crypto¶
eth2p-ethip4ipsec11tnlsw-ip4base-int-aes128cbc-hmac512sha-dev¶
IPv4 IPsec tunnel mode test suite.
[Top] Network topologies: TG-DUT1 2-node topology with one link between nodes.
[Cfg] DUT configuration: On DUT1 create loopback interface, configure loopback an physical interface IPv4 addresses, static ARP record, route and IPsec manual keyed connection in tunnel mode.
[Ver] TG verification: ETH-IP4 packet is sent from TG to DUT1. Packet is received on TG from DUT1.
[Ref] Applicable standard specifications: RFC4303.
|
|
|---|---|
|
PASS |
eth2p-ethip4ipsec1tnlsw-ip4base-int-aes128cbc-hmac512sha-dev¶
IPv4 IPsec tunnel mode test suite.
[Top] Network topologies: TG-DUT1 2-node topology with one link between nodes.
[Cfg] DUT configuration: On DUT1 create loopback interface, configure loopback an physical interface IPv4 addresses, static ARP record, route and IPsec manual keyed connection in tunnel mode.
[Ver] TG verification: ETH-IP4 packet is sent from TG to DUT1. Packet is received on TG from DUT1.
[Ref] Applicable standard specifications: RFC4303.
|
|
|---|---|
|
PASS |
eth2p-ethip4ipsec1tnlsw-ip4base-policy-aes-128-cbc-sha-512-256-dev¶
IPv4 IPsec tunnel mode test suite.
[Top] Network topologies: TG-DUT1 2-node topology with one link between nodes.
[Cfg] DUT configuration: On DUT1 create loopback interface, configure loopback an physical interface IPv4 addresses, static ARP record, route and IPsec manual keyed connection in tunnel mode.
[Ver] TG verification: ESP packet is sent from TG to DUT1. ESP packet is received on TG from DUT1.
[Ref] Applicable standard specifications: RFC4303.
|
|
|---|---|
|
PASS |
eth2p-ethip4ipsec1tptsw-ip4base-policy-aes-128-cbc-sha-512-256-dev¶
IPv4 IPsec transport mode test suite.
[Top] Network topologies: TG-DUT1 2-node topology with one link between nodes.
[Cfg] DUT configuration: On DUT1 create loopback interface, configure loopback an physical interface IPv4 addresses, static ARP record, route and IPsec manual keyed connection in transport mode.
[Ver] TG verification: ESP packet is sent from TG to DUT1. ESP packet is received on TG from DUT1.
[Ref] Applicable standard specifications: RFC4303.
|
|
|---|---|
|
PASS |
eth2p-ethip6ipsec1tnlsw-ip6base-policy-aes-128-cbc-sha-512-256-dev¶
IPv6 IPsec tunnel mode test suite.
[Top] Network topologies: TG-DUT1 2-node topology with one link between nodes.
[Cfg] DUT configuration: On DUT1 create loopback interface, configure loopback an physical interface IPv6 addresses, static ARP record, route and IPsec manual keyed connection in tunnel mode.
[Ver] TG verification: ESP packet is sent from TG to DUT1. ESP packet is received on TG from DUT1.
[Ref] Applicable standard specifications: RFC4303.
|
|
|---|---|
|
PASS |
eth2p-ethip6ipsec1tptsw-ip6base-policy-aes-128-cbc-sha-512-256-dev¶
IPv6 IPsec transport mode test suite.
[Top] Network topologies: TG-DUT1 2-node topology with one link between nodes.
[Cfg] DUT configuration: On DUT1 create loopback interface, configure loopback an physical interface IPv6 addresses, static ARP record, route and IPsec manual keyed connection in transport mode.
[Ver] TG verification: ESP packet is sent from TG to DUT1. ESP packet is received on TG from DUT1.
[Ref] Applicable standard specifications: RFC4303.
|
|
|---|---|
|
PASS |