3n-tsh-x520

10ge2p1x520-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr

RFC2544: Pkt throughput L2BD with vhost and IEEE 802.1Q test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4. IEEE 802.1Q tagging is applied on link between DUT1 and DUT2.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge- domain and MAC learning enabled. Qemu VNFs are connected to VPP via vhost-user interfaces. Guest is running testpmd interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is tested with Intel-X520-DA2.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 64b-1t1c-dot1q-l2bdbasemaclrn- 
 eth-2vhostvr1024-1vm-ndrpdr 

 1.  1.04       0.70 
 2.  1.04       0.70 
  
 3.   48   74  260        49   74  247  
 4.  102  326  530       106  315  514  
 5.  341  601  779       322  533  714  

 64b-2t2c-dot1q-l2bdbasemaclrn- 
 eth-2vhostvr1024-1vm-ndrpdr 

 1.  1.82       1.22 
 2.  1.84       1.24 
  
 3.   45   80  296        45  115  287  
 4.  126  336  527       104  342  543  
 5.  312  546  657       353  565  690  

 64b-4t4c-dot1q-l2bdbasemaclrn- 
 eth-2vhostvr1024-1vm-ndrpdr 

 1.  3.01       2.02 
 2.  3.10       2.08 
  
 3.   45  102  412        47   80  421  
 4.  165  498  619       142  469  587  
 5.  552  910 1069       520  856 1037

10ge2p1x520-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr

RFC2544: Pkt throughput L2BD with vhost abd IEEE 802.1Q test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4. IEEE 802.1Q tagging is applied on link between DUT1 and DUT2.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge- domain and MAC learning enabled. Qemu VNFs are connected to VPP via vhost-user interfaces. Guest is running VPP l2xc interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is tested with Intel-X520-DA2.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 64b-2t2c-dot1q-l2bdbasemaclrn- 
 eth-2vhostvr1024-1vm-vppl2xc-ndrpdr 

 1.  0.89       0.59 
 2.  3.04       2.04 
  
 3.   44  154  185        45  136  165  
 4.  108  184  206       106  157  184  
 5.  280  329  369       233  269  308  

 64b-4t4c-dot1q-l2bdbasemaclrn- 
 eth-2vhostvr1024-1vm-vppl2xc-ndrpdr 

 1.  3.09       2.07 
 2.  5.09       3.42 
  
 3.   46  114  130        47   95  109  
 4.  104  134  148        99  119  132  
 5.  210  245  272       182  202  228

10ge2p1x520-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr

RFC2544: Pkt throughput L2XC test cases with vhost

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 cross connect. 802.1q tagging is applied on link between DUT1 and DUT2.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 cross- connect. Qemu VNFs are connected to VPP via vhost-user interfaces. Guest is running testpmd interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is tested with Intel-X520-DA2.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 64b-1t1c-dot1q-l2xcbase- 
 eth-2vhostvr1024-1vm-ndrpdr 

 1.  2.47       1.66 
 2.  2.50       1.68 
  
 3.   41  133  170        41  113  163  
 4.  163  273  369       181  283  382  
 5. 1048 1183 1288      1053 1182 1288  

 64b-2t2c-dot1q-l2xcbase- 
 eth-2vhostvr1024-1vm-ndrpdr 

 1.  3.48       2.34 
 2.  3.53       2.37 
  
 3.   38  131  187        39   84  168  
 4.  123  183  272       116  189  287  
 5.  356  424  479       358  418  466  

 64b-4t4c-dot1q-l2xcbase- 
 eth-2vhostvr1024-1vm-ndrpdr 

 1.  2.93       1.97 
 2.  2.97       1.99 
  
 3.   38   67  373        39   50  360  
 4.   97  385  582        69  392  575  
 5.  258  550  643       263  564  664

10ge2p1x520-dot1q-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr

RFC2544: Pkt throughput L2XC test cases with vhost

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 cross connect. 802.1q tagging is applied on link between DUT1 and DUT2.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 cross- connect. Qemu VNFs are connected to VPP via vhost-user interfaces. Guest is running VPP l2xc interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is tested with Intel-X520-DA2.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 64b-1t1c-dot1q-l2xcbase- 
 eth-2vhostvr1024-1vm-vppl2xc-ndrpdr 

 1.  0.72       0.48 
 2.  2.20       1.48 
  
 3.   41  102  123        41  114  170  
 4.  102  187  222       100  179  215  
 5.  310  368  425       304  368  420  

 64b-2t2c-dot1q-l2xcbase- 
 eth-2vhostvr1024-1vm-vppl2xc-ndrpdr 

 1.  2.05       1.38 
 2.  3.38       2.27 
  
 3.   38   70   87        39   95  123  
 4.  116  183  220        90  152  188  
 5.  238  288  326       212  248  285  

 64b-4t4c-dot1q-l2xcbase- 
 eth-2vhostvr1024-1vm-vppl2xc-ndrpdr 

 1.  3.78       2.54 
 2.  5.73       3.85 
  
 3.   39   87  103        38   70   89  
 4.   83  114  124        77  101  114  
 5.  167  193  225       145  166  185

10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr

RFC2544: Pkt throughput L2BD test cases with vhost

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge- domain and MAC learning enabled. Qemu VNFs are connected to VPP via vhost-user interfaces. Guest is running testpmd interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is tested with Intel-X520-DA2.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 64b-1t1c-eth-l2bdbasemaclrn- 
 eth-2vhostvr1024-1vm-ndrpdr 

 1.  2.25       1.51 
 2.  2.30       1.55 
  
 3.   47  164  230        47   91  185  
 4.  213  288  396       189  261  368  
 5. 1310 1465 1591      1187 1334 1464  

 64b-2t2c-eth-l2bdbasemaclrn- 
 eth-2vhostvr1024-1vm-ndrpdr 

 1.  1.88       1.26 
 2.  1.93       1.30 
  
 3.   43  125  289        44   94  285  
 4.  106  321  512       108  326  490  
 5.  248  465  561       281  485  586  

 64b-4t4c-eth-l2bdbasemaclrn- 
 eth-2vhostvr1024-1vm-ndrpdr 

 1.  2.95       1.98 
 2.  2.97       1.99 
  
 3.   43  127  406        44   60  350  
 4.  111  435  614        93  381  574  
 5.  316  604  694       338  645  727

10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr

RFC2544: Pkt throughput L2BD test cases with vhost

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge- domain and MAC learning enabled. Qemu VNFs are connected to VPP via vhost-user interfaces. Guest is running VPP l2xc interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is tested with Intel-X520-DA2.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 64b-1t1c-eth-l2bdbasemaclrn- 
 eth-2vhostvr1024-1vm-vppl2xc-ndrpdr 

 1.  1.30       0.88 
 2.  2.10       1.41 
  
 3.   46   78   95        46  107  130  
 4.  124  202  230       122  167  200  
 5.  303  360  413       275  328  372  

 64b-2t2c-eth-l2bdbasemaclrn- 
 eth-2vhostvr1024-1vm-vppl2xc-ndrpdr 

 1.  1.73       1.16 
 2.  3.09       2.08 
  
 3.   43   86  156        44   84  105  
 4.  114  154  169       115  182  209  
 5.  228  280  320       228  273  315  

 64b-4t4c-eth-l2bdbasemaclrn- 
 eth-2vhostvr1024-1vm-vppl2xc-ndrpdr 

 1.  2.81       1.89 
 2.  5.44       3.65 
  
 3.   44   85  101        45   90  115  
 4.   89  113  133        86  121  138  
 5.  193  224  249       173  195  223

10ge2p1x520-eth-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr

RFC2544: Pkt throughput L2XC test cases with vhost

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 cross- connect. Qemu VNFs are connected to VPP via vhost-user interfaces. Guest is running testpmd interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is tested with Intel-X520-DA2.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 64b-1t1c-eth-l2xcbase- 
 eth-2vhostvr1024-1vm-ndrpdr 

 1.  2.36       1.59 
 2.  2.75       1.85 
  
 3.   39  121  221        40  115  214  
 4.  170  283  382       168  269  368  
 5. 1010 1145 1278       988 1126 1260  

 64b-2t2c-eth-l2xcbase- 
 eth-2vhostvr1024-1vm-ndrpdr 

 1.  1.66       1.11 
 2.  1.83       1.23 
  
 3.   37   87  282        37  111  307  
 4.  184  443  617       145  421  563  
 5.  433  587  743       434  586  749  

 64b-4t4c-eth-l2xcbase- 
 eth-2vhostvr1024-1vm-ndrpdr 

 1.  2.94       1.98 
 2.  3.19       2.14 
  
 3.   37   91  364        38   56  390  
 4.   86  396  557        78  350  523  
 5.  275  549  650       241  502  582

10ge2p1x520-eth-l2xcbase-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr

RFC2544: Pkt throughput L2XC test cases with vhost

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 cross- connect. Qemu VNFs are connected to VPP via vhost-user interfaces. Guest is running VPP l2xc interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is tested with Intel-X520-DA2.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 64b-1t1c-eth-l2xcbase- 
 eth-2vhostvr1024-1vm-vppl2xc-ndrpdr 

 1.  0.78       0.52 
 2.  2.36       1.58 
  
 3.   40  151  173        40   86  100  
 4.  115  155  212       120  194  228  
 5.  299  358  414       259  321  363  

 64b-2t2c-eth-l2xcbase- 
 eth-2vhostvr1024-1vm-vppl2xc-ndrpdr 

 1.  2.14       1.44 
 2.  3.71       2.49 
  
 3.   36  118  135        37   98  122  
 4.   88  133  160        84  125  146  
 5.  186  222  256       179  212  240  

 64b-4t4c-eth-l2xcbase- 
 eth-2vhostvr1024-1vm-vppl2xc-ndrpdr 

 1.  2.59       1.74 
 2.  6.02       4.05 
  
 3.   38   93  115        43   56   65  
 4.   73  112  129        82  101  119  
 5.  174  209  254       150  172  200

10ge2p1x520-ethip4-ip4base-eth-2vhostvr1024-1vm-ndrpdr

RFC2544: Pkt throughput IPv4 test cases with vhost

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing and two static IPv4 /24 route entries. Qemu VNFs are connected to VPP via vhost-user interfaces. Guest is running testpmd interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is tested with Intel-X520-DA2.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 64b-1t1c-ethip4-ip4base- 
 eth-2vhostvr1024-1vm-ndrpdr 

 1.  1.16       0.78 
 2.  1.16       0.78 
  
 3.   43  125  312        43   63  267  
 4.  111  264  467       153  288  474  
 5.  290  492  650       284  469  607  

 64b-2t2c-ethip4-ip4base- 
 eth-2vhostvr1024-1vm-ndrpdr 

 1.  1.84       1.23 
 2.  1.84       1.23 
  
 3.   40  137  361        40   71  383  
 4.  141  375  570       103  327  497  
 5.  315  521  639       274  483  593  

 64b-4t4c-ethip4-ip4base- 
 eth-2vhostvr1024-1vm-ndrpdr 

 1.  2.78       1.87 
 2.  2.78       1.87 
  
 3.   40   67  461        41  104  438  
 4.   98  395  579        79  367  576  
 5.  236  559  719       247  532  629

10ge2p1x520-ethip4-ip4base-eth-2vhostvr1024-1vm-vppip4-ndrpdr

RFC2544: Pkt throughput IPv4 test cases with vhost

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for IPv4 routing.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing and two static IPv4 /24 route entries. Qemu VNFs are connected to VPP via vhost-user interfaces. Guest is running VPP ip4 interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is tested with Intel-X520-DA2.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC2544.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 64b-1t1c-ethip4-ip4base- 
 eth-2vhostvr1024-1vm-vppip4-ndrpdr 

 1.  1.32       0.89 
 2.  2.14       1.44 
  
 3.   42  148  181        43  128  155  
 4.  158  237  272       144  218  249  
 5.  355  421  478       322  383  432  

 64b-2t2c-ethip4-ip4base- 
 eth-2vhostvr1024-1vm-vppip4-ndrpdr 

 1.  1.48       0.99 
 2.  3.11       2.09 
  
 3.   40  109  170        41  109  157  
 4.  145  220  246       139  206  240  
 5.  267  318  362       246  281  313  

 64b-4t4c-ethip4-ip4base- 
 eth-2vhostvr1024-1vm-vppip4-ndrpdr 

 1.  3.18       2.14 
 2.  5.40       3.63 
  
 3.   41   79   96        41   76   95  
 4.   97  126  147        88  115  132  
 5.  196  228  261       169  191  216

10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr

RFC2544: Pkt throughput L2BD test cases with VXLANoIPv4 and vhost

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4. Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUT1 and DUT2.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge- domain and MAC learning enabled. Qemu VNFs are connected to VPP via vhost-user interfaces. Guest is running testpmd interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is tested with Intel-X520-DA2.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC7348.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 64b-1t1c-ethip4vxlan-l2bdbasemaclrn- 
 eth-2vhostvr1024-1vm-ndrpdr 

 1.  1.12       0.75 
 2.  1.12       0.75 
  
 3.   52  105  252        54  108  275  
 4.  132  328  530       148  335  551  
 5.  418  616  782       379  560  720  

 64b-2t2c-ethip4vxlan-l2bdbasemaclrn- 
 eth-2vhostvr1024-1vm-ndrpdr 

 1.  1.82       1.23 
 2.  1.92       1.29 
  
 3.   48  149  317        49   90  319  
 4.  163  349  555       137  369  551  
 5.  346  557  665       423  590  683  

 64b-4t4c-ethip4vxlan-l2bdbasemaclrn- 
 eth-2vhostvr1024-1vm-ndrpdr 

 1.  2.00       1.34 
 2.  2.82       1.89 
  
 3.   48  110  411        49   89  401  
 4.  118  450  624       130  418  617  
 5.  377  646  747       248  577  673

10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr

RFC2544: Pkt throughput L2BD test cases with VXLANoIPv4 and vhost

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.

  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4. Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUT1 and DUT2.

  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge- domain and MAC learning enabled. Qemu VNFs are connected to VPP via vhost-user interfaces. Guest is running VPP l2xc interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is tested with Intel-X520-DA2.

  • [Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.

  • [Ref] Applicable standard specifications: RFC7348.

 Test Name 

 Throughput: 
 1.  Mpps       Gbps (NDR) 
 2.  Mpps       Gbps (PDR) 
 
 One-Way Latency Percentiles in uSec at %PDR load, 
 one set per each direction: 
 3.  P50  P90  P99       P50  P90  P99 (10% PDR) 
 4.  P50  P90  P99       P50  P90  P99 (50% PDR) 
 5.  P50  P90  P99       P50  P90  P99 (90% PDR) 

 64b-1t1c-ethip4vxlan-l2bdbasemaclrn- 
 eth-2vhostvr1024-1vm-vppl2xc-ndrpdr 

 1.  1.38       0.93 
 2.  1.65       1.11 
  
 3.   52  126  166        52  119  149  
 4.  169  285  303       160  263  294  
 5.  407  482  545       420  483  537  

 64b-2t2c-ethip4vxlan-l2bdbasemaclrn- 
 eth-2vhostvr1024-1vm-vppl2xc-ndrpdr 

 1.  2.12       1.42 
 2.  2.64       1.78 
  
 3.   48  177  210        49   87  116  
 4.  136  210  251       118  183  219  
 5.  298  342  397       351  397  458  

 64b-4t4c-ethip4vxlan-l2bdbasemaclrn- 
 eth-2vhostvr1024-1vm-vppl2xc-ndrpdr 

 1.  0.98       0.66 
 2.  4.42       2.97 
  
 3.   50  138  156        51  117  136  
 4.  136  159  173       104  133  150  
 5.  251  290  319       230  261  284