5.1. ip4¶
5.1.1. 1n1l-10ge2p1x710-ethip4-ip4base-tg-ndrpdr suite¶
RFC2544: Pkt throughput for cross connected NICs with IPv4 traffic profile. *[Top] Network Topologies: TG-TG 1-node circular topologywith single links between nodes. [Enc] Packet Encapsulations: Eth-IPv4 for L1 cross connect patch. [Ver] TG verification: TG finds and reports throughput NDR (Non DropRate) with zero packet loss tolerance and throughput PDR (Partial DropRate) with non-zero packet loss tolerance (LT) expressed in percentageof packets transmitted. NDR and PDR are discovered for differentEthernet L2 frame sizes using MLRsearch library.Test packets are generated by TG on links to TG.TG traffic profile contains two L3 flow-groups (flow-group perdirection, 254 flows per flow-group) with all packets containingEthernet header, IPv4 header with static payload.MAC addresses are matching MAC addresses of the TG node interfaces. [Ref] Applicable standard specifications: RFC2544.
# Copyright (c) 2021 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
*** Settings ***
| Resource | resources/libraries/robot/shared/default.robot
|
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | TREX | ETH | N2N | BASE | TG_DRV_IGB_UIO
| ... | ethip4-ip4base-tg
|
| Suite Setup | Setup suite topology interfaces with no DUT | performance_tg_nic
| Suite Teardown | Tear down suite | performance
| Test Teardown | Tear down test raw | performance
|
| Test Template | Local Template
|
| *** Variables ***
| ${nic_name}= | Intel-X710
| ${nic_pfs}= | 2
| ${osi_layer}= | L2
| ${overhead}= | ${0}
# Traffic profile:
| ${traffic_profile}= | trex-stl-2n-ethip4-ip4src2545.1.1.1. Local Template¶
[Cfg] TG runs L1 cross connect config. [Ver] Measure NDR and PDR values using MLRsearch algorithm.Arguments: - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). Type: integer, string
Set Test Variable \${frame_size}
Given Set Max Rate And Jumbo
Then Find NDR and PDR intervals using optimized search
5.1.1.2. 64B–ethip4-ip4base-tg-ndrpdr¶
frame_size=${64}
5.1.1.3. 1518B–ethip4-ip4base-tg-ndrpdr¶
frame_size=${1518}
5.1.1.4. 9000B–ethip4-ip4base-tg-ndrpdr¶
frame_size=${9000}
5.1.1.5. IMIX–ethip4-ip4base-tg-ndrpdr¶
frame_size=IMIX_v4_1
5.1.2. 1n1l-10ge2p1x710-ethip4-ip4scale2m-tg-ndrpdr suite¶
RFC2544: Pkt throughput for cross connected NICs with IPv4 traffic profile. *[Top] Network Topologies: TG-TG 1-node circular topologywith single links between. [Enc] Packet Encapsulations: Eth-IPv4 for L1 cross connect patch. [Ver] TG verification: TG finds and reports throughput NDR (Non DropRate) with zero packet loss tolerance and throughput PDR (Partial DropRate) with non-zero packet loss tolerance (LT) expressed in percentageof packets transmitted. NDR and PDR are discovered for differentEthernet L2 frame sizes using MLRsearch library.Test packets are generated by TG on links to TG.TG traffic profile contains two L3 flow-groups (flow-group perdirection, 1M flows per flow-group) with all packets containingEthernet header, IPv4 header with IP protocol=61 and static payload.MAC addresses are matching MAC addresses of the TG node interfaces. [Ref] Applicable standard specifications: RFC2544.
# Copyright (c) 2021 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
*** Settings ***
| Resource | resources/libraries/robot/shared/default.robot
|
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | TREX | ETH | IP4SCALE2M | N2N | SCALE | TG_DRV_IGB_UIO
| ... | ethip4-ip4scale2m-tg
|
| Suite Setup | Setup suite topology interfaces with no DUT | performance_tg_nic
| Suite Teardown | Tear down suite | performance
| Test Teardown | Tear down test raw | performance
|
| Test Template | Local Template
|
| *** Variables ***
| ${nic_name}= | Intel-X710
| ${nic_pfs}= | 2
| ${osi_layer}= | L2
| ${overhead}= | ${0}
| ${rts_per_flow}= | ${1000000}
# Traffic profile
| ${traffic_profile}= | trex-stl-2n-ethip4-ip4dst${rts_per_flow}
5.1.2.1. Local Template¶
[Cfg] TG runs L1 cross connect config. [Ver] Measure NDR and PDR values using MLRsearch algorithm.Arguments: - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). Type: integer, string
Set Test Variable \${frame_size}
Given Set Max Rate And Jumbo
Then Find NDR and PDR intervals using optimized search
5.1.2.2. 64B–ethip4-ip4scale2m-tg-ndrpdr¶
frame_size=${64}
5.1.2.3. 1518B–ethip4-ip4scale2m-tg-ndrpdr¶
frame_size=${1518}
5.1.2.4. 9000B–ethip4-ip4scale2m-tg-ndrpdr¶
frame_size=${9000}
5.1.2.5. IMIX–ethip4-ip4scale2m-tg-ndrpdr¶
frame_size=IMIX_v4_1
5.1.3. 1n1l-10ge2p1x710-ethip4tcp-ip4base-h1024-p63-s64512-cps-tg-ndrpdr suite¶
CPS on empty TCP transactions with L1 cross connect [Top] Network Topologies: TG-TG 1-node circular topologywith single links between nodes. [Enc] Packet Encapsulations: Eth-IPv4 for L1 cross connect patch. [Ver] TG verification: TG finds and reports throughput NDR (Non DropRate) with zero packet loss tolerance and throughput PDR (Partial DropRate) with non-zero packet loss tolerance (LT) expressed in percentageof packets transmitted. NDR and PDR are discovered for differentEthernet L2 frame sizes using MLRsearch library.Test packets are generated by TG on links to TG.TG traffic profile contain L7 flows (${cps} bi-directional TCP flows)with all packets containing Ethernet header, IPv4 header with TCPheader and static payload.MAC addresses are matching MAC addresses of the TG node interfaces. [Ref] Applicable standard specifications: RFC2544.
# Copyright (c) 2021 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
*** Settings ***
| Resource | resources/libraries/robot/shared/default.robot
|
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | TREX | ETH | IP4FWD | IP4BASE | N2N | TCP | TCP_CPS
| ... | TG_DRV_IGB_UIO | SCALE | HOSTS_1024
| ... | ethip4tcp-ip4base-h1024-p63-s64512-cps-tg
|
| Suite Setup | Setup suite topology interfaces with no DUT | performance_tg_nic
| Suite Teardown | Tear down suite | performance
| Test Teardown | Tear down test raw | performance
|
| Test Template | Local Template
|
| *** Variables ***
| ${nic_name}= | Intel-X710
| ${nic_pfs}= | 2
| ${osi_layer}= | L7
| ${overhead}= | ${0}
# Scale settings
| ${n_hosts}= | ${1024}
| ${n_ports}= | ${63}
| ${transaction_scale}= | ${${n_hosts} * ${n_ports}}
| ${packets_per_transaction_and_direction}= | ${4}
| ${packets_per_transaction_aggregated}= | ${7}
# Traffic profile
| ${traffic_profile}= | trex-astf-ethip4tcp-${n_hosts}h
| ${transaction_type}= | tcp_cps
| ${disable_latency}= | ${True}
5.1.3.1. Local Template¶
[Cfg] TG runs L1 cross connect config. [Ver] Measure NDR and PDR values using MLRsearch algorithm.Arguments: - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). Type: integer, string
Set Test Variable \${frame_size}
Given Set Max Rate And Jumbo
Then Find NDR and PDR intervals using optimized search
5.1.3.2. 64B–ethip4tcp-ip4base-h1024-p63-s64512-cps-tg-ndrpdr¶
frame_size=${64}
5.1.4. 1n1l-10ge2p1x710-ethip4tcp-ip4base-h1024-p63-s64512-pps-tg-ndrpdr suite¶
PPS on lightweight TCP transactions with L1 cross connect [Top] Network Topologies: TG-TG 1-node circular topologywith single links between nodes. [Enc] Packet Encapsulations: Eth-IPv4 for L1 cross connect patch. [Ver] TG verification: TG finds and reports throughput NDR (Non DropRate) with zero packet loss tolerance and throughput PDR (Partial DropRate) with non-zero packet loss tolerance (LT) expressed in percentageof packets transmitted. NDR and PDR are discovered for differentEthernet L2 frame sizes using MLRsearch library.Test packets are generated by TG on links to TG.TG traffic profile contains client and server ASTF programs,generating packets containing Ethernet header, IPv4 header,TCP header and static payload.MAC addresses are matching MAC addresses of the TG node interfaces. [Ref] Applicable standard specifications: RFC2544.
# Copyright (c) 2021 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
*** Settings ***
| Resource | resources/libraries/robot/shared/default.robot
|
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | TREX | ETH | IP4FWD | IP4BASE | N2N | TCP | TCP_PPS
| ... | TG_DRV_IGB_UIO | SCALE | HOSTS_1024
| ... | ethip4tcp-ip4base-h1024-p63-s64512-pps-tg
|
| Suite Setup | Setup suite topology interfaces with no DUT | performance_tg_nic
| Suite Teardown | Tear down suite | performance
| Test Teardown | Tear down test raw | performance
|
| Test Template | Local Template
|
| # TODO CSIT-1765: Unify suite Documentation.
| *** Variables ***
| ${nic_name}= | Intel-X710
| ${nic_pfs}= | 2
| ${osi_layer}= | L7
| ${overhead}= | ${0}
# Scale settings
| ${n_hosts}= | ${1024}
| ${n_ports}= | ${63}
| ${packets_per_transaction_and_direction}= | ${11}
| ${transaction_scale}= | ${${n_hosts} * ${n_ports}}
# Traffic profile:
| ${traffic_profile}= | trex-astf-ethip4tcp-${n_hosts}h-pps
| ${transaction_type}= | tcp_pps
| ${disable_latency}= | ${True}
5.1.4.1. Local Template¶
[Cfg] TG runs L1 cross connect config. [Ver] Measure NDR and PDR values using MLRsearch algorithm.Arguments: - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). Type: integer, string
Set Test Variable \${frame_size}
Given Set Max Rate And Jumbo
Then Find NDR and PDR intervals using optimized search
5.1.4.2. 64B–ethip4tcp-ip4base-h1024-p63-s64512-pps-tg-ndrpdr¶
frame_size=${64}
5.1.5. 1n1l-10ge2p1x710-ethip4tcp-ip4base-h262144-p63-s16515072-cps-tg-ndrpdr suite¶
CPS on empty TCP transactions with L1 cross connect [Top] Network Topologies: TG-TG 1-node circular topologywith single links between nodes. [Enc] Packet Encapsulations: Eth-IPv4 for L1 cross connect patch. [Ver] TG verification: TG finds and reports throughput NDR (Non DropRate) with zero packet loss tolerance and throughput PDR (Partial DropRate) with non-zero packet loss tolerance (LT) expressed in percentageof packets transmitted. NDR and PDR are discovered for differentEthernet L2 frame sizes using MLRsearch library.Test packets are generated by TG on links to TG.TG traffic profile contain L7 flows (${cps} bi-directional TCP flows)with all packets containing Ethernet header, IPv4 header with TCPheader and static payload.MAC addresses are matching MAC addresses of the TG node interfaces. [Ref] Applicable standard specifications: RFC2544.
# Copyright (c) 2021 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
*** Settings ***
| Resource | resources/libraries/robot/shared/default.robot
|
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | TREX | ETH | IP4FWD | IP4BASE | N2N | TCP | TCP_CPS
| ... | TG_DRV_IGB_UIO | SCALE | HOSTS_262144
| ... | ethip4tcp-ip4base-h262144-p63-s16515072-cps-tg
|
| Suite Setup | Setup suite topology interfaces with no DUT | performance_tg_nic
| Suite Teardown | Tear down suite | performance
| Test Teardown | Tear down test raw | performance
|
| Test Template | Local Template
|
| *** Variables ***
| ${nic_name}= | Intel-X710
| ${nic_pfs}= | 2
| ${osi_layer}= | L7
| ${overhead}= | ${0}
# Scale settings
| ${n_hosts}= | ${262144}
| ${n_ports}= | ${63}
| ${transaction_scale}= | ${${n_hosts} * ${n_ports}}
| ${packets_per_transaction_and_direction}= | ${4}
| ${packets_per_transaction_aggregated}= | ${7}
# Traffic profile
| ${traffic_profile}= | trex-astf-ethip4tcp-${n_hosts}h
| ${transaction_type}= | tcp_cps
| ${disable_latency}= | ${True}
5.1.5.1. Local Template¶
[Cfg] TG runs L1 cross connect config. [Ver] Measure NDR and PDR values using MLRsearch algorithm.Arguments: - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). Type: integer, string
Set Test Variable \${frame_size}
Given Set Max Rate And Jumbo
Then Find NDR and PDR intervals using optimized search
5.1.5.2. 64B–ethip4tcp-ip4base-h262144-p63-s16515072-cps-tg-ndrpdr¶
frame_size=${64}
5.1.6. 1n1l-10ge2p1x710-ethip4tcp-ip4base-h262144-p63-s16515072-pps-tg-ndrpdr suite¶
PPS on lightweight TCP transactions with L1 cross connect [Top] Network Topologies: TG-TG 1-node circular topologywith single links between nodes. [Enc] Packet Encapsulations: Eth-IPv4 for L1 cross connect patch. [Ver] TG verification: TG finds and reports throughput NDR (Non DropRate) with zero packet loss tolerance and throughput PDR (Partial DropRate) with non-zero packet loss tolerance (LT) expressed in percentageof packets transmitted. NDR and PDR are discovered for differentEthernet L2 frame sizes using MLRsearch library.Test packets are generated by TG on links to TG.TG traffic profile contains client and server ASTF programs,generating packets containing Ethernet header, IPv4 header,TCP header and static payload.MAC addresses are matching MAC addresses of the TG node interfaces. [Ref] Applicable standard specifications: RFC2544.
# Copyright (c) 2021 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
*** Settings ***
| Resource | resources/libraries/robot/shared/default.robot
|
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | TREX | ETH | IP4FWD | IP4BASE | N2N | TCP | TCP_PPS
| ... | TG_DRV_IGB_UIO | SCALE | HOSTS_262144
| ... | ethip4tcp-ip4base-h262144-p63-s16515072-pps-tg
|
| Suite Setup | Setup suite topology interfaces with no DUT | performance_tg_nic
| Suite Teardown | Tear down suite | performance
| Test Teardown | Tear down test raw | performance
|
| Test Template | Local Template
|
| # TODO CSIT-1765: Unify suite Documentation.
| *** Variables ***
| ${nic_name}= | Intel-X710
| ${nic_pfs}= | 2
| ${osi_layer}= | L7
| ${overhead}= | ${0}
# Scale settings
| ${n_hosts}= | ${262144}
| ${n_ports}= | ${63}
| ${packets_per_transaction_and_direction}= | ${11}
| ${transaction_scale}= | ${${n_hosts} * ${n_ports}}
# Traffic profile:
| ${traffic_profile}= | trex-astf-ethip4tcp-${n_hosts}h-pps
| ${transaction_type}= | tcp_pps
| ${disable_latency}= | ${True}
5.1.6.1. Local Template¶
[Cfg] TG runs L1 cross connect config. [Ver] Measure NDR and PDR values using MLRsearch algorithm.Arguments: - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). Type: integer, string
Set Test Variable \${frame_size}
Given Set Max Rate And Jumbo
Then Find NDR and PDR intervals using optimized search
5.1.6.2. 64B–ethip4tcp-ip4base-h262144-p63-s16515072-pps-tg-ndrpdr¶
frame_size=${64}
5.1.7. 1n1l-10ge2p1x710-ethip4udp-ip4base-h1024-p63-s64512-cps-tg-ndrpdr suite¶
CPS on empty UDP transactions with L1 cross connect [Top] Network Topologies: TG-TG 1-node circular topologywith single links between nodes. [Enc] Packet Encapsulations: Eth-IPv4 for L1 cross connect patch. [Ver] TG verification: TG finds and reports throughput NDR (Non DropRate) with zero packet loss tolerance and throughput PDR (Partial DropRate) with non-zero packet loss tolerance (LT) expressed in percentageof packets transmitted. NDR and PDR are discovered for differentEthernet L2 frame sizes using MLRsearch library.Test packets are generated by TG on links to TG.TG traffic profile contain L7 flows (${cps} bi-directional UDP flows)with all packets containing Ethernet header, IPv4 header with UDPheader and static payload.MAC addresses are matching MAC addresses of the TG node interfaces. [Ref] Applicable standard specifications: RFC2544.
# Copyright (c) 2021 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
*** Settings ***
| Resource | resources/libraries/robot/shared/default.robot
|
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | TREX | ETH | IP4FWD | N2N | SCALE | IP4BASE
| ... | TG_DRV_IGB_UIO | UDP | UDP_CPS | HOSTS_1024
| ... | ethip4udp-ip4base-h1024-p63-s64512-cps-tg
|
| Suite Setup | Setup suite topology interfaces with no DUT | performance_tg_nic
| Suite Teardown | Tear down suite | performance
| Test Teardown | Tear down test raw | performance
|
| Test Template | Local Template
|
| *** Variables ***
| ${nic_name}= | Intel-X710
| ${nic_pfs}= | 2
| ${osi_layer}= | L7
| ${overhead}= | ${0}
# Scale settings
| ${n_hosts}= | ${1024}
| ${n_ports}= | ${63}
| ${transaction_scale}= | ${${n_hosts} * ${n_ports}}
# Traffic profile
| ${traffic_profile}= | trex-astf-ethip4udp-${n_hosts}h
| ${transaction_type}= | udp_cps
| ${disable_latency}= | ${True}
5.1.7.1. Local Template¶
[Cfg] TG runs L1 cross connect config. [Ver] Measure NDR and PDR values using MLRsearch algorithm.Arguments: - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). Type: integer, string
Set Test Variable \${frame_size}
Given Set Max Rate And Jumbo
Then Find NDR and PDR intervals using optimized search
5.1.7.2. 64B–ethip4udp-ip4base-h1024-p63-s64512-cps-tg-ndrpdr¶
frame_size=${64}
5.1.8. 1n1l-10ge2p1x710-ethip4udp-ip4base-h1024-p63-s64512-pps-tg-ndrpdr suite¶
PPS on lightweight UDP transactions with L1 cross connect [Top] Network Topologies: TG-TG 1-node circular topologywith single links between nodes. [Enc] Packet Encapsulations: Eth-IPv4 for L1 cross connect patch. [Ver] TG verification: TG finds and reports throughput NDR (Non DropRate) with zero packet loss tolerance and throughput PDR (Partial DropRate) with non-zero packet loss tolerance (LT) expressed in percentageof packets transmitted. NDR and PDR are discovered for differentEthernet L2 frame sizes using MLRsearch library.Test packets are generated by TG on links to TG.TG traffic profile contains client and server ASTF programs,generating packets containing Ethernet header, IPv4 header,UDP header and static payload.MAC addresses are matching MAC addresses of the TG node interfaces. [Ref] Applicable standard specifications: RFC2544.
# Copyright (c) 2021 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
*** Settings ***
| Resource | resources/libraries/robot/shared/default.robot
|
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | TREX | ETH | IP4FWD | N2N | IP4BASE | UDP | UDP_PPS
| ... | TG_DRV_IGB_UIO | SCALE | HOSTS_1024
| ... | ethip4udp-ip4base-h1024-p63-s64512-pps-tg
|
| Suite Setup | Setup suite topology interfaces with no DUT | performance_tg_nic
| Suite Teardown | Tear down suite | performance
| Test Teardown | Tear down test raw | performance
|
| Test Template | Local Template
|
| # TODO CSIT-1765: Unify suite Documentation.
| *** Variables ***
| ${nic_name}= | Intel-X710
| ${nic_pfs}= | 2
| ${osi_layer}= | L7
| ${overhead}= | ${0}
# Scale settings
| ${n_hosts}= | ${1024}
| ${n_ports}= | ${63}
| ${transaction_scale}= | ${${n_hosts} * ${n_ports}}
| ${packets_per_transaction_and_direction}= | ${33}
# Traffic profile:
| ${traffic_profile}= | trex-astf-ethip4udp-${n_hosts}h-pps
| ${transaction_type}= | udp_pps
| ${disable_latency}= | ${True}
5.1.8.1. Local Template¶
[Cfg] TG runs L1 cross connect config. [Ver] Measure NDR and PDR values using MLRsearch algorithm.Arguments: - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). Type: integer, string
Set Test Variable \${frame_size}
Given Set Max Rate And Jumbo
Then Find NDR and PDR intervals using optimized search
5.1.8.2. 64B–ethip4udp-ip4base-h1024-p63-s64512-pps-tg-ndrpdr¶
frame_size=${64}
5.1.9. 1n1l-10ge2p1x710-ethip4udp-ip4base-h262144-p63-s16515072-cps-tg-ndrpdr suite¶
CPS on empty UDP transactions with L1 cross connect [Top] Network Topologies: TG-TG 1-node circular topologywith single links between nodes. [Enc] Packet Encapsulations: Eth-IPv4 for L1 cross connect patch. [Ver] TG verification: TG finds and reports throughput NDR (Non DropRate) with zero packet loss tolerance and throughput PDR (Partial DropRate) with non-zero packet loss tolerance (LT) expressed in percentageof packets transmitted. NDR and PDR are discovered for differentEthernet L2 frame sizes using MLRsearch library.Test packets are generated by TG on links to TG.TG traffic profile contain L7 flows (${cps} bi-directional UDP flows)with all packets containing Ethernet header, IPv4 header with UDPheader and static payload.MAC addresses are matching MAC addresses of the TG node interfaces. [Ref] Applicable standard specifications: RFC2544.
# Copyright (c) 2021 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
*** Settings ***
| Resource | resources/libraries/robot/shared/default.robot
|
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | TREX | ETH | IP4FWD | N2N | SCALE | IP4BASE
| ... | TG_DRV_IGB_UIO | UDP | UDP_CPS | HOSTS_262144
| ... | ethip4udp-ip4base-h262144-p63-s16515072-cps-tg
|
| Suite Setup | Setup suite topology interfaces with no DUT | performance_tg_nic
| Suite Teardown | Tear down suite | performance
| Test Teardown | Tear down test raw | performance
|
| Test Template | Local Template
|
| *** Variables ***
| ${nic_name}= | Intel-X710
| ${nic_pfs}= | 2
| ${osi_layer}= | L7
| ${overhead}= | ${0}
# Scale settings
| ${n_hosts}= | ${262144}
| ${n_ports}= | ${63}
| ${transaction_scale}= | ${${n_hosts} * ${n_ports}}
# Traffic profile
| ${traffic_profile}= | trex-astf-ethip4udp-${n_hosts}h
| ${transaction_type}= | udp_cps
| ${disable_latency}= | ${True}
5.1.9.1. Local Template¶
[Cfg] TG runs L1 cross connect config. [Ver] Measure NDR and PDR values using MLRsearch algorithm.Arguments: - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). Type: integer, string
Set Test Variable \${frame_size}
Given Set Max Rate And Jumbo
Then Find NDR and PDR intervals using optimized search
5.1.9.2. 64B–ethip4udp-ip4base-h262144-p63-s16515072-cps-tg-ndrpdr¶
frame_size=${64}
5.1.10. 1n1l-10ge2p1x710-ethip4udp-ip4base-h262144-p63-s16515072-pps-tg-ndrpdr suite¶
PPS on lightweight UDP transactions with L1 cross connect [Top] Network Topologies: TG-TG 1-node circular topologywith single links between nodes. [Enc] Packet Encapsulations: Eth-IPv4 for L1 cross connect patch. [Ver] TG verification: TG finds and reports throughput NDR (Non DropRate) with zero packet loss tolerance and throughput PDR (Partial DropRate) with non-zero packet loss tolerance (LT) expressed in percentageof packets transmitted. NDR and PDR are discovered for differentEthernet L2 frame sizes using MLRsearch library.Test packets are generated by TG on links to TG.TG traffic profile contains client and server ASTF programs,generating packets containing Ethernet header, IPv4 header,TCP header and static payload.MAC addresses are matching MAC addresses of the TG node interfaces. [Ref] Applicable standard specifications: RFC2544.
# Copyright (c) 2021 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
*** Settings ***
| Resource | resources/libraries/robot/shared/default.robot
|
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | TREX | ETH | IP4FWD | IP4BASE | N2N | UDP | UDP_PPS
| ... | TG_DRV_IGB_UIO | SCALE | HOSTS_262144
| ... | ethip4udp-ip4base-h262144-p63-s16515072-pps-tg
|
| Suite Setup | Setup suite topology interfaces with no DUT | performance_tg_nic
| Suite Teardown | Tear down suite | performance
| Test Teardown | Tear down test raw | performance
|
| Test Template | Local Template
|
| *** Variables ***
| ${nic_name}= | Intel-X710
| ${nic_pfs}= | 2
| ${osi_layer}= | L7
| ${overhead}= | ${0}
# Scale settings
| ${n_hosts}= | ${262144}
| ${n_ports}= | ${63}
| ${transaction_scale}= | ${${n_hosts} * ${n_ports}}
| ${packets_per_transaction_and_direction}= | ${33}
# Traffic profile:
| ${traffic_profile}= | trex-astf-ethip4udp-${n_hosts}h-pps
| ${transaction_type}= | udp_pps
| ${disable_latency}= | ${True}
5.1.10.1. Local Template¶
[Cfg] TG runs L1 cross connect config. [Ver] Measure NDR and PDR values using MLRsearch algorithm.Arguments: - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). Type: integer, string
Set Test Variable \${frame_size}
Given Set Max Rate And Jumbo
Then Find NDR and PDR intervals using optimized search
5.1.10.2. 64B–ethip4udp-ip4base-h262144-p63-s16515072-pps-tg-ndrpdr¶
frame_size=${64}