device¶
container memif¶
eth2p-ethicmpv4-ip4base-eth-2memif-1dcr-dev¶
eth2p-ethicmpv4-ip4base-eth-2memif-1dcr-dev¶
IPv4 routing test cases with memif interface
- [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4-ICMPv4 for IPv4 routing on both links.
- [Cfg] DUT configuration: DUT1 is configured with IPv4 routing and two static IPv4 /24 route entries. Container is connected to VPP via Memif interface. Container is running same VPP version as running on DUT.
- [Ver] TG verification: Test ICMPv4 Echo Request packets are sent in one direction by TG on links to DUT1 and via container; on receive TG verifies packets for correctness and their IPv4 src-addr, dst-addr and MAC addresses.
- [Ref] Applicable standard specifications: RFC791, RFC826, RFC792
Name | VPP API Test Commands History - Commands Used Per Test Case |
---|---|
64b-ethicmpv4-ip4base-eth-2memif-1dcr-dev |
|
eth2p-ethicmpv4-l2bdbasemaclrn-eth-2memif-1dcr-dev¶
eth2p-ethicmpv4-l2bdbasemaclrn-eth-2memif-1dcr-dev¶
L2 bridge-domain test cases with memif interface
- [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4-ICMPv4 for L2 switching of IPv4. Both apply to all links.
- [Cfg] DUT configuration: DUT1 is configured with L2 bridge-domain switching. Container is connected to VPP via Memif interface. Container is running same VPP version as running on DUT.
- [Ver] TG verification: Test ICMPv4 Echo Request packets are sent in both directions by TG on links to DUT1 and via container; on receive TG verifies packets for correctness and their IPv4 src-addr, dst-addr and MAC addresses.
- [Ref] Applicable standard specifications: RFC792
Name | VPP API Test Commands History - Commands Used Per Test Case |
---|---|
64b-ethicmpv4-l2bdbasemaclrn-eth-2memif-1dcr-dev |
|
eth2p-ethicmpv4-l2xcbase-eth-2memif-1dcr-dev¶
eth2p-ethicmpv4-l2xcbase-eth-2memif-1dcr-dev¶
L2 cross-connect test cases with memif interface
- [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4-ICMPv4 for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 is configured with L2 cross-connect (L2XC) switching. Container is connected to VPP via Memif interface. Container is running same VPP version as running on DUT.
- [Ver] TG verification: Test ICMPv4 Echo Request packets are sent in both directions by TG on links to DUT1 and via container; on receive TG verifies packets for correctness and their IPv4 src-addr, dst-addr and MAC addresses.
- [Ref] Applicable standard specifications: RFC792
Name | VPP API Test Commands History - Commands Used Per Test Case |
---|---|
64b-ethicmpv4-l2xcbase-eth-2memif-1dcr-dev |
|
eth2p-ethicmpv6-ip6base-eth-2memif-1dcr-dev¶
eth2p-ethicmpv6-ip6base-eth-2memif-1dcr-dev¶
IPv4 routing test cases with memif interface
- [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv6-ICMPv6 for IPv6 routing on both links.
- [Cfg] DUT configuration: DUT1 is configured with IPv6 routing and two static IPv6 /64 route entries. Container is connected to VPP via Memif interface. Container is running same VPP version as running on DUT.
- [Ver] TG verification: Test ICMPv6 Echo Request packets are sent in one direction by TG on links to DUT1 and via container; on receive TG verifies packets for correctness and their IPv6 src-addr, dst-addr and MAC addresses.
- [Ref] Applicable standard specifications: RFC791, RFC826, RFC792
Name | VPP API Test Commands History - Commands Used Per Test Case |
---|---|
78b-ethicmpv6-ip6base-eth-2memif-1dcr-dev |
|
crypto¶
eth2p-ethip4ipsec1tnlsw-ip4base-policy-aes-128-cbc-sha-512-256-dev¶
eth2p-ethip4ipsec1tnlsw-ip4base-policy-aes-128-cbc-sha-512-256-dev¶
IPv4 IPsec tunnel mode test suite.
- [Top] Network topologies: TG-DUT1 2-node topology with one link between nodes.
- [Cfg] DUT configuration: On DUT1 create loopback interface, configure loopback an physical interface IPv4 addresses, static ARP record, route and IPsec manual keyed connection in tunnel mode.
- [Ver] TG verification: ESP packet is sent from TG to DUT1. ESP packet is received on TG from DUT1.
- [Ref] Applicable standard specifications: RFC4303.
Name | VPP API Test Commands History - Commands Used Per Test Case |
---|---|
110b-ethip4ipsec1tnlsw-ip4base-policy-aes-128-cbc-sha-512-256-dev |
|
eth2p-ethip4ipsec1tptsw-ip4base-policy-aes-128-cbc-sha-512-256-dev¶
eth2p-ethip4ipsec1tptsw-ip4base-policy-aes-128-cbc-sha-512-256-dev¶
IPv4 IPsec transport mode test suite.
- [Top] Network topologies: TG-DUT1 2-node topology with one link between nodes.
- [Cfg] DUT configuration: On DUT1 create loopback interface, configure loopback an physical interface IPv4 addresses, static ARP record, route and IPsec manual keyed connection in transport mode.
- [Ver] TG verification: ESP packet is sent from TG to DUT1. ESP packet is received on TG from DUT1.
- [Ref] Applicable standard specifications: RFC4303.
Name | VPP API Test Commands History - Commands Used Per Test Case |
---|---|
110b-ethip4ipsec1tptsw-ip4base-policy-aes-128-cbc-sha-512-256-dev |
|
eth2p-ethip6ipsec1tnlsw-ip6base-policy-aes-128-cbc-sha-512-256-dev¶
eth2p-ethip6ipsec1tnlsw-ip6base-policy-aes-128-cbc-sha-512-256-dev¶
IPv6 IPsec tunnel mode test suite.
- [Top] Network topologies: TG-DUT1 2-node topology with one link between nodes.
- [Cfg] DUT configuration: On DUT1 create loopback interface, configure loopback an physical interface IPv6 addresses, static ARP record, route and IPsec manual keyed connection in tunnel mode.
- [Ver] TG verification: ESP packet is sent from TG to DUT1. ESP packet is received on TG from DUT1.
- [Ref] Applicable standard specifications: RFC4303.
Name | VPP API Test Commands History - Commands Used Per Test Case |
---|---|
124b-ethip6ipsec1tnlsw-ip6base-policy-aes-128-cbc-sha-512-256-dev |
|
eth2p-ethip6ipsec1tptsw-ip6base-policy-aes-128-cbc-sha-512-256-dev¶
eth2p-ethip6ipsec1tptsw-ip6base-policy-aes-128-cbc-sha-512-256-dev¶
IPv6 IPsec transport mode test suite.
- [Top] Network topologies: TG-DUT1 2-node topology with one link between nodes.
- [Cfg] DUT configuration: On DUT1 create loopback interface, configure loopback an physical interface IPv6 addresses, static ARP record, route and IPsec manual keyed connection in transport mode.
- [Ver] TG verification: ESP packet is sent from TG to DUT1. ESP packet is received on TG from DUT1.
- [Ref] Applicable standard specifications: RFC4303.
Name | VPP API Test Commands History - Commands Used Per Test Case |
---|---|
124b-ethip6ipsec1tptsw-ip6base-policy-aes-128-cbc-sha-512-256-dev |
|
interfaces¶
eth2p-ethicmpv4-ip4base-eth-1tap-dev¶
eth2p-ethicmpv4-ip4base-eth-1tap-dev¶
Tap Interface Traffic Tests
- [Top] Network Topologies: TG=DUT1 2-node topology with two links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4-ICMPv4 for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge-domain (L2BD) MAC learning enabled; Split Horizon Groups (SHG) are set depending on test case; Namespaces (NM) are set on DUT1 with attached linux-TAP.
- [Ver] TG verification: Test ICMPv4 Echo Request packets are sent by TG on link to DUT1; On receipt TG verifies packets for correctness and their IPv4 src-addr, dst-addr, and MAC addresses.
- [Ref] Applicable standard specifications:
Name | VPP API Test Commands History - Commands Used Per Test Case |
---|---|
64b-ethicmpv4-ip4base-eth-1tap-dev |
|
eth2p-ethicmpv4-ip4base-eth-1tap-namespace-dev¶
eth2p-ethicmpv4-ip4base-eth-1tap-namespace-dev¶
Tap Interface Traffic Tests
- [Top] Network Topologies: TG=DUT1 2-node topology with two links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4-ICMPv4 for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge-domain (L2BD) MAC learning enabled; Split Horizon Groups (SHG) are set depending on test case; Namespaces (NM) are set on DUT1 with attached linux-TAP.
- [Ver] TG verification: Test ICMPv4 Echo Request packets are sent by TG on link to DUT1; On receipt TG verifies packets for correctness and their IPv4 src-addr, dst-addr, and MAC addresses.
- [Ref] Applicable standard specifications:
Name | VPP API Test Commands History - Commands Used Per Test Case |
---|---|
64b-ethicmpv4-ip4base-eth-1tap-namespace-dev |
|
eth2p-ethicmpv4-l2bdbasemaclrn-eth-2tap-dev¶
eth2p-ethicmpv4-l2bdbasemaclrn-eth-2tap-dev¶
Tap Interface Traffic Tests
- [Top] Network Topologies: TG=DUT1 2-node topology with two links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4-ICMPv4 for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge-domain (L2BD) MAC learning enabled; Split Horizon Groups (SHG) are set depending on test case; Namespaces (NM) are set on DUT1 with attached linux-TAP.
- [Ver] TG verification: Test ICMPv4 Echo Request packets are sent by TG on link to DUT1; On receipt TG verifies packets for correctness and their IPv4 src-addr, dst-addr, and MAC addresses.
- [Ref] Applicable standard specifications:
Name | VPP API Test Commands History - Commands Used Per Test Case |
---|---|
64b-ethicmpv4-l2bdbasemaclrn-eth-2tap-dev |
|
ip4¶
eth2p-ethicmpv4-ip4base-dev¶
eth2p-ethicmpv4-ip4base-dev¶
IPv4 routing test cases
- [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4-ICMPv4 for IPv4 routing on both links.
- [Cfg] DUT configuration: DUT1 is configured with IPv4 routing and two static IPv4 /24 route entries.
- [Ver] TG verification: Test ICMPv4 Echo Request packets are sent in one direction by TG on links to DUT1; on receive TG verifies packets for correctness and their IPv4 src-addr, dst-addr and MAC addresses.
- [Ref] Applicable standard specifications: RFC791, RFC826, RFC792
Name | VPP API Test Commands History - Commands Used Per Test Case |
---|---|
64b-ethicmpv4-ip4base-dev |
|
eth2p-ethip4-ip4base-copblklistbase-dev¶
eth2p-ethip4-ip4base-copblklistbase-dev¶
COP Security IPv4 whitelist test cases
- [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4 on all links.
- [Cfg] DUT configuration: DUT1 is configured with IPv4 routing and static routes. COP security white-lists is applied on DUT1 ingress interface from TG.
- [Ver] TG verification: Test IPv4 packets are sent in one direction by TG on link to DUT1; on receive TG verifies packets for correctness and drops as applicable.
- [Ref] Applicable standard specifications:
Name | VPP API Test Commands History - Commands Used Per Test Case |
---|---|
64b-ethip4-ip4base-copblklistbase-dev |
|
eth2p-ethip4-ip4base-copwhtlistbase-dev¶
eth2p-ethip4-ip4base-copwhtlistbase-dev¶
COP Security IPv4 whitelist test cases
- [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4 on all links.
- [Cfg] DUT configuration: DUT1 is configured with IPv4 routing and static routes. COP security white-lists is applied on DUT1 ingress interface from TG.
- [Ver] TG verification: Test IPv4 packets are sent in one direction by TG on link to DUT1; on receive TG verifies packets for correctness and drops as applicable.
- [Ref] Applicable standard specifications:
Name | VPP API Test Commands History - Commands Used Per Test Case |
---|---|
64b-ethip4-ip4base-copwhtlistbase-dev |
|
eth2p-ethip4-ip4base-iacldstbase-dev¶
eth2p-ethip4-ip4base-iacldstbase-dev¶
IPv4 iAcl whitelist test cases
- [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4 on all links.
- [Cfg] DUT configuration: DUT1 is configured with IPv4 routing and static routes. IPv4 iAcl security whitelist is applied on DUT1 ingress interface from TG.
- [Ver] TG verification: Test IPv4 packets are sent in one direction by TG on link to DUT1; on receive TG verifies packets for correctness and drops as applicable.
- [Ref] Applicable standard specifications:
Name | VPP API Test Commands History - Commands Used Per Test Case |
---|---|
64b-ethip4-ip4base-iacldstbase-dev |
|
eth2p-ethip4-ip4base-ipolicemarkbase-dev¶
eth2p-ethip4-ip4base-ipolicemarkbase-dev¶
IPv4 policer test cases
- [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4 on all links.
- [Cfg] DUT configuration: On DUT1 configure interfaces IPv4 adresses, and static ARP record on the second interface. On DUT1 configure 2R3C color-aware policer on the first interface.
- [Ver] TG verification: Test packet is sent from TG on the first link to DUT1. Packet is received on TG on the second link from DUT1.
- [Ref] Applicable standard specifications: RFC2474, RFC2697, RFC2698.
Name | VPP API Test Commands History - Commands Used Per Test Case |
---|---|
64b-ethip4-ip4base-ipolicemarkbase-dev |
|
ip4 tunnels¶
eth2p-ethip4vxlan-l2bdbasemaclrn-dev¶
eth2p-ethip4vxlan-l2bdbasemaclrn-dev¶
L2BD with VXLANoIPv4 test cases
- [Top] Network topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.
- [Enc] Packet encapsulations: Eth-IPv4-VXLAN-Eth-IPv4-ICMPv4 on TG-DUT.
- [Cfg] DUT configuration: DUT1 is configured with L2 bridge-domain switching combined with MAC learning enable. VXLAN tunnels are configured on links betwen TG and DUT.
- [Ver] TG verification: Test Eth-IPv4-VXLAN-Eth-IPv4-ICMPv4 packet is sent by TG on link to DUT1; on receive TG verifies packets for correctness and their IPv4 src-addr, dst-addr and MAC addresses.
- [Ref] Applicable standard specifications: RFC7348.
Name | VPP API Test Commands History - Commands Used Per Test Case |
---|---|
114b-ethip4vxlan-l2bdbasemaclrn-dev |
|
eth2p-ethip4vxlan-l2xcbase-dev¶
eth2p-ethip4vxlan-l2xcbase-dev¶
L2XC with VXLANoIPv4 test cases
- [Top] Network topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.
- [Enc] Packet encapsulations: Eth-IPv4-VXLAN-Eth-IPv4-ICMPv4 on TG-DUT.
- [Cfg] DUT configuration: DUT1 is configured with L2 cross-connect. VXLAN tunnels are configured on links betwen TG and DUT.
- [Ver] TG verification: Test Eth-IPv4-VXLAN-Eth-IPv4-ICMPv4 packet is sent by TG on link to DUT1; on receive TG verifies packets for correctness and their IPv4 src-addr, dst-addr and MAC addresses.
- [Ref] Applicable standard specifications: RFC7348.
Name | VPP API Test Commands History - Commands Used Per Test Case |
---|---|
114b-ethip4vxlan-l2xcbase-dev |
|
ip6¶
eth2p-ethicmpv6-ip6base-dev¶
eth2p-ethicmpv6-ip6base-dev¶
IPv6 routing test cases
- [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv6-ICMPv6 for IPv6 routing on both links.
- [Cfg] DUT configuration: DUT1 is configured with IPv6 routing and two static IPv6 /64 route entries.
- [Ver] TG verification: Test ICMPv6 Echo Request packets are sent in one direction by TG on links to DUT1; on receive TG verifies packets for correctness and their IPv6 src-addr, dst-addr and MAC addresses.
- [Ref] Applicable standard specifications: RFC2460, RFC4443, RFC4861
Name | VPP API Test Commands History - Commands Used Per Test Case |
---|---|
78b-ethicmpv6-ip6base-dev |
|
eth2p-ethip6-ip6base-copblklistbase-dev¶
eth2p-ethip6-ip6base-copblklistbase-dev¶
COP Security IPv6 whitelist test cases
- [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv6 on all links.
- [Cfg] DUT configuration: DUT1 is configured with IPv6 routing and static routes. COP security white-lists are applied on DUT1 ingress interface from TG.
- [Ver] TG verification: Test IPv6 packets are sent in one direction by TG on link to DUT1; on receive TG verifies packets for correctness and drops as applicable.
- [Ref] Applicable standard specifications:
Name | VPP API Test Commands History - Commands Used Per Test Case |
---|---|
78b-ethip6-ip6base-copblklistbase-dev |
|
eth2p-ethip6-ip6base-copwhtlistbase-dev¶
eth2p-ethip6-ip6base-copwhtlistbase-dev¶
COP Security IPv6 whitelist test cases
- [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv6 on all links.
- [Cfg] DUT configuration: DUT1 is configured with IPv6 routing and static routes. COP security white-lists are applied on DUT1 ingress interface from TG.
- [Ver] TG verification: Test IPv6 packets are sent in one direction by TG on link to DUT1; on receive TG verifies packets for correctness and drops as applicable.
- [Ref] Applicable standard specifications:
Name | VPP API Test Commands History - Commands Used Per Test Case |
---|---|
78b-ethip6-ip6base-copwhtlistbase-dev |
|
eth2p-ethip6-ip6base-iacldstbase-dev¶
eth2p-ethip6-ip6base-iacldstbase-dev¶
IPv6 iAcl whitelist test cases
- [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv6 on all links.
- [Cfg] DUT configuration: DUT1 is configured with IPv6 routing and static routes. IPv6 iAcl security whitelist is applied on DUT1 ingress interface from TG.
- [Ver] TG verification: Test IPv6 packets are sent in one direction by TG on link to DUT1; on receive TG verifies packets for correctness and drops as applicable.
- [Ref] Applicable standard specifications:
Name | VPP API Test Commands History - Commands Used Per Test Case |
---|---|
78b-ethip6-ip6base-iacldstbase-dev |
|
eth2p-ethip6-ip6base-ipolicemarkbase-dev¶
eth2p-ethip6-ip6base-ipolicemarkbase-dev¶
IPv4 policer test cases
- [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv6 on all links.
- [Cfg] DUT configuration: On DUT1 configure interfaces IPv6 adresses, and static ARP record on the second interface. On DUT1 configure 2R3C color-aware policer on the first interface.
- [Ver] TG verification: Test packet is sent from TG on the first link to DUT1. Packet is received on TG on the second link from DUT1.
- [Ref] Applicable standard specifications: RFC2474, RFC2697, RFC2698.
Name | VPP API Test Commands History - Commands Used Per Test Case |
---|---|
78b-ethip6-ip6base-ipolicemarkbase-dev |
|
l2bd¶
eth2p-avf-dot1qip4-l2bdbasemaclrn-dev¶
eth2p-avf-dot1qip4-l2bdbasemaclrn-dev¶
IPv4 routing with IEEE 802.1Q test cases
- [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4 for IPv4 routing. IEEE 802.1Q tagging is applied on links between TG-DUT1.
- [Cfg] DUT configuration: DUT1 is configured with IPv4 routing and two static IPv4 /30 route entries. DUT1 is tested with virtual.
- [Ver] TG verification: Test IPv4 packets are sent in one direction by TG on link to DUT1; on receive TG verifies packets for correctness and drops as applicable.
- [Ref] Applicable standard specifications: IEEE 802.1q.
Name | VPP API Test Commands History - Commands Used Per Test Case |
---|---|
68b-avf-dot1qip4-l2bdbasemaclrn-dev |
|
eth2p-ethicmpv4-l2bdbasemaclrn-dev¶
eth2p-ethicmpv4-l2bdbasemaclrn-dev¶
L2 bridge-domain test cases
- [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4-ICMPv4 for L2 switching of IPv4. Both apply to all links.
- [Cfg] DUT configuration: DUT1 is configured with L2 bridge-domain switching.
- [Ver] TG verification: Test ICMPv4 Echo Request packets are sent in both directions by TG on links to DUT1; on receive TG verifies packets for correctness and their IPv4 src-addr, dst-addr and MAC addresses.
- [Ref] Applicable standard specifications: RFC792
Name | VPP API Test Commands History - Commands Used Per Test Case |
---|---|
64b-ethicmpv4-l2bdbasemaclrn-dev |
|
l2xc¶
eth2p-ethicmpv4-l2xcbase-dev¶
eth2p-ethicmpv4-l2xcbase-dev¶
L2 cross-connect test cases
- [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4-ICMPv4 for L2 switching of IPv4. Both apply to all links.
- [Cfg] DUT configuration: DUT1 is configured with L2 cross-connect switching.
- [Ver] TG verification: Test ICMPv4 Echo Request packets are sent in both directions by TG on links to DUT1; on receive TG verifies packets for correctness and their IPv4 src-addr, dst-addr and MAC addresses.
- [Ref] Applicable standard specifications: RFC792
Name | VPP API Test Commands History - Commands Used Per Test Case |
---|---|
64b-ethicmpv4-l2xcbase-dev |
|
vm vhost¶
ip4¶
eth2p-ethicmpv4-ip4base-eth-2vhost-1vm-dev¶
eth2p-ethicmpv4-ip4base-eth-2vhost-1vm-dev¶
IPv4 routing test cases with vhost user interface
- [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with VM and single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4-ICMPv4 for IPv4 routing on both links.
- [Cfg] DUT configuration: DUT1 is configured with IPv4 routing and two static IPv4 /24 route entries. Qemu Guest is connected to VPP via vhost-user interfaces. Guest is running VPP ip4 interconnecting vhost-user interfaces.
- [Ver] TG verification: Test ICMPv4 Echo Request packets are sent in one direction by TG on links to DUT1; on receive TG verifies packets for correctness and their IPv4 src-addr, dst-addr and MAC addresses.
- [Ref] Applicable standard specifications: RFC791, RFC826, RFC792
Name | VPP API Test Commands History - Commands Used Per Test Case |
---|---|
64b-ethicmp4-ip4base-eth-2vhost-1vm-dev |
|
ip6¶
eth2p-ethicmpv6-ip6base-eth-2vhost-1vm-dev¶
eth2p-ethicmpv6-ip6base-eth-2vhost-1vm-dev¶
IPv4 routing test cases with vhost user interface
- [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with VM and single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv6-ICMPv6 for IPv6 routing on both links.
- [Cfg] DUT configuration: DUT1 is configured with IPv6 routing and two static IPv6 /64 route entries. Qemu Guest is connected to VPP via vhost-user interfaces. Guest is running VPP ip6 interconnecting vhost-user interfaces.
- [Ver] TG verification: Test ICMPv6 Echo Request packets are sent in one direction by TG on links to DUT1; on receive TG verifies packets for correctness and their IPv6 src-addr, dst-addr and MAC addresses.
- [Ref] Applicable standard specifications: RFC2460, RFC4443, RFC4861
Name | VPP API Test Commands History - Commands Used Per Test Case |
---|---|
64b-ethicmpv6-ip6base-eth-2vhost-1vm-dev |
|
l2bd¶
eth2p-ethicmpv4-l2bdbasemaclrn-eth-2vhost-1vm-dev¶
eth2p-ethicmpv4-l2bdbasemaclrn-eth-2vhost-1vm-dev¶
L2 bridge-domain test cases with vhost user interface
- [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with VM and single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4-ICMPv4 for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 is configured with two L2 bridge-domains (L2BD) switching combined with MAC learning enabled. Qemu Guest is connected to VPP via vhost-user interfaces. Guest is configured with VPP l2 cross-connect interconnecting vhost-user interfaces.
- [Ver] TG verification: Test ICMPv4 Echo Request packets are sent in both directions by TG on links to DUT1 via VM; on receive TG verifies packets for correctness and their IPv4 src-addr, dst-addr and MAC addresses.
- [Ref] Applicable standard specifications: RFC792
Name | VPP API Test Commands History - Commands Used Per Test Case |
---|---|
64b-ethicmpv4-l2bdbasemaclrn-eth-2vhost-1vm-dev |
|
l2xc¶
eth2p-ethicmpv4-l2xcbase-eth-2vhost-1vm-dev¶
eth2p-ethicmpv4-l2xcbase-eth-2vhost-1vm-dev¶
L2 cross-connect test cases with vhost user interface
- [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with VM and single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4-ICMPv4 for L2 switching of IPv4.
- [Cfg] DUT configuration: DUT1 is configured with L2 cross-connect (L2XC) switching. Qemu Guest is connected to VPP via vhost-user interfaces. Guest is configured with VPP l2 cross-connect interconnecting vhost-user interfaces.
- [Ver] TG verification: Test ICMPv4 Echo Request packets are sent in both directions by TG on links to DUT1 via VM; on receive TG verifies packets for correctness and their IPv4 src-addr, dst-addr and MAC addresses.
- [Ref] Applicable standard specifications: RFC792
Name | VPP API Test Commands History - Commands Used Per Test Case |
---|---|
64b-ethicmpv4-l2xcbase-eth-2vhost-1vm-dev |
|