¶
2n1l-10ge2p1x710-ethip6ip6-ip6base-srv6enc1sid-scapy¶
2n1l-10ge2p1x710-ethip6ip6-ip6base-srv6enc1sid-scapy¶
Segment routing over IPv6 dataplane with one SID (SRH not inserted) test suite. [Top] Network topologies: TG-DUT1 2-node topology with one link between nodes. [Cfg] DUT configuration: On DUT1 configure physical interface IPv6 addresses, static ARP record, route and IPv6 forwarding over SRv6 with one SID - Segment Routing Header not inserted. [Ver] TG verification: ETH-IP6 packet is sent from TG to DUT1 in one direction. Packet is received and verified for correctness on TG. Then ETH-IP6-IP6 packet is sent from TG in opposite direction. Packet is received and verified for correctness on TG. [Ref] Applicable standard specifications: SRv6 Network Programming - draft 3.
|
|
---|---|
|
|
2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-scapy¶
2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-scapy¶
Segment routing over IPv6 dataplane with two SIDs (SRH inserted) test suite. [Top] Network topologies: TG-DUT1 2-node topology with one link between nodes. [Cfg] DUT configuration: On DUT1 configure physical interface IPv6 addresses, static ARP record, route and IPv6 forwarding over SRv6 with two SIDs - Segment Routing Header inserted. [Ver] TG verification: ETH-IP6 packet is sent from TG to DUT1 in one direction. Packet is received and verified for correctness on TG. Then ETH-IP6-IP6 packet is sent from TG in opposite direction. Packet is received and verified for correctness on TG. [Ref] Applicable standard specifications: SRv6 Network Programming - draft 3.
|
|
---|---|
|
|
2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6enc2sids-scapy¶
2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6enc2sids-scapy¶
Segment routing over IPv6 dataplane with two SIDs (SRH inserted) test suite. [Top] Network topologies: TG-DUT1 2-node topology with one link between nodes. [Cfg] DUT configuration: On DUT1 configure physical interface IPv6 addresses, static ARP record, route and IPv6 forwarding over SRv6 with two SIDs - Segment Routing Header inserted. [Ver] TG verification: ETH-IP6 packet is sent from TG to DUT1 in one direction. Packet is received and verified for correctness on TG. Then ETH-IP6-IP6 packet is sent from TG in opposite direction. Packet is received and verified for correctness on TG. [Ref] Applicable standard specifications: SRv6 Network Programming - draft 3.
|
|
---|---|
|
|
2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-dyn-scapy¶
2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-dyn-scapy¶
Segment routing over IPv6 dataplane with Dynamic SRv6 proxy test suite. [Top] Network topologies: TG-DUT1 2-node topology with one link between nodes. [Cfg] DUT configuration: On DUT1 configure physical interface IPv6 addresses, static ARP record, route and IPv6 forwarding over SRv6 with three SIDs - Segment Routing Header inserted. [Ver] TG verification: ETH-IP6 packet is sent from TG to DUT1 in one direction. Packet is received and verified for correctness on TG. Then ETH-IP6-IP6 packet is sent from TG in opposite direction. Packet is received and verified for correctness on TG. [Ref] Applicable standard specifications: SRv6 Network Programming - draft 3.
|
|
---|---|
|
|
2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-masq-scapy¶
2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-masq-scapy¶
Segment routing over IPv6 dataplane with Masquerading SRv6 proxy test cases [Top] Network topologies: TG-DUT1 2-node topology with one link between nodes. [Cfg] DUT configuration: On DUT1 configure physical interface IPv6 addresses, static ARP record, route and IPv6 forwarding over SRv6 with three SIDs - Segment Routing Header inserted. [Ver] TG verification: ETH-IP6 packet is sent from TG to DUT1 in one direction. Packet is received and verified for correctness on TG. Then ETH-IP6-IP6 packet is sent from TG in opposite direction. Packet is received and verified for correctness on TG. [Ref] Applicable standard specifications: SRv6 Network Programming - draft 3.
|
|
---|---|
|
|
2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-stat-scapy¶
2n1l-10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-stat-scapy¶
Segment routing over IPv6 dataplane with Static SRv6 proxy test cases. [Top] Network topologies: TG-DUT1 2-node topology with one link between nodes. [Cfg] DUT configuration: On DUT1 configure physical interface IPv6 addresses, static ARP record, route and IPv6 forwarding over SRv6 with three SIDs - Segment Routing Header inserted. [Ver] TG verification: ETH-IP6 packet is sent from TG to DUT1 in one direction. Packet is received and verified for correctness on TG. Then ETH-IP6-IP6 packet is sent from TG in opposite direction. Packet is received and verified for correctness on TG. [Ref] Applicable standard specifications: SRv6 Network Programming - draft 3.
|
|
---|---|
|
|