3n-tsh-x520

10ge2p1x520-dot1q-l2bdbasemaclrn-ndrpdr

RFC2544: Pkt throughput L2BD with IEEE 802.1Q test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4. IEEE 802.1Q tagging is applied on link between DUT1 and DUT2.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge domain and MAC learning enabled. DUT1 and DUT2 are tested with Intel-X520-DA2.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 64b-1t1c- 
 dot1q-l2bdbasemaclrn-ndrpdr 

 1.  4.71       3.32 
 2.  4.74       3.33 
  
 3.   23   43   58        23   47   60  
 4.   99  113  120        49   58   66  
 5.  133  151  180       145  167  194  

 64b-2t2c- 
 dot1q-l2bdbasemaclrn-ndrpdr 

 1.  6.04       4.26 
 2.  6.07       4.28 
  
 3.   23   29   45        24   29   47  
 4.   43   62   76        46   67   76  
 5.   87  104  120        94  111  125  

 64b-4t4c- 
 dot1q-l2bdbasemaclrn-ndrpdr 

 1.  6.81       4.79 
 2.  6.88       4.84 
  
 3.   24   32   38        24   35   42  
 4.   42   64   74        52   72   83  
 5.   78   94  104        74   88  102

10ge2p1x520-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr

RFC2544: Packet throughput L2BD test cases with ACL

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.

  • [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with Intel-X520-DA2.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 10k flows per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 64b-1t1c-eth- 
 l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr 

 1.  3.33       2.24 
 2.  3.33       2.24 
  
 3.   23   30   39        23   48   68  
 4.   44   77   94        43   69   83  
 5.   81  100  123        80   97  116  

 64b-2t2c-eth- 
 l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr 

 1.  4.21       2.83 
 2.  4.23       2.85 
  
 3.   23   38   51        24   34   47  
 4.   39   63   74        40   61   72  
 5.   62   81   94        65   85  101  

 64b-4t4c-eth- 
 l2bdbasemaclrn-iacl50sf-10kflows-ndrpdr 

 1.  5.18       3.48 
 2.  5.58       3.75 
  
 3.   23   27   45        23   38   44  
 4.   39   56   66        38   57   74  
 5.   73   92  109        78  101  116

10ge2p1x520-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdr

RFC2544: Packet throughput L2BD test cases with ACL

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.

  • [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with Intel-X520-DA2.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 10k flows per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 64b-1t1c-eth- 
 l2bdbasemaclrn-iacl50sl-10kflows-ndrpdr 

 1.  3.19       2.15 
 2.  3.21       2.16 
  
 3.   23   36   48        23   32   37  
 4.   40   75   88        37   55   64  
 5.   84  115  140        83  102  122  

 64b-2t2c-eth- 
 l2bdbasemaclrn-iacl50sl-10kflows-ndrpdr 

 1.  4.41       2.96 
 2.  4.43       2.98 
  
 3.   23   36   43        24   31   53  
 4.   27   40   48        27   52   75  
 5.   71   94  109        75   97  112  

 64b-4t4c-eth- 
 l2bdbasemaclrn-iacl50sl-10kflows-ndrpdr 

 1.  2.55       1.71 
 2.  6.22       4.18 
  
 3.   23   28   38        23   38   51  
 4.   36   56   63        38   48   57  
 5.   76   92  106        70   84   97

10ge2p1x520-eth-l2bdbasemaclrn-macip-iacl50sl-10kflows-ndrpdr

RFC2544: Packet throughput L2BD test cases with ACL

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4.

  • [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required MACIP ACL rules are applied to input paths of both DUT1 interfaces. DUT1 and DUT2 are tested with Intel-X520-DA2.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 10k flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 64b-1t1c-eth-l2bdbasemaclrn- 
 macip-iacl50sl-10kflows-ndrpdr 

 1.  2.11       1.42 
 2.  2.11       1.42 
  
 3.   22   28   38        23   56   77  
 4.   41   97  118        41  104  127  
 5.   91  119  141        94  131  157  

 64b-2t2c-eth-l2bdbasemaclrn- 
 macip-iacl50sl-10kflows-ndrpdr 

 1.  3.46       2.33 
 2.  3.51       2.36 
  
 3.   23   40   55        23   29   35  
 4.   41   72   89        41   61   77  
 5.   79  108  120        86  111  128  

 64b-4t4c-eth-l2bdbasemaclrn- 
 macip-iacl50sl-10kflows-ndrpdr 

 1.  0.02       0.01 
 2.  6.51       4.38 
  
 3.   23   41   56        23   37   50  
 4.   46   60   71        46   58   68  
 5.   95  116  132        96  116  130

10ge2p1x520-eth-l2bdbasemaclrn-ndrpdr

RFC2544: Pkt throughput L2BD test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge- domain and MAC learning enabled. DUT1 and DUT2 tested with Intel-X520-DA2.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 64b-1t1c- 
 eth-l2bdbasemaclrn-ndrpdr 

 1.  5.41       3.64 
 2.  5.44       3.66 
  
 3.   22   52   70        22   45   56  
 4.   62   84  102        54   86  101  
 5.  107  127  145       111  130  151  

 64b-2t2c- 
 eth-l2bdbasemaclrn-ndrpdr 

 1.  6.68       4.49 
 2.  6.71       4.51 
  
 3.   23   30   40        23   31   47  
 4.   44   66   78        43   59   71  
 5.   78   95  107        83  101  113  

 64b-4t4c- 
 eth-l2bdbasemaclrn-ndrpdr 

 1.  6.67       4.48 
 2.  7.12       4.79 
  
 3.   23   31   40        23   31   37  
 4.   38   53   61        37   49   60  
 5.   60   73   85        59   72   86

10ge2p1x520-eth-l2bdbasemaclrn-oacl50sf-10kflows-ndrpdr

RFC2544: Packet throughput L2BD test cases with ACL

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.

  • [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with Intel-X520-DA2.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 10k flows per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 64b-1t1c-eth- 
 l2bdbasemaclrn-oacl50sf-10kflows-ndrpdr 

 1.  3.20       2.15 
 2.  3.21       2.16 
  
 3.   23   32   39        24   28   32  
 4.   41   68   86        43   67   81  
 5.   86  108  125        85  101  116  

 64b-2t2c-eth- 
 l2bdbasemaclrn-oacl50sf-10kflows-ndrpdr 

 1.  4.11       2.76 
 2.  4.11       2.76 
  
 3.   24   48   62        24   34   42  
 4.   39   72   84        42   73   86  
 5.   66   87  102        68   85  101  

 64b-4t4c-eth- 
 l2bdbasemaclrn-oacl50sf-10kflows-ndrpdr 

 1.  5.42       3.64 
 2.  5.76       3.87 
  
 3.   24   35   43        25   35   41  
 4.   41   56   70        41   54   67  
 5.   77   96  110        84  103  113

10ge2p1x520-eth-l2bdbasemaclrn-oacl50sl-10kflows-ndrpdr

RFC2544: Packet throughput L2BD test cases with ACL

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.

  • [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with Intel-X520-DA2.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 10k flows per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 64b-1t1c-eth- 
 l2bdbasemaclrn-oacl50sl-10kflows-ndrpdr 

 1.  3.07       2.06 
 2.  3.08       2.07 
  
 3.   24   31   39        24   30   37  
 4.   37   90  100        60   99  118  
 5.   79   97  121        82  100  120  

 64b-2t2c-eth- 
 l2bdbasemaclrn-oacl50sl-10kflows-ndrpdr 

 1.  4.23       2.85 
 2.  4.28       2.87 
  
 3.   24   41   51        25   33   41  
 4.   45   79   94        50   76   94  
 5.   73   91  104        73   94  110  

 64b-4t4c-eth- 
 l2bdbasemaclrn-oacl50sl-10kflows-ndrpdr 

 1.  5.54       3.72 
 2.  5.97       4.01 
  
 3.   24   31   41        25   31   37  
 4.   38   59   66        44   61   72  
 5.   72   89  100        68   81   94

10ge2p1x520-eth-l2bdscale100kmaclrn-ndrpdr

RFC2544: Pkt throughput for L2BD test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge- domain and MAC learning enabled. DUT1 and DUT2 tested with Intel-X520-DA2.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 50k flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses ranges are incremented as follows: port01_src ca:fe:00:00:00:00 - port01_src ca:fe:00:07:a1:1f, port01_dst fa:ce:00:00:00:00 - port01_dst fa:ce:00:07:a1:1f, port02_src fa:ce:00:00:00:00 - port02_src fa:ce:00:07:a1:1f, port02_dst ca:fe:00:00:00:00 - port02_dst ca:fe:00:07:a1:1f

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 64b-2t2c- 
 eth-l2bdscale100kmaclrn-ndrpdr 

 1.  5.47       3.68 
 2.  5.56       3.73 
  
 3.   22   46   67        23   45   58  
 4.   57   86   99        48   76   94  
 5.   99  123  139       100  123  142  

 64b-4t4c- 
 eth-l2bdscale100kmaclrn-ndrpdr 

 1.  5.44       3.65 
 2.  5.55       3.73 
  
 3.   23   33   60        23   32   49  
 4.   42   66   85        39   62   81  
 5.   70   96  122        66   95  123

10ge2p1x520-eth-l2bdscale10kmaclrn-ndrpdr

RFC2544: Pkt throughput for L2BD test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge- domain and MAC learning enabled. DUT1 and DUT2 tested with Intel-X520-DA2.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 5k flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses ranges are incremented as follows: port01_src ca:fe:00:00:00:00 - port01_src ca:fe:00:07:a1:1f, port01_dst fa:ce:00:00:00:00 - port01_dst fa:ce:00:07:a1:1f, port02_src fa:ce:00:00:00:00 - port02_src fa:ce:00:07:a1:1f, port02_dst ca:fe:00:00:00:00 - port02_dst ca:fe:00:07:a1:1f

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 64b-1t1c- 
 eth-l2bdscale10kmaclrn-ndrpdr 

 1.  4.41       2.96 
 2.  4.47       3.01 
  
 3.   23   51   65        23   51   58  
 4.   57   74   93        48   65   78  
 5.  115  135  162       121  142  172  

 64b-2t2c- 
 eth-l2bdscale10kmaclrn-ndrpdr 

 1.  5.86       3.94 
 2.  5.89       3.96 
  
 3.   23   34   48        24   38   47  
 4.   46   68   78        44   59   76  
 5.   81   98  115        82  102  115  

 64b-4t4c- 
 eth-l2bdscale10kmaclrn-ndrpdr 

 1.  6.25       4.20 
 2.  6.44       4.33 
  
 3.   23   31   38        23   36   47  
 4.   42   67   83        41   66   81  
 5.   64   88  107        63   86  102

10ge2p1x520-eth-l2bdscale1mmaclrn-ndrpdr

RFC2544: Pkt throughput for L2BD test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge- domain and MAC learning enabled. DUT1 and DUT2 tested with Intel-X520-DA2.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 500k flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses ranges are incremented as follows: port01_src ca:fe:00:00:00:00 - port01_src ca:fe:00:07:a1:1f, port01_dst fa:ce:00:00:00:00 - port01_dst fa:ce:00:07:a1:1f, port02_src fa:ce:00:00:00:00 - port02_src fa:ce:00:07:a1:1f, port02_dst ca:fe:00:00:00:00 - port02_dst ca:fe:00:07:a1:1f

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 64b-1t1c- 
 eth-l2bdscale1mmaclrn-ndrpdr 

 1.  3.49       2.34 
 2.  3.49       2.34 
  
 3.   23   35   82        23   54   73  
 4.   42   88  101        47   83   96  
 5.  154  343  444       162  354  478  

 64b-2t2c- 
 eth-l2bdscale1mmaclrn-ndrpdr 

 1.  4.99       3.35 
 2.  5.14       3.45 
  
 3.   23   55   76        23   35   46  
 4.   52   85  104        51   76   99  
 5.  114  163  208       123  180  207  

 64b-4t4c- 
 eth-l2bdscale1mmaclrn-ndrpdr 

 1.  5.44       3.65 
 2.  5.55       3.73 
  
 3.   23   36   71        23   33   50  
 4.   42   70   91        40   62   89  
 5.   79  121  146        74  110  141

10ge2p1x520-eth-l2patch-ndrpdr

RFC2544: Pkt throughput L2patch test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 patch.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 patch DUT1 and DUT2 tested with Intel-X520-DA2.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header,IPv4 header with static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 64b-1t1c-eth-l2patch-ndrpdr 

 1.  7.62       5.12 
 2.  7.82       5.25 
  
 3.   20   42   48        19   33   39  
 4.   39   62   71        45   64   73  
 5.   66   82   91        68   81   94  

 64b-2t2c-eth-l2patch-ndrpdr 

 1.  5.25       3.53 
 2.  7.92       5.32 
  
 3.   18   20   28        18   25   34  
 4.   27   40   49        27   40   45  
 5.   48   59   70        47   59   70  

 64b-4t4c-eth-l2patch-ndrpdr 

 1.  6.91       4.64 
 2.  7.19       4.83 
  
 3.   17   21   31        18   24   32  
 4.   26   43   50        25   42   49  
 5.   46   64   78        46   64   77

10ge2p1x520-eth-l2xcbase-ndrpdr

RFC2544: Pkt throughput L2XC test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 cross connect.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 cross- connect. DUT1 and DUT2 tested with Intel-X520-DA2.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 64b-1t1c-eth-l2xcbase-ndrpdr 

 1.  6.56       4.41 
 2.  6.59       4.43 
  
 3.   20   28   50        20   33   41  
 4.   49   72   84        46   68   86  
 5.   98  114  129       104  121  139  

 64b-2t2c-eth-l2xcbase-ndrpdr 

 1.  7.69       5.17 
 2.  7.77       5.22 
  
 3.   21   24   28        20   31   37  
 4.   35   54   72        37   52   65  
 5.   80   94  102        81   92  101  

 64b-4t4c-eth-l2xcbase-ndrpdr 

 1.  6.79       4.56 
 2.  7.10       4.77 
  
 3.   20   24   30        21   26   29  
 4.   28   47   55        29   37   44  
 5.   48   61   73        49   61   74