2n-tx2-xl710

2n1l-40ge2p1xl710-ethip4ipsec10000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr

RFC2544: Pkt throughput IPv4 IPsec tunnel mode.

  • [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 on TG-DUT1, Eth-IPv4-IPSec on DUT1-TG

  • [Cfg] DUT configuration: DUT1 is configured with multiple IPsec tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it and sends back to TG.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains one L3 flow-groups (number of flows per flow-group equals to number of IPSec tunnels) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces. Incrementing of IP.dst (IPv4 destination address) field is applied to the stream.

  • [Ref] Applicable standard specifications: RFC4303 and RFC2544.

 Test Name 

 Throughput: 
1. Mpps Gbps (NDR)
2. Mpps Gbps (PDR)

One-Way Latency Percentiles in uSec at %PDR load,
one set per each direction:
3. P50 P90 P99 P50 P90 P99 (10% PDR)
4. P50 P90 P99 P50 P90 P99 (50% PDR)
5. P50 P90 P99 P50 P90 P99 (90% PDR)

 1518b-1t1c-ethip4ipsec10000tnlsw-ip4base- 
int-aes128cbc-hmac512sha-udir-ndrpdr

 1.  0.11       1.38 
2. 0.11 1.38

 1518b-2t2c-ethip4ipsec10000tnlsw-ip4base- 
int-aes128cbc-hmac512sha-udir-ndrpdr

 1.  0.21       2.75 
2. 0.21 2.77

 1518b-4t4c-ethip4ipsec10000tnlsw-ip4base- 
int-aes128cbc-hmac512sha-udir-ndrpdr

 1.  0.42       5.44 
2. 0.42 5.44

 imix-1t1c-ethip4ipsec10000tnlsw-ip4base- 
int-aes128cbc-hmac512sha-udir-ndrpdr

 1.  0.24       0.87 
2. 0.24 0.87

 imix-2t2c-ethip4ipsec10000tnlsw-ip4base- 
int-aes128cbc-hmac512sha-udir-ndrpdr

 1.  0.48       1.74 
2. 0.48 1.74

 imix-4t4c-ethip4ipsec10000tnlsw-ip4base- 
int-aes128cbc-hmac512sha-udir-ndrpdr

 1.  0.94       3.40 
2. 0.94 3.40

2n1l-40ge2p1xl710-ethip4ipsec10000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr

RFC2544: Pkt throughput IPv4 IPsec tunnel mode.

  • [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 on TG-DUT1, Eth-IPv4-IPSec on DUT1-TG

  • [Cfg] DUT configuration: DUT1 is configured with multiple IPsec tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it and sends back to TG.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains one L3 flow-groups (number of flows per flow-group equals to number of IPSec tunnels) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces. Incrementing of IP.dst (IPv4 destination address) field is applied to the stream.

  • [Ref] Applicable standard specifications: RFC4303 and RFC2544.

 Test Name 

 Throughput: 
1. Mpps Gbps (NDR)
2. Mpps Gbps (PDR)

One-Way Latency Percentiles in uSec at %PDR load,
one set per each direction:
3. P50 P90 P99 P50 P90 P99 (10% PDR)
4. P50 P90 P99 P50 P90 P99 (50% PDR)
5. P50 P90 P99 P50 P90 P99 (90% PDR)

 1518b-1t1c-ethip4ipsec10000tnlsw-ip4base- 
int-aes128gcm-udir-ndrpdr

 1.  0.52       6.64 
2. 0.52 6.67

 1518b-2t2c-ethip4ipsec10000tnlsw-ip4base- 
int-aes128gcm-udir-ndrpdr

 1.  1.04      13.26 
2. 1.05 13.33

 1518b-4t4c-ethip4ipsec10000tnlsw-ip4base- 
int-aes128gcm-udir-ndrpdr

 1.  1.74      22.20 
2. 1.80 22.88

 imix-1t1c-ethip4ipsec10000tnlsw-ip4base- 
int-aes128gcm-udir-ndrpdr

 1.  1.28       4.40 
2. 1.30 4.44

 imix-2t2c-ethip4ipsec10000tnlsw-ip4base- 
int-aes128gcm-udir-ndrpdr

 1.  2.54       8.71 
2. 2.58 8.84

 imix-4t4c-ethip4ipsec10000tnlsw-ip4base- 
int-aes128gcm-udir-ndrpdr

 1.  4.61      15.78 
2. 4.63 15.86

2n1l-40ge2p1xl710-ethip4ipsec10000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr

RFC2544: Pkt throughput IPv4 IPsec tunnel mode.

  • [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 on TG-DUT1, Eth-IPv4-IPSec on DUT1-TG

  • [Cfg] DUT configuration: DUT1 is configured with multiple IPsec tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it and sends back to TG.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains one L3 flow-groups (number of flows per flow-group equals to number of IPSec tunnels) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces. Incrementing of IP.dst (IPv4 destination address) field is applied to the stream.

  • [Ref] Applicable standard specifications: RFC4303 and RFC2544.

 Test Name 

 Throughput: 
1. Mpps Gbps (NDR)
2. Mpps Gbps (PDR)

One-Way Latency Percentiles in uSec at %PDR load,
one set per each direction:
3. P50 P90 P99 P50 P90 P99 (10% PDR)
4. P50 P90 P99 P50 P90 P99 (50% PDR)
5. P50 P90 P99 P50 P90 P99 (90% PDR)

 1518b-1t1c-ethip4ipsec10000tnlsw-ip4base- 
int-aes256gcm-udir-ndrpdr

 1.  0.40       5.06 
2. 0.40 5.08

 1518b-2t2c-ethip4ipsec10000tnlsw-ip4base- 
int-aes256gcm-udir-ndrpdr

 1.  0.79      10.09 
2. 0.80 10.14

 1518b-4t4c-ethip4ipsec10000tnlsw-ip4base- 
int-aes256gcm-udir-ndrpdr

 1.  1.43      18.20 
2. 1.43 18.20

 imix-1t1c-ethip4ipsec10000tnlsw-ip4base- 
int-aes256gcm-udir-ndrpdr

 1.  1.06       3.64 
2. 1.07 3.67

 imix-2t2c-ethip4ipsec10000tnlsw-ip4base- 
int-aes256gcm-udir-ndrpdr

 1.  2.13       7.30 
2. 2.16 7.41

 imix-4t4c-ethip4ipsec10000tnlsw-ip4base- 
int-aes256gcm-udir-ndrpdr

 1.  3.92      13.43 
2. 3.96 13.57

2n1l-40ge2p1xl710-ethip4ipsec1000tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr

RFC2544: Pkt throughput IPv4 IPsec tunnel mode.

  • [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 on TG-DUT1, Eth-IPv4-IPSec on DUT1-TG

  • [Cfg] DUT configuration: DUT1 is configured with multiple IPsec tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it and sends back to TG.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains one L3 flow-groups (number of flows per flow-group equals to number of IPSec tunnels) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces. Incrementing of IP.dst (IPv4 destination address) field is applied to the stream.

  • [Ref] Applicable standard specifications: RFC4303 and RFC2544.

 Test Name 

 Throughput: 
1. Mpps Gbps (NDR)
2. Mpps Gbps (PDR)

One-Way Latency Percentiles in uSec at %PDR load,
one set per each direction:
3. P50 P90 P99 P50 P90 P99 (10% PDR)
4. P50 P90 P99 P50 P90 P99 (50% PDR)
5. P50 P90 P99 P50 P90 P99 (90% PDR)

 1518b-1t1c-ethip4ipsec1000tnlsw-ip4base- 
int-aes128cbc-hmac512sha-udir-ndrpdr

 1.  0.11       1.38 
2. 0.11 1.38

 1518b-2t2c-ethip4ipsec1000tnlsw-ip4base- 
int-aes128cbc-hmac512sha-udir-ndrpdr

 1.  0.22       2.79 
2. 0.22 2.79

 1518b-4t4c-ethip4ipsec1000tnlsw-ip4base- 
int-aes128cbc-hmac512sha-udir-ndrpdr

 1.  0.43       5.50 
2. 0.43 5.58

 imix-1t1c-ethip4ipsec1000tnlsw-ip4base- 
int-aes128cbc-hmac512sha-udir-ndrpdr

 1.  0.24       0.87 
2. 0.24 0.88

 imix-2t2c-ethip4ipsec1000tnlsw-ip4base- 
int-aes128cbc-hmac512sha-udir-ndrpdr

 1.  0.48       1.75 
2. 0.49 1.76

 imix-4t4c-ethip4ipsec1000tnlsw-ip4base- 
int-aes128cbc-hmac512sha-udir-ndrpdr

 1.  0.96       3.48 
2. 0.97 3.50

2n1l-40ge2p1xl710-ethip4ipsec1000tnlsw-ip4base-int-aes128gcm-udir-ndrpdr

RFC2544: Pkt throughput IPv4 IPsec tunnel mode.

  • [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 on TG-DUT1, Eth-IPv4-IPSec on DUT1-TG

  • [Cfg] DUT configuration: DUT1 is configured with multiple IPsec tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it and sends back to TG.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains one L3 flow-groups (number of flows per flow-group equals to number of IPSec tunnels) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces. Incrementing of IP.dst (IPv4 destination address) field is applied to the stream.

  • [Ref] Applicable standard specifications: RFC4303 and RFC2544.

 Test Name 

 Throughput: 
1. Mpps Gbps (NDR)
2. Mpps Gbps (PDR)

One-Way Latency Percentiles in uSec at %PDR load,
one set per each direction:
3. P50 P90 P99 P50 P90 P99 (10% PDR)
4. P50 P90 P99 P50 P90 P99 (50% PDR)
5. P50 P90 P99 P50 P90 P99 (90% PDR)

 1518b-1t1c-ethip4ipsec1000tnlsw-ip4base- 
int-aes128gcm-udir-ndrpdr

 1.  0.52       6.65 
2. 0.52 6.68

 1518b-2t2c-ethip4ipsec1000tnlsw-ip4base- 
int-aes128gcm-udir-ndrpdr

 1.  1.04      13.25 
2. 1.05 13.32

 1518b-4t4c-ethip4ipsec1000tnlsw-ip4base- 
int-aes128gcm-udir-ndrpdr

 1.  1.92      24.50 
2. 1.92 24.50

 imix-1t1c-ethip4ipsec1000tnlsw-ip4base- 
int-aes128gcm-udir-ndrpdr

 1.  1.28       4.38 
2. 1.31 4.47

 imix-2t2c-ethip4ipsec1000tnlsw-ip4base- 
int-aes128gcm-udir-ndrpdr

 1.  2.61       8.92 
2. 2.62 8.97

 imix-4t4c-ethip4ipsec1000tnlsw-ip4base- 
int-aes128gcm-udir-ndrpdr

 1.  5.15      17.64 
2. 5.23 17.91

2n1l-40ge2p1xl710-ethip4ipsec1000tnlsw-ip4base-int-aes256gcm-udir-ndrpdr

RFC2544: Pkt throughput IPv4 IPsec tunnel mode.

  • [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 on TG-DUT1, Eth-IPv4-IPSec on DUT1-TG

  • [Cfg] DUT configuration: DUT1 is configured with multiple IPsec tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it and sends back to TG.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains one L3 flow-groups (number of flows per flow-group equals to number of IPSec tunnels) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces. Incrementing of IP.dst (IPv4 destination address) field is applied to the stream.

  • [Ref] Applicable standard specifications: RFC4303 and RFC2544.

 Test Name 

 Throughput: 
1. Mpps Gbps (NDR)
2. Mpps Gbps (PDR)

One-Way Latency Percentiles in uSec at %PDR load,
one set per each direction:
3. P50 P90 P99 P50 P90 P99 (10% PDR)
4. P50 P90 P99 P50 P90 P99 (50% PDR)
5. P50 P90 P99 P50 P90 P99 (90% PDR)

 1518b-1t1c-ethip4ipsec1000tnlsw-ip4base- 
int-aes256gcm-udir-ndrpdr

 1.  0.40       5.05 
2. 0.40 5.07

 1518b-2t2c-ethip4ipsec1000tnlsw-ip4base- 
int-aes256gcm-udir-ndrpdr

 1.  0.79      10.09 
2. 0.80 10.14

 1518b-4t4c-ethip4ipsec1000tnlsw-ip4base- 
int-aes256gcm-udir-ndrpdr

 1.  1.58      20.12 
2. 1.59 20.22

 imix-1t1c-ethip4ipsec1000tnlsw-ip4base- 
int-aes256gcm-udir-ndrpdr

 1.  1.08       3.70 
2. 1.09 3.74

 imix-2t2c-ethip4ipsec1000tnlsw-ip4base- 
int-aes256gcm-udir-ndrpdr

 1.  2.16       7.40 
2. 2.18 7.47

 imix-4t4c-ethip4ipsec1000tnlsw-ip4base- 
int-aes256gcm-udir-ndrpdr

 1.  4.35      14.89 
2. 4.37 14.96

2n1l-40ge2p1xl710-ethip4ipsec1tnlsw-ip4base-policy-aes256gcm-udir-ndrpdr

RFC2544: Pkt throughput IPv4 IPsec tunnel mode.

  • [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 on TG-DUT1, Eth-IPv4-IPSec on DUT1-TG

  • [Cfg] DUT configuration: DUT1 is configured with multiple IPsec tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it and sends back to TG.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains one L3 flow-groups (number of flows per flow-group equals to number of IPSec tunnels) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces. Incrementing of IP.dst (IPv4 destination address) field is applied to the stream.

  • [Ref] Applicable standard specifications: RFC4303 and RFC2544.

 Test Name 

 Throughput: 
1. Mpps Gbps (NDR)
2. Mpps Gbps (PDR)

One-Way Latency Percentiles in uSec at %PDR load,
one set per each direction:
3. P50 P90 P99 P50 P90 P99 (10% PDR)
4. P50 P90 P99 P50 P90 P99 (50% PDR)
5. P50 P90 P99 P50 P90 P99 (90% PDR)

 64b-1t1c-ethip4ipsec1tnlsw-ip4base- 
policy-aes256gcm-udir-ndrpdr

 1.  2.14       2.36 
2. 2.16 2.39

 64b-2t2c-ethip4ipsec1tnlsw-ip4base- 
policy-aes256gcm-udir-ndrpdr

 1.  2.14       2.36 
2. 2.16 2.39

 64b-4t4c-ethip4ipsec1tnlsw-ip4base- 
policy-aes256gcm-udir-ndrpdr

 1.  2.14       2.37 
2. 2.16 2.38

2n1l-40ge2p1xl710-ethip4ipsec4tnlsw-ip4base-int-aes128cbc-hmac512sha-udir-ndrpdr

RFC2544: Pkt throughput IPv4 IPsec tunnel mode.

  • [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 on TG-DUT1, Eth-IPv4-IPSec on DUT1-TG

  • [Cfg] DUT configuration: DUT1 is configured with multiple IPsec tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it and sends back to TG.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains one L3 flow-groups (number of flows per flow-group equals to number of IPSec tunnels) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces. Incrementing of IP.dst (IPv4 destination address) field is applied to the stream.

  • [Ref] Applicable standard specifications: RFC4303 and RFC2544.

 Test Name 

 Throughput: 
1. Mpps Gbps (NDR)
2. Mpps Gbps (PDR)

One-Way Latency Percentiles in uSec at %PDR load,
one set per each direction:
3. P50 P90 P99 P50 P90 P99 (10% PDR)
4. P50 P90 P99 P50 P90 P99 (50% PDR)
5. P50 P90 P99 P50 P90 P99 (90% PDR)

 1518b-1t1c-ethip4ipsec4tnlsw-ip4base- 
int-aes128cbc-hmac512sha-udir-ndrpdr

 1.  0.11       1.40 
2. 0.11 1.40

 1518b-2t2c-ethip4ipsec4tnlsw-ip4base- 
int-aes128cbc-hmac512sha-udir-ndrpdr

 1.  0.22       2.81 
2. 0.22 2.82

 1518b-4t4c-ethip4ipsec4tnlsw-ip4base- 
int-aes128cbc-hmac512sha-udir-ndrpdr

 1.  0.43       5.62 
2. 0.44 5.71

 imix-1t1c-ethip4ipsec4tnlsw-ip4base- 
int-aes128cbc-hmac512sha-udir-ndrpdr

 1.  0.25       0.90 
2. 0.25 0.91

 imix-2t2c-ethip4ipsec4tnlsw-ip4base- 
int-aes128cbc-hmac512sha-udir-ndrpdr

 1.  0.50       1.80 
2. 0.50 1.81

 imix-4t4c-ethip4ipsec4tnlsw-ip4base- 
int-aes128cbc-hmac512sha-udir-ndrpdr

 1.  1.00       3.60 
2. 1.00 3.62

2n1l-40ge2p1xl710-ethip4ipsec4tnlsw-ip4base-int-aes128gcm-udir-ndrpdr

RFC2544: Pkt throughput IPv4 IPsec tunnel mode.

  • [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 on TG-DUT1, Eth-IPv4-IPSec on DUT1-TG

  • [Cfg] DUT configuration: DUT1 is configured with multiple IPsec tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it and sends back to TG.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains one L3 flow-groups (number of flows per flow-group equals to number of IPSec tunnels) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces. Incrementing of IP.dst (IPv4 destination address) field is applied to the stream.

  • [Ref] Applicable standard specifications: RFC4303 and RFC2544.

 Test Name 

 Throughput: 
1. Mpps Gbps (NDR)
2. Mpps Gbps (PDR)

One-Way Latency Percentiles in uSec at %PDR load,
one set per each direction:
3. P50 P90 P99 P50 P90 P99 (10% PDR)
4. P50 P90 P99 P50 P90 P99 (50% PDR)
5. P50 P90 P99 P50 P90 P99 (90% PDR)

 1518b-1t1c-ethip4ipsec4tnlsw-ip4base- 
int-aes128gcm-udir-ndrpdr

 1.  0.54       6.91 
2. 0.55 6.95

 1518b-2t2c-ethip4ipsec4tnlsw-ip4base- 
int-aes128gcm-udir-ndrpdr

 1.  1.09      13.85 
2. 1.09 13.92

 1518b-4t4c-ethip4ipsec4tnlsw-ip4base- 
int-aes128gcm-udir-ndrpdr

 1.  1.92      24.50 
2. 1.92 24.50

 imix-1t1c-ethip4ipsec4tnlsw-ip4base- 
int-aes128gcm-udir-ndrpdr

 1.  1.42       4.85 
2. 1.46 5.00

 imix-2t2c-ethip4ipsec4tnlsw-ip4base- 
int-aes128gcm-udir-ndrpdr

 1.  2.82       9.66 
2. 2.92 10.01

 imix-4t4c-ethip4ipsec4tnlsw-ip4base- 
int-aes128gcm-udir-ndrpdr

 1.  5.39      18.44 
2. 5.87 20.08

2n1l-40ge2p1xl710-ethip4ipsec4tnlsw-ip4base-int-aes256gcm-udir-ndrpdr

RFC2544: Pkt throughput IPv4 IPsec tunnel mode.

  • [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 on TG-DUT1, Eth-IPv4-IPSec on DUT1-TG

  • [Cfg] DUT configuration: DUT1 is configured with multiple IPsec tunnels between it and TG. DUT gets IPv4 traffic from TG, encrypts it and sends back to TG.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains one L3 flow-groups (number of flows per flow-group equals to number of IPSec tunnels) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces. Incrementing of IP.dst (IPv4 destination address) field is applied to the stream.

  • [Ref] Applicable standard specifications: RFC4303 and RFC2544.

 Test Name 

 Throughput: 
1. Mpps Gbps (NDR)
2. Mpps Gbps (PDR)

One-Way Latency Percentiles in uSec at %PDR load,
one set per each direction:
3. P50 P90 P99 P50 P90 P99 (10% PDR)
4. P50 P90 P99 P50 P90 P99 (50% PDR)
5. P50 P90 P99 P50 P90 P99 (90% PDR)

 1518b-1t1c-ethip4ipsec4tnlsw-ip4base- 
int-aes256gcm-udir-ndrpdr

 1.  0.41       5.25 
2. 0.41 5.27

 1518b-2t2c-ethip4ipsec4tnlsw-ip4base- 
int-aes256gcm-udir-ndrpdr

 1.  0.82      10.50 
2. 0.83 10.55

 1518b-4t4c-ethip4ipsec4tnlsw-ip4base- 
int-aes256gcm-udir-ndrpdr

 1.  1.65      21.03 
2. 1.66 21.13

 imix-1t1c-ethip4ipsec4tnlsw-ip4base- 
int-aes256gcm-udir-ndrpdr

 1.  1.17       4.00 
2. 1.20 4.12

 imix-2t2c-ethip4ipsec4tnlsw-ip4base- 
int-aes256gcm-udir-ndrpdr

 1.  2.40       8.20 
2. 2.41 8.24

 imix-4t4c-ethip4ipsec4tnlsw-ip4base- 
int-aes256gcm-udir-ndrpdr

 1.  4.64      15.87 
2. 4.83 16.52