device¶
eth2p-ethicmp-l2xcbase-device¶
L2 cross-connect test cases
- [Top] Network Topologies: TG-DUT1-TG 2-node circular topology with single links between nodes.
- [Enc] Packet Encapsulations: Eth-IPv4-ICMPv4 for L2 switching of IPv4; Eth-IPv6-ICMPv6 for L2 switching of IPv6 use. Both apply to all links.
- [Cfg] DUT configuration: DUT1 is configured with L2 cross-connect switching.
- [Ver] TG verification: Test ICMPv4 (or ICMPv6) Echo Request packets are sent in both directions by TG on links to DUT1; on receive TG verifies packets for correctness and their IPv4 (IPv6) src-addr, dst-addr and MAC addresses.
- [Ref] Applicable standard specifications: rfc792
Name | Documentation | Status |
---|---|---|
eth2p-ethicmpv4-l2xcbase-device | [Top] TG-DUT1-TG. [Enc] Eth-IPv4-ICMPv4. [Cfg] On DUT1 configure L2 cross-connect (L2XC), with both interfaces to TG. [Ver] Make TG send ICMPv4 Echo Req in both directions between two of its interfaces to be switched by DUT1; verify all packets are received. |
PASS |
eth2p-ethicmpv6-l2xcbase-device | [Top] TG-DUT1-TG. [Enc] Eth-IPv4-ICMPv6. [Cfg] On DUT1 configure L2 cross-connect (L2XC), with both interfaces to TG. [Ver] Make TG send ICMPv4 Echo Req in both directions between two of its interfaces to be switched by DUT1; verify all packets are received. |
PASS |