2n-tx2-xl710¶
2n1l-40ge2p1xl710-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-mrr¶
RFC2544: Pkt throughput IPv4 IPsec tunnel mode.
[Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv4 on TG-DUT1, Eth-IPv4-IPSec on DUT1-TG
[Cfg] DUT configuration: DUT1 is configured with multiple IPsec tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it and sends back to TG.
[Ver] TG veriffication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains one L3 flow-groups (number of flows per flow-group equals to number of IPSec tunnels) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces. Incrementing of IP.dst (IPv4 destination address) field is applied to the stream.
[Ref] Applicable standard specifications: RFC4303 and RFC2544.
|
|
---|---|
|
|
|
|
|
|
|
|
|
|
2n1l-40ge2p1xl710-ethip4ipsec10000tnlsw-ip4base-int-aes128gcm-udir-mrr¶
RFC2544: Pkt throughput IPv4 IPsec tunnel mode.
[Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv4 on TG-DUT1, Eth-IPv4-IPSec on DUT1-TG
[Cfg] DUT configuration: DUT1 is configured with multiple IPsec tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it and sends back to TG.
[Ver] TG veriffication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains one L3 flow-groups (number of flows per flow-group equals to number of IPSec tunnels) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces. Incrementing of IP.dst (IPv4 destination address) field is applied to the stream.
[Ref] Applicable standard specifications: RFC4303 and RFC2544.
|
|
---|---|
|
|
|
|
|
|
|
|
|
|
|
|
2n1l-40ge2p1xl710-ethip4ipsec10000tnlsw-ip4base-int-aes256gcm-udir-mrr¶
RFC2544: Pkt throughput IPv4 IPsec tunnel mode.
[Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv4 on TG-DUT1, Eth-IPv4-IPSec on DUT1-TG
[Cfg] DUT configuration: DUT1 is configured with multiple IPsec tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it and sends back to TG.
[Ver] TG veriffication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains one L3 flow-groups (number of flows per flow-group equals to number of IPSec tunnels) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces. Incrementing of IP.dst (IPv4 destination address) field is applied to the stream.
[Ref] Applicable standard specifications: RFC4303 and RFC2544.
|
|
---|---|
|
|
|
|
|
|
|
|
|
|
|
|
2n1l-40ge2p1xl710-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-mrr¶
RFC2544: Pkt throughput IPv4 IPsec tunnel mode.
[Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv4 on TG-DUT1, Eth-IPv4-IPSec on DUT1-TG
[Cfg] DUT configuration: DUT1 is configured with multiple IPsec tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it and sends back to TG.
[Ver] TG veriffication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains one L3 flow-groups (number of flows per flow-group equals to number of IPSec tunnels) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces. Incrementing of IP.dst (IPv4 destination address) field is applied to the stream.
[Ref] Applicable standard specifications: RFC4303 and RFC2544.
|
|
---|---|
|
|
|
|
|
|
|
|
|
|
|
|
2n1l-40ge2p1xl710-ethip4ipsec1000tnlsw-ip4base-int-aes128gcm-udir-mrr¶
RFC2544: Pkt throughput IPv4 IPsec tunnel mode.
[Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv4 on TG-DUT1, Eth-IPv4-IPSec on DUT1-TG
[Cfg] DUT configuration: DUT1 is configured with multiple IPsec tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it and sends back to TG.
[Ver] TG veriffication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains one L3 flow-groups (number of flows per flow-group equals to number of IPSec tunnels) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces. Incrementing of IP.dst (IPv4 destination address) field is applied to the stream.
[Ref] Applicable standard specifications: RFC4303 and RFC2544.
|
|
---|---|
|
|
|
|
|
|
|
|
|
|
|
|
2n1l-40ge2p1xl710-ethip4ipsec1000tnlsw-ip4base-int-aes256gcm-udir-mrr¶
RFC2544: Pkt throughput IPv4 IPsec tunnel mode.
[Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv4 on TG-DUT1, Eth-IPv4-IPSec on DUT1-TG
[Cfg] DUT configuration: DUT1 is configured with multiple IPsec tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it and sends back to TG.
[Ver] TG veriffication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains one L3 flow-groups (number of flows per flow-group equals to number of IPSec tunnels) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces. Incrementing of IP.dst (IPv4 destination address) field is applied to the stream.
[Ref] Applicable standard specifications: RFC4303 and RFC2544.
|
|
---|---|
|
|
|
|
|
|
|
|
|
|
|
|
2n1l-40ge2p1xl710-ethip4ipsec1000tnlsw-ip4base-policy-aes256gcm-udir-mrr¶
RFC2544: Pkt throughput IPv4 IPsec tunnel mode.
[Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv4 on TG-DUT1, Eth-IPv4-IPSec on DUT1-TG
[Cfg] DUT configuration: DUT1 is configured with multiple IPsec tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it and sends back to TG.
[Ver] TG veriffication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains one L3 flow-groups (number of flows per flow-group equals to number of IPSec tunnels) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces. Incrementing of IP.dst (IPv4 destination address) field is applied to the stream.
[Ref] Applicable standard specifications: RFC4303 and RFC2544.
|
|
---|---|
|
|
|
|
|
|
2n1l-40ge2p1xl710-ethip4ipsec1tnlsw-ip4base-policy-aes256gcm-udir-mrr¶
RFC2544: Pkt throughput IPv4 IPsec tunnel mode.
[Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv4 on TG-DUT1, Eth-IPv4-IPSec on DUT1-TG
[Cfg] DUT configuration: DUT1 is configured with multiple IPsec tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it and sends back to TG.
[Ver] TG veriffication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains one L3 flow-groups (number of flows per flow-group equals to number of IPSec tunnels) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces. Incrementing of IP.dst (IPv4 destination address) field is applied to the stream.
[Ref] Applicable standard specifications: RFC4303 and RFC2544.
|
|
---|---|
|
|
|
|
|
|
2n1l-40ge2p1xl710-ethip4ipsec40tnlsw-ip4base-policy-aes256gcm-udir-mrr¶
RFC2544: Pkt throughput IPv4 IPsec tunnel mode.
[Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv4 on TG-DUT1, Eth-IPv4-IPSec on DUT1-TG
[Cfg] DUT configuration: DUT1 is configured with multiple IPsec tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it and sends back to TG.
[Ver] TG veriffication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains one L3 flow-groups (number of flows per flow-group equals to number of IPSec tunnels) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces. Incrementing of IP.dst (IPv4 destination address) field is applied to the stream.
[Ref] Applicable standard specifications: RFC4303 and RFC2544.
|
|
---|---|
|
|
|
|
|
|
2n1l-40ge2p1xl710-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-mrr¶
RFC2544: Pkt throughput IPv4 IPsec tunnel mode.
[Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv4 on TG-DUT1, Eth-IPv4-IPSec on DUT1-TG
[Cfg] DUT configuration: DUT1 is configured with multiple IPsec tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it and sends back to TG.
[Ver] TG veriffication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains one L3 flow-groups (number of flows per flow-group equals to number of IPSec tunnels) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces. Incrementing of IP.dst (IPv4 destination address) field is applied to the stream.
[Ref] Applicable standard specifications: RFC4303 and RFC2544.
|
|
---|---|
|
|
|
|
|
|
|
|
|
|
|
|
2n1l-40ge2p1xl710-ethip4ipsec4tnlsw-ip4base-int-aes128gcm-udir-mrr¶
RFC2544: Pkt throughput IPv4 IPsec tunnel mode.
[Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv4 on TG-DUT1, Eth-IPv4-IPSec on DUT1-TG
[Cfg] DUT configuration: DUT1 is configured with multiple IPsec tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it and sends back to TG.
[Ver] TG veriffication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains one L3 flow-groups (number of flows per flow-group equals to number of IPSec tunnels) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces. Incrementing of IP.dst (IPv4 destination address) field is applied to the stream.
[Ref] Applicable standard specifications: RFC4303 and RFC2544.
|
|
---|---|
|
|
|
|
|
|
|
|
|
|
|
|
2n1l-40ge2p1xl710-ethip4ipsec4tnlsw-ip4base-int-aes256gcm-udir-mrr¶
RFC2544: Pkt throughput IPv4 IPsec tunnel mode.
[Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv4 on TG-DUT1, Eth-IPv4-IPSec on DUT1-TG
[Cfg] DUT configuration: DUT1 is configured with multiple IPsec tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it and sends back to TG.
[Ver] TG veriffication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains one L3 flow-groups (number of flows per flow-group equals to number of IPSec tunnels) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces. Incrementing of IP.dst (IPv4 destination address) field is applied to the stream.
[Ref] Applicable standard specifications: RFC4303 and RFC2544.
|
|
---|---|
|
|
|
|
|
|
|
|
|
|
|
|