.. |br| raw:: html
.. |prein| raw:: html


.. |preout| raw:: html

    
3n-skx-xxv710 ````````````` 25ge2p1xxv710-avf-ethip6lispip4-ip6base-ndrpdr '''''''''''''''''''''''''''''''''''''''''''''' **RFC6830: Pkt throughput Lisp test cases** - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes. - **[Enc] Packet Encapsulations:** Eth-IPv6-LISP-IPv4 on DUT1-DUT2, Eth-IPv6 on TG-DUTn for IPv6 routing over LISPoIPv4 tunnel. - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv6 routing and static routes. LISPoIPv4 tunnel is configured between DUT1 and DUT2. DUT1 and DUT2 tested with Intel-XXV710. - **[Ver] TG verification:** TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. - **[Ref] Applicable standard specifications:** RFC6830. .. only:: html .. csv-table:: :header-rows: 1 :widths: auto :align: center :file: 25ge2p1xxv710-avf-ethip6lispip4-ip6base-ndrpdr.csv .. only:: latex .. raw:: latex \csvautolongtable{_tmp/src/detailed_test_results/vpp_performance_results_3n_skx/25ge2p1xxv710-avf-ethip6lispip4-ip6base-ndrpdr.csv} 25ge2p1xxv710-ethip6lispip4-ip6base-ndrpdr '''''''''''''''''''''''''''''''''''''''''' **RFC6830: Pkt throughput Lisp test cases** - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes. - **[Enc] Packet Encapsulations:** Eth-IPv6-LISP-IPv4 on DUT1-DUT2, Eth-IPv6 on TG-DUTn for IPv6 routing over LISPoIPv4 tunnel. - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv6 routing and static routes. LISPoIPv4 tunnel is configured between DUT1 and DUT2. DUT1 and DUT2 tested with Intel-XXV710. - **[Ver] TG verification:** TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. - **[Ref] Applicable standard specifications:** RFC6830. .. only:: html .. csv-table:: :header-rows: 1 :widths: auto :align: center :file: 25ge2p1xxv710-ethip6lispip4-ip6base-ndrpdr.csv .. only:: latex .. raw:: latex \csvautolongtable{_tmp/src/detailed_test_results/vpp_performance_results_3n_skx/25ge2p1xxv710-ethip6lispip4-ip6base-ndrpdr.csv}