.. |br| raw:: html
.. |prein| raw:: html


.. |preout| raw:: html

    
3n-skx-xxv710 ````````````` 25ge2p1xxv710-avf-ethip4lispip4-ip4base-ndrpdr '''''''''''''''''''''''''''''''''''''''''''''' **RFC2544: Pkt throughput Lisp test cases** - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes. - **[Enc] Packet Encapsulations:** Eth-IPv4-LISP-IPv4 on DUT1-DUT2, Eth-IPv4 on TG-DUTn for IPv4 routing over LISPoIPv4 tunnel. - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4 routing and static routes. LISPoIPv4 tunnel is configured between DUT1 and DUT2. DUT1 and DUT2 tested with Intel-XXV710. - **[Ver] TG verification:** TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces. - **[Ref] Applicable standard specifications:** RFC6830. .. only:: html .. csv-table:: :header-rows: 1 :widths: auto :align: center :file: 25ge2p1xxv710-avf-ethip4lispip4-ip4base-ndrpdr.csv .. only:: latex .. raw:: latex \csvautolongtable{_tmp/src/detailed_test_results/vpp_performance_results_3n_skx/25ge2p1xxv710-avf-ethip4lispip4-ip4base-ndrpdr.csv} 25ge2p1xxv710-avf-ethip4lispip6-ip4base-ndrpdr '''''''''''''''''''''''''''''''''''''''''''''' **RFC2544: Pkt throughput Lisp test cases** - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes. - **[Enc] Packet Encapsulations:** Eth-IPv4-LISP-IPv6 on DUT1-DUT2, Eth-IPv4 on TG-DUTn for IPv4 routing over LISPoIPv6 tunnel. - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4 routing and static routes. LISPoIPv6 tunnel is configured between DUT1 and DUT2. DUT1 and DUT2 tested with Intel-XXV710. - **[Ver] TG verification:** TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces. - **[Ref] Applicable standard specifications:** RFC6830. .. only:: html .. csv-table:: :header-rows: 1 :widths: auto :align: center :file: 25ge2p1xxv710-avf-ethip4lispip6-ip4base-ndrpdr.csv .. only:: latex .. raw:: latex \csvautolongtable{_tmp/src/detailed_test_results/vpp_performance_results_3n_skx/25ge2p1xxv710-avf-ethip4lispip6-ip4base-ndrpdr.csv} 25ge2p1xxv710-avf-ethip4vxlan-l2bdbasemaclrn-ndrpdr ''''''''''''''''''''''''''''''''''''''''''''''''''' **RFC2544: Pkt throughput L2BD with VXLANoIPv4 test cases** - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes. - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4 on TG-DUTn. Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUTs. - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with L2 bridge domain. VXLAN tunnels are configured between L2BDs on DUT1 and DUT2. DUT1 and DUT2 tested with Intel-XXV710. - **[Ver] TG verification:** TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces. - **[Ref] Applicable standard specifications:** RFC2544, RFC7348. .. only:: html .. csv-table:: :header-rows: 1 :widths: auto :align: center :file: 25ge2p1xxv710-avf-ethip4vxlan-l2bdbasemaclrn-ndrpdr.csv .. only:: latex .. raw:: latex \csvautolongtable{_tmp/src/detailed_test_results/vpp_performance_results_3n_skx/25ge2p1xxv710-avf-ethip4vxlan-l2bdbasemaclrn-ndrpdr.csv} 25ge2p1xxv710-avf-ethip4vxlan-l2xcbase-ndrpdr ''''''''''''''''''''''''''''''''''''''''''''' **RFC2544: Pkt throughput L2XC with VXLANoIPv4 test cases** - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes. - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 cross-connect on TG-DUTn. Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUT1 and DUT2. - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with L2 cross- connect. VXLAN tunnels are configured between L2XCs on DUT1 and DUT2. DUT1 and DUT2 tested with Intel-XXV710. - **[Ver] TG verification:** TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces. - **[Ref] Applicable standard specifications:** RFC2544, RFC7348. .. only:: html .. csv-table:: :header-rows: 1 :widths: auto :align: center :file: 25ge2p1xxv710-avf-ethip4vxlan-l2xcbase-ndrpdr.csv .. only:: latex .. raw:: latex \csvautolongtable{_tmp/src/detailed_test_results/vpp_performance_results_3n_skx/25ge2p1xxv710-avf-ethip4vxlan-l2xcbase-ndrpdr.csv} 25ge2p1xxv710-ethip4lispip4-ip4base-ndrpdr '''''''''''''''''''''''''''''''''''''''''' **RFC2544: Pkt throughput Lisp test cases** - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes. - **[Enc] Packet Encapsulations:** Eth-IPv4-LISP-IPv4 on DUT1-DUT2, Eth-IPv4 on TG-DUTn for IPv4 routing over LISPoIPv4 tunnel. - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4 routing and static routes. LISPoIPv4 tunnel is configured between DUT1 and DUT2. DUT1 and DUT2 tested with Intel-XXV710. - **[Ver] TG verification:** TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces. - **[Ref] Applicable standard specifications:** RFC6830. .. only:: html .. csv-table:: :header-rows: 1 :widths: auto :align: center :file: 25ge2p1xxv710-ethip4lispip4-ip4base-ndrpdr.csv .. only:: latex .. raw:: latex \csvautolongtable{_tmp/src/detailed_test_results/vpp_performance_results_3n_skx/25ge2p1xxv710-ethip4lispip4-ip4base-ndrpdr.csv} 25ge2p1xxv710-ethip4lispip6-ip4base-ndrpdr '''''''''''''''''''''''''''''''''''''''''' **RFC2544: Pkt throughput Lisp test cases** - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes. - **[Enc] Packet Encapsulations:** Eth-IPv4-LISP-IPv6 on DUT1-DUT2, Eth-IPv4 on TG-DUTn for IPv4 routing over LISPoIPv6 tunnel. - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4 routing and static routes. LISPoIPv6 tunnel is configured between DUT1 and DUT2. DUT1 and DUT2 tested with Intel-XXV710. - **[Ver] TG verification:** TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces. - **[Ref] Applicable standard specifications:** RFC6830. .. only:: html .. csv-table:: :header-rows: 1 :widths: auto :align: center :file: 25ge2p1xxv710-ethip4lispip6-ip4base-ndrpdr.csv .. only:: latex .. raw:: latex \csvautolongtable{_tmp/src/detailed_test_results/vpp_performance_results_3n_skx/25ge2p1xxv710-ethip4lispip6-ip4base-ndrpdr.csv} 25ge2p1xxv710-ethip4vxlan-l2bdbasemaclrn-ndrpdr ''''''''''''''''''''''''''''''''''''''''''''''' **RFC2544: Pkt throughput L2BD with VXLANoIPv4 test cases** - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes. - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4 on TG-DUTn. Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUTs. - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with L2 bridge domain. VXLAN tunnels are configured between L2BDs on DUT1 and DUT2. DUT1 and DUT2 tested with Intel-XXV710. - **[Ver] TG verification:** TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces. - **[Ref] Applicable standard specifications:** RFC2544, RFC7348. .. only:: html .. csv-table:: :header-rows: 1 :widths: auto :align: center :file: 25ge2p1xxv710-ethip4vxlan-l2bdbasemaclrn-ndrpdr.csv .. only:: latex .. raw:: latex \csvautolongtable{_tmp/src/detailed_test_results/vpp_performance_results_3n_skx/25ge2p1xxv710-ethip4vxlan-l2bdbasemaclrn-ndrpdr.csv} 25ge2p1xxv710-ethip4vxlan-l2xcbase-ndrpdr ''''''''''''''''''''''''''''''''''''''''' **RFC2544: Pkt throughput L2XC with VXLANoIPv4 test cases** - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes. - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 cross-connect on TG-DUTn. Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUT1 and DUT2. - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with L2 cross- connect. VXLAN tunnels are configured between L2XCs on DUT1 and DUT2. DUT1 and DUT2 tested with Intel-XXV710. - **[Ver] TG verification:** TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces. - **[Ref] Applicable standard specifications:** RFC2544, RFC7348. .. only:: html .. csv-table:: :header-rows: 1 :widths: auto :align: center :file: 25ge2p1xxv710-ethip4vxlan-l2xcbase-ndrpdr.csv .. only:: latex .. raw:: latex \csvautolongtable{_tmp/src/detailed_test_results/vpp_performance_results_3n_skx/25ge2p1xxv710-ethip4vxlan-l2xcbase-ndrpdr.csv}