3n-tsh-x520

10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr

RFC2544: Pkt throughput L2BD test cases with vhost

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge- domain and MAC learning enabled. Qemu VNFs are connected to VPP via vhost-user interfaces. Guest is running testpmd interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is tested with Intel-X520-DA2.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 64b-1t1c-eth-l2bdbasemaclrn- 
 eth-2vhostvr1024-1vm-ndrpdr 

 1.  0.69       0.46 
 2.  0.69       0.46 
  
 3.   41   76  369        42   65  354  
 4.   64  406  719        97  436  736  
 5.  367  677  864       352  691  862  

 64b-2t2c-eth-l2bdbasemaclrn- 
 eth-2vhostvr1024-1vm-ndrpdr 

 1.  1.08       0.72 
 2.  1.09       0.73 
  
 3.   42   62  472        43   62  464  
 4.  142  570  811       115  551  780  
 5.  522  768  970       550  978 1353  

 64b-4t4c-eth-l2bdbasemaclrn- 
 eth-2vhostvr1024-1vm-ndrpdr 

 1.  1.91       1.28 
 2.  1.93       1.30 
  
 3.   42   70  383        43   65  373  
 4.   72  425  779        71  391  697  
 5.  363  715  986       390  750 1131

10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr

RFC2544: Pkt throughput L2BD test cases with vhost

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge- domain and MAC learning enabled. Qemu VNFs are connected to VPP via vhost-user interfaces. Guest is running VPP l2xc interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is tested with Intel-X520-DA2.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 64b-1t1c-eth-l2bdbasemaclrn- 
 eth-2vhostvr1024-1vm-vppl2xc-ndrpdr 

 1.  1.48       1.00 
 2.  2.31       1.56 
  
 3.   41  112  139        42   91  111  
 4.  133  213  241       126  195  219  
 5.  313  380  451       283  340  385  

 64b-2t2c-eth-l2bdbasemaclrn- 
 eth-2vhostvr1024-1vm-vppl2xc-ndrpdr 

 1.  1.00       0.67 
 2.  3.28       2.20 
  
 3.   42   84  102        42   89  105  
 4.   94  149  162        98  138  161  
 5.  223  270  301       207  245  278  

 64b-4t4c-eth-l2bdbasemaclrn- 
 eth-2vhostvr1024-1vm-vppl2xc-ndrpdr 

 1.  3.27       2.20 
 2.  4.82       3.24 
  
 3.   49  112  130        48   58   69  
 4.  100  117  137        90  104  122  
 5.  213  247  270       212  243  272

10ge2p1x520-eth-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr

RFC2544: Pkt throughput L2XC test cases with vhost

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 cross- connect. Qemu VNFs are connected to VPP via vhost-user interfaces. Guest is running testpmd interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is tested with Intel-X520-DA2.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 64b-1t1c-eth-l2xcbase- 
 eth-2vhostvr1024-1vm-ndrpdr 

 1.  0.66       0.44 
 2.  0.66       0.44 
  
 3.   35   41  423        36   57  422  
 4.   76  536  940        92  519  818  
 5.  558  915 1235       547  856 1141  

 64b-2t2c-eth-l2xcbase- 
 eth-2vhostvr1024-1vm-ndrpdr 

 1.  1.09       0.73 
 2.  1.10       0.74 
  
 3.   36   57  426        37   54  413  
 4.  101  509  806        82  505  797  
 5.  453  735 1074       459  731 1033  

 64b-4t4c-eth-l2xcbase- 
 eth-2vhostvr1024-1vm-ndrpdr 

 1.  1.90       1.28 
 2.  1.93       1.29 
  
 3.   35   49  351        37   53  345  
 4.   54  298  656        52  348  712  
 5.  241  642  844       231  663  856

10ge2p1x520-eth-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr

RFC2544: Pkt throughput L2XC test cases with vhost

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 cross- connect. Qemu VNFs are connected to VPP via vhost-user interfaces. Guest is running VPP l2xc interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is tested with Intel-X520-DA2.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 64b-1t1c-eth-l2xcbase- 
 eth-2vhostvr1024-1vm-vppl2xc-ndrpdr 

 1.  1.58       1.06 
 2.  2.72       1.83 
  
 3.   35   75  152        36   88  106  
 4.  126  192  225       119  179  210  
 5.  276  314  391       251  287  319  

 64b-2t2c-eth-l2xcbase- 
 eth-2vhostvr1024-1vm-vppl2xc-ndrpdr 

 1.  3.28       2.21 
 2.  3.80       2.55 
  
 3.   35   55   71        36   59   68  
 4.   85  134  154        85  125  142  
 5.  211  246  280       190  223  249  

 64b-4t4c-eth-l2xcbase- 
 eth-2vhostvr1024-1vm-vppl2xc-ndrpdr 

 1.  1.98       1.33 
 2.  5.28       3.55 
  
 3.   38   77   93        39   60   86  
 4.   77   98  116        74   89  101  
 5.  171  195  220       158  183  208

10ge2p1x520-ethip4-ip4base-eth-2vhostvr1024-1vm-ndrpdr

RFC2544: Pkt throughput IPv4 test cases with vhost

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing and two static IPv4 /24 route entries. Qemu VNFs are connected to VPP via vhost-user interfaces. Guest is running testpmd interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is tested with Intel-X520-DA2.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 64b-1t1c-ethip4-ip4base- 
 eth-2vhostvr1024-1vm-ndrpdr 

 1.  0.63       0.42 
 2.  0.63       0.43 
  
 3.   37   76  362        38   46  320  
 4.   77  367  667        69  323  589  
 5.  344  671  860       298  608  763  

 64b-2t2c-ethip4-ip4base- 
 eth-2vhostvr1024-1vm-ndrpdr 

 1.  0.96       0.64 
 2.  0.97       0.65 
  
 3.   38   84  422        39   76  400  
 4.  103  474  912        89  445  756  
 5.  405  699  970       402  710  971  

 64b-4t4c-ethip4-ip4base- 
 eth-2vhostvr1024-1vm-ndrpdr 

 1.  4.90       3.29 
 2.  4.97       3.34 
  
 3.   41   68  231        41   58  227  
 4.  127  314  484       101  294  437  
 5.  483  661  828       465  636  802

10ge2p1x520-ethip4-ip4base-eth-2vhostvr1024-1vm-vppip4-ndrpdr

RFC2544: Pkt throughput IPv4 test cases with vhost

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing and two static IPv4 /24 route entries. Qemu VNFs are connected to VPP via vhost-user interfaces. Guest is running VPP ip4 interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is tested with Intel-X520-DA2.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 64b-1t1c-ethip4-ip4base- 
 eth-2vhostvr1024-1vm-vppip4-ndrpdr 

 1.  0.85       0.57 
 2.  2.35       1.58 
  
 3.   44   82  127        41   68   85  
 4.  123  196  223       120  188  220  
 5.  316  383  436       290  354  417  

 64b-2t2c-ethip4-ip4base- 
 eth-2vhostvr1024-1vm-vppip4-ndrpdr 

 1.  0.95       0.64 
 2.  3.30       2.22 
  
 3.   38   90  106        38  106  136  
 4.   85  133  164        83  126  142  
 5.  212  257  292       202  242  279  

 64b-4t4c-ethip4-ip4base- 
 eth-2vhostvr1024-1vm-vppip4-ndrpdr 

 1.  3.05       2.05 
 2.  4.95       3.33 
  
 3.   42   53   64        41   69   87  
 4.   79   93  115       107  124  140  
 5.  219  253  283       216  249  276

10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr

RFC2544: Pkt throughput L2BD test cases with VXLANoIPv4 and vhost

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4. Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUT1 and DUT2.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge- domain and MAC learning enabled. Qemu VNFs are connected to VPP via vhost-user interfaces. Guest is running testpmd interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is tested with Intel-X520-DA2.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC7348.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 64b-1t1c-ethip4vxlan-l2bdbasemaclrn- 
 eth-2vhostvr1024-1vm-ndrpdr 

 1.  0.70       0.76 
 2.  0.70       0.76 
  
 3.   45   64  384        45   68  402  
 4.  122  507  816       132  446  724  
 5.  398  718  886       370  668  841  

 64b-2t2c-ethip4vxlan-l2bdbasemaclrn- 
 eth-2vhostvr1024-1vm-ndrpdr 

 1.  1.14       1.23 
 2.  1.16       1.24 
  
 3.   46   66  463        47   88  469  
 4.  107  520  819       130  538  840  
 5.  579 1035 1438       595 1030 1391  

 64b-4t4c-ethip4vxlan-l2bdbasemaclrn- 
 eth-2vhostvr1024-1vm-ndrpdr 

 1.  1.85       1.98 
 2.  1.87       2.01 
  
 3.   46   68  337        47   99  392  
 4.   85  297  636        92  300  672  
 5.  178  649  956       186  657 1180

10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr

RFC2544: Pkt throughput L2BD test cases with VXLANoIPv4 and vhost

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4. Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUT1 and DUT2.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge- domain and MAC learning enabled. Qemu VNFs are connected to VPP via vhost-user interfaces. Guest is running VPP l2xc interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is tested with Intel-X520-DA2.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC7348.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 64b-2t2c-ethip4vxlan-l2bdbasemaclrn- 
 eth-2vhostvr1024-1vm-vppl2xc-ndrpdr 

 1.  2.26       2.42 
 2.  2.27       2.43 
  
 3.   47  106  125        47   85  108  
 4.  107  168  206       133  172  222  
 5.  197  244  283       206  250  282  

 64b-4t4c-ethip4vxlan-l2bdbasemaclrn- 
 eth-2vhostvr1024-1vm-vppl2xc-ndrpdr 

 1.  3.84       4.12 
 2.  4.18       4.48 
  
 3.   55   89  101        52   90  107  
 4.  152  183  208       149  176  200  
 5.  319  364  405       326  373  416