3n-skx-xxv710¶
25ge2p1xxv710-avf-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr¶
RFC2544: Pkt throughput L2BD test cases with vhost and vpp link bonding
[Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4. 802.1q tagging is applied on link between DUT1 and DUT2.
[Cfg] DUT configuration: DUT1 and DUT2 are configured with VPP link bonding (mode LACP, transmit policy l34) on link between DUT1 and DUT2 and L2 bridge-domain with MAC learning enabled. Qemu VNFs are connected to VPP via vhost-user interfaces. Guest is running testpmd interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is tested with Intel-XXV710.
[Ver] TG veriffication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
[Ref] Applicable standard specifications: RFC2544.
|
|
---|---|
|
|
|
|
|
|
25ge2p1xxv710-avf-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-mrr¶
RFC2544: Pkt throughput L2BD test cases with vhost and vpp link bonding
[Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4. 802.1q tagging is applied on link between DUT1 and DUT2.
[Cfg] DUT configuration: DUT1 and DUT2 are configured with VPP link bonding (mode LACP, transmit policy l34) on link between DUT1 and DUT2 and L2 bridge-domain with MAC learning enabled. Qemu VNFs are connected to VPP via vhost-user interfaces. Guest is running VPP l2xc interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is tested with Intel-XXV710.
[Ver] TG veriffication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
[Ref] Applicable standard specifications: RFC2544.
|
|
---|---|
|
|
|
|
|
|
25ge2p1xxv710-avf-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr¶
RFC2544: Pkt throughput L2XC test cases with vhost and vpp link bonding
[Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv4 for L2 cross connect. 802.1q tagging is applied on link between DUT1 and DUT2.
[Cfg] DUT configuration: DUT1 and DUT2 are configured with VPP link bonding (mode LACP, transmit policy l34) on link between DUT1 and DUT2 and L2 cross- connect. Qemu VNFs are connected to VPP via vhost-user interfaces. Guest is running testpmd interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is tested with Intel-XXV710.
[Ver] TG veriffication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
[Ref] Applicable standard specifications: RFC2544.
|
|
---|---|
|
|
|
|
|
|
25ge2p1xxv710-avf-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-mrr¶
RFC2544: Pkt throughput L2XC test cases with vhost and vpp link bonding
[Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv4 for L2 cross connect. 802.1q tagging is applied on link between DUT1 and DUT2.
[Cfg] DUT configuration: DUT1 and DUT2 are configured with VPP link bonding (mode LACP, transmit policy l34) on link between DUT1 and DUT2 and L2 cross- connect. Qemu VNFs are connected to VPP via vhost-user interfaces. Guest is running VPP l2xc interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is tested with Intel-XXV710.
[Ver] TG veriffication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
[Ref] Applicable standard specifications: RFC2544.
|
|
---|---|
|
|
|
|
|
|
25ge2p1xxv710-avf-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr¶
RFC2544: Pkt throughput L2BD with vhost and IEEE 802.1Q test cases
[Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4. IEEE 802.1Q tagging is applied on link between DUT1 and DUT2.
[Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge- domain and MAC learning enabled. Qemu VNFs are connected to VPP via vhost-user interfaces. Guest is running testpmd interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is tested with Intel-XXV710.
[Ver] TG veriffication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
[Ref] Applicable standard specifications: RFC2544.
|
|
---|---|
|
|
|
|
|
|
25ge2p1xxv710-avf-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-mrr¶
RFC2544: Pkt throughput L2BD with vhost abd IEEE 802.1Q test cases
[Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4. IEEE 802.1Q tagging is applied on link between DUT1 and DUT2.
[Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge- domain and MAC learning enabled. Qemu VNFs are connected to VPP via vhost-user interfaces. Guest is running VPP l2xc interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is tested with Intel-XXV710.
[Ver] TG veriffication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
[Ref] Applicable standard specifications: RFC2544.
|
|
---|---|
|
|
|
|
|
|
25ge2p1xxv710-avf-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr¶
RFC2544: Pkt throughput L2XC test cases with vhost
[Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv4 for L2 cross connect. 802.1q tagging is applied on link between DUT1 and DUT2.
[Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 cross- connect. Qemu VNFs are connected to VPP via vhost-user interfaces. Guest is running testpmd interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is tested with Intel-XXV710.
[Ver] TG veriffication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
[Ref] Applicable standard specifications: RFC2544.
|
|
---|---|
|
|
|
|
|
|
25ge2p1xxv710-avf-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-mrr¶
RFC2544: Pkt throughput L2XC test cases with vhost
[Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv4 for L2 cross connect. 802.1q tagging is applied on link between DUT1 and DUT2.
[Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 cross- connect. Qemu VNFs are connected to VPP via vhost-user interfaces. Guest is running VPP l2xc interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is tested with Intel-XXV710.
[Ver] TG veriffication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
[Ref] Applicable standard specifications: RFC2544.
|
|
---|---|
|
|
|
|
|
|
25ge2p1xxv710-avf-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr¶
RFC2544: Pkt throughput L2BD test cases with vhost
[Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4.
[Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge- domain and MAC learning enabled. Qemu VNFs are connected to VPP via vhost-user interfaces. Guest is running testpmd interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is tested with Intel-XXV710.
[Ver] TG veriffication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
[Ref] Applicable standard specifications: RFC2544.
|
|
---|---|
|
|
|
|
|
|
25ge2p1xxv710-avf-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-mrr¶
RFC2544: Pkt throughput L2BD test cases with vhost
[Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4.
[Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge- domain and MAC learning enabled. Qemu VNFs are connected to VPP via vhost-user interfaces. Guest is running VPP l2xc interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is tested with Intel-XXV710.
[Ver] TG veriffication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
[Ref] Applicable standard specifications: RFC2544.
|
|
---|---|
|
|
|
|
|
|
25ge2p1xxv710-avf-eth-l2xcbase-eth-2vhostvr1024-1vm-mrr¶
RFC2544: Pkt throughput L2XC test cases with vhost
[Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4.
[Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 cross- connect. Qemu VNFs are connected to VPP via vhost-user interfaces. Guest is running testpmd interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is tested with Intel-XXV710.
[Ver] TG veriffication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
[Ref] Applicable standard specifications: RFC2544.
|
|
---|---|
|
|
|
|
|
|
25ge2p1xxv710-avf-eth-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-mrr¶
RFC2544: Pkt throughput L2XC test cases with vhost
[Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4.
[Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 cross- connect. Qemu VNFs are connected to VPP via vhost-user interfaces. Guest is running VPP l2xc interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is tested with Intel-XXV710.
[Ver] TG veriffication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
[Ref] Applicable standard specifications: RFC2544.
|
|
---|---|
|
|
|
|
|
|
25ge2p1xxv710-avf-ethip4-ip4base-eth-2vhostvr1024-1vm-mrr¶
RFC2544: Pkt throughput IPv4 test cases with vhost
[Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv4 for IPv4 routing.
[Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing and two static IPv4 /24 route entries. Qemu VNFs are connected to VPP via vhost-user interfaces. Guest is running testpmd interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is tested with Intel-XXV710.
[Ver] TG veriffication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
[Ref] Applicable standard specifications: RFC2544.
|
|
---|---|
|
|
|
|
|
|
25ge2p1xxv710-avf-ethip4-ip4base-eth-2vhostvr1024-1vm-vppip4-mrr¶
RFC2544: Pkt throughput IPv4 test cases with vhost
[Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv4 for IPv4 routing.
[Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing and two static IPv4 /24 route entries. Qemu VNFs are connected to VPP via vhost-user interfaces. Guest is running VPP ip4 interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is tested with Intel-XXV710.
[Ver] TG veriffication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
[Ref] Applicable standard specifications: RFC2544.
|
|
---|---|
|
|
|
|
|
|
25ge2p1xxv710-avf-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr¶
RFC2544: Pkt throughput L2BD test cases with VXLANoIPv4 and vhost
[Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4. Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUT1 and DUT2.
[Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge- domain and MAC learning enabled. Qemu VNFs are connected to VPP via vhost-user interfaces. Guest is running testpmd interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is tested with Intel-XXV710.
[Ver] TG veriffication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
[Ref] Applicable standard specifications: RFC7348.
|
|
---|---|
|
|
|
|
|
|
25ge2p1xxv710-avf-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-mrr¶
RFC2544: Pkt throughput L2BD test cases with VXLANoIPv4 and vhost
[Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4. Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUT1 and DUT2.
[Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge- domain and MAC learning enabled. Qemu VNFs are connected to VPP via vhost-user interfaces. Guest is running VPP l2xc interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is tested with Intel-XXV710.
[Ver] TG veriffication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
[Ref] Applicable standard specifications: RFC7348.
|
|
---|---|
|
|
|
|
|
|
25ge2p1xxv710-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr¶
RFC2544: Pkt throughput L2BD with vhost and IEEE 802.1Q test cases
[Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4. IEEE 802.1Q tagging is applied on link between DUT1 and DUT2.
[Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge- domain and MAC learning enabled. Qemu VNFs are connected to VPP via vhost-user interfaces. Guest is running testpmd interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is tested with Intel-XXV710.
[Ver] TG veriffication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
[Ref] Applicable standard specifications: RFC2544.
|
|
---|---|
|
|
|
|
|
|
25ge2p1xxv710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr¶
RFC2544: Pkt throughput L2BD test cases with vhost
[Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4.
[Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge- domain and MAC learning enabled. Qemu VNFs are connected to VPP via vhost-user interfaces. Guest is running testpmd interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is tested with Intel-XXV710.
[Ver] TG veriffication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
[Ref] Applicable standard specifications: RFC2544.
|
|
---|---|
|
|
|
|
|
|
25ge2p1xxv710-eth-l2xcbase-eth-2vhostvr1024-1vm-mrr¶
RFC2544: Pkt throughput L2XC test cases with vhost
[Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4.
[Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 cross- connect. Qemu VNFs are connected to VPP via vhost-user interfaces. Guest is running testpmd interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is tested with Intel-XXV710.
[Ver] TG veriffication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
[Ref] Applicable standard specifications: RFC2544.
|
|
---|---|
|
|
|
|
|
|
25ge2p1xxv710-ethip4-ip4base-eth-2vhostvr1024-1vm-mrr¶
RFC2544: Pkt throughput IPv4 test cases with vhost
[Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv4 for IPv4 routing.
[Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing and two static IPv4 /24 route entries. Qemu VNFs are connected to VPP via vhost-user interfaces. Guest is running testpmd interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is tested with Intel-XXV710.
[Ver] TG veriffication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
[Ref] Applicable standard specifications: RFC2544.
|
|
---|---|
|
|
|
|
|
|
25ge2p1xxv710-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr¶
RFC2544: Pkt throughput L2BD test cases with VXLANoIPv4 and vhost
[Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4. Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUT1 and DUT2.
[Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge- domain and MAC learning enabled. Qemu VNFs are connected to VPP via vhost-user interfaces. Guest is running testpmd interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is tested with Intel-XXV710.
[Ver] TG veriffication: In MaxReceivedRate tests TG sends traffic at line rate and reports total received packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
[Ref] Applicable standard specifications: RFC7348.
|
|
---|---|
|
|
|
|
|
|