7.2.1. container memif

7.2.1.1. 10ge2p1x520-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr

Raw results L2BD test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 bridge domain.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with two L2 bridge domains and MAC learning enabled. LXC is connected to VPP via Memif interface. LXC is running same VPP version as running on DUT. LXC is limited via cgroup to use 3 cores allocated from pool of isolated CPUs. There are no memory constraints. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel.
  • [Ver] TG verification: In MaxReceivedRate test TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
Name Documentation Status
tc01-64b-1t1c-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618892, rx 41127011
tc02-1518b-1t1c-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254852, rx 16107407
tc03-9000b-1t1c-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc04-imix-1t1c-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B;16x570B;4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 32402936
tc05-64b-2t2c-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618911, rx 84106972
tc06-1518b-2t2c-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr [Cfg] DUT runs L2BD switching config with 2 threads, 1 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc07-9000b-2t2c-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr [Cfg] DUT runs L2BD switching config with 2 threads, 1 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc08-imix-2t2c-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B;16x570B;4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 65256580
tc09-64b-4t4c-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618911, rx 165440597
tc10-1518b-4t4c-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc11-9000b-4t4c-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc12-imix-4t4c-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B;16x570B;4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722

7.2.1.2. 10ge2p1x520-eth-l2xcbase-eth-2memif-1dcr-mrr

Raw results L2XC test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 cross connect.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 cross- connect. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel. Container is connected to VPP via Memif interface. Container is running same VPP version as running on DUT. Container is limited via cgroup to use 3 cores allocated from pool of isolated CPUs. There are no memory contraints.
  • [Ver] TG verification: In MaxReceivedRate test TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
Name Documentation Status
tc01-64b-1t1c-eth-l2xcbase-eth-2memif-1dcr-mrr [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618892, rx 48893569
tc02-1518b-1t1c-eth-l2xcbase-eth-2memif-1dcr-mrr [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254852, rx 16254330
tc03-9000b-1t1c-eth-l2xcbase-eth-2memif-1dcr-mrr [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc04-imix-1t1c-eth-l2xcbase-eth-2memif-1dcr-mrr [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B;16x570B;4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 36787273
tc05-64b-2t2c-eth-l2xcbase-eth-2memif-1dcr-mrr [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618911, rx 100657180
tc06-1518b-2t2c-eth-l2xcbase-eth-2memif-1dcr-mrr [Cfg] DUT runs L2XC switching config with 2 threads, 1 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc07-9000b-2t2c-eth-l2xcbase-eth-2memif-1dcr-mrr [Cfg] DUT runs L2XC switching config with 2 threads, 1 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc08-imix-2t2c-eth-l2xcbase-eth-2memif-1dcr-mrr [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B;16x570B;4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722
tc09-64b-4t4c-eth-l2xcbase-eth-2memif-1dcr-mrr [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618911, rx 199555512
tc10-1518b-4t4c-eth-l2xcbase-eth-2memif-1dcr-mrr [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc11-9000b-4t4c-eth-l2xcbase-eth-2memif-1dcr-mrr [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc12-imix-4t4c-eth-l2xcbase-eth-2memif-1dcr-mrr [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B;16x570B;4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722

7.2.1.3. 10ge2p1x520-eth-l2xcbase-eth-2memif-1lxc-mrr

Raw results L2XC test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 cross connect.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 cross- connect. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel. LXC is connected to VPP via Memif interface. LXC is running same VPP version as running on DUT. LXC is limited via cgroup to use 3 cores allocated from pool of isolated CPUs. There are no memory contraints.
  • [Ver] TG verification: In MaxReceivedRate test TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
Name Documentation Status
tc01-64b-1t1c-eth-l2xcbase-eth-2memif-1lxc-mrr [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618892, rx 48666490
tc02-1518b-1t1c-eth-l2xcbase-eth-2memif-1lxc-mrr [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254852, rx 16254619
tc03-9000b-1t1c-eth-l2xcbase-eth-2memif-1lxc-mrr [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc04-imix-1t1c-eth-l2xcbase-eth-2memif-1lxc-mrr [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B;16x570B;4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 36938811
tc05-64b-2t2c-eth-l2xcbase-eth-2memif-1lxc-mrr [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618911, rx 100127174
tc06-1518b-2t2c-eth-l2xcbase-eth-2memif-1lxc-mrr [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc07-9000b-2t2c-eth-l2xcbase-eth-2memif-1lxc-mrr [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc08-imix-2t2c-eth-l2xcbase-eth-2memif-1lxc-mrr [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B;16x570B;4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722
tc09-64b-4t4c-eth-l2xcbase-eth-2memif-1lxc-mrr [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618911, rx 198886479
tc10-1518b-4t4c-eth-l2xcbase-eth-2memif-1lxc-mrr [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc11-9000b-4t4c-eth-l2xcbase-eth-2memif-1lxc-mrr [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc12-imix-4t4c-eth-l2xcbase-eth-2memif-1lxc-mrr [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B;16x570B;4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722

7.2.1.4. 10ge2p1x710-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr

Raw results L2BD test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 bridge domain.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with two L2 bridge domains and MAC learning enabled. LXC is connected to VPP via Memif interface. LXC is running same VPP version as running on DUT. LXC is limited via cgroup to use 3 cores allocated from pool of isolated CPUs. There are no memory constraints. DUT1 and DUT2 tested with 2p10GE NIC X710 by Intel.
  • [Ver] TG verification: In MaxReceivedRate test TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
Name Documentation Status
tc01-64b-1t1c-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618892, rx 41058673
tc02-1518b-1t1c-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254852, rx 16135552
tc03-9000b-1t1c-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc04-imix-1t1c-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B;16x570B;4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 31928152
tc05-64b-2t2c-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618911, rx 83981189
tc06-1518b-2t2c-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr [Cfg] DUT runs L2BD switching config with 2 threads, 1 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc07-9000b-2t2c-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr [Cfg] DUT runs L2BD switching config with 2 threads, 1 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc08-imix-2t2c-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B;16x570B;4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 64724460
tc09-64b-4t4c-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618911, rx 162339890
tc10-1518b-4t4c-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc11-9000b-4t4c-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc12-imix-4t4c-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B;16x570B;4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722

7.2.1.5. 10ge2p1x710-eth-l2xcbase-eth-2memif-1dcr-mrr

Raw results L2XC test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 cross connect.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 cross- connect. DUT1 and DUT2 tested with 2p10GE NIC X710 by Intel. Container is connected to VPP via Memif interface. Container is running same VPP version as running on DUT. Container is limited via cgroup to use 3 cores allocated from pool of isolated CPUs. There are no memory contraints.
  • [Ver] TG verification: In MaxReceivedRate test TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
Name Documentation Status
tc01-64b-1t1c-eth-l2xcbase-eth-2memif-1dcr-mrr [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618892, rx 48379824
tc02-1518b-1t1c-eth-l2xcbase-eth-2memif-1dcr-mrr [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254852, rx 16254852
tc03-9000b-1t1c-eth-l2xcbase-eth-2memif-1dcr-mrr [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771599, rx 2771599
tc04-imix-1t1c-eth-l2xcbase-eth-2memif-1dcr-mrr [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B;16x570B;4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 36357276
tc05-64b-2t2c-eth-l2xcbase-eth-2memif-1dcr-mrr [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618911, rx 100095054
tc06-1518b-2t2c-eth-l2xcbase-eth-2memif-1dcr-mrr [Cfg] DUT runs L2XC switching config with 2 threads, 1 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc07-9000b-2t2c-eth-l2xcbase-eth-2memif-1dcr-mrr [Cfg] DUT runs L2XC switching config with 2 threads, 1 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc08-imix-2t2c-eth-l2xcbase-eth-2memif-1dcr-mrr [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B;16x570B;4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874658
tc09-64b-4t4c-eth-l2xcbase-eth-2memif-1dcr-mrr [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618911, rx 195083600
tc10-1518b-4t4c-eth-l2xcbase-eth-2memif-1dcr-mrr [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc11-9000b-4t4c-eth-l2xcbase-eth-2memif-1dcr-mrr [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc12-imix-4t4c-eth-l2xcbase-eth-2memif-1dcr-mrr [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B;16x570B;4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874562

7.2.1.6. 10ge2p1x710-eth-l2xcbase-eth-2memif-1lxc-mrr

Raw results L2XC test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 cross connect.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 cross- connect. DUT1 and DUT2 tested with 2p10GE NIC X710 by Intel. LXC is connected to VPP via Memif interface. LXC is running same VPP version as running on DUT. LXC is limited via cgroup to use 3 cores allocated from pool of isolated CPUs. There are no memory contraints.
  • [Ver] TG verification: In MaxReceivedRate test TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
Name Documentation Status
tc01-64b-1t1c-eth-l2xcbase-eth-2memif-1lxc-mrr [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618892, rx 48611315
tc02-1518b-1t1c-eth-l2xcbase-eth-2memif-1lxc-mrr [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254852, rx 16254852
tc03-9000b-1t1c-eth-l2xcbase-eth-2memif-1lxc-mrr [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc04-imix-1t1c-eth-l2xcbase-eth-2memif-1lxc-mrr [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B;16x570B;4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 36187166
tc05-64b-2t2c-eth-l2xcbase-eth-2memif-1lxc-mrr [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618911, rx 100027104
tc06-1518b-2t2c-eth-l2xcbase-eth-2memif-1lxc-mrr [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc07-9000b-2t2c-eth-l2xcbase-eth-2memif-1lxc-mrr [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc08-imix-2t2c-eth-l2xcbase-eth-2memif-1lxc-mrr [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B;16x570B;4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722
tc09-64b-4t4c-eth-l2xcbase-eth-2memif-1lxc-mrr [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618911, rx 195326455
tc10-1518b-4t4c-eth-l2xcbase-eth-2memif-1lxc-mrr [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc11-9000b-4t4c-eth-l2xcbase-eth-2memif-1lxc-mrr [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc12-imix-4t4c-eth-l2xcbase-eth-2memif-1lxc-mrr [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B;16x570B;4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722

7.2.1.7. 40ge2p1xl710-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr

Raw results L2BD test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 bridge domain.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with two L2 bridge domains and MAC learning enabled. LXC is connected to VPP via Memif interface. LXC is running same VPP version as running on DUT. LXC is limited via cgroup to use 3 cores allocated from pool of isolated CPUs. There are no memory constraints. DUT1 and DUT2 tested with 2p40GE NIC XL710 by Intel.
  • [Ver] TG verification: In MaxReceivedRate test TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
Name Documentation Status
tc01-64b-1t1c-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 374999813, rx 43764434
tc02-1518b-1t1c-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 39824422, rx 18153740
tc03-9000b-1t1c-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 6790458, rx 5063085
tc04-imix-1t1c-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B;16x570B;4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 163843066, rx 39627025
tc05-64b-2t2c-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 374999842, rx 84439799
tc06-1518b-2t2c-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 39824423, rx 37903867
tc07-9000b-2t2c-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 6790458, rx 6790458
tc08-imix-2t2c-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B;16x570B;4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 163843066, rx 80076703
tc09-64b-4t4c-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 374999786, rx 165224486
tc10-1518b-4t4c-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 39824421, rx 39822161
tc11-9000b-4t4c-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 6790459, rx 6790459
tc12-imix-4t4c-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B;16x570B;4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 163843066, rx 153223100

7.2.1.8. 40ge2p1xl710-eth-l2xcbase-eth-2memif-1lxc-mrr

Raw results L2XC test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 cross connect.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 cross- connect. DUT1 and DUT2 tested with 2p40GE NIC XL710 by Intel. LXC is connected to VPP via Memif interface. LXC is running same VPP version as running on DUT. LXC is limited via cgroup to use 3 cores allocated from pool of isolated CPUs. There are no memory contraints.
  • [Ver] TG verification: In MaxReceivedRate test TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
Name Documentation Status
tc01-64b-1t1c-eth-l2xcbase-eth-2memif-1lxc-mrr [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 374999813, rx 52745225
tc02-1518b-1t1c-eth-l2xcbase-eth-2memif-1lxc-mrr [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 39824422, rx 19450683
tc03-9000b-1t1c-eth-l2xcbase-eth-2memif-1lxc-mrr [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 6790458, rx 4817215
tc04-imix-1t1c-eth-l2xcbase-eth-2memif-1lxc-mrr [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B;16x570B;4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 163843066, rx 45055321
tc05-64b-2t2c-eth-l2xcbase-eth-2memif-1lxc-mrr [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 374999842, rx 105709913
tc06-1518b-2t2c-eth-l2xcbase-eth-2memif-1lxc-mrr [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 39824423, rx 39769196
tc07-9000b-2t2c-eth-l2xcbase-eth-2memif-1lxc-mrr [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 6790458, rx 6790458
tc08-imix-2t2c-eth-l2xcbase-eth-2memif-1lxc-mrr [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B;16x570B;4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 163843066, rx 91694045
tc09-64b-4t4c-eth-l2xcbase-eth-2memif-1lxc-mrr [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 374999786, rx 201422542
tc10-1518b-4t4c-eth-l2xcbase-eth-2memif-1lxc-mrr [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 39824421, rx 39821964
tc11-9000b-4t4c-eth-l2xcbase-eth-2memif-1lxc-mrr [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 6790459, rx 6790459
tc12-imix-4t4c-eth-l2xcbase-eth-2memif-1lxc-mrr [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B;16x570B;4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 163843066, rx 163806800

7.2.2. crypto

7.2.2.1. 40ge2p1xl710-ethip4ipsecbasetnl-ip4base-int-aes-gcm-mrr

Raw results IPv4 IPsec tunnel mode performance test suite.

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4 on TG-DUTn, Eth-IPv4-IPSec on DUT1-DUT2
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it and send to another DUT, where packets are decrypted and sent back to TG
  • [Ver] TG verification: In MaxReceivedRate test TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, number of flows per flow-group equals to number of IPSec tunnels) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces. Incrementing of IP.dst (IPv4 destination address) field is applied to both streams.
  • [Ref] Applicable standard specifications: RFC4303 and RFC2544.
Name Documentation Status
tc01-64b-1t1c-ethip4ipsecbasetnl-ip4base-int-aes-gcm-mrr [Cfg] DUTs run 1 IPsec tunnel AES GCM in each direction, configured with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 374999814, rx 66592868
tc02-1518b-1t1c-ethip4ipsecbasetnl-ip4base-int-aes-gcm-mrr [Cfg] DUTs run 1 IPsec tunnel AES GCM in each direction, configured with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 38473583, rx 34042737
tc04-imix-1t1c-ethip4ipsecbasetnl-ip4base-int-aes-gcm-mrr [Cfg] DUTs run 1 IPsec tunnel AES GCM in each direction, configured with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 143163224, rx 35438042
tc05-64b-2t2c-ethip4ipsecbasetnl-ip4base-int-aes-gcm-mrr [Cfg] DUTs run 1 IPsec tunnel AES GCM in each direction, configured with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 374999813, rx 137326981
tc06-1518b-2t2c-ethip4ipsecbasetnl-ip4base-int-aes-gcm-mrr [Cfg] DUTs run 1 IPsec tunnel AES GCM in each direction, configured with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 38473581, rx 33767386
tc08-imix-2t2c-ethip4ipsecbasetnl-ip4base-int-aes-gcm-mrr [Cfg] DUTs run 1 IPsec tunnel AES GCM in each direction, configured with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 143163224, rx 70868406
tc09-64b-4t4c-ethip4ipsecbasetnl-ip4base-int-aes-gcm-mrr [Cfg] DUTs run 1 IPsec tunnel AES GCM in each direction, configured with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 374999842, rx 137418883
tc10-1518b-4t4c-ethip4ipsecbasetnl-ip4base-int-aes-gcm-mrr [Cfg] DUTs run 1 IPsec tunnel AES GCM in each direction, configured with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 38473583, rx 33904386
tc12-imix-4t4c-ethip4ipsecbasetnl-ip4base-int-aes-gcm-mrr [Cfg] DUTs run 1 IPsec tunnel AES GCM in each direction, configured with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 143163224, rx 71322017

7.2.2.2. 40ge2p1xl710-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-mrr

Raw results IPv4 IPsec tunnel mode performance test suite.

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4 on TG-DUTn, Eth-IPv4-IPSec on DUT1-DUT2
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it and send to another DUT, where packets are decrypted and sent back to TG
  • [Ver] TG verification: In MaxReceivedRate test TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, number of flows per flow-group equals to number of IPSec tunnels) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces. Incrementing of IP.dst (IPv4 destination address) field is applied to both streams.
  • [Ref] Applicable standard specifications: RFC4303 and RFC2544.
Name Documentation Status
tc01-64b-1t1c-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-mrr [Cfg] DUTs run 1 IPsec tunnel CBC-SHA1 in each direction, configured with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 374999814, rx 66087967
tc02-1518b-1t1c-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-mrr [Cfg] DUTs run 1 IPsec tunnel CBC-SHA1 in each direction, configured with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 38377162, rx 35091935
tc04-imix-1t1c-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-mrr [Cfg] DUTs run 1 IPsec tunnel CBC-SHA1 in each direction, configured with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 141837120, rx 34694642
tc05-64b-2t2c-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-mrr [Cfg] DUTs run 1 IPsec tunnel CBC-SHA1 in each direction, configured with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 374999813, rx 134269605
tc06-1518b-2t2c-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-mrr [Cfg] DUTs run 1 IPsec tunnel CBC-SHA1 in each direction, configured with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 38377162, rx 35307066
tc08-imix-2t2c-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-mrr [Cfg] DUTs run 1 IPsec tunnel CBC-SHA1 in each direction, configured with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 141837122, rx 71401302
tc09-64b-4t4c-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-mrr [Cfg] DUTs run 1 IPsec tunnel CBC-SHA1 in each direction, configured with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 374999842, rx 132508212
tc10-1518b-4t4c-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-mrr [Cfg] DUTs run 1 IPsec tunnel CBC-SHA1 in each direction, configured with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 38377163, rx 35563300
tc12-imix-4t4c-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-mrr [Cfg] DUTs run 1 IPsec tunnel CBC-SHA1 in each direction, configured with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 141837120, rx 70200348

7.2.2.3. 40ge2p1xl710-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-mrr

Raw results IPv4 IPsec tunnel mode performance test suite.

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4 on TG-DUTn, Eth-IPv4-IPSec on DUT1-DUT2
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with DPDK SW crypto devices and multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it and send to another DUT, where packets are decrypted and sent back to TG
  • [Ver] TG verification: In MaxReceivedRate test TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, number of flows per flow-group equals to number of IPSec tunnels) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces. Incrementing of IP.dst (IPv4 destination address) field is applied to both streams.
  • [Ref] Applicable standard specifications: RFC4303 and RFC2544.
Name Documentation Status
tc01-64b-1t1c-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-mrr [Cfg] DUTs run 1 IPsec tunnel AES GCM in each direction, configured with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 374999813, rx 45997872
tc02-1518b-1t1c-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-mrr [Cfg] DUTs run 1 IPsec tunnel AES GCM in each direction, configured with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 38473583, rx 9585006
tc04-imix-1t1c-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-mrr [Cfg] DUTs run 1 IPsec tunnel AES GCM in each direction, configured with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 143163224, rx 19682753
tc05-64b-2t2c-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-mrr [Cfg] DUTs run 1 IPsec tunnel AES GCM in each direction, configured with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 374999842, rx 112478184
tc06-1518b-2t2c-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-mrr [Cfg] DUTs run 1 IPsec tunnel AES GCM in each direction, configured with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 38473583, rx 19087292
tc08-imix-2t2c-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-mrr [Cfg] DUTs run 1 IPsec tunnel AES GCM in each direction, configured with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 143163224, rx 39781593
tc09-64b-4t4c-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-mrr [Cfg] DUTs run 1 IPsec tunnel AES GCM in each direction, configured with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 374999842, rx 108371689
tc10-1518b-4t4c-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-mrr [Cfg] DUTs run 1 IPsec tunnel AES GCM in each direction, configured with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 38473583, rx 18992640
tc12-imix-4t4c-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-mrr [Cfg] DUTs run 1 IPsec tunnel AES GCM in each direction, configured with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 143163222, rx 39433938

7.2.2.4. 40ge2p1xl710-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-mrr

Raw results IPv4 IPsec tunnel mode performance test suite.

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4 on TG-DUTn, Eth-IPv4-IPSec on DUT1-DUT2
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with DPDK SW crypto devices and multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it and send to another DUT, where packets are decrypted and sent back to TG
  • [Ver] TG verification: In MaxReceivedRate test TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, number of flows per flow-group equals to number of IPSec tunnels) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces. Incrementing of IP.dst (IPv4 destination address) field is applied to both streams.
  • [Ref] Applicable standard specifications: RFC4303 and RFC2544.
Name Documentation Status
tc01-64b-1t1c-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-mrr [Cfg] DUTs run 1 IPsec tunnel CBC-SHA1 in each direction, configured with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 374999814, rx 32639601
tc02-1518b-1t1c-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-mrr [Cfg] DUTs run 1 IPsec tunnel CBC-SHA1 in each direction, configured with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 38473583, rx 5873811
tc04-imix-1t1c-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-mrr [Cfg] DUTs run 1 IPsec tunnel CBC-SHA1 in each direction, configured with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 143163224, rx 11932454
tc05-64b-2t2c-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-mrr [Cfg] DUTs run 1 IPsec tunnel CBC-SHA1 in each direction, configured with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 374999813, rx 69485675
tc06-1518b-2t2c-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-mrr [Cfg] DUTs run 1 IPsec tunnel CBC-SHA1 in each direction, configured with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 38473581, rx 11288071
tc08-imix-2t2c-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-mrr [Cfg] DUTs run 1 IPsec tunnel CBC-SHA1 in each direction, configured with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 143163224, rx 24515487
tc09-64b-4t4c-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-mrr [Cfg] DUTs run 1 IPsec tunnel CBC-SHA1 in each direction, configured with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 374999842, rx 64410974
tc10-1518b-4t4c-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-mrr [Cfg] DUTs run 1 IPsec tunnel CBC-SHA1 in each direction, configured with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 38473583, rx 11762635
tc12-imix-4t4c-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-mrr [Cfg] DUTs run 1 IPsec tunnel CBC-SHA1 in each direction, configured with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 143163224, rx 24310133

7.2.2.5. 40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-mrr

Raw results IPv4 IPsec tunnel mode performance test suite.

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4 on TG-DUTn, Eth-IPv4-IPSec on DUT1-DUT2
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it and send to another DUT, where packets are decrypted and sent back to TG
  • [Ver] TG verification: In MaxReceivedRate test TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, number of flows per flow-group equals to number of IPSec tunnels) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces. Incrementing of IP.dst (IPv4 destination address) field is applied to both streams.
  • [Ref] Applicable standard specifications: RFC4303 and RFC2544.
Name Documentation Status
tc01-64b-1t1c-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-mrr [Cfg] DUTs run 1000 IPsec tunnels AES GCM in each direction, configured with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 374999814, rx 26348108
tc02-1518b-1t1c-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-mrr [Cfg] DUTs run 1000 IPsec tunnels AES GCM in each direction, configured with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 38473583, rx 26193585
tc04-imix-1t1c-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-mrr [Cfg] DUTs run 1000 IPsec tunnels AES GCM in each direction, configured with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 143163224, rx 25278623
tc05-64b-2t2c-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-mrr [Cfg] DUTs run 1000 IPsec tunnels AES GCM in each direction, configured with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 374999813, rx 48683968
tc06-1518b-2t2c-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-mrr [Cfg] DUTs run 1000 IPsec tunnels AES GCM in each direction, configured with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 38473581, rx 34763004
tc08-imix-2t2c-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-mrr [Cfg] DUTs run 1000 IPsec tunnels AES GCM in each direction, configured with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 143163224, rx 49244663
tc09-64b-4t4c-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-mrr [Cfg] DUTs run 1000 IPsec tunnels AES GCM in each direction, configured with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 374999842, rx 47255532
tc10-1518b-4t4c-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-mrr [Cfg] DUTs run 1000 IPsec tunnels AES GCM in each direction, configured with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 38473583, rx 33083186
tc12-imix-4t4c-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-mrr [Cfg] DUTs run 1000 IPsec tunnels AES GCM in each direction, configured with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 143163224, rx 48549384

7.2.2.6. 40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-mrr

Raw results IPv4 IPsec tunnel mode performance test suite.

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4 on TG-DUTn, Eth-IPv4-IPSec on DUT1-DUT2
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with multiple IPsec tunnels between them. DUTs get IPv4 traffic from TG, encrypt it and send to another DUT, where packets are decrypted and sent back to TG
  • [Ver] TG verification: In MaxReceivedRate test TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, number of flows per flow-group equals to number of IPSec tunnels) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces. Incrementing of IP.dst (IPv4 destination address) field is applied to both streams.
  • [Ref] Applicable standard specifications: RFC4303 and RFC2544.
Name Documentation Status
tc01-64b-1t1c-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-mrr [Cfg] DUTs run 1000 IPsec tunnels CBC-SHA1 in each direction, configured with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 374999814, rx 25866496
tc02-1518b-1t1c-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-mrr [Cfg] DUTs run 1000 IPsec tunnels CBC-SHA1 in each direction, configured with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 38377162, rx 25248585
tc04-imix-1t1c-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-mrr [Cfg] DUTs run 1000 IPsec tunnels CBC-SHA1 in each direction, configured with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 141837122, rx 24712262
tc05-64b-2t2c-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-mrr [Cfg] DUTs run 1000 IPsec tunnels CBC-SHA1 in each direction, configured with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 374999813, rx 48616640
tc06-1518b-2t2c-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-mrr [Cfg] DUTs run 1000 IPsec tunnels CBC-SHA1 in each direction, configured with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 38377162, rx 36552368
tc08-imix-2t2c-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-mrr [Cfg] DUTs run 1000 IPsec tunnels CBC-SHA1 in each direction, configured with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 141837120, rx 48276406
tc09-64b-4t4c-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-mrr [Cfg] DUTs run 1000 IPsec tunnels CBC-SHA1 in each direction, configured with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 374999842, rx 47643312
tc10-1518b-4t4c-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-mrr [Cfg] DUTs run 1000 IPsec tunnels CBC-SHA1 in each direction, configured with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 38377163, rx 35851705
tc12-imix-4t4c-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-mrr [Cfg] DUTs run 1000 IPsec tunnels CBC-SHA1 in each direction, configured with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 141837120, rx 47083826

7.2.3. ip4

7.2.3.1. 10ge2p1x520-ethip4-ip4base-copwhtlistbase-mrr

Raw results IPv4 whitelist test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4 for IPv4 routing.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing, two static IPv4 /24 routes and IPv4 COP security whitelist ingress /24 filter entries applied on links TG - DUT1 and DUT2 - TG. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel.
  • [Ver] TG verification: In MaxReceivedRate test TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
  • [Ref] Applicable standard specifications: RFC2544.
Name Documentation Status
tc01-64b-1t1c-ethip4-ip4base-copwhtlistbase-mrr [Cfg] DUT runs IPv4 routing and whitelist filters config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618893, rx 101120065
tc02-1518b-1t1c-ethip4-ip4base-copwhtlistbase-mrr [Cfg] DUT runs IPv4 routing and whitelist filters config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc03-9000b-1t1c-ethip4-ip4base-copwhtlistbase-mrr [Cfg] DUT runs IPv4 routing and whitelist filters config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771601, rx 2771601
tc04-imix-1t1c-ethip4-ip4base-copwhtlistbase-mrr [Cfg] DUT runs IPv4 routing and whitelist filters config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722
tc05-64b-2t2c-ethip4-ip4base-copwhtlistbase-mrr [Cfg] DUT runs IPv4 routing and whitelist filters config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618892, rx 185236221
tc06-1518b-2t2c-ethip4-ip4base-copwhtlistbase-mrr [Cfg] DUT runs IPv4 routing and whitelist filters config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254852, rx 16254852
tc07-9000b-2t2c-ethip4-ip4base-copwhtlistbase-mrr [Cfg] DUT runs IPv4 routing and whitelist filters config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc08-imix-2t2c-ethip4-ip4base-copwhtlistbase-mrr [Cfg] DUT runs IPv4 routing and whitelist filters config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722
tc09-64b-4t4c-ethip4-ip4base-copwhtlistbase-mrr [Cfg] DUT runs IPv4 routing and whitelist filters config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618911, rx 238053106
tc10-1518b-4t4c-ethip4-ip4base-copwhtlistbase-mrr [Cfg] DUT runs IPv4 routing and whitelist filters config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc11-9000b-4t4c-ethip4-ip4base-copwhtlistbase-mrr [Cfg] DUT runs IPv4 routing and whitelist filters config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc12-imix-4t4c-ethip4-ip4base-copwhtlistbase-mrr [Cfg] DUT runs IPv4 routing and whitelist filters config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722

7.2.3.2. 10ge2p1x520-ethip4-ip4base-iacldstbase-mrr

Raw results IPv4 iAcl whitelist test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4 for IPv4 routing.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing, two static IPv4 /24 routes and IPv4 iAcl security whitelist ingress /24 filter entries applied on links TG - DUT1 and DUT2 - TG. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel.
  • [Ver] TG verification: In MaxReceivedRate tests TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv6 header and generated payload. MAC addresses are matching MAC addresses of the TG node interfaces.
  • [Ref] Applicable standard specifications: RFC2544.
Name Documentation Status
tc01-64b-1t1c-ethip4-ip4base-iacldstbase-mrr [Cfg] DUT runs IPv4 routing and whitelist filters config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618893, rx 88747818
tc02-1518b-1t1c-ethip4-ip4base-iacldstbase-mrr [Cfg] DUT runs IPv4 routing and whitelist filters config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc03-9000b-1t1c-ethip4-ip4base-iacldstbase-mrr [Cfg] DUT runs IPv4 routing and whitelist filters config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771601, rx 2771601
tc04-imix-1t1c-ethip4-ip4base-iacldstbase-mrr [Cfg] DUT runs IPv4 routing and whitelist filters config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722
tc05-64b-2t2c-ethip4-ip4base-iacldstbase-mrr [Cfg] DUT runs IPv4 routing and whitelist filters config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618892, rx 153175648
tc06-1518b-2t2c-ethip4-ip4base-iacldstbase-mrr [Cfg] DUT runs IPv4 routing and whitelist filters config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254852, rx 16254852
tc07-9000b-2t2c-ethip4-ip4base-iacldstbase-mrr [Cfg] DUT runs IPv4 routing and whitelist filters config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc08-imix-2t2c-ethip4-ip4base-iacldstbase-mrr [Cfg] DUT runs IPv4 routing and whitelist filters config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722
tc09-64b-4t4c-ethip4-ip4base-iacldstbase-mrr [Cfg] DUT runs IPv4 routing and whitelist filters config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618911, rx 235864141
tc10-1518b-4t4c-ethip4-ip4base-iacldstbase-mrr [Cfg] DUT runs IPv4 routing and whitelist filters config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc11-9000b-4t4c-ethip4-ip4base-iacldstbase-mrr [Cfg] DUT runs IPv4 routing and whitelist filters config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc12-imix-4t4c-ethip4-ip4base-iacldstbase-mrr [Cfg] DUT runs IPv4 routing and whitelist filters config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722

7.2.3.3. 10ge2p1x520-ethip4-ip4base-ipolicemarkbase-mrr

Raw results IPv4 policer test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4 for IPv4 routing.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing and two static IPv4 /24 route entries and policer with 2R3C color-aware configuration. Policer is applied on links TG - DUT1 and DUT2 - TG. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel.
  • [Ver] TG verification: In MaxReceivedRate tests TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv6 header and generated payload. MAC addresses are matching MAC addresses of the TG node interfaces.
  • [Ref] Applicable standard specifications: RFC2544, RFC2698.
Name Documentation Status
tc01-64b-1t1c-ethip4-ip4base-ipolicemarkbase-mrr [Cfg] DUT runs IPv4 routing and policer config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618893, rx 86935324
tc02-1518b-1t1c-ethip4-ip4base-ipolicemarkbase-mrr [Cfg] DUT runs IPv4 routing and policer config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc03-9000b-1t1c-ethip4-ip4base-ipolicemarkbase-mrr [Cfg] DUT runs IPv4 routing and policer config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771601, rx 2771601
tc04-imix-1t1c-ethip4-ip4base-ipolicemarkbase-mrr [Cfg] DUT runs IPv4 routing and policer config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722
tc05-64b-2t2c-ethip4-ip4base-ipolicemarkbase-mrr [Cfg] DUT runs IPv4 routing and policer config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618892, rx 148413436
tc06-1518b-2t2c-ethip4-ip4base-ipolicemarkbase-mrr [Cfg] DUT runs IPv4 routing and policer config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254852, rx 16254852
tc07-9000b-2t2c-ethip4-ip4base-ipolicemarkbase-mrr [Cfg] DUT runs IPv4 routing and policer config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc08-imix-2t2c-ethip4-ip4base-ipolicemarkbase-mrr [Cfg] DUT runs IPv4 routing and policer config with 2 threada, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722
tc09-64b-4t4c-ethip4-ip4base-ipolicemarkbase-mrr [Cfg] DUT runs IPv4 routing and policer config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618911, rx 226600665
tc10-1518b-4t4c-ethip4-ip4base-ipolicemarkbase-mrr [Cfg] DUT runs IPv4 routing and policer config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc11-9000b-4t4c-ethip4-ip4base-ipolicemarkbase-mrr [Cfg] DUT runs IPv4 routing and policer config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc12-imix-4t4c-ethip4-ip4base-ipolicemarkbase-mrr [Cfg] DUT runs IPv4 routing and policer config with 4 threada, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722

7.2.3.4. 10ge2p1x520-ethip4-ip4base-mrr

Raw results IPv4 routing test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4 for IPv4 routing.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing and two static IPv4 /24 route entries. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel.
  • [Ver] TG verification: In MaxReceivedRate test TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
  • [Ref] Applicable standard specifications: RFC2544.
Name Documentation Status
tc01-64b-1t1c-ethip4-ip4base-mrr [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618893, rx 114844426
tc02-1518b-1t1c-ethip4-ip4base-mrr [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc03-9000b-1t1c-ethip4-ip4base-mrr [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771601, rx 2771601
tc04-imix-1t1c-ethip4-ip4base-mrr [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722
tc05-64b-2t2c-ethip4-ip4base-mrr [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618892, rx 233233153
tc06-1518b-2t2c-ethip4-ip4base-mrr [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254852, rx 16254852
tc07-9000b-2t2c-ethip4-ip4base-mrr [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc08-imix-2t2c-ethip4-ip4base-mrr [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722
tc09-64b-4t4c-ethip4-ip4base-mrr [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618911, rx 237665911
tc10-1518b-4t4c-ethip4-ip4base-mrr [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc11-9000b-4t4c-ethip4-ip4base-mrr [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc12-imix-4t4c-ethip4-ip4base-mrr [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, 2 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722

7.2.3.5. 10ge2p1x520-ethip4-ip4scale200k-mrr

Raw results IPv4 routing test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4 for IPv4 routing.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing and 2x100k static IPv4 /32 route entries. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel.
  • [Ver] TG verification: In MaxReceivedRate test TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
  • [Ref] Applicable standard specifications: RFC2544.
Name Documentation Status
tc01-64b-1t1c-ethip4-ip4scale200k-mrr [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618893, rx 107206695
tc02-1518b-1t1c-ethip4-ip4scale200k-mrr [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc03-9000b-1t1c-ethip4-ip4scale200k-mrr [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc04-imix-1t1c-ethip4-ip4scale200k-mrr [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722
tc05-64b-2t2c-ethip4-ip4scale200k-mrr [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618892, rx 221471867
tc06-1518b-2t2c-ethip4-ip4scale200k-mrr [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc07-9000b-2t2c-ethip4-ip4scale200k-mrr [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc08-imix-2t2c-ethip4-ip4scale200k-mrr [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722
tc09-64b-4t4c-ethip4-ip4scale200k-mrr [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618911, rx 237826521
tc10-1518b-4t4c-ethip4-ip4scale200k-mrr [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc11-9000b-4t4c-ethip4-ip4scale200k-mrr [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc12-imix-4t4c-ethip4-ip4scale200k-mrr [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, 2 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722

7.2.3.6. 10ge2p1x520-ethip4-ip4scale20k-mrr

Raw results IPv4 routing test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4 for IPv4 routing.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing and 2x100k static IPv4 /32 route entries. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel.
  • [Ver] TG verification: In MaxReceivedRate test TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
  • [Ref] Applicable standard specifications: RFC2544.
Name Documentation Status
tc01-64b-1t1c-ethip4-ip4scale20k-mrr [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618893, rx 107433831
tc02-1518b-1t1c-ethip4-ip4scale20k-mrr [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc03-9000b-1t1c-ethip4-ip4scale20k-mrr [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771601, rx 2771601
tc04-imix-1t1c-ethip4-ip4scale20k-mrr [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722
tc05-64b-2t2c-ethip4-ip4scale20k-mrr [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618892, rx 223080466
tc06-1518b-2t2c-ethip4-ip4scale20k-mrr [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254852, rx 16254852
tc07-9000b-2t2c-ethip4-ip4scale20k-mrr [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc08-imix-2t2c-ethip4-ip4scale20k-mrr [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722
tc09-64b-4t4c-ethip4-ip4scale20k-mrr [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618911, rx 237800256
tc10-1518b-4t4c-ethip4-ip4scale20k-mrr [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc11-9000b-4t4c-ethip4-ip4scale20k-mrr [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc12-imix-4t4c-ethip4-ip4scale20k-mrr [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, 2 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722

7.2.3.7. 10ge2p1x520-ethip4-ip4scale2m-mrr

Raw results IPv4 routing test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4 for IPv4 routing.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing and 2x100k static IPv4 /32 route entries. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel.
  • [Ver] TG verification: In MaxReceivedRate test TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
  • [Ref] Applicable standard specifications: RFC2544.
Name Documentation Status
tc01-64b-1t1c-ethip4-ip4scale2m-mrr [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618893, rx 84561572
tc02-1518b-1t1c-ethip4-ip4scale2m-mrr [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254852, rx 16254852
tc03-9000b-1t1c-ethip4-ip4scale2m-mrr [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc04-imix-1t1c-ethip4-ip4scale2m-mrr [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722
tc05-64b-2t2c-ethip4-ip4scale2m-mrr [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618911, rx 180656987
tc06-1518b-2t2c-ethip4-ip4scale2m-mrr [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc07-9000b-2t2c-ethip4-ip4scale2m-mrr [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc08-imix-2t2c-ethip4-ip4scale2m-mrr [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722
tc09-64b-4t4c-ethip4-ip4scale2m-mrr [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618910, rx 238191943
tc10-1518b-4t4c-ethip4-ip4scale2m-mrr [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254852, rx 16254852
tc11-9000b-4t4c-ethip4-ip4scale2m-mrr [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771599, rx 2771599
tc12-imix-4t4c-ethip4-ip4scale2m-mrr [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, 2 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722

7.2.3.8. 10ge2p1x520-ethip4udp-ip4base-iacl1sf-10kflows-mrr

Raw results IPv4 test cases with ACL

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.
  • [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
  • [Ver] TG verification: In MaxReceivedRate test TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
  • [Ref] Applicable standard specifications: RFC2544.
Name Documentation Status
tc01-64b-1t1c-ethip4udp-ip4base-iacl1-stateful-flows10k-mrr [Cfg] DUT runs IPv4 routing config with ACL with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618893, rx 56285694
tc02-1518b-1t1c-ethip4udp-ip4base-iacl1-stateful-flows10k-mrr [Cfg] DUT runs IPv4 routing config with ACL with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc03-9000b-1t1c-ethip4udp-ip4base-iacl1-stateful-flows10k-mrr [Cfg] DUT runs IPv4 routing config with ACL with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771601, rx 2771601
tc04-imix-1t1c-ethip4udp-ip4base-iacl1-stateful-flows10k-mrr [Cfg] DUT runs IPv4 routing config with ACL with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 54061317
tc05-64b-2t2c-ethip4udp-ip4base-iacl1-stateful-flows10k-mrr [Cfg] DUT runs IPv4 routing config with ACL with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618892, rx 95044263
tc06-1518b-2t2c-ethip4udp-ip4base-iacl1-stateful-flows10k-mrr [Cfg] DUT runs IPv4 routing config with ACL with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254852, rx 16254852
tc07-9000b-2t2c-ethip4udp-ip4base-iacl1-stateful-flows10k-mrr [Cfg] DUT runs IPv4 routing config with ACL with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc08-imix-2t2c-ethip4udp-ip4base-iacl1-stateful-flows10k-mrr [Cfg] DUT runs IPv4 routing config with ACL with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722
tc09-64b-4t4c-ethip4udp-ip4base-iacl1-stateful-flows10k-mrr [Cfg] DUT runs IPv4 routing config with ACL with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618911, rx 154769835
tc10-1518b-4t4c-ethip4udp-ip4base-iacl1-stateful-flows10k-mrr [Cfg] DUT runs IPv4 routing config with ACL with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc11-9000b-4t4c-ethip4udp-ip4base-iacl1-stateful-flows10k-mrr [Cfg] DUT runs IPv4 routing config with ACL with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc12-imix-4t4c-ethip4udp-ip4base-iacl1-stateful-flows10k-mrr [Cfg] DUT runs IPv4 routing config with ACL with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722

7.2.3.9. 10ge2p1x520-ethip4udp-ip4base-iacl1sl-10kflows-mrr

Raw results IPv4 test cases with ACL

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.
  • [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
  • [Ver] TG verification: In MaxReceivedRate test TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
  • [Ref] Applicable standard specifications: RFC2544.
Name Documentation Status
tc01-64b-1t1c-ethip4udp-ip4base-iacl1-stateless-flows10k-mrr [Cfg] DUT runs IPv4 routing config with ACL with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618893, rx 48050169
tc02-1518b-1t1c-ethip4udp-ip4base-iacl1-stateless-flows10k-mrr [Cfg] DUT runs IPv4 routing config with ACL with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc03-9000b-1t1c-ethip4udp-ip4base-iacl1-stateless-flows10k-mrr [Cfg] DUT runs IPv4 routing config with ACL with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771601, rx 2771601
tc04-imix-1t1c-ethip4udp-ip4base-iacl1-stateless-flows10k-mrr [Cfg] DUT runs IPv4 routing config with ACL with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 48259147
tc05-64b-2t2c-ethip4udp-ip4base-iacl1-stateless-flows10k-mrr [Cfg] DUT runs IPv4 routing config with ACL with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618892, rx 79340177
tc06-1518b-2t2c-ethip4udp-ip4base-iacl1-stateless-flows10k-mrr [Cfg] DUT runs IPv4 routing config with ACL with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254852, rx 16254852
tc07-9000b-2t2c-ethip4udp-ip4base-iacl1-stateless-flows10k-mrr [Cfg] DUT runs IPv4 routing config with ACL with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc08-imix-2t2c-ethip4udp-ip4base-iacl1-stateless-flows10k-mrr [Cfg] DUT runs IPv4 routing config with ACL with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722
tc09-64b-4t4c-ethip4udp-ip4base-iacl1-stateless-flows10k-mrr [Cfg] DUT runs IPv4 routing config with ACL with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618911, rx 122413072
tc10-1518b-4t4c-ethip4udp-ip4base-iacl1-stateless-flows10k-mrr [Cfg] DUT runs IPv4 routing config with ACL with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc11-9000b-4t4c-ethip4udp-ip4base-iacl1-stateless-flows10k-mrr [Cfg] DUT runs IPv4 routing config with ACL with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc12-imix-4t4c-ethip4udp-ip4base-iacl1-stateless-flows10k-mrr [Cfg] DUT runs IPv4 routing config with ACL with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722

7.2.3.10. 10ge2p1x520-ethip4udp-ip4base-iacl50sf-10kflows-mrr

Raw results IPv4 test cases with ACL

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.
  • [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
  • [Ver] TG verification: In MaxReceivedRate test TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
  • [Ref] Applicable standard specifications: RFC2544.
Name Documentation Status
tc01-64b-1t1c-ethip4udp-ip4base-iacl50-stateful-flows10k-mrr [Cfg] DUT runs IPv4 routing config with ACL with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618893, rx 55934215
tc02-1518b-1t1c-ethip4udp-ip4base-iacl50-stateful-flows10k-mrr [Cfg] DUT runs IPv4 routing config with ACL with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc03-9000b-1t1c-ethip4udp-ip4base-iacl50-stateful-flows10k-mrr [Cfg] DUT runs IPv4 routing config with ACL with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc04-imix-1t1c-ethip4udp-ip4base-iacl50-stateful-flows10k-mrr [Cfg] DUT runs IPv4 routing config with ACL with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 53949904
tc05-64b-2t2c-ethip4udp-ip4base-iacl50-stateful-flows10k-mrr [Cfg] DUT runs IPv4 routing config with ACL with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618892, rx 86913293
tc06-1518b-2t2c-ethip4udp-ip4base-iacl50-stateful-flows10k-mrr [Cfg] DUT runs IPv4 routing config with ACL with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc07-9000b-2t2c-ethip4udp-ip4base-iacl50-stateful-flows10k-mrr [Cfg] DUT runs IPv4 routing config with ACL with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc08-imix-2t2c-ethip4udp-ip4base-iacl50-stateful-flows10k-mrr [Cfg] DUT runs IPv4 routing config with ACL with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722
tc09-64b-4t4c-ethip4udp-ip4base-iacl50-stateful-flows10k-mrr [Cfg] DUT runs IPv4 routing config with ACL with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618911, rx 131204368
tc10-1518b-4t4c-ethip4udp-ip4base-iacl50-stateful-flows10k-mrr [Cfg] DUT runs IPv4 routing config with ACL with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc11-9000b-4t4c-ethip4udp-ip4base-iacl50-stateful-flows10k-mrr [Cfg] DUT runs IPv4 routing config with ACL with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc12-imix-4t4c-ethip4udp-ip4base-iacl50-stateful-flows10k-mrr [Cfg] DUT runs IPv4 routing config with ACL with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722

7.2.3.11. 10ge2p1x520-ethip4udp-ip4base-iacl50sl-10kflows-mrr

Raw results IPv4 test cases with ACL

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.
  • [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
  • [Ver] TG verification: In MaxReceivedRate test TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
  • [Ref] Applicable standard specifications: RFC2544.
Name Documentation Status
tc01-64b-1t1c-ethip4udp-ip4base-iacl50-stateless-flows10k-mrr [Cfg] DUT runs IPv4 routing config with ACL with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618893, rx 48177042
tc02-1518b-1t1c-ethip4udp-ip4base-iacl50-stateless-flows10k-mrr [Cfg] DUT runs IPv4 routing config with ACL with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc03-9000b-1t1c-ethip4udp-ip4base-iacl50-stateless-flows10k-mrr [Cfg] DUT runs IPv4 routing config with ACL with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc04-imix-1t1c-ethip4udp-ip4base-iacl50-stateless-flows10k-mrr [Cfg] DUT runs IPv4 routing config with ACL with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 48040737
tc05-64b-2t2c-ethip4udp-ip4base-iacl50-stateless-flows10k-mrr [Cfg] DUT runs IPv4 routing config with ACL with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618892, rx 79239040
tc06-1518b-2t2c-ethip4udp-ip4base-iacl50-stateless-flows10k-mrr [Cfg] DUT runs IPv4 routing config with ACL with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc07-9000b-2t2c-ethip4udp-ip4base-iacl50-stateless-flows10k-mrr [Cfg] DUT runs IPv4 routing config with ACL with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc08-imix-2t2c-ethip4udp-ip4base-iacl50-stateless-flows10k-mrr [Cfg] DUT runs IPv4 routing config with ACL with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722
tc09-64b-4t4c-ethip4udp-ip4base-iacl50-stateless-flows10k-mrr [Cfg] DUT runs IPv4 routing config with ACL with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618911, rx 122135284
tc10-1518b-4t4c-ethip4udp-ip4base-iacl50-stateless-flows10k-mrr [Cfg] DUT runs IPv4 routing config with ACL with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc11-9000b-4t4c-ethip4udp-ip4base-iacl50-stateless-flows10k-mrr [Cfg] DUT runs IPv4 routing config with ACL with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc12-imix-4t4c-ethip4udp-ip4base-iacl50-stateless-flows10k-mrr [Cfg] DUT runs IPv4 routing config with ACL with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722

7.2.3.12. 10ge2p1x520-ethip4udp-ip4base-nat44-mrr

NAT44 performance test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4-UDP for IPv4 routing.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing and two static IPv4 /24 and IPv4/20 route entries. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel.
  • [Ver] TG verification: In MaxReceivedRate test TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
  • [Ref] Applicable standard specifications: RFC2544.
Name Documentation Status
tc01-64b-1t1c-ethip4-ip4base-snat-1u-1p-mrr [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port. NAT44 is configured between DUTs - 1 user and 1 port (session) per user.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618893, rx 82090273
tc02-1518b-1t1c-ethip4-ip4base-snat-1u-1p-mrr [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port. NAT44 is configured between DUTs - 1 user and 1 port (session) per user.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc03-9000b-1t1c-ethip4-ip4base-snat-1u-1p-mrr [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port. NAT44 is configured between DUTs - 1 user and 1 port (session) per user.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc04-imix-1t1c-ethip4-ip4base-snat-1u-1p-mrr [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port. NAT44 is configured between DUTs - 1 user and 1 port (session) per user.
[Ver] Find NDR for IMIX frames using binary search start at 10GE linerate, step 50kpps.
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722
tc05-64b-2t2c-ethip4-ip4base-snat-1u-1p-mrr [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port. NAT44 is configured between DUTs - 1 user and 1 port (session) per user.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618892, rx 165948343
tc06-1518b-2t2c-ethip4-ip4base-snat-1u-1p-mrr [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port. NAT44 is configured between DUTs - 1 user and 1 port (session) per user.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc07-9000b-2t2c-ethip4-ip4base-snat-1u-1p-mrr [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port. NAT44 is configured between DUTs - 1 user and 1 port (session) per user.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc08-imix-2t2c-ethip4-ip4base-snat-1u-1p-mrr [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port. NAT44 is configured between DUTs - 1 user and 1 port (session) per user.
[Ver] Find NDR for IMIX frames using binary search start at 10GE linerate, step 50kpps.
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874631
tc09-64b-4t4c-ethip4-ip4base-snat-1u-1p-mrr [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, 2 receive queues per NIC port. NAT44 is configured between DUTs - 1 user and 1 port (session) per user.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618911, rx 154176330
tc10-1518b-4t4c-ethip4-ip4base-snat-1u-1p-mrr [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, 2 receive queues per NIC port. NAT44 is configured between DUTs - 1 user and 1 port (session) per user.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc11-9000b-4t4c-ethip4-ip4base-snat-1u-1p-mrr [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, 2 receive queues per NIC port. NAT44 is configured between DUTs - 1 user and 1 port (session) per user.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc12-imix-4t4c-ethip4-ip4base-snat-1u-1p-mrr [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, 2 receive queues per NIC port. NAT44 is configured between DUTs - 1 user and 1 port (session) per user.
[Ver] Find NDR for IMIX frames using binary search start at 10GE linerate, step 50kpps.
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722

7.2.3.13. 10ge2p1x520-ethip4udp-ip4scale1000-udpsrcscale15-nat44-mrr

Raw results NAT44 performance test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4-UDP for IPv4 routing.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing and two static IPv4 /24 and IPv4/20 route entries. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel.
  • [Ver] TG verification: In MaxReceivedRate test TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
  • [Ref] Applicable standard specifications: RFC2544.
Name Documentation Status
tc01-64b-1t1c-ethip4udp-ip4scale1000-udpsrcscale15-snat-mrr [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port. NAT44 is configured between DUTs - 1000 users and 15 ports (sessions) per user.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618893, rx 67837525
tc02-1518b-1t1c-ethip4udp-ip4scale1000-udpsrcscale15-snat-mrr [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port. NAT44 is configured between DUTs - 1000 users and 15 ports (sessions) per user.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc03-9000b-1t1c-ethip4udp-ip4scale1000-udpsrcscale15-snat-mrr [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port. NAT44 is configured between DUTs - 1000 users and 15 ports (sessions) per user.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc04-imix-1t1c-ethip4udp-ip4scale1000-udpsrcscale15-snat-mrr [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port. NAT44 is configured between DUTs - 1000 users and 15 ports (sessions) per user.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 64571314
tc05-64b-2t2c-ethip4udp-ip4scale1000-udpsrcscale15-snat-mrr [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port. NAT44 is configured between DUTs - 1000 users and 15 ports (sessions) per user.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618892, rx 134595224
tc06-1518b-2t2c-ethip4udp-ip4scale1000-udpsrcscale15-snat-mrr [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port. NAT44 is configured between DUTs - 1000 users and 15 ports (sessions) per user.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc07-9000b-2t2c-ethip4udp-ip4scale1000-udpsrcscale15-snat-mrr [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port. NAT44 is configured between DUTs - 1000 users and 15 ports (sessions) per user.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc08-imix-2t2c-ethip4udp-ip4scale1000-udpsrcscale15-snat-mrr [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port. NAT44 is configured between DUTs - 1000 users and 15 ports (sessions) per user.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874625
tc09-64b-4t4c-ethip4udp-ip4scale1000-udpsrcscale15-snat-mrr [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, 2 receive queues per NIC port. NAT44 is configured between DUTs - 1000 users and 15 ports (sessions) per user.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618911, rx 235211198
tc10-1518b-4t4c-ethip4udp-ip4scale1000-udpsrcscale15-snat-mrr [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, 2 receive queues per NIC port. NAT44 is configured between DUTs - 1000 users and 15 ports (sessions) per user.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc11-9000b-4t4c-ethip4udp-ip4scale1000-udpsrcscale15-snat-mrr [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, 2 receive queues per NIC port. NAT44 is configured between DUTs - 1000 users and 15 ports (sessions) per user.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc12-imix-4t4c-ethip4udp-ip4scale1000-udpsrcscale15-snat-mrr [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, 2 receive queues per NIC port. NAT44 is configured between DUTs - 1000 users and 15 ports (sessions) per user.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722

7.2.3.14. 10ge2p1x710-ethip4-ip4base-copwhtlistbase-mrr

Raw results IPv4 whitelist test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4 for IPv4 routing.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing, two static IPv4 /24 routes and IPv4 COP security whitelist ingress /24 filter entries applied on links TG - DUT1 and DUT2 - TG. DUT1 and DUT2 tested with 2p10GE NIC X710 by Intel.
  • [Ver] TG verification: In MaxReceivedRate test TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
  • [Ref] Applicable standard specifications: RFC2544.
Name Documentation Status
tc01-64b-1t1c-ethip4-ip4base-copwhtlistbase-mrr [Cfg] DUT runs IPv4 routing and whitelist filters config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618893, rx 99466958
tc02-1518b-1t1c-ethip4-ip4base-copwhtlistbase-mrr [Cfg] DUT runs IPv4 routing and whitelist filters config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc03-9000b-1t1c-ethip4-ip4base-copwhtlistbase-mrr [Cfg] DUT runs IPv4 routing and whitelist filters config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771601, rx 2771601
tc04-imix-1t1c-ethip4-ip4base-copwhtlistbase-mrr [Cfg] DUT runs IPv4 routing and whitelist filters config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722
tc05-64b-2t2c-ethip4-ip4base-copwhtlistbase-mrr [Cfg] DUT runs IPv4 routing and whitelist filters config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618892, rx 184677094
tc06-1518b-2t2c-ethip4-ip4base-copwhtlistbase-mrr [Cfg] DUT runs IPv4 routing and whitelist filters config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254852, rx 16254852
tc07-9000b-2t2c-ethip4-ip4base-copwhtlistbase-mrr [Cfg] DUT runs IPv4 routing and whitelist filters config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc08-imix-2t2c-ethip4-ip4base-copwhtlistbase-mrr [Cfg] DUT runs IPv4 routing and whitelist filters config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722
tc09-64b-4t4c-ethip4-ip4base-copwhtlistbase-mrr [Cfg] DUT runs IPv4 routing and whitelist filters config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618911, rx 297617554
tc10-1518b-4t4c-ethip4-ip4base-copwhtlistbase-mrr [Cfg] DUT runs IPv4 routing and whitelist filters config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc11-9000b-4t4c-ethip4-ip4base-copwhtlistbase-mrr [Cfg] DUT runs IPv4 routing and whitelist filters config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc12-imix-4t4c-ethip4-ip4base-copwhtlistbase-mrr [Cfg] DUT runs IPv4 routing and whitelist filters config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722

7.2.3.15. 10ge2p1x710-ethip4-ip4base-iacldstbase-mrr

Raw results IPv4 iAcl whitelist test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4 for IPv4 routing.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing, two static IPv4 /24 routes and IPv4 iAcl security whitelist ingress /24 filter entries applied on links TG - DUT1 and DUT2 - TG. DUT1 and DUT2 tested with 2p10GE NIC X710 by Intel.
  • [Ver] TG verification: In MaxReceivedRate tests TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv6 header and generated payload. MAC addresses are matching MAC addresses of the TG node interfaces.
  • [Ref] Applicable standard specifications: RFC2544.
Name Documentation Status
tc01-64b-1t1c-ethip4-ip4base-iacldstbase-mrr [Cfg] DUT runs IPv4 routing and whitelist filters config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618893, rx 88114895
tc02-1518b-1t1c-ethip4-ip4base-iacldstbase-mrr [Cfg] DUT runs IPv4 routing and whitelist filters config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc03-9000b-1t1c-ethip4-ip4base-iacldstbase-mrr [Cfg] DUT runs IPv4 routing and whitelist filters config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771601, rx 2771601
tc04-imix-1t1c-ethip4-ip4base-iacldstbase-mrr [Cfg] DUT runs IPv4 routing and whitelist filters config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722
tc05-64b-2t2c-ethip4-ip4base-iacldstbase-mrr [Cfg] DUT runs IPv4 routing and whitelist filters config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618892, rx 152646919
tc06-1518b-2t2c-ethip4-ip4base-iacldstbase-mrr [Cfg] DUT runs IPv4 routing and whitelist filters config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254852, rx 16254852
tc07-9000b-2t2c-ethip4-ip4base-iacldstbase-mrr [Cfg] DUT runs IPv4 routing and whitelist filters config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc08-imix-2t2c-ethip4-ip4base-iacldstbase-mrr [Cfg] DUT runs IPv4 routing and whitelist filters config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722
tc09-64b-4t4c-ethip4-ip4base-iacldstbase-mrr [Cfg] DUT runs IPv4 routing and whitelist filters config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618911, rx 272240307
tc10-1518b-4t4c-ethip4-ip4base-iacldstbase-mrr [Cfg] DUT runs IPv4 routing and whitelist filters config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc11-9000b-4t4c-ethip4-ip4base-iacldstbase-mrr [Cfg] DUT runs IPv4 routing and whitelist filters config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc12-imix-4t4c-ethip4-ip4base-iacldstbase-mrr [Cfg] DUT runs IPv4 routing and whitelist filters config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722

7.2.3.16. 10ge2p1x710-ethip4-ip4base-ipolicemarkbase-mrr

Raw results IPv4 policer test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4 for IPv4 routing.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing and two static IPv4 /24 route entries and policer with 2R3C color-aware configuration. Policer is applied on links TG - DUT1 and DUT2 - TG. DUT1 and DUT2 tested with 2p10GE NIC X710 by Intel.
  • [Ver] TG verification: In MaxReceivedRate tests TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv6 header and generated payload. MAC addresses are matching MAC addresses of the TG node interfaces.
  • [Ref] Applicable standard specifications: RFC2544, RFC2698.
Name Documentation Status
tc01-64b-1t1c-ethip4-ip4base-ipolicemarkbase-mrr [Cfg] DUT runs IPv4 routing and policer config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618893, rx 86140127
tc02-1518b-1t1c-ethip4-ip4base-ipolicemarkbase-mrr [Cfg] DUT runs IPv4 routing and policer config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc03-9000b-1t1c-ethip4-ip4base-ipolicemarkbase-mrr [Cfg] DUT runs IPv4 routing and policer config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771601, rx 2771601
tc04-imix-1t1c-ethip4-ip4base-ipolicemarkbase-mrr [Cfg] DUT runs IPv4 routing and policer config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722
tc05-64b-2t2c-ethip4-ip4base-ipolicemarkbase-mrr [Cfg] DUT runs IPv4 routing and policer config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618892, rx 144098218
tc06-1518b-2t2c-ethip4-ip4base-ipolicemarkbase-mrr [Cfg] DUT runs IPv4 routing and policer config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254852, rx 16254852
tc07-9000b-2t2c-ethip4-ip4base-ipolicemarkbase-mrr [Cfg] DUT runs IPv4 routing and policer config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc08-imix-2t2c-ethip4-ip4base-ipolicemarkbase-mrr [Cfg] DUT runs IPv4 routing and policer config with 2 threada, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722
tc09-64b-4t4c-ethip4-ip4base-ipolicemarkbase-mrr [Cfg] DUT runs IPv4 routing and policer config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618911, rx 260479798
tc10-1518b-4t4c-ethip4-ip4base-ipolicemarkbase-mrr [Cfg] DUT runs IPv4 routing and policer config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc11-9000b-4t4c-ethip4-ip4base-ipolicemarkbase-mrr [Cfg] DUT runs IPv4 routing and policer config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc12-imix-4t4c-ethip4-ip4base-ipolicemarkbase-mrr [Cfg] DUT runs IPv4 routing and policer config with 4 threada, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722

7.2.3.17. 10ge2p1x710-ethip4-ip4base-mrr

Raw results IPv4 routing test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4 for IPv4 routing.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing and two static IPv4 /24 route entries. DUT1 and DUT2 tested with 2p10GE NIC X710 by Intel.
  • [Ver] TG verification: In MaxReceivedRate test TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
  • [Ref] Applicable standard specifications: RFC2544.
Name Documentation Status
tc01-64b-1t1c-ethip4-ip4base-mrr [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618893, rx 112753060
tc02-1518b-1t1c-ethip4-ip4base-mrr [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc03-9000b-1t1c-ethip4-ip4base-mrr [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771601, rx 2771601
tc04-imix-1t1c-ethip4-ip4base-mrr [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722
tc05-64b-2t2c-ethip4-ip4base-mrr [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618892, rx 236797052
tc06-1518b-2t2c-ethip4-ip4base-mrr [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254852, rx 16254852
tc07-9000b-2t2c-ethip4-ip4base-mrr [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc08-imix-2t2c-ethip4-ip4base-mrr [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722
tc09-64b-4t4c-ethip4-ip4base-mrr [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618911, rx 297618153
tc10-1518b-4t4c-ethip4-ip4base-mrr [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc11-9000b-4t4c-ethip4-ip4base-mrr [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc12-imix-4t4c-ethip4-ip4base-mrr [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, 2 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722

7.2.3.18. 10ge2p1x710-ethip4-ip4scale200k-mrr

Raw results IPv4 routing test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4 for IPv4 routing.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing and 2x100k static IPv4 /32 route entries. DUT1 and DUT2 tested with 2p10GE NIC X710 by Intel.
  • [Ver] TG verification: In MaxReceivedRate test TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
  • [Ref] Applicable standard specifications: RFC2544.
Name Documentation Status
tc01-64b-1t1c-ethip4-ip4scale200k-mrr [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618893, rx 105450269
tc02-1518b-1t1c-ethip4-ip4scale200k-mrr [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc03-9000b-1t1c-ethip4-ip4scale200k-mrr [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc04-imix-1t1c-ethip4-ip4scale200k-mrr [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722
tc05-64b-2t2c-ethip4-ip4scale200k-mrr [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618892, rx 224545465
tc06-1518b-2t2c-ethip4-ip4scale200k-mrr [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc07-9000b-2t2c-ethip4-ip4scale200k-mrr [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc08-imix-2t2c-ethip4-ip4scale200k-mrr [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722
tc09-64b-4t4c-ethip4-ip4scale200k-mrr [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618911, rx 297617722
tc10-1518b-4t4c-ethip4-ip4scale200k-mrr [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc11-9000b-4t4c-ethip4-ip4scale200k-mrr [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc12-imix-4t4c-ethip4-ip4scale200k-mrr [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, 2 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722

7.2.3.19. 10ge2p1x710-ethip4-ip4scale20k-mrr

Raw results IPv4 routing test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4 for IPv4 routing.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing and 2x100k static IPv4 /32 route entries. DUT1 and DUT2 tested with 2p10GE NIC X710 by Intel.
  • [Ver] TG verification: In MaxReceivedRate test TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
  • [Ref] Applicable standard specifications: RFC2544.
Name Documentation Status
tc01-64b-1t1c-ethip4-ip4scale20k-mrr [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618893, rx 106018117
tc02-1518b-1t1c-ethip4-ip4scale20k-mrr [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc03-9000b-1t1c-ethip4-ip4scale20k-mrr [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771601, rx 2771601
tc04-imix-1t1c-ethip4-ip4scale20k-mrr [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722
tc05-64b-2t2c-ethip4-ip4scale20k-mrr [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618892, rx 224421248
tc06-1518b-2t2c-ethip4-ip4scale20k-mrr [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254852, rx 16254852
tc07-9000b-2t2c-ethip4-ip4scale20k-mrr [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc08-imix-2t2c-ethip4-ip4scale20k-mrr [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722
tc09-64b-4t4c-ethip4-ip4scale20k-mrr [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618911, rx 297617953
tc10-1518b-4t4c-ethip4-ip4scale20k-mrr [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc11-9000b-4t4c-ethip4-ip4scale20k-mrr [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc12-imix-4t4c-ethip4-ip4scale20k-mrr [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, 2 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722

7.2.3.20. 10ge2p1x710-ethip4-ip4scale2m-mrr

Raw results IPv4 routing test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4 for IPv4 routing.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing and 2x100k static IPv4 /32 route entries. DUT1 and DUT2 tested with 2p10GE NIC X710 by Intel.
  • [Ver] TG verification: In MaxReceivedRate test TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
  • [Ref] Applicable standard specifications: RFC2544.
Name Documentation Status
tc01-64b-1t1c-ethip4-ip4scale2m-mrr [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618892, rx 84525058
tc02-1518b-1t1c-ethip4-ip4scale2m-mrr [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254852, rx 16254852
tc03-9000b-1t1c-ethip4-ip4scale2m-mrr [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc04-imix-1t1c-ethip4-ip4scale2m-mrr [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722
tc05-64b-2t2c-ethip4-ip4scale2m-mrr [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618911, rx 178548127
tc06-1518b-2t2c-ethip4-ip4scale2m-mrr [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc07-9000b-2t2c-ethip4-ip4scale2m-mrr [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc08-imix-2t2c-ethip4-ip4scale2m-mrr [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722
tc09-64b-4t4c-ethip4-ip4scale2m-mrr [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618910, rx 297617839
tc10-1518b-4t4c-ethip4-ip4scale2m-mrr [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254852, rx 16254852
tc11-9000b-4t4c-ethip4-ip4scale2m-mrr [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771599, rx 2771599
tc12-imix-4t4c-ethip4-ip4scale2m-mrr [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, 2 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722

7.2.3.21. 10ge2p1x710-ethip4udp-ip4base-iacl1sf-10kflows-mrr

Raw results IPv4 test cases with ACL

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.
  • [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with 2p10GE NIC X710 by Intel.
  • [Ver] TG verification: In MaxReceivedRate test TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
  • [Ref] Applicable standard specifications: RFC2544.
Name Documentation Status
tc01-64b-1t1c-ethip4udp-ip4base-iacl1-stateful-flows10k-mrr [Cfg] DUT runs IPv4 routing config with ACL with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618893, rx 55606751
tc02-1518b-1t1c-ethip4udp-ip4base-iacl1-stateful-flows10k-mrr [Cfg] DUT runs IPv4 routing config with ACL with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc03-9000b-1t1c-ethip4udp-ip4base-iacl1-stateful-flows10k-mrr [Cfg] DUT runs IPv4 routing config with ACL with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771601, rx 2771601
tc04-imix-1t1c-ethip4udp-ip4base-iacl1-stateful-flows10k-mrr [Cfg] DUT runs IPv4 routing config with ACL with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 53485789
tc05-64b-2t2c-ethip4udp-ip4base-iacl1-stateful-flows10k-mrr [Cfg] DUT runs IPv4 routing config with ACL with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618892, rx 108504696
tc06-1518b-2t2c-ethip4udp-ip4base-iacl1-stateful-flows10k-mrr [Cfg] DUT runs IPv4 routing config with ACL with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254852, rx 16254852
tc07-9000b-2t2c-ethip4udp-ip4base-iacl1-stateful-flows10k-mrr [Cfg] DUT runs IPv4 routing config with ACL with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc08-imix-2t2c-ethip4udp-ip4base-iacl1-stateful-flows10k-mrr [Cfg] DUT runs IPv4 routing config with ACL with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722
tc09-64b-4t4c-ethip4udp-ip4base-iacl1-stateful-flows10k-mrr [Cfg] DUT runs IPv4 routing config with ACL with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618911, rx 129837767
tc10-1518b-4t4c-ethip4udp-ip4base-iacl1-stateful-flows10k-mrr [Cfg] DUT runs IPv4 routing config with ACL with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc11-9000b-4t4c-ethip4udp-ip4base-iacl1-stateful-flows10k-mrr [Cfg] DUT runs IPv4 routing config with ACL with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc12-imix-4t4c-ethip4udp-ip4base-iacl1-stateful-flows10k-mrr [Cfg] DUT runs IPv4 routing config with ACL with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722

7.2.3.22. 10ge2p1x710-ethip4udp-ip4base-iacl1sl-10kflows-mrr

Raw results IPv4 test cases with ACL

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.
  • [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with 2p10GE NIC X710 by Intel.
  • [Ver] TG verification: In MaxReceivedRate test TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
  • [Ref] Applicable standard specifications: RFC2544.
Name Documentation Status
tc01-64b-1t1c-ethip4udp-ip4base-iacl1-stateless-flows10k-mrr [Cfg] DUT runs IPv4 routing config with ACL with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618893, rx 47567898
tc02-1518b-1t1c-ethip4udp-ip4base-iacl1-stateless-flows10k-mrr [Cfg] DUT runs IPv4 routing config with ACL with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc03-9000b-1t1c-ethip4udp-ip4base-iacl1-stateless-flows10k-mrr [Cfg] DUT runs IPv4 routing config with ACL with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771601, rx 2771601
tc04-imix-1t1c-ethip4udp-ip4base-iacl1-stateless-flows10k-mrr [Cfg] DUT runs IPv4 routing config with ACL with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 48165263
tc05-64b-2t2c-ethip4udp-ip4base-iacl1-stateless-flows10k-mrr [Cfg] DUT runs IPv4 routing config with ACL with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618892, rx 81519791
tc06-1518b-2t2c-ethip4udp-ip4base-iacl1-stateless-flows10k-mrr [Cfg] DUT runs IPv4 routing config with ACL with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254852, rx 16254852
tc07-9000b-2t2c-ethip4udp-ip4base-iacl1-stateless-flows10k-mrr [Cfg] DUT runs IPv4 routing config with ACL with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc08-imix-2t2c-ethip4udp-ip4base-iacl1-stateless-flows10k-mrr [Cfg] DUT runs IPv4 routing config with ACL with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722
tc09-64b-4t4c-ethip4udp-ip4base-iacl1-stateless-flows10k-mrr [Cfg] DUT runs IPv4 routing config with ACL with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618911, rx 118720884
tc10-1518b-4t4c-ethip4udp-ip4base-iacl1-stateless-flows10k-mrr [Cfg] DUT runs IPv4 routing config with ACL with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc11-9000b-4t4c-ethip4udp-ip4base-iacl1-stateless-flows10k-mrr [Cfg] DUT runs IPv4 routing config with ACL with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc12-imix-4t4c-ethip4udp-ip4base-iacl1-stateless-flows10k-mrr [Cfg] DUT runs IPv4 routing config with ACL with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722

7.2.3.23. 10ge2p1x710-ethip4udp-ip4base-iacl50sf-10kflows-mrr

Raw results IPv4 test cases with ACL

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.
  • [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with 2p10GE NIC X710 by Intel.
  • [Ver] TG verification: In MaxReceivedRate test TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
  • [Ref] Applicable standard specifications: RFC2544.
Name Documentation Status
tc01-64b-1t1c-ethip4udp-ip4base-iacl50-stateful-flows10k-mrr [Cfg] DUT runs IPv4 routing config with ACL with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618893, rx 55409731
tc02-1518b-1t1c-ethip4udp-ip4base-iacl50-stateful-flows10k-mrr [Cfg] DUT runs IPv4 routing config with ACL with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc03-9000b-1t1c-ethip4udp-ip4base-iacl50-stateful-flows10k-mrr [Cfg] DUT runs IPv4 routing config with ACL with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771601, rx 2771601
tc04-imix-1t1c-ethip4udp-ip4base-iacl50-stateful-flows10k-mrr [Cfg] DUT runs IPv4 routing config with ACL with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 53501856
tc05-64b-2t2c-ethip4udp-ip4base-iacl50-stateful-flows10k-mrr [Cfg] DUT runs IPv4 routing config with ACL with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618892, rx 101072965
tc06-1518b-2t2c-ethip4udp-ip4base-iacl50-stateful-flows10k-mrr [Cfg] DUT runs IPv4 routing config with ACL with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254852, rx 16254852
tc07-9000b-2t2c-ethip4udp-ip4base-iacl50-stateful-flows10k-mrr [Cfg] DUT runs IPv4 routing config with ACL with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc08-imix-2t2c-ethip4udp-ip4base-iacl50-stateful-flows10k-mrr [Cfg] DUT runs IPv4 routing config with ACL with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722
tc09-64b-4t4c-ethip4udp-ip4base-iacl50-stateful-flows10k-mrr [Cfg] DUT runs IPv4 routing config with ACL with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618911, rx 154326455
tc10-1518b-4t4c-ethip4udp-ip4base-iacl50-stateful-flows10k-mrr [Cfg] DUT runs IPv4 routing config with ACL with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc11-9000b-4t4c-ethip4udp-ip4base-iacl50-stateful-flows10k-mrr [Cfg] DUT runs IPv4 routing config with ACL with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc12-imix-4t4c-ethip4udp-ip4base-iacl50-stateful-flows10k-mrr [Cfg] DUT runs IPv4 routing config with ACL with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722

7.2.3.24. 10ge2p1x710-ethip4udp-ip4base-iacl50sl-10kflows-mrr

Raw results IPv4 test cases with ACL

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.
  • [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with 2p10GE NIC X710 by Intel.
  • [Ver] TG verification: In MaxReceivedRate test TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
  • [Ref] Applicable standard specifications: RFC2544.
Name Documentation Status
tc01-64b-1t1c-ethip4udp-ip4base-iacl50-stateless-flows10k-mrr [Cfg] DUT runs IPv4 routing config with ACL with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618893, rx 47592774
tc02-1518b-1t1c-ethip4udp-ip4base-iacl50-stateless-flows10k-mrr [Cfg] DUT runs IPv4 routing config with ACL with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc03-9000b-1t1c-ethip4udp-ip4base-iacl50-stateless-flows10k-mrr [Cfg] DUT runs IPv4 routing config with ACL with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771601, rx 2771601
tc04-imix-1t1c-ethip4udp-ip4base-iacl50-stateless-flows10k-mrr [Cfg] DUT runs IPv4 routing config with ACL with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 48105579
tc05-64b-2t2c-ethip4udp-ip4base-iacl50-stateless-flows10k-mrr [Cfg] DUT runs IPv4 routing config with ACL with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618892, rx 79352109
tc06-1518b-2t2c-ethip4udp-ip4base-iacl50-stateless-flows10k-mrr [Cfg] DUT runs IPv4 routing config with ACL with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254852, rx 16254852
tc07-9000b-2t2c-ethip4udp-ip4base-iacl50-stateless-flows10k-mrr [Cfg] DUT runs IPv4 routing config with ACL with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc08-imix-2t2c-ethip4udp-ip4base-iacl50-stateless-flows10k-mrr [Cfg] DUT runs IPv4 routing config with ACL with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722
tc09-64b-4t4c-ethip4udp-ip4base-iacl50-stateless-flows10k-mrr [Cfg] DUT runs IPv4 routing config with ACL with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618911, rx 117092731
tc10-1518b-4t4c-ethip4udp-ip4base-iacl50-stateless-flows10k-mrr [Cfg] DUT runs IPv4 routing config with ACL with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc11-9000b-4t4c-ethip4udp-ip4base-iacl50-stateless-flows10k-mrr [Cfg] DUT runs IPv4 routing config with ACL with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc12-imix-4t4c-ethip4udp-ip4base-iacl50-stateless-flows10k-mrr [Cfg] DUT runs IPv4 routing config with ACL with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722

7.2.3.25. 10ge2p1x710-ethip4udp-ip4base-nat44-mrr

NAT44 performance test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4-UDP for IPv4 routing.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing and two static IPv4 /24 and IPv4/20 route entries. DUT1 and DUT2 tested with 2p10GE NIC X710 by Intel.
  • [Ver] TG verification: In MaxReceivedRate test TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
  • [Ref] Applicable standard specifications: RFC2544.
Name Documentation Status
tc01-64b-1t1c-ethip4-ip4base-snat-1u-1p-mrr [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port. NAT44 is configured between DUTs - 1 user and 1 port (session) per user.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618893, rx 129209409
tc02-1518b-1t1c-ethip4-ip4base-snat-1u-1p-mrr [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port. NAT44 is configured between DUTs - 1 user and 1 port (session) per user.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc03-9000b-1t1c-ethip4-ip4base-snat-1u-1p-mrr [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port. NAT44 is configured between DUTs - 1 user and 1 port (session) per user.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771601, rx 2771601
tc04-imix-1t1c-ethip4-ip4base-snat-1u-1p-mrr [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port. NAT44 is configured between DUTs - 1 user and 1 port (session) per user.
[Ver] Find NDR for IMIX frames using binary search start at 10GE linerate, step 50kpps. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66872638
tc05-64b-2t2c-ethip4-ip4base-snat-1u-1p-mrr [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port. NAT44 is configured between DUTs - 1 user and 1 port (session) per user.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618892, rx 260060055
tc06-1518b-2t2c-ethip4-ip4base-snat-1u-1p-mrr [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port. NAT44 is configured between DUTs - 1 user and 1 port (session) per user.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254852, rx 16254852
tc07-9000b-2t2c-ethip4-ip4base-snat-1u-1p-mrr [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port. NAT44 is configured between DUTs - 1 user and 1 port (session) per user.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc08-imix-2t2c-ethip4-ip4base-snat-1u-1p-mrr [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port. NAT44 is configured between DUTs - 1 user and 1 port (session) per user.
[Ver] Find NDR for IMIX frames using binary search start at 10GE linerate, step 50kpps. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874358
tc09-64b-4t4c-ethip4-ip4base-snat-1u-1p-mrr [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, 2 receive queues per NIC port. NAT44 is configured between DUTs - 1 user and 1 port (session) per user.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618911, rx 262908015
tc10-1518b-4t4c-ethip4-ip4base-snat-1u-1p-mrr [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, 2 receive queues per NIC port. NAT44 is configured between DUTs - 1 user and 1 port (session) per user.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc11-9000b-4t4c-ethip4-ip4base-snat-1u-1p-mrr [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, 2 receive queues per NIC port. NAT44 is configured between DUTs - 1 user and 1 port (session) per user.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc12-imix-4t4c-ethip4-ip4base-snat-1u-1p-mrr [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, 2 receive queues per NIC port. NAT44 is configured between DUTs - 1 user and 1 port (session) per user.
[Ver] Find NDR for IMIX frames using binary search start at 10GE linerate, step 50kpps. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722

7.2.3.26. 10ge2p1x710-ethip4udp-ip4scale1000-udpsrcscale15-nat44-mrr

Raw results NAT44 performance test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4-UDP for IPv4 routing.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing and two static IPv4 /24 and IPv4/20 route entries. DUT1 and DUT2 tested with 2p10GE NIC X710 by Intel.
  • [Ver] TG verification: In MaxReceivedRate test TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
  • [Ref] Applicable standard specifications: RFC2544.
Name Documentation Status
tc01-64b-1t1c-ethip4udp-ip4scale1000-udpsrcscale15-snat-mrr [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port. NAT44 is configured between DUTs - 1000 users and 15 ports (sessions) per user.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618893, rx 66241954
tc02-1518b-1t1c-ethip4udp-ip4scale1000-udpsrcscale15-snat-mrr [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port. NAT44 is configured between DUTs - 1000 users and 15 ports (sessions) per user.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc03-9000b-1t1c-ethip4udp-ip4scale1000-udpsrcscale15-snat-mrr [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port. NAT44 is configured between DUTs - 1000 users and 15 ports (sessions) per user.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771601, rx 2771601
tc04-imix-1t1c-ethip4udp-ip4scale1000-udpsrcscale15-snat-mrr [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port. NAT44 is configured between DUTs - 1000 users and 15 ports (sessions) per user.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 63837894
tc05-64b-2t2c-ethip4udp-ip4scale1000-udpsrcscale15-snat-mrr [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port. NAT44 is configured between DUTs - 1000 users and 15 ports (sessions) per user.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618892, rx 131632657
tc06-1518b-2t2c-ethip4udp-ip4scale1000-udpsrcscale15-snat-mrr [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port. NAT44 is configured between DUTs - 1000 users and 15 ports (sessions) per user.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254852, rx 16254852
tc07-9000b-2t2c-ethip4udp-ip4scale1000-udpsrcscale15-snat-mrr [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port. NAT44 is configured between DUTs - 1000 users and 15 ports (sessions) per user.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc08-imix-2t2c-ethip4udp-ip4scale1000-udpsrcscale15-snat-mrr [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port. NAT44 is configured between DUTs - 1000 users and 15 ports (sessions) per user.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66873854
tc09-64b-4t4c-ethip4udp-ip4scale1000-udpsrcscale15-snat-mrr [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, 2 receive queues per NIC port. NAT44 is configured between DUTs - 1000 users and 15 ports (sessions) per user.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618911, rx 256957655
tc10-1518b-4t4c-ethip4udp-ip4scale1000-udpsrcscale15-snat-mrr [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, 2 receive queues per NIC port. NAT44 is configured between DUTs - 1000 users and 15 ports (sessions) per user.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc11-9000b-4t4c-ethip4udp-ip4scale1000-udpsrcscale15-snat-mrr [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, 2 receive queues per NIC port. NAT44 is configured between DUTs - 1000 users and 15 ports (sessions) per user.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc12-imix-4t4c-ethip4udp-ip4scale1000-udpsrcscale15-snat-mrr [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, 2 receive queues per NIC port. NAT44 is configured between DUTs - 1000 users and 15 ports (sessions) per user.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722

7.2.3.27. 40ge2p1xl710-ethip4-ip4base-mrr

Raw results IPv4 routing test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4 for IPv4 routing.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing and two static IPv4 /24 route entries. DUT1 and DUT2 tested with 2p10GE NIC XL710 by Intel.
  • [Ver] TG verification: In MaxReceivedRate test TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
  • [Ref] Applicable standard specifications: RFC2544.
Name Documentation Status
tc01-64b-1t1c-ethip4-ip4base-mrr [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 374999814, rx 121843367
tc02-1518b-1t1c-ethip4-ip4base-mrr [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 39824422, rx 39822518
tc03-9000b-1t1c-ethip4-ip4base-mrr [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 6790459, rx 6790459
tc04-imix-1t1c-ethip4-ip4base-mrr [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 163843064, rx 140049691
tc05-64b-2t2c-ethip4-ip4base-mrr [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 374999813, rx 245016107
tc06-1518b-2t2c-ethip4-ip4base-mrr [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 39824422, rx 39824422
tc07-9000b-2t2c-ethip4-ip4base-mrr [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 6790458, rx 6789163
tc08-imix-2t2c-ethip4-ip4base-mrr [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 163843066, rx 163842546
tc09-64b-4t4c-ethip4-ip4base-mrr [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 374999842, rx 374944304
tc10-1518b-4t4c-ethip4-ip4base-mrr [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 39824423, rx 39824423
tc11-9000b-4t4c-ethip4-ip4base-mrr [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 6790458, rx 6790458
tc12-imix-4t4c-ethip4-ip4base-mrr [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, 2 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 163843066, rx 163843066

7.2.4. ip4 tunnels

7.2.4.1. 10ge2p1x520-ethip4lispip4-ip4base-mrr

Raw results Lisp test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4-LISP-IPv4 on DUT1-DUT2, Eth-IPv4 on TG-DUTn for IPv4 routing over LISPoIPv4 tunnel.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing and static routes. LISPoIPv4 tunnel is configured between DUT1 and DUT2. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel.
  • [Ver] TG verification: In MaxReceivedRate test TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
  • [Ref] Applicable standard specifications: RFC6830.
Name Documentation Status
tc01-64b-1t1c-ethip4lispip4-ip4base-mrr [Cfg] DUT runs IPv4 LISP remote static mappings and whitelist filters config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 271738986, rx 60020239
tc02-1480b-1t1c-ethip4lispip4-ip4base-mrr [Cfg] DUT runs IPv4 LISP remote static mappings and whitelist filters config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1480B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16578233, rx 16278207
tc03-9000b-1t1c-ethip4lispip4-ip4base-mrr [Cfg] DUT runs IPv4 LISP remote static mappings and whitelist filters config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2769161, rx 2761021
tc04-imix-1t1c-ethip4lispip4-ip4base-mrr [Cfg] DUT runs IPv4 LISP remote static mappings and whitelist filters config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 65473582, rx 59961634
tc05-64b-2t2c-ethip4lispip4-ip4base-mrr [Cfg] DUT runs IPv4 LISP remote static mappings and whitelist filters config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 271738992, rx 106861899
tc06-1480b-2t2c-ethip4lispip4-ip4base-mrr [Cfg] DUT runs IPv4 LISP remote static mappings and whitelist filters config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1480B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16578233, rx 16278170
tc07-9000b-2t2c-ethip4lispip4-ip4base-mrr [Cfg] DUT runs IPv4 LISP remote static mappings and whitelist filters config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2769160, rx 2761023
tc08-imix-2t2c-ethip4lispip4-ip4base-mrr [Cfg] DUT runs IPv4 LISP remote static mappings and whitelist filters config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 65473582, rx 60568349
tc09-64b-4t4c-ethip4lispip4-ip4base-mrr [Cfg] DUT runs IPv4 LISP remote static mappings and whitelist filters config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 271738993, rx 105939962
tc10-1480b-4t4c-ethip4lispip4-ip4base-mrr [Cfg] DUT runs IPv4 LISP remote static mappings and whitelist filters config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 1480B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16578234, rx 16280194
tc11-9000b-4t4c-ethip4lispip4-ip4base-mrr [Cfg] DUT runs IPv4 LISP remote static mappings and whitelist filters config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2769160, rx 2761025
tc12-imix-4t4c-ethip4lispip4-ip4base-mrr [Cfg] DUT runs IPv4 LISP remote static mappings and whitelist filters config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 65473582, rx 60759554

7.2.4.2. 10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-mrr

Raw results L2BD with VXLANoIPv4 test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 bridge domain on TG-DUTn. Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUT1 and DUT2.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge domain. VXLAN tunnels are configured between L2BDs on DUT1 and DUT2. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel.
  • [Ver] TG verification: In MaxReceivedRate test TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
  • [Ref] Applicable standard specifications: RFC2544, RFC7348.
Name Documentation Status
tc01-64b-1t1c-ethip4vxlan-l2bdbasemaclrn-mrr [Cfg] DUT runs L2BD forwarding config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 186567068, rx 65612461
tc02-1518b-1t1c-ethip4vxlan-l2bdbasemaclrn-mrr [Cfg] DUT runs L2BD forwarding config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 15743054, rx 15743054
tc03-9000b-1t1c-ethip4vxlan-l2bdbasemaclrn-mrr [Cfg] DUT runs L2BD forwarding config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Find NDR for 9000 Byte frames using binary search start at 10GE linerate, step 10kpps.
MaxReceivedRate_Results [pkts/10sec]: tx 2756320, rx 2756320
tc04-imix-1t1c-ethip4vxlan-l2bdbasemaclrn-mrr [Cfg] DUT runs L2BD forwarding config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 58985442, rx 58985442
tc05-64b-2t2c-ethip4vxlan-l2bdbasemaclrn-mrr [Cfg] DUT runs L2BD forwarding config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 186567067, rx 127829084
tc06-1518b-2t2c-ethip4vxlan-l2bdbasemaclrn-mrr [Cfg] DUT runs L2BD forwarding config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 15743055, rx 15743055
tc07-9000b-2t2c-ethip4vxlan-l2bdbasemaclrn-mrr [Cfg] DUT runs L2BD forwarding config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Find NDR for 9000 Byte frames using binary search start at 10GE linerate, step 10kpps.
MaxReceivedRate_Results [pkts/10sec]: tx 2756320, rx 2756320
tc08-imix-2t2c-ethip4vxlan-l2bdbasemaclrn-mrr [Cfg] DUT runs L2BD forwarding config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 58985442, rx 58985442
tc09-64b-4t4c-ethip4vxlan-l2bdbasemaclrn-mrr [Cfg] DUT runs L2BD forwarding config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 186567076, rx 186567076
tc10-1518b-4t4c-ethip4vxlan-l2bdbasemaclrn-mrr [Cfg] DUT runs L2BD forwarding config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 15743055, rx 15743055
tc11-9000b-4t4c-ethip4vxlan-l2bdbasemaclrn-mrr [Cfg] DUT runs L2BD forwarding config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Find NDR for 9000 Byte frames using binary search start at 10GE linerate, step 10kpps.
MaxReceivedRate_Results [pkts/10sec]: tx 2756320, rx 2756320
tc12-imix-4t4c-ethip4vxlan-l2bdbasemaclrn-mrr [Cfg] DUT runs L2BD forwarding config with 4 threads, 4 phy cores, 2 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 58985442, rx 58985442

7.2.4.3. 10ge2p1x520-ethip4vxlan-l2xcbase-mrr

Raw results L2XC with VXLANoIPv4 test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 cross-connect on TG-DUTn. Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUT1 and DUT2.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 cross- connect. VXLAN tunnels are configured between L2XCs on DUT1 and DUT2. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel.
  • [Ver] TG verification: In MaxReceivedRate test TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
  • [Ref] Applicable standard specifications: RFC2544, RFC7348.
Name Documentation Status
tc01-64b-1t1c-ethip4vxlan-l2xcbase-mrr [Cfg] DUT runs L2XC forwarding config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 186567068, rx 75456476
tc02-1518b-1t1c-ethip4vxlan-l2xcbase-mrr [Cfg] DUT runs L2XC forwarding config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 15743054, rx 15743054
tc03-9000b-1t1c-ethip4vxlan-l2xcbase-mrr [Cfg] DUT runs L2XC forwarding config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2756320, rx 2756320
tc04-imix-1t1c-ethip4vxlan-l2xcbase-mrr [Cfg] DUT runs L2XC forwarding config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 58985442, rx 58985442
tc05-64b-2t2c-ethip4vxlan-l2xcbase-mrr [Cfg] DUT runs L2XC forwarding config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 186567067, rx 147282462
tc06-1518b-2t2c-ethip4vxlan-l2xcbase-mrr [Cfg] DUT runs L2XC forwarding config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 15743055, rx 15743055
tc07-9000b-2t2c-ethip4vxlan-l2xcbase-mrr [Cfg] DUT runs L2XC forwarding config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2756320, rx 2756320
tc08-imix-2t2c-ethip4vxlan-l2xcbase-mrr [Cfg] DUT runs L2XC forwarding config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 58985442, rx 58985442
tc09-64b-4t4c-ethip4vxlan-l2xcbase-mrr [Cfg] DUT runs L2XC forwarding config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 186567076, rx 186567076
tc10-1518b-4t4c-ethip4vxlan-l2xcbase-mrr [Cfg] DUT runs L2XC forwarding config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 15743055, rx 15743055
tc11-9000b-4t4c-ethip4vxlan-l2xcbase-mrr [Cfg] DUT runs L2XC forwarding config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2756320, rx 2756320
tc12-imix-4t4c-ethip4vxlan-l2xcbase-mrr [Cfg] DUT runs L2XC forwarding config with 4 threads, 4 phy cores, 2 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 58985442, rx 58985442

7.2.4.4. 10ge2p1x710-ethip4lispip4-ip4base-mrr

Raw results Lisp test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4-LISP-IPv4 on DUT1-DUT2, Eth-IPv4 on TG-DUTn for IPv4 routing over LISPoIPv4 tunnel.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing and static routes. LISPoIPv4 tunnel is configured between DUT1 and DUT2. DUT1 and DUT2 tested with 2p10GE NIC X710 by Intel.
  • [Ver] TG verification: In MaxReceivedRate test TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
  • [Ref] Applicable standard specifications: RFC6830.
Name Documentation Status
tc01-64b-1t1c-ethip4lispip4-ip4base-mrr [Cfg] DUT runs IPv4 LISP remote static mappings and whitelist filters config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 271738986, rx 59217879
tc02-1480b-1t1c-ethip4lispip4-ip4base-mrr [Cfg] DUT runs IPv4 LISP remote static mappings and whitelist filters config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1480B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16578233, rx 16278329
tc03-9000b-1t1c-ethip4lispip4-ip4base-mrr [Cfg] DUT runs IPv4 LISP remote static mappings and whitelist filters config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2769161, rx 2761042
tc04-imix-1t1c-ethip4lispip4-ip4base-mrr [Cfg] DUT runs IPv4 LISP remote static mappings and whitelist filters config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 65473582, rx 59608482
tc05-64b-2t2c-ethip4lispip4-ip4base-mrr [Cfg] DUT runs IPv4 LISP remote static mappings and whitelist filters config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 271738992, rx 105194199
tc06-1480b-2t2c-ethip4lispip4-ip4base-mrr [Cfg] DUT runs IPv4 LISP remote static mappings and whitelist filters config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1480B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16578233, rx 16278282
tc07-9000b-2t2c-ethip4lispip4-ip4base-mrr [Cfg] DUT runs IPv4 LISP remote static mappings and whitelist filters config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2769160, rx 2761039
tc08-imix-2t2c-ethip4lispip4-ip4base-mrr [Cfg] DUT runs IPv4 LISP remote static mappings and whitelist filters config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 65473582, rx 60956594
tc09-64b-4t4c-ethip4lispip4-ip4base-mrr [Cfg] DUT runs IPv4 LISP remote static mappings and whitelist filters config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 271738993, rx 104818637
tc10-1480b-4t4c-ethip4lispip4-ip4base-mrr [Cfg] DUT runs IPv4 LISP remote static mappings and whitelist filters config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 1480B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16578234, rx 16280287
tc11-9000b-4t4c-ethip4lispip4-ip4base-mrr [Cfg] DUT runs IPv4 LISP remote static mappings and whitelist filters config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2769160, rx 2761081
tc12-imix-4t4c-ethip4lispip4-ip4base-mrr [Cfg] DUT runs IPv4 LISP remote static mappings and whitelist filters config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 65473582, rx 60946626

7.2.4.5. 10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-mrr

Raw results L2BD with VXLANoIPv4 test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 bridge domain on TG-DUTn. Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUT1 and DUT2.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge domain. VXLAN tunnels are configured between L2BDs on DUT1 and DUT2. DUT1 and DUT2 tested with 2p10GE NIC X710 by Intel.
  • [Ver] TG verification: In MaxReceivedRate test TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
  • [Ref] Applicable standard specifications: RFC2544, RFC7348.
Name Documentation Status
tc01-64b-1t1c-ethip4vxlan-l2bdbasemaclrn-mrr [Cfg] DUT runs L2BD forwarding config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 186567068, rx 65664963
tc02-1518b-1t1c-ethip4vxlan-l2bdbasemaclrn-mrr [Cfg] DUT runs L2BD forwarding config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 15743054, rx 15743054
tc03-9000b-1t1c-ethip4vxlan-l2bdbasemaclrn-mrr [Cfg] DUT runs L2BD forwarding config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Find NDR for 9000 Byte frames using binary search start at 10GE linerate, step 10kpps.
MaxReceivedRate_Results [pkts/10sec]: tx 2756321, rx 2756321
tc04-imix-1t1c-ethip4vxlan-l2bdbasemaclrn-mrr [Cfg] DUT runs L2BD forwarding config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 58985442, rx 58985442
tc05-64b-2t2c-ethip4vxlan-l2bdbasemaclrn-mrr [Cfg] DUT runs L2BD forwarding config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 186567067, rx 127286262
tc06-1518b-2t2c-ethip4vxlan-l2bdbasemaclrn-mrr [Cfg] DUT runs L2BD forwarding config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 15743053, rx 15743053
tc07-9000b-2t2c-ethip4vxlan-l2bdbasemaclrn-mrr [Cfg] DUT runs L2BD forwarding config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Find NDR for 9000 Byte frames using binary search start at 10GE linerate, step 10kpps.
MaxReceivedRate_Results [pkts/10sec]: tx 2756320, rx 2756320
tc08-imix-2t2c-ethip4vxlan-l2bdbasemaclrn-mrr [Cfg] DUT runs L2BD forwarding config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 58985442, rx 58985442
tc09-64b-4t4c-ethip4vxlan-l2bdbasemaclrn-mrr [Cfg] DUT runs L2BD forwarding config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 186567076, rx 186566695
tc10-1518b-4t4c-ethip4vxlan-l2bdbasemaclrn-mrr [Cfg] DUT runs L2BD forwarding config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 15743055, rx 15743055
tc11-9000b-4t4c-ethip4vxlan-l2bdbasemaclrn-mrr [Cfg] DUT runs L2BD forwarding config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Find NDR for 9000 Byte frames using binary search start at 10GE linerate, step 10kpps.
MaxReceivedRate_Results [pkts/10sec]: tx 2756320, rx 2756320
tc12-imix-4t4c-ethip4vxlan-l2bdbasemaclrn-mrr [Cfg] DUT runs L2BD forwarding config with 4 threads, 4 phy cores, 2 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 58985442, rx 58985442

7.2.4.6. 10ge2p1x710-ethip4vxlan-l2xcbase-mrr

Raw results L2XC with VXLANoIPv4 test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 cross-connect on TG-DUTn. Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUT1 and DUT2.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 cross- connect. VXLAN tunnels are configured between L2XCs on DUT1 and DUT2. DUT1 and DUT2 tested with 2p10GE NIC X710 by Intel.
  • [Ver] TG verification: In MaxReceivedRate test TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
  • [Ref] Applicable standard specifications: RFC2544, RFC7348.
Name Documentation Status
tc01-64b-1t1c-ethip4vxlan-l2xcbase-mrr [Cfg] DUT runs L2XC forwarding config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 186567068, rx 75351130
tc02-1518b-1t1c-ethip4vxlan-l2xcbase-mrr [Cfg] DUT runs L2XC forwarding config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 15743054, rx 15743054
tc03-9000b-1t1c-ethip4vxlan-l2xcbase-mrr [Cfg] DUT runs L2XC forwarding config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2756321, rx 2756321
tc04-imix-1t1c-ethip4vxlan-l2xcbase-mrr [Cfg] DUT runs L2XC forwarding config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 58985442, rx 58985442
tc05-64b-2t2c-ethip4vxlan-l2xcbase-mrr [Cfg] DUT runs L2XC forwarding config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 186567067, rx 145212056
tc06-1518b-2t2c-ethip4vxlan-l2xcbase-mrr [Cfg] DUT runs L2XC forwarding config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 15743053, rx 15743053
tc07-9000b-2t2c-ethip4vxlan-l2xcbase-mrr [Cfg] DUT runs L2XC forwarding config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2756320, rx 2756320
tc08-imix-2t2c-ethip4vxlan-l2xcbase-mrr [Cfg] DUT runs L2XC forwarding config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 58985442, rx 58985442
tc09-64b-4t4c-ethip4vxlan-l2xcbase-mrr [Cfg] DUT runs L2XC forwarding config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 186567076, rx 186566899
tc10-1518b-4t4c-ethip4vxlan-l2xcbase-mrr [Cfg] DUT runs L2XC forwarding config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 15743055, rx 15743055
tc11-9000b-4t4c-ethip4vxlan-l2xcbase-mrr [Cfg] DUT runs L2XC forwarding config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2756320, rx 2756320
tc12-imix-4t4c-ethip4vxlan-l2xcbase-mrr [Cfg] DUT runs L2XC forwarding config with 4 threads, 4 phy cores, 2 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 58985442, rx 58985442

7.2.5. ip6

7.2.5.1. 10ge2p1x520-ethip6-ip6base-copwhtlistbase-mrr

Raw results IPv6 whitelist test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv6 for IPv6 routing.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing, two static IPv6 /64 routes and IPv6 COP security whitelist ingress /64 filter entries applied on links TG - DUT1 and DUT2 - TG. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel.
  • [Ver] TG verification: In MaxReceivedRate tests TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv6 header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
  • [Ref] Applicable standard specifications: RFC2544.
Name Documentation Status
tc01-78b-1t1c-ethip6-ip6base-copwhtlistbase-mrr [Cfg] DUT runs IPv6 routing and whitelist filters config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 78B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 255101914, rx 85596366
tc02-1518b-1t1c-ethip6-ip6base-copwhtlistbase-mrr [Cfg] DUT runs IPv6 routing and whitelist filters config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc03-9000b-1t1c-ethip6-ip6base-copwhtlistbase-mrr [Cfg] DUT runs IPv6 routing and whitelist filters config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771601, rx 2771601
tc04-imix-1t1c-ethip6-ip6base-copwhtlistbase-mrr [Cfg] DUT runs IPv6 routing and whitelist filters config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722
tc05-78b-2t2c-ethip6-ip6base-copwhtlistbase-mrr [Cfg] DUT runs IPv6 routing and whitelist filters config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 78B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 255101909, rx 149331079
tc06-1518b-2t2c-ethip6-ip6base-copwhtlistbase-mrr [Cfg] DUT runs IPv6 routing and whitelist filters config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254852, rx 16254852
tc07-9000b-2t2c-ethip6-ip6base-copwhtlistbase-mrr [Cfg] DUT runs IPv6 routing and whitelist filters config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
VAT command sw_interface_set_flags sw_if_index 1 admin-up: no JSON data.
tc08-imix-2t2c-ethip6-ip6base-copwhtlistbase-mrr [Cfg] DUT runs IPv6 routing and whitelist filters config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722
tc09-78b-4t4c-ethip6-ip6base-copwhtlistbase-mrr [Cfg] DUT runs IPv6 routing and whitelist filters config with 4 threads, 4 phy cores, 2 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 78B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 255101910, rx 215278542
tc10-1518b-4t4c-ethip6-ip6base-copwhtlistbase-mrr [Cfg] DUT runs IPv6 routing and whitelist filters config with 4 threads, 4 phy cores, 2 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc11-9000b-4t4c-ethip6-ip6base-copwhtlistbase-mrr [Cfg] DUT runs IPv6 routing and whitelist filters config with 4 threads, 4 phy cores, 2 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc12-imix-4t4c-ethip6-ip6base-copwhtlistbase-mrr [Cfg] DUT runs IPv6 routing and whitelist filters config with 4 threads, 4 phy cores, 2 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722

7.2.5.2. 10ge2p1x520-ethip6-ip6base-iacldstbase-mrr

Raw results IPv6 iAcl whitelist test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv6 for IPv6 routing.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing, two static IPv6 /64 routes and IPv6 iAcl security whitelist ingress /64 filter entries applied on links TG - DUT1 and DUT2 - TG. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel.
  • [Ver] TG verification: In MaxReceivedRate tests TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv6 header and generated payload. MAC addresses are matching MAC addresses of the TG node interfaces.
  • [Ref] Applicable standard specifications: RFC2544.
Name Documentation Status
tc01-78b-1t1c-ethip6-ip6base-iacldstbase-mrr [Cfg] DUT runs IPv6 routing and whitelist filters config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 78B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 255101914, rx 81684821
tc02-1518b-1t1c-ethip6-ip6base-iacldstbase-mrr [Cfg] DUT runs IPv6 routing and whitelist filters config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc03-9000b-1t1c-ethip6-ip6base-iacldstbase-mrr [Cfg] DUT runs IPv6 routing and whitelist filters config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771601, rx 2771601
tc04-imix-1t1c-ethip6-ip6base-iacldstbase-mrr [Cfg] DUT runs IPv6 routing and whitelist filters config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722
tc05-78b-2t2c-ethip6-ip6base-iacldstbase-mrr [Cfg] DUT runs IPv6 routing and whitelist filters config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 78B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 255101909, rx 139773599
tc06-1518b-2t2c-ethip6-ip6base-iacldstbase-mrr [Cfg] DUT runs IPv6 routing and whitelist filters config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254852, rx 16254852
tc07-9000b-2t2c-ethip6-ip6base-iacldstbase-mrr [Cfg] DUT runs IPv6 routing and whitelist filters config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc08-imix-2t2c-ethip6-ip6base-iacldstbase-mrr [Cfg] DUT runs IPv6 routing and whitelist filters config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722
tc09-78b-4t4c-ethip6-ip6base-iacldstbase-mrr [Cfg] DUT runs IPv6 routing and whitelist filters config with 4 threads, 4 phy cores, 2 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 78B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 255101910, rx 213863164
tc10-1518b-4t4c-ethip6-ip6base-iacldstbase-mrr [Cfg] DUT runs IPv6 routing and whitelist filters config with 4 threads, 4 phy cores, 2 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc11-9000b-4t4c-ethip6-ip6base-iacldstbase-mrr [Cfg] DUT runs IPv6 routing and whitelist filters config with 4 threads, 4 phy cores, 2 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc12-imix-4t4c-ethip6-ip6base-iacldstbase-mrr [Cfg] DUT runs IPv6 routing and whitelist filters config with 4 threads, 4 phy cores, 2 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722

7.2.5.3. 10ge2p1x520-ethip6-ip6base-mrr

Raw results IPv6 routing test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv6 for IPv6 routing.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and two static IPv6 /64 route entries. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel.
  • [Ver] TG verification: In MaxReceivedRate test TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv6 header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
  • [Ref] Applicable standard specifications: RFC2544.
Name Documentation Status
tc01-78b-1t1c-ethip6-ip6base-mrr [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 255101914, rx 102562696
tc02-1518b-1t1c-ethip6-ip6base-mrr [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc03-9000b-1t1c-ethip6-ip6base-mrr [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771601, rx 2771601
tc04-imix-1t1c-ethip6-ip6base-mrr [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722
tc05-78b-2t2c-ethip6-ip6base-mrr [Cfg] DUT runs IPv6 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 255101909, rx 208379848
tc06-1518b-2t2c-ethip6-ip6base-mrr [Cfg] DUT runs IPv6 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254852, rx 16254852
tc07-9000b-2t2c-ethip6-ip6base-mrr [Cfg] DUT runs IPv6 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc08-imix-2t2c-ethip6-ip6base-mrr [Cfg] DUT runs IPv6 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722
tc09-78b-4t4c-ethip6-ip6base-mrr [Cfg] DUT runs IPv6 routing config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 255101910, rx 215297951
tc10-1518b-4t4c-ethip6-ip6base-mrr [Cfg] DUT runs IPv6 routing config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc11-9000b-4t4c-ethip6-ip6base-mrr [Cfg] DUT runs IPv6 routing config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc12-imix-4t4c-ethip6-ip6base-mrr [Cfg] DUT runs IPv6 routing config with 4 threads, 4 phy cores, 2 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722

7.2.5.4. 10ge2p1x520-ethip6-ip6scale200k-mrr

Raw results IPv6 routing test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv6 for IPv6 routing.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and 2x100k static IPv6 /64 route entries. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel.
  • [Ver] TG verification: In MaxReceivedRate tests TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 100k flows per flow-group) with all packets containing Ethernet header, IPv6 header withq IP and static payload. MAC addresses are matching MAC addresses of the TG node interfaces. Incrementing of IP.dst (IPv6 destination address) field is applied to both streams.
  • [Ref] Applicable standard specifications: RFC2544.
Name Documentation Status
tc01-78b-1t1c-ethip6-ip6base-ip6scale200k-mrr [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 78B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 255101913, rx 71557698
tc02-1518b-1t1c-ethip6-ip6base-ip6scale200k-mrr [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc03-9000b-1t1c-ethip6-ip6base-ip6scale200k-mrr [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc04-imix-1t1c-ethip6-ip6base-ip6scale200k-mrr [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 60142795
tc05-78b-2t2c-ethip6-ip6base-ip6scale200k-mrr [Cfg] DUT runs IPv6 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 78B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 255101909, rx 139916249
tc06-1518b-2t2c-ethip6-ip6base-ip6scale200k-mrr [Cfg] DUT runs IPv6 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc07-9000b-2t2c-ethip6-ip6base-ip6scale200k-mrr [Cfg] DUT runs IPv6 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc08-imix-2t2c-ethip6-ip6base-ip6scale200k-mrr [Cfg] DUT runs IPv6 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722
tc09-78b-4t4c-ethip6-ip6base-ip6scale200k-mrr [Cfg] DUT runs IPv6 routing config with 4 threads, 4 phy cores, 2 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 78B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 255101910, rx 207125410
tc10-1518b-4t4c-ethip6-ip6base-ip6scale200k-mrr [Cfg] DUT runs IPv6 routing config with 4 threads, 4 phy cores, 2 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc11-9000b-4t4c-ethip6-ip6base-ip6scale200k-mrr [Cfg] DUT runs IPv6 routing config with 4 threads, 4 phy cores, 2 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc12-imix-4t4c-ethip6-ip6base-ip6scale200k-mrr [Cfg] DUT runs IPv6 routing config with 4 threads, 4 phy cores, 2 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722

7.2.5.5. 10ge2p1x520-ethip6-ip6scale20k-mrr

Raw results IPv6 routing test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv6 for IPv6 routing.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and 2x10k static IPv6 /64 route entries. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel.
  • [Ver] TG verification: In MaxReceivedRate tests TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 10k flows per flow-group) with all packets containing Ethernet header, IPv6 header withq IP and static payload. MAC addresses are matching MAC addresses of the TG node interfaces. Incrementing of IP.dst (IPv6 destination address) field is applied to both streams.
  • [Ref] Applicable standard specifications: RFC2544.
Name Documentation Status
tc01-78b-1t1c-ethip6-ip6base-ip6scale20k-mrr [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 78B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 255101914, rx 85678825
tc02-1518b-1t1c-ethip6-ip6base-ip6scale20k-mrr [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc03-9000b-1t1c-ethip6-ip6base-ip6scale20k-mrr [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771601, rx 2771601
tc04-imix-1t1c-ethip6-ip6base-ip6scale20k-mrr [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722
tc05-78b-2t2c-ethip6-ip6base-ip6scale20k-mrr [Cfg] DUT runs IPv6 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 78B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 255101909, rx 173245833
tc06-1518b-2t2c-ethip6-ip6base-ip6scale20k-mrr [Cfg] DUT runs IPv6 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254852, rx 16254852
tc07-9000b-2t2c-ethip6-ip6base-ip6scale20k-mrr [Cfg] DUT runs IPv6 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc08-imix-2t2c-ethip6-ip6base-ip6scale20k-mrr [Cfg] DUT runs IPv6 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722
tc09-78b-4t4c-ethip6-ip6base-ip6scale20k-mrr [Cfg] DUT runs IPv6 routing config with 4 threads, 4 phy cores, 2 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 78B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 255101910, rx 215558919
tc10-1518b-4t4c-ethip6-ip6base-ip6scale20k-mrr [Cfg] DUT runs IPv6 routing config with 4 threads, 4 phy cores, 2 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc11-9000b-4t4c-ethip6-ip6base-ip6scale20k-mrr [Cfg] DUT runs IPv6 routing config with 4 threads, 4 phy cores, 2 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc12-imix-4t4c-ethip6-ip6base-ip6scale20k-mrr [Cfg] DUT runs IPv6 routing config with 4 threads, 4 phy cores, 2 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722

7.2.5.6. 10ge2p1x520-ethip6-ip6scale2m-mrr

Raw results IPv6 routing test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv6 for IPv6 routing.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and 2x1M static IPv6 /64 route entries. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel.
  • [Ver] TG verification: In MaxReceivedRate tests TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 1M flows per flow-group) with all packets containing Ethernet header, IPv6 header withq IP and static payload. MAC addresses are matching MAC addresses of the TG node interfaces. Incrementing of IP.dst (IPv6 destination address) field is applied to both streams.
  • [Ref] Applicable standard specifications: RFC2544.
Name Documentation Status
tc01-78b-1t1c-ethip6-ip6base-ip6scale2m-mrr [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 78B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 255101914, rx 51515647
tc02-1518b-1t1c-ethip6-ip6base-ip6scale2m-mrr [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc03-9000b-1t1c-ethip6-ip6base-ip6scale2m-mrr [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc04-imix-1t1c-ethip6-ip6base-ip6scale2m-mrr [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 50701430
tc05-78b-2t2c-ethip6-ip6base-ip6scale2m-mrr [Cfg] DUT runs IPv6 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 78B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 255101936, rx 105514408
tc06-1518b-2t2c-ethip6-ip6base-ip6scale2m-mrr [Cfg] DUT runs IPv6 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc07-9000b-2t2c-ethip6-ip6base-ip6scale2m-mrr [Cfg] DUT runs IPv6 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc08-imix-2t2c-ethip6-ip6base-ip6scale2m-mrr [Cfg] DUT runs IPv6 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722
tc09-78b-4t4c-ethip6-ip6base-ip6scale2m-mrr [Cfg] DUT runs IPv6 routing config with 4 threads, 4 phy cores, 2 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 78B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 255101935, rx 185760773
tc10-1518b-4t4c-ethip6-ip6base-ip6scale2m-mrr [Cfg] DUT runs IPv6 routing config with 4 threads, 4 phy cores, 2 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254852, rx 16254852
tc11-9000b-4t4c-ethip6-ip6base-ip6scale2m-mrr [Cfg] DUT runs IPv6 routing config with 4 threads, 4 phy cores, 2 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771599, rx 2771599
tc12-imix-4t4c-ethip6-ip6base-ip6scale2m-mrr [Cfg] DUT runs IPv6 routing config with 4 threads, 4 phy cores, 2 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722

7.2.5.7. 10ge2p1x710-ethip6-ip6base-copwhtlistbase-mrr

Raw results IPv6 whitelist test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv6 for IPv6 routing.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing, two static IPv6 /64 routes and IPv6 COP security whitelist ingress /64 filter entries applied on links TG - DUT1 and DUT2 - TG. DUT1 and DUT2 tested with 2p10GE NIC X710 by Intel.
  • [Ver] TG verification: In MaxReceivedRate tests TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv6 header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
  • [Ref] Applicable standard specifications: RFC2544.
Name Documentation Status
tc01-78b-1t1c-ethip6-ip6base-copwhtlistbase-mrr [Cfg] DUT runs IPv6 routing and whitelist filters config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 78B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 255101914, rx 83721562
tc02-1518b-1t1c-ethip6-ip6base-copwhtlistbase-mrr [Cfg] DUT runs IPv6 routing and whitelist filters config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc03-9000b-1t1c-ethip6-ip6base-copwhtlistbase-mrr [Cfg] DUT runs IPv6 routing and whitelist filters config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771601, rx 2771601
tc04-imix-1t1c-ethip6-ip6base-copwhtlistbase-mrr [Cfg] DUT runs IPv6 routing and whitelist filters config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722
tc05-78b-2t2c-ethip6-ip6base-copwhtlistbase-mrr [Cfg] DUT runs IPv6 routing and whitelist filters config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 78B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 255101909, rx 148500803
tc06-1518b-2t2c-ethip6-ip6base-copwhtlistbase-mrr [Cfg] DUT runs IPv6 routing and whitelist filters config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254852, rx 16254852
tc07-9000b-2t2c-ethip6-ip6base-copwhtlistbase-mrr [Cfg] DUT runs IPv6 routing and whitelist filters config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc08-imix-2t2c-ethip6-ip6base-copwhtlistbase-mrr [Cfg] DUT runs IPv6 routing and whitelist filters config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722
tc09-78b-4t4c-ethip6-ip6base-copwhtlistbase-mrr [Cfg] DUT runs IPv6 routing and whitelist filters config with 4 threads, 4 phy cores, 2 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 78B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 255101910, rx 255101158
tc10-1518b-4t4c-ethip6-ip6base-copwhtlistbase-mrr [Cfg] DUT runs IPv6 routing and whitelist filters config with 4 threads, 4 phy cores, 2 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc11-9000b-4t4c-ethip6-ip6base-copwhtlistbase-mrr [Cfg] DUT runs IPv6 routing and whitelist filters config with 4 threads, 4 phy cores, 2 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc12-imix-4t4c-ethip6-ip6base-copwhtlistbase-mrr [Cfg] DUT runs IPv6 routing and whitelist filters config with 4 threads, 4 phy cores, 2 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722

7.2.5.8. 10ge2p1x710-ethip6-ip6base-iacldstbase-mrr

Raw results IPv6 iAcl whitelist test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv6 for IPv6 routing.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing, two static IPv6 /64 routes and IPv6 iAcl security whitelist ingress /64 filter entries applied on links TG - DUT1 and DUT2 - TG. DUT1 and DUT2 tested with 2p10GE NIC X710 by Intel.
  • [Ver] TG verification: In MaxReceivedRate tests TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv6 header and generated payload. MAC addresses are matching MAC addresses of the TG node interfaces.
  • [Ref] Applicable standard specifications: RFC2544.
Name Documentation Status
tc01-78b-1t1c-ethip6-ip6base-iacldstbase-mrr [Cfg] DUT runs IPv6 routing and whitelist filters config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 78B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 255101914, rx 80020672
tc02-1518b-1t1c-ethip6-ip6base-iacldstbase-mrr [Cfg] DUT runs IPv6 routing and whitelist filters config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc03-9000b-1t1c-ethip6-ip6base-iacldstbase-mrr [Cfg] DUT runs IPv6 routing and whitelist filters config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771601, rx 2771601
tc04-imix-1t1c-ethip6-ip6base-iacldstbase-mrr [Cfg] DUT runs IPv6 routing and whitelist filters config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722
tc05-78b-2t2c-ethip6-ip6base-iacldstbase-mrr [Cfg] DUT runs IPv6 routing and whitelist filters config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 78B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 255101909, rx 139183263
tc06-1518b-2t2c-ethip6-ip6base-iacldstbase-mrr [Cfg] DUT runs IPv6 routing and whitelist filters config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254852, rx 16254852
tc07-9000b-2t2c-ethip6-ip6base-iacldstbase-mrr [Cfg] DUT runs IPv6 routing and whitelist filters config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc08-imix-2t2c-ethip6-ip6base-iacldstbase-mrr [Cfg] DUT runs IPv6 routing and whitelist filters config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722
tc09-78b-4t4c-ethip6-ip6base-iacldstbase-mrr [Cfg] DUT runs IPv6 routing and whitelist filters config with 4 threads, 4 phy cores, 2 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 78B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 255101910, rx 254842640
tc10-1518b-4t4c-ethip6-ip6base-iacldstbase-mrr [Cfg] DUT runs IPv6 routing and whitelist filters config with 4 threads, 4 phy cores, 2 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc11-9000b-4t4c-ethip6-ip6base-iacldstbase-mrr [Cfg] DUT runs IPv6 routing and whitelist filters config with 4 threads, 4 phy cores, 2 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc12-imix-4t4c-ethip6-ip6base-iacldstbase-mrr [Cfg] DUT runs IPv6 routing and whitelist filters config with 4 threads, 4 phy cores, 2 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722

7.2.5.9. 10ge2p1x710-ethip6-ip6base-mrr

Raw results IPv6 routing test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv6 for IPv6 routing.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and two static IPv6 /64 route entries. DUT1 and DUT2 tested with 2p10GE NIC X710 by Intel.
  • [Ver] TG verification: In MaxReceivedRate test TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv6 header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
  • [Ref] Applicable standard specifications: RFC2544.
Name Documentation Status
tc01-78b-1t1c-ethip6-ip6base-mrr [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 255101914, rx 100499225
tc02-1518b-1t1c-ethip6-ip6base-mrr [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc03-9000b-1t1c-ethip6-ip6base-mrr [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771601, rx 2771601
tc04-imix-1t1c-ethip6-ip6base-mrr [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722
tc05-78b-2t2c-ethip6-ip6base-mrr [Cfg] DUT runs IPv6 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 255101909, rx 205203165
tc06-1518b-2t2c-ethip6-ip6base-mrr [Cfg] DUT runs IPv6 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254852, rx 16254852
tc07-9000b-2t2c-ethip6-ip6base-mrr [Cfg] DUT runs IPv6 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc08-imix-2t2c-ethip6-ip6base-mrr [Cfg] DUT runs IPv6 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722
tc09-78b-4t4c-ethip6-ip6base-mrr [Cfg] DUT runs IPv6 routing config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 255101910, rx 255101330
tc10-1518b-4t4c-ethip6-ip6base-mrr [Cfg] DUT runs IPv6 routing config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc11-9000b-4t4c-ethip6-ip6base-mrr [Cfg] DUT runs IPv6 routing config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc12-imix-4t4c-ethip6-ip6base-mrr [Cfg] DUT runs IPv6 routing config with 4 threads, 4 phy cores, 2 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722

7.2.5.10. 10ge2p1x710-ethip6-ip6scale200k-mrr

Raw results IPv6 routing test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv6 for IPv6 routing.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and 2x100k static IPv6 /64 route entries. DUT1 and DUT2 tested with 2p10GE NIC X710 by Intel.
  • [Ver] TG verification: In MaxReceivedRate tests TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 100k flows per flow-group) with all packets containing Ethernet header, IPv6 header withq IP and static payload. MAC addresses are matching MAC addresses of the TG node interfaces. Incrementing of IP.dst (IPv6 destination address) field is applied to both streams.
  • [Ref] Applicable standard specifications: RFC2544.
Name Documentation Status
tc01-78b-1t1c-ethip6-ip6base-ip6scale200k-mrr [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 78B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 255101913, rx 73113338
tc02-1518b-1t1c-ethip6-ip6base-ip6scale200k-mrr [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc03-9000b-1t1c-ethip6-ip6base-ip6scale200k-mrr [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc04-imix-1t1c-ethip6-ip6base-ip6scale200k-mrr [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 59539846
tc05-78b-2t2c-ethip6-ip6base-ip6scale200k-mrr [Cfg] DUT runs IPv6 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 78B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 255101909, rx 139790566
tc06-1518b-2t2c-ethip6-ip6base-ip6scale200k-mrr [Cfg] DUT runs IPv6 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc07-9000b-2t2c-ethip6-ip6base-ip6scale200k-mrr [Cfg] DUT runs IPv6 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc08-imix-2t2c-ethip6-ip6base-ip6scale200k-mrr [Cfg] DUT runs IPv6 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722
tc09-78b-4t4c-ethip6-ip6base-ip6scale200k-mrr [Cfg] DUT runs IPv6 routing config with 4 threads, 4 phy cores, 2 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 78B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 255101910, rx 213256768
tc10-1518b-4t4c-ethip6-ip6base-ip6scale200k-mrr [Cfg] DUT runs IPv6 routing config with 4 threads, 4 phy cores, 2 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc11-9000b-4t4c-ethip6-ip6base-ip6scale200k-mrr [Cfg] DUT runs IPv6 routing config with 4 threads, 4 phy cores, 2 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc12-imix-4t4c-ethip6-ip6base-ip6scale200k-mrr [Cfg] DUT runs IPv6 routing config with 4 threads, 4 phy cores, 2 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722

7.2.5.11. 10ge2p1x710-ethip6-ip6scale20k-mrr

Raw results IPv6 routing test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv6 for IPv6 routing.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and 2x10k static IPv6 /64 route entries. DUT1 and DUT2 tested with 2p10GE NIC X710 by Intel.
  • [Ver] TG verification: In MaxReceivedRate tests TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 10k flows per flow-group) with all packets containing Ethernet header, IPv6 header withq IP and static payload. MAC addresses are matching MAC addresses of the TG node interfaces. Incrementing of IP.dst (IPv6 destination address) field is applied to both streams.
  • [Ref] Applicable standard specifications: RFC2544.
Name Documentation Status
tc01-78b-1t1c-ethip6-ip6base-ip6scale20k-mrr [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 78B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 255101914, rx 84870349
tc02-1518b-1t1c-ethip6-ip6base-ip6scale20k-mrr [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc03-9000b-1t1c-ethip6-ip6base-ip6scale20k-mrr [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771601, rx 2771601
tc04-imix-1t1c-ethip6-ip6base-ip6scale20k-mrr [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722
tc05-78b-2t2c-ethip6-ip6base-ip6scale20k-mrr [Cfg] DUT runs IPv6 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 78B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 255101909, rx 174933068
tc06-1518b-2t2c-ethip6-ip6base-ip6scale20k-mrr [Cfg] DUT runs IPv6 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254852, rx 16254852
tc07-9000b-2t2c-ethip6-ip6base-ip6scale20k-mrr [Cfg] DUT runs IPv6 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc08-imix-2t2c-ethip6-ip6base-ip6scale20k-mrr [Cfg] DUT runs IPv6 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722
tc09-78b-4t4c-ethip6-ip6base-ip6scale20k-mrr [Cfg] DUT runs IPv6 routing config with 4 threads, 4 phy cores, 2 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 78B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 255101910, rx 255100260
tc10-1518b-4t4c-ethip6-ip6base-ip6scale20k-mrr [Cfg] DUT runs IPv6 routing config with 4 threads, 4 phy cores, 2 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc11-9000b-4t4c-ethip6-ip6base-ip6scale20k-mrr [Cfg] DUT runs IPv6 routing config with 4 threads, 4 phy cores, 2 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc12-imix-4t4c-ethip6-ip6base-ip6scale20k-mrr [Cfg] DUT runs IPv6 routing config with 4 threads, 4 phy cores, 2 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722

7.2.5.12. 10ge2p1x710-ethip6-ip6scale2m-mrr

Raw results IPv6 routing test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv6 for IPv6 routing.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and 2x1M static IPv6 /64 route entries. DUT1 and DUT2 tested with 2p10GE NIC X710 by Intel.
  • [Ver] TG verification: In MaxReceivedRate tests TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 1M flows per flow-group) with all packets containing Ethernet header, IPv6 header withq IP and static payload. MAC addresses are matching MAC addresses of the TG node interfaces. Incrementing of IP.dst (IPv6 destination address) field is applied to both streams.
  • [Ref] Applicable standard specifications: RFC2544.
Name Documentation Status
tc01-78b-1t1c-ethip6-ip6base-ip6scale2m-mrr [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 78B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 255101909, rx 53063306
tc02-1518b-1t1c-ethip6-ip6base-ip6scale2m-mrr [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc03-9000b-1t1c-ethip6-ip6base-ip6scale2m-mrr [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc04-imix-1t1c-ethip6-ip6base-ip6scale2m-mrr [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 50075583
tc05-78b-2t2c-ethip6-ip6base-ip6scale2m-mrr [Cfg] DUT runs IPv6 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 78B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 255101936, rx 108787809
tc06-1518b-2t2c-ethip6-ip6base-ip6scale2m-mrr [Cfg] DUT runs IPv6 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc07-9000b-2t2c-ethip6-ip6base-ip6scale2m-mrr [Cfg] DUT runs IPv6 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc08-imix-2t2c-ethip6-ip6base-ip6scale2m-mrr [Cfg] DUT runs IPv6 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722
tc09-78b-4t4c-ethip6-ip6base-ip6scale2m-mrr [Cfg] DUT runs IPv6 routing config with 4 threads, 4 phy cores, 2 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 78B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 255101935, rx 186383160
tc10-1518b-4t4c-ethip6-ip6base-ip6scale2m-mrr [Cfg] DUT runs IPv6 routing config with 4 threads, 4 phy cores, 2 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254852, rx 16254852
tc11-9000b-4t4c-ethip6-ip6base-ip6scale2m-mrr [Cfg] DUT runs IPv6 routing config with 4 threads, 4 phy cores, 2 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771599, rx 2771599
tc12-imix-4t4c-ethip6-ip6base-ip6scale2m-mrr [Cfg] DUT runs IPv6 routing config with 4 threads, 4 phy cores, 2 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722

7.2.5.13. 40ge2p1xl710-ethip6-ip6base-mrr

Raw results IPv6 routing test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv6 for IPv6 routing.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv6 routing and two static IPv6 /64 route entries. DUT1 and DUT2 tested with 2p40GE NIC XL710 by Intel.
  • [Ver] TG verification: In MaxReceivedRate test TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv6 header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
  • [Ref] Applicable standard specifications: RFC2544.
Name Documentation Status
tc01-78b-1t1c-ethip6-ip6base-mrr [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 374999814, rx 103072804
tc02-1518b-1t1c-ethip6-ip6base-mrr [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 39824422, rx 39823165
tc03-9000b-1t1c-ethip6-ip6base-mrr [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 6790459, rx 6789261
tc04-imix-1t1c-ethip6-ip6base-mrr [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B;16x570B;4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 163843064, rx 126074834
tc05-78b-2t2c-ethip6-ip6base-mrr [Cfg] DUT runs IPv6 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 374999813, rx 211273633
tc06-1518b-2t2c-ethip6-ip6base-mrr [Cfg] DUT runs IPv6 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 39824422, rx 39824422
tc07-9000b-2t2c-ethip6-ip6base-mrr [Cfg] DUT runs IPv6 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 6790458, rx 6789764
tc08-imix-2t2c-ethip6-ip6base-mrr [Cfg] DUT runs IPv6 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B;16x570B;4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 163843066, rx 163843066
tc09-78b-4t4c-ethip6-ip6base-mrr [Cfg] DUT runs IPv6 routing config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 374999842, rx 374937585
tc10-1518b-4t4c-ethip6-ip6base-mrr [Cfg] DUT runs IPv6 routing config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 39824423, rx 39824423
tc11-9000b-4t4c-ethip6-ip6base-mrr [Cfg] DUT runs IPv6 routing config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 6790458, rx 6789724
tc12-imix-4t4c-ethip6-ip6base-mrr [Cfg] DUT runs IPv6 routing config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B;16x570B;4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 163843066, rx 163843066

7.2.6. l2

7.2.6.1. 10ge2p1x520-dot1q-l2bdbasemaclrn-mrr

Raw results L2BD test cases with 802.1q test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4. 802.1q tagging is applied on link between DUT1 and DUT2.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge domain and MAC learning enabled. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel.
  • [Ver] TG verification: In MaxReceivedRate tests TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
  • [Ref] Applicable standard specifications: RFC2544.
Name Documentation Status
tc01-64b-1t1c-dot1q-l2bdbasemaclrn-mrr [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 284090759, rx 78688687
tc02-1518b-1t1c-dot1q-l2bdbasemaclrn-mrr [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16212694, rx 16212694
tc03-9000b-1t1c-dot1q-l2bdbasemaclrn-mrr [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2770379, rx 2770379
tc04-imix-1t1c-dot1q-l2bdbasemaclrn-mrr [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66166742, rx 66166742
tc05-64b-2t2c-dot1q-l2bdbasemaclrn-mrr [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 284090758, rx 157370240
tc06-1518b-2t2c-dot1q-l2bdbasemaclrn-mrr [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16212693, rx 16212693
tc07-9000b-2t2c-dot1q-l2bdbasemaclrn-mrr [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2770381, rx 2770381
tc08-imix-2t2c-dot1q-l2bdbasemaclrn-mrr [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66166742, rx 66166742
tc09-64b-4t4c-dot1q-l2bdbasemaclrn-mrr [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 284090759, rx 234225651
tc10-1518b-4t4c-dot1q-l2bdbasemaclrn-mrr [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16212693, rx 16212693
tc11-9000b-4t4c-dot1q-l2bdbasemaclrn-mrr [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2770381, rx 2770381
tc12-imix-4t4c-dot1q-l2bdbasemaclrn-mrr [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66166742, rx 66166742

7.2.6.2. 10ge2p1x520-dot1q-l2xcbase-mrr

Raw results L2XC with 802.1q test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 cross connect. 802.1q tagging is applied on link between DUT1 and DUT2.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 cross- connect. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel.
  • [Ver] TG verification: In MaxReceivedRate tests TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
  • [Ref] Applicable standard specifications: RFC2544.
Name Documentation Status
tc01-64b-1t1c-dot1q-l2xcbase-mrr [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618893, rx 92920079
tc02-1518b-1t1c-dot1q-l2xcbase-mrr [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16214853
tc03-9000b-1t1c-dot1q-l2xcbase-mrr [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2770807
tc04-imix-1t1c-dot1q-l2xcbase-mrr [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66066012
tc05-64b-2t2c-dot1q-l2xcbase-mrr [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618892, rx 185830075
tc06-1518b-2t2c-dot1q-l2xcbase-mrr [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16214851
tc07-9000b-2t2c-dot1q-l2xcbase-mrr [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2770808
tc08-imix-2t2c-dot1q-l2xcbase-mrr [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66045291
tc09-64b-4t4c-dot1q-l2xcbase-mrr [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618911, rx 232887208
tc10-1518b-4t4c-dot1q-l2xcbase-mrr [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16214861
tc11-9000b-4t4c-dot1q-l2xcbase-mrr [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2770808
tc12-imix-4t4c-dot1q-l2xcbase-mrr [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66073457

7.2.6.3. 10ge2p1x520-eth-l2bdbasemaclrn-iacl1sf-10kflows-mrr

Raw results L2BD test cases with ACL

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.
  • [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
  • [Ver] TG verification: In MaxReceivedRate tests TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 10k flows per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
  • [Ref] Applicable standard specifications: RFC2544.
Name Documentation Status
tc01-64b-1t1c-eth-l2bdbasemaclrn-iacl1-stateful-flows10k-mrr [Cfg] DUT runs L2BD switching config with ACL with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618893, rx 46531896
tc02-1518b-1t1c-eth-l2bdbasemaclrn-iacl1-stateful-flows10k-mrr [Cfg] DUT runs L2BD switching config with ACL with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc03-9000b-1t1c-eth-l2bdbasemaclrn-iacl1-stateful-flows10k-mrr [Cfg] DUT runs L2BD switching config with ACL with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc04-imix-1t1c-eth-l2bdbasemaclrn-iacl1-stateful-flows10k-mrr [Cfg] DUT runs L2BD switching config with ACL with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 45312470
tc05-64b-2t2c-eth-l2bdbasemaclrn-iacl1-stateful-flows10k-mrr [Cfg] DUT runs L2BD switching config with ACL with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618892, rx 86336843
tc06-1518b-2t2c-eth-l2bdbasemaclrn-iacl1-stateful-flows10k-mrr [Cfg] DUT runs L2BD switching config with ACL with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc07-9000b-2t2c-eth-l2bdbasemaclrn-iacl1-stateful-flows10k-mrr [Cfg] DUT runs L2BD switching config with ACL with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc08-imix-2t2c-eth-l2bdbasemaclrn-iacl1-stateful-flows10k-mrr [Cfg] DUT runs L2BD switching config with ACL with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722
tc09-64b-4t4c-eth-l2bdbasemaclrn-iacl1-stateful-flows10k-mrr [Cfg] DUT runs L2BD switching config with ACL with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618911, rx 125910027
tc10-1518b-2t2c-eth-l2bdbasemaclrn-iacl1-stateful-flows10k-mrr [Cfg] DUT runs L2BD switching config with ACL with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc11-9000b-2t2c-eth-l2bdbasemaclrn-iacl1-stateful-flows10k-mrr [Cfg] DUT runs L2BD switching config with ACL with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc12-imix-2t2c-eth-l2bdbasemaclrn-iacl1-stateful-flows10k-mrr [Cfg] DUT runs L2BD switching config with ACL with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722

7.2.6.4. 10ge2p1x520-eth-l2bdbasemaclrn-iacl1sl-10kflows-mrr

Raw results L2BD test cases with ACL

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.
  • [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
  • [Ver] TG verification: In MaxReceivedRate tests TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 10k flows per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
  • [Ref] Applicable standard specifications: RFC2544.
Name Documentation Status
tc01-64b-1t1c-eth-l2bdbasemaclrn-iacl1-stateless-flows10k-mrr [Cfg] DUT runs L2BD switching config with ACL with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618893, rx 40930234
tc02-1518b-1t1c-eth-l2bdbasemaclrn-iacl1-stateless-flows10k-mrr [Cfg] DUT runs L2BD switching config with ACL with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc03-9000b-1t1c-eth-l2bdbasemaclrn-iacl1-stateless-flows10k-mrr [Cfg] DUT runs L2BD switching config with ACL with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc04-imix-1t1c-eth-l2bdbasemaclrn-iacl1-stateless-flows10k-mrr [Cfg] DUT runs L2BD switching config with ACL with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 41098855
tc05-64b-2t2c-eth-l2bdbasemaclrn-iacl1-stateless-flows10k-mrr [Cfg] DUT runs L2BD switching config with ACL with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618892, rx 71225472
tc06-1518b-2t2c-eth-l2bdbasemaclrn-iacl1-stateless-flows10k-mrr [Cfg] DUT runs L2BD switching config with ACL with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc07-9000b-2t2c-eth-l2bdbasemaclrn-iacl1-stateless-flows10k-mrr [Cfg] DUT runs L2BD switching config with ACL with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc08-imix-2t2c-eth-l2bdbasemaclrn-iacl1-stateless-flows10k-mrr [Cfg] DUT runs L2BD switching config with ACL with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722
tc09-64b-4t4c-eth-l2bdbasemaclrn-iacl1-stateless-flows10k-mrr [Cfg] DUT runs L2BD switching config with ACL with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618911, rx 104944562
tc10-1518b-4t4c-eth-l2bdbasemaclrn-iacl1-stateless-flows10k-mrr [Cfg] DUT runs L2BD switching config with ACL with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc11-9000b-4t4c-eth-l2bdbasemaclrn-iacl1-stateless-flows10k-mrr [Cfg] DUT runs L2BD switching config with ACL with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc12-imix-4t4c-eth-l2bdbasemaclrn-iacl1-stateless-flows10k-mrr [Cfg] DUT runs L2BD switching config with ACL with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722

7.2.6.5. 10ge2p1x520-eth-l2bdbasemaclrn-iacl50sf-10kflows-mrr

Raw results L2BD test cases with ACL

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.
  • [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
  • [Ver] TG verification: In MaxReceivedRate tests TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 10k flows per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
  • [Ref] Applicable standard specifications: RFC2544.
Name Documentation Status
tc01-64b-1t1c-eth-l2bdbasemaclrn-iacl50-stateful-flows10k-mrr [Cfg] DUT runs L2BD switching config with ACL with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618893, rx 46560754
tc02-1518b-1t1c-eth-l2bdbasemaclrn-iacl50-stateful-flows10k-mrr [Cfg] DUT runs L2BD switching config with ACL with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc03-9000b-1t1c-eth-l2bdbasemaclrn-iacl50-stateful-flows10k-mrr [Cfg] DUT runs L2BD switching config with ACL with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc04-imix-1t1c-eth-l2bdbasemaclrn-iacl50-stateful-flows10k-mrr [Cfg] DUT runs L2BD switching config with ACL with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 45253223
tc05-64b-2t2c-eth-l2bdbasemaclrn-iacl50-stateful-flows10k-mrr [Cfg] DUT runs L2BD switching config with ACL with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618892, rx 84376528
tc06-1518b-2t2c-eth-l2bdbasemaclrn-iacl50-stateful-flows10k-mrr [Cfg] DUT runs L2BD switching config with ACL with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc07-9000b-2t2c-eth-l2bdbasemaclrn-iacl50-stateful-flows10k-mrr [Cfg] DUT runs L2BD switching config with ACL with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc08-imix-2t2c-eth-l2bdbasemaclrn-iacl50-stateful-flows10k-mrr [Cfg] DUT runs L2BD switching config with ACL with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722
tc09-64b-4t4c-eth-l2bdbasemaclrn-iacl50-stateful-flows10k-mrr [Cfg] DUT runs L2BD switching config with ACL with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618911, rx 135207851
tc10-1518b-4t4c-eth-l2bdbasemaclrn-iacl50-stateful-flows10k-mrr [Cfg] DUT runs L2BD switching config with ACL with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc11-9000b-4t4c-eth-l2bdbasemaclrn-iacl50-stateful-flows10k-mrr [Cfg] DUT runs L2BD switching config with ACL with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc12-imix-4t4c-eth-l2bdbasemaclrn-iacl50-stateful-flows10k-mrr [Cfg] DUT runs L2BD switching config with ACL with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722

7.2.6.6. 10ge2p1x520-eth-l2bdbasemaclrn-iacl50sl-10kflows-mrr

Raw results L2BD test cases with ACL

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.
  • [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
  • [Ver] TG verification: In MaxReceivedRate tests TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 10k flows per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
  • [Ref] Applicable standard specifications: RFC2544.
Name Documentation Status
tc01-64b-1t1c-eth-l2bdbasemaclrn-iacl50-stateless-flows10k-mrr [Cfg] DUT runs L2BD switching config with ACL with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618893, rx 40981534
tc02-1518b-1t1c-eth-l2bdbasemaclrn-iacl50-stateless-flows10k-mrr [Cfg] DUT runs L2BD switching config with ACL with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc03-9000b-1t1c-eth-l2bdbasemaclrn-iacl50-stateless-flows10k-mrr [Cfg] DUT runs L2BD switching config with ACL with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc04-imix-1t1c-eth-l2bdbasemaclrn-iacl50-stateless-flows10k-mrr [Cfg] DUT runs L2BD switching config with ACL with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 41160816
tc05-64b-2t2c-eth-l2bdbasemaclrn-iacl50-stateless-flows10k-mrr [Cfg] DUT runs L2BD switching config with ACL with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618892, rx 67460369
tc06-1518b-2t2c-eth-l2bdbasemaclrn-iacl50-stateless-flows10k-mrr [Cfg] DUT runs L2BD switching config with ACL with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc07-9000b-2t2c-eth-l2bdbasemaclrn-iacl50-stateless-flows10k-mrr [Cfg] DUT runs L2BD switching config with ACL with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc08-imix-2t2c-eth-l2bdbasemaclrn-iacl50-stateless-flows10k-mrr [Cfg] DUT runs L2BD switching config with ACL with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722
tc09-64b-4t4c-eth-l2bdbasemaclrn-iacl50-stateless-flows10k-mrr [Cfg] DUT runs L2BD switching config with ACL with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618911, rx 110641017
tc10-1518b-4t4c-eth-l2bdbasemaclrn-iacl50-stateless-flows10k-mrr [Cfg] DUT runs L2BD switching config with ACL with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc11-9000b-4t4c-eth-l2bdbasemaclrn-iacl50-stateless-flows10k-mrr [Cfg] DUT runs L2BD switching config with ACL with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc12-imix-4t4c-eth-l2bdbasemaclrn-iacl50-stateless-flows10k-mrr [Cfg] DUT runs L2BD switching config with ACL with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722

7.2.6.7. 10ge2p1x520-eth-l2bdbasemaclrn-mrr

Raw results L2BD test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge- domain and MAC learning enabled. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel.
  • [Ver] TG verification: In MaxReceivedRate tests TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
  • [Ref] Applicable standard specifications: RFC2544.
Name Documentation Status
tc01-64b-1t1c-eth-l2bdbasemaclrn-mrr [Cfg] DUT runs L2BD config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618893, rx 108148522
tc02-1518b-1t1c-eth-l2bdbasemaclrn-mrr [Cfg] DUT runs L2BD config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc03-9000b-1t1c-eth-l2bdbasemaclrn-mrr [Cfg] DUT runs L2BD config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771601, rx 2771601
tc04-imix-1t1c-eth-l2bdbasemaclrn-mrr [Cfg] DUT runs L2BD config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX frames using single trial throughput test. IMIX_v4_1 = (28x64B;16x570B;4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722
tc05-64b-2t2c-eth-l2bdbasemaclrn-mrr [Cfg] DUT runs L2BD config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618892, rx 221604066
tc06-1518b-2t2c-eth-l2bdbasemaclrn-mrr [Cfg] DUT runs L2BD config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254852, rx 16254852
tc07-9000b-2t2c-eth-l2bdbasemaclrn-mrr [Cfg] DUT runs L2BD config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc08-imix-2t2c-eth-l2bdbasemaclrn-mrr [Cfg] DUT runs L2BD config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX frames using single trial throughput test. IMIX_v4_1 = (28x64B;16x570B;4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722
tc09-64b-4t4c-eth-l2bdbasemaclrn-mrr [Cfg] DUT runs L2BD config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618911, rx 237823145
tc10-1518b-4t4c-eth-l2bdbasemaclrn-mrr [Cfg] DUT runs L2BD config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc11-9000b-4t4c-eth-l2bdbasemaclrn-mrr [Cfg] DUT runs L2BD config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc12-imix-4t4c-eth-l2bdbasemaclrn-mrr [Cfg] DUT runs L2BD config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for IMIX frames using single trial throughput test. IMIX_v4_1 = (28x64B;16x570B;4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722

7.2.6.8. 10ge2p1x520-eth-l2bdscale100kmaclrn-mrr

Raw results for L2BD test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge- domain and MAC learning enabled. DUT1 and DUT2 tested with 2p10GE NI X520 Niantic by Intel.
  • [Ver] TG verification: In MaxReceivedRate tests TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 50k flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses ranges are incremented as follows: port01_src ca:fe:00:00:00:00 - port01_src ca:fe:00:00:c3:4f, port01_dst fa:ce:00:00:00:00 - port01_dst fa:ce:00:00:c3:4f, port02_src fa:ce:00:00:00:00 - port02_src fa:ce:00:00:c3:4f, port02_dst ca:fe:00:00:00:00 - port02_dst ca:fe:00:00:c3:4f,
  • [Ref] Applicable standard specifications: RFC2544.
Name Documentation Status
tc01-64b-1t1c-eth-l2bdscale100kmaclrn-mrr [Cfg] DUT runs L2BD switching config with with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618893, rx 76694062
tc02-1518b-1t1c-eth-l2bdscale100kmaclrn-mrr [Cfg] DUT runs L2BD switching config with with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc03-9000b-1t1c-eth-l2bdscale100kmaclrn-mrr [Cfg] DUT runs L2BD switching config with with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771601, rx 2771601
tc04-imix-1t1c-eth-l2bdscale100kmaclrn-mrr [Cfg] DUT runs L2BD switching config with with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722
tc05-64b-2t2c-eth-l2bdscale100kmaclrn-mrr [Cfg] DUT runs L2BD switching config with with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618892, rx 154128647
tc06-1518b-2t2c-eth-l2bdscale100kmaclrn-mrr [Cfg] DUT runs L2BD switching config with with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254852, rx 16254852
tc07-9000b-2t2c-eth-l2bdscale100kmaclrn-mrr [Cfg] DUT runs L2BD switching config with with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc08-imix-2t2c-eth-l2bdscale100kmaclrn-mrr [Cfg] DUT runs L2BD switching config with with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722
tc09-64b-4t4c-eth-l2bdscale100kmaclrn-mrr [Cfg] DUT runs L2BD switching config with with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618911, rx 236808900
tc10-1518b-4t4c-eth-l2bdscale100kmaclrn-mrr [Cfg] DUT runs L2BD switching config with with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc11-9000b-4t4c-eth-l2bdscale100kmaclrn-mrr [Cfg] DUT runs L2BD switching config with with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc12-imix-4t4c-eth-l2bdscale100kmaclrn-mrr [Cfg] DUT runs L2BD switching config with with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722

7.2.6.9. 10ge2p1x520-eth-l2bdscale10kmaclrn-mrr

Raw results for L2BD test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge- domain and MAC learning enabled. DUT1 and DUT2 tested with 2p10GE NI X520 Niantic by Intel.
  • [Ver] TG verification: In MaxReceivedRate tests TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 5k flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses ranges are incremented as follows: port01_src ca:fe:00:00:00:00 - port01_src ca:fe:00:00:13:87, port01_dst fa:ce:00:00:00:00 - port01_dst fa:ce:00:00:13:87, port02_src fa:ce:00:00:00:00 - port02_src fa:ce:00:00:13:87, port02_dst ca:fe:00:00:00:00 - port02_dst ca:fe:00:00:13:87,
  • [Ref] Applicable standard specifications: RFC2544.
Name Documentation Status
tc01-64b-1t1c-eth-l2dbscale10kmaclrn-mrr [Cfg] DUT runs L2BD switching config with with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618893, rx 86170661
tc02-1518b-1t1c-eth-l2dbscale10kmaclrn-mrr [Cfg] DUT runs L2BD switching config with with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc03-9000b-1t1c-eth-l2dbscale10kmaclrn-mrr [Cfg] DUT runs L2BD switching config with with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771601, rx 2771601
tc04-imix-1t1c-eth-l2dbscale10kmaclrn-mrr [Cfg] DUT runs L2BD switching config with with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722
tc05-64b-2t2c-eth-l2dbscale10kmaclrn-mrr [Cfg] DUT runs L2BD switching config with with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618892, rx 174671199
tc06-1518b-2t2c-eth-l2dbscale10kmaclrn-mrr [Cfg] DUT runs L2BD switching config with with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254852, rx 16254852
tc07-9000b-2t2c-eth-l2dbscale10kmaclrn-mrr [Cfg] DUT runs L2BD switching config with with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc08-imix-2t2c-eth-l2dbscale10kmaclrn-mrr [Cfg] DUT runs L2BD switching config with with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722
tc09-64b-4t4c-eth-l2dbscale10kmaclrn-mrr [Cfg] DUT runs L2BD switching config with with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618911, rx 238388062
tc10-1518b-4t4c-eth-l2dbscale10kmaclrn-mrr [Cfg] DUT runs L2BD switching config with with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc11-9000b-4t4c-eth-l2dbscale10kmaclrn-mrr [Cfg] DUT runs L2BD switching config with with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc12-imix-4t4c-eth-l2dbscale10kmaclrn-mrr [Cfg] DUT runs L2BD switching config with with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722

7.2.6.10. 10ge2p1x520-eth-l2bdscale1mmaclrn-mrr

Raw results for L2BD test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge- domain and MAC learning enabled. DUT1 and DUT2 tested with 2p10GE NI X520 Niantic by Intel.
  • [Ver] TG verification: In MaxReceivedRate tests TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 500k flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses ranges are incremented as follows: port01_src ca:fe:00:00:00:00 - port01_src ca:fe:00:07:a1:1f, port01_dst fa:ce:00:00:00:00 - port01_dst fa:ce:00:07:a1:1f, port02_src fa:ce:00:00:00:00 - port02_src fa:ce:00:07:a1:1f, port02_dst ca:fe:00:00:00:00 - port02_dst ca:fe:00:07:a1:1f,
  • [Ref] Applicable standard specifications: RFC2544.
Name Documentation Status
tc01-64b-1t1c-eth-l2bdscale1mmaclrn-mrr [Cfg] DUT runs L2BD switching config with with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618893, rx 71342542
tc02-1518b-1t1c-eth-l2bdscale1mmaclrn-mrr [Cfg] DUT runs L2BD switching config with with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc03-9000b-1t1c-eth-l2bdscale1mmaclrn-mrr [Cfg] DUT runs L2BD switching config with with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771601, rx 2771601
tc04-imix-1t1c-eth-l2bdscale1mmaclrn-mrr [Cfg] DUT runs L2BD switching config with with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722
tc05-64b-2t2c-eth-l2bdscale1mmaclrn-mrr [Cfg] DUT runs L2BD switching config with with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618892, rx 145819705
tc06-1518b-2t2c-eth-l2bdscale1mmaclrn-mrr [Cfg] DUT runs L2BD switching config with with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254852, rx 16254852
tc07-9000b-2t2c-eth-l2bdscale1mmaclrn-mrr [Cfg] DUT runs L2BD switching config with with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc08-9000b-2t2c-eth-l2bdscale1mmaclrn-mrr [Cfg] DUT runs L2BD switching config with with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722
tc09-64b-4t4c-eth-l2bdscale1mmaclrn-mrr [Cfg] DUT runs L2BD switching config with with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618911, rx 235627209
tc10-1518b-4t4c-eth-l2bdscale1mmaclrn-mrr [Cfg] DUT runs L2BD switching config with with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc11-9000b-4t4c-eth-l2bdscale1mmaclrn-mrr [Cfg] DUT runs L2BD switching config with with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc12-imix-4t4c-eth-l2bdscale1mmaclrn-mrr [Cfg] DUT runs L2BD switching config with with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722

7.2.6.11. 10ge2p1x520-eth-l2xcbase-mrr

Raw results L2XC test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 cross connect.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 cross- connect. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel.
  • [Ver] TG verification: In MaxReceivedRate tests TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
  • [Ref] Applicable standard specifications: RFC2544.
Name Documentation Status
tc01-64b-1t1c-eth-l2xcbase-mrr [Cfg] DUT runs L2XC config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618893, rx 136658773
tc02-1518b-1t1c-eth-l2xcbase-mrr [Cfg] DUT runs L2XC config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc03-9000b-1t1c-eth-l2xcbase-mrr [Cfg] DUT runs L2XC config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771601, rx 2771601
tc04-imix-1t1c-eth-l2xcbase-mrr [Cfg] DUT runs L2XC config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX frames using single trial throughput test. IMIX_v4_1 = (28x64B;16x570B;4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722
tc05-64b-2t2c-eth-l2xcbase-mrr [Cfg] DUT runs L2XC config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618892, rx 233747092
tc06-1518b-2t2c-eth-l2xcbase-mrr [Cfg] DUT runs L2XC config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254852, rx 16254852
tc07-9000b-2t2c-eth-l2xcbase-mrr [Cfg] DUT runs L2XC config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc08-imix-2t2c-eth-l2xcbase-mrr [Cfg] DUT runs L2XC config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX frames using single trial throughput test. IMIX_v4_1 = (28x64B;16x570B;4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722
tc09-64b-4t4c-eth-l2xcbase-mrr [Cfg] DUT runs L2XC config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618911, rx 237805433
tc10-1518b-4t4c-eth-l2xcbase-mrr [Cfg] DUT runs L2XC config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc11-9000b-4t4c-eth-l2xcbase-mrr [Cfg] DUT runs L2XC config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc12-imix-4t4c-eth-l2xcbase-mrr [Cfg] DUT runs L2XC config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for IMIX frames using single trial throughput test. IMIX_v4_1 = (28x64B;16x570B;4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722

7.2.6.12. 10ge2p1x710-dot1q-l2bdbasemaclrn-mrr

Raw results L2BD test cases with 802.1q test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4. 802.1q tagging is applied on link between DUT1 and DUT2.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge domain and MAC learning enabled. DUT1 and DUT2 tested with 2p10GE NIC X710 by Intel.
  • [Ver] TG verification: In MaxReceivedRate tests TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
  • [Ref] Applicable standard specifications: RFC2544.
Name Documentation Status
tc01-64b-1t1c-dot1q-l2bdbasemaclrn-mrr [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 284090759, rx 78060740
tc02-1518b-1t1c-dot1q-l2bdbasemaclrn-mrr [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16212694, rx 16212694
tc03-9000b-1t1c-dot1q-l2bdbasemaclrn-mrr [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2770381, rx 2770381
tc04-imix-1t1c-dot1q-l2bdbasemaclrn-mrr [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66166742, rx 66166742
tc05-64b-2t2c-dot1q-l2bdbasemaclrn-mrr [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 284090758, rx 155416581
tc06-1518b-2t2c-dot1q-l2bdbasemaclrn-mrr [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16212692, rx 16212692
tc07-9000b-2t2c-dot1q-l2bdbasemaclrn-mrr [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2770381, rx 2770381
tc08-imix-2t2c-dot1q-l2bdbasemaclrn-mrr [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66166742, rx 66166742
tc09-64b-4t4c-dot1q-l2bdbasemaclrn-mrr [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 284090759, rx 284090016
tc10-1518b-4t4c-dot1q-l2bdbasemaclrn-mrr [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16212693, rx 16212693
tc11-9000b-4t4c-dot1q-l2bdbasemaclrn-mrr [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2770381, rx 2770381
tc12-imix-4t4c-dot1q-l2bdbasemaclrn-mrr [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66166742, rx 66166742

7.2.6.13. 10ge2p1x710-dot1q-l2xcbase-mrr

Raw results L2XC with 802.1q test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 cross connect. 802.1q tagging is applied on link between DUT1 and DUT2.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 cross- connect. DUT1 and DUT2 tested with 2p10GE NIC X710 by Intel.
  • [Ver] TG verification: In MaxReceivedRate tests TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
  • [Ref] Applicable standard specifications: RFC2544.
Name Documentation Status
tc01-64b-1t1c-dot1q-l2xcbase-mrr [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618893, rx 91734199
tc02-1518b-1t1c-dot1q-l2xcbase-mrr [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16214729
tc03-9000b-1t1c-dot1q-l2xcbase-mrr [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771601, rx 2770775
tc04-imix-1t1c-dot1q-l2xcbase-mrr [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66071074
tc05-64b-2t2c-dot1q-l2xcbase-mrr [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618892, rx 182613942
tc06-1518b-2t2c-dot1q-l2xcbase-mrr [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254852, rx 16214726
tc07-9000b-2t2c-dot1q-l2xcbase-mrr [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2770774
tc08-imix-2t2c-dot1q-l2xcbase-mrr [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66146270
tc09-64b-4t4c-dot1q-l2xcbase-mrr [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618911, rx 284098108
tc10-1518b-4t4c-dot1q-l2xcbase-mrr [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16214878
tc11-9000b-4t4c-dot1q-l2xcbase-mrr [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2770818
tc12-imix-4t4c-dot1q-l2xcbase-mrr [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66166591

7.2.6.14. 10ge2p1x710-eth-l2bdbasemaclrn-iacl1sf-10kflows-mrr

Raw results L2BD test cases with ACL

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.
  • [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with 2p10GE NIC X710 by Intel.
  • [Ver] TG verification: In MaxReceivedRate tests TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 10k flows per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
  • [Ref] Applicable standard specifications: RFC2544.
Name Documentation Status
tc01-64b-1t1c-eth-l2bdbasemaclrn-iacl1-stateful-flows10k-mrr [Cfg] DUT runs L2BD switching config with ACL with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618893, rx 46307017
tc02-1518b-1t1c-eth-l2bdbasemaclrn-iacl1-stateful-flows10k-mrr [Cfg] DUT runs L2BD switching config with ACL with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc03-9000b-1t1c-eth-l2bdbasemaclrn-iacl1-stateful-flows10k-mrr [Cfg] DUT runs L2BD switching config with ACL with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771601, rx 2771601
tc04-imix-1t1c-eth-l2bdbasemaclrn-iacl1-stateful-flows10k-mrr [Cfg] DUT runs L2BD switching config with ACL with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 45012718
tc05-64b-2t2c-eth-l2bdbasemaclrn-iacl1-stateful-flows10k-mrr [Cfg] DUT runs L2BD switching config with ACL with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618892, rx 80782113
tc06-1518b-2t2c-eth-l2bdbasemaclrn-iacl1-stateful-flows10k-mrr [Cfg] DUT runs L2BD switching config with ACL with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254852, rx 16254852
tc07-9000b-2t2c-eth-l2bdbasemaclrn-iacl1-stateful-flows10k-mrr [Cfg] DUT runs L2BD switching config with ACL with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc08-imix-2t2c-eth-l2bdbasemaclrn-iacl1-stateful-flows10k-mrr [Cfg] DUT runs L2BD switching config with ACL with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722
tc09-64b-4t4c-eth-l2bdbasemaclrn-iacl1-stateful-flows10k-mrr [Cfg] DUT runs L2BD switching config with ACL with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618911, rx 140440630
tc10-1518b-2t2c-eth-l2bdbasemaclrn-iacl1-stateful-flows10k-mrr [Cfg] DUT runs L2BD switching config with ACL with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc11-9000b-2t2c-eth-l2bdbasemaclrn-iacl1-stateful-flows10k-mrr [Cfg] DUT runs L2BD switching config with ACL with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc12-imix-2t2c-eth-l2bdbasemaclrn-iacl1-stateful-flows10k-mrr [Cfg] DUT runs L2BD switching config with ACL with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722

7.2.6.15. 10ge2p1x710-eth-l2bdbasemaclrn-iacl1sl-10kflows-mrr

Raw results L2BD test cases with ACL

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.
  • [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with 2p10GE NIC X710 by Intel.
  • [Ver] TG verification: In MaxReceivedRate tests TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 10k flows per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
  • [Ref] Applicable standard specifications: RFC2544.
Name Documentation Status
tc01-64b-1t1c-eth-l2bdbasemaclrn-iacl1-stateless-flows10k-mrr [Cfg] DUT runs L2BD switching config with ACL with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618893, rx 40647867
tc02-1518b-1t1c-eth-l2bdbasemaclrn-iacl1-stateless-flows10k-mrr [Cfg] DUT runs L2BD switching config with ACL with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc03-9000b-1t1c-eth-l2bdbasemaclrn-iacl1-stateless-flows10k-mrr [Cfg] DUT runs L2BD switching config with ACL with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771601, rx 2771601
tc04-imix-1t1c-eth-l2bdbasemaclrn-iacl1-stateless-flows10k-mrr [Cfg] DUT runs L2BD switching config with ACL with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 40974534
tc05-64b-2t2c-eth-l2bdbasemaclrn-iacl1-stateless-flows10k-mrr [Cfg] DUT runs L2BD switching config with ACL with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618892, rx 70935944
tc06-1518b-2t2c-eth-l2bdbasemaclrn-iacl1-stateless-flows10k-mrr [Cfg] DUT runs L2BD switching config with ACL with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254852, rx 16254852
tc07-9000b-2t2c-eth-l2bdbasemaclrn-iacl1-stateless-flows10k-mrr [Cfg] DUT runs L2BD switching config with ACL with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc08-imix-2t2c-eth-l2bdbasemaclrn-iacl1-stateless-flows10k-mrr [Cfg] DUT runs L2BD switching config with ACL with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722
tc09-64b-4t4c-eth-l2bdbasemaclrn-iacl1-stateless-flows10k-mrr [Cfg] DUT runs L2BD switching config with ACL with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618911, rx 111090411
tc10-1518b-4t4c-eth-l2bdbasemaclrn-iacl1-stateless-flows10k-mrr [Cfg] DUT runs L2BD switching config with ACL with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc11-9000b-4t4c-eth-l2bdbasemaclrn-iacl1-stateless-flows10k-mrr [Cfg] DUT runs L2BD switching config with ACL with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc12-imix-4t4c-eth-l2bdbasemaclrn-iacl1-stateless-flows10k-mrr [Cfg] DUT runs L2BD switching config with ACL with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722

7.2.6.16. 10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-10kflows-mrr

Raw results L2BD test cases with ACL

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.
  • [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with 2p10GE NIC X710 by Intel.
  • [Ver] TG verification: In MaxReceivedRate tests TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 10k flows per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
  • [Ref] Applicable standard specifications: RFC2544.
Name Documentation Status
tc01-64b-1t1c-eth-l2bdbasemaclrn-iacl50-stateful-flows10k-mrr [Cfg] DUT runs L2BD switching config with ACL with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618893, rx 46429399
tc02-1518b-1t1c-eth-l2bdbasemaclrn-iacl50-stateful-flows10k-mrr [Cfg] DUT runs L2BD switching config with ACL with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc03-9000b-1t1c-eth-l2bdbasemaclrn-iacl50-stateful-flows10k-mrr [Cfg] DUT runs L2BD switching config with ACL with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771601, rx 2771601
tc04-imix-1t1c-eth-l2bdbasemaclrn-iacl50-stateful-flows10k-mrr [Cfg] DUT runs L2BD switching config with ACL with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 44925692
tc05-64b-2t2c-eth-l2bdbasemaclrn-iacl50-stateful-flows10k-mrr [Cfg] DUT runs L2BD switching config with ACL with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618892, rx 85466128
tc06-1518b-2t2c-eth-l2bdbasemaclrn-iacl50-stateful-flows10k-mrr [Cfg] DUT runs L2BD switching config with ACL with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254852, rx 16254852
tc07-9000b-2t2c-eth-l2bdbasemaclrn-iacl50-stateful-flows10k-mrr [Cfg] DUT runs L2BD switching config with ACL with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc08-imix-2t2c-eth-l2bdbasemaclrn-iacl50-stateful-flows10k-mrr [Cfg] DUT runs L2BD switching config with ACL with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722
tc09-64b-4t4c-eth-l2bdbasemaclrn-iacl50-stateful-flows10k-mrr [Cfg] DUT runs L2BD switching config with ACL with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618911, rx 127031559
tc10-1518b-4t4c-eth-l2bdbasemaclrn-iacl50-stateful-flows10k-mrr [Cfg] DUT runs L2BD switching config with ACL with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc11-9000b-4t4c-eth-l2bdbasemaclrn-iacl50-stateful-flows10k-mrr [Cfg] DUT runs L2BD switching config with ACL with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc12-imix-4t4c-eth-l2bdbasemaclrn-iacl50-stateful-flows10k-mrr [Cfg] DUT runs L2BD switching config with ACL with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722

7.2.6.17. 10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-10kflows-mrr

Raw results L2BD test cases with ACL

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4-UDP for L2 switching of IPv4.
  • [Cfg] DUT configuration: DUT1 is configured with L2 bridge domain and MAC learning enabled. DUT2 is configured with L2 cross-connects. Required ACL rules are applied to input paths of both DUT1 intefaces. DUT1 and DUT2 are tested with 2p10GE NIC X710 by Intel.
  • [Ver] TG verification: In MaxReceivedRate tests TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 10k flows per flow-group) with all packets containing Ethernet header, IPv4 header with UDP header and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
  • [Ref] Applicable standard specifications: RFC2544.
Name Documentation Status
tc01-64b-1t1c-eth-l2bdbasemaclrn-iacl50-stateless-flows10k-mrr [Cfg] DUT runs L2BD switching config with ACL with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618893, rx 40526908
tc02-1518b-1t1c-eth-l2bdbasemaclrn-iacl50-stateless-flows10k-mrr [Cfg] DUT runs L2BD switching config with ACL with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc03-9000b-1t1c-eth-l2bdbasemaclrn-iacl50-stateless-flows10k-mrr [Cfg] DUT runs L2BD switching config with ACL with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771601, rx 2771601
tc04-imix-1t1c-eth-l2bdbasemaclrn-iacl50-stateless-flows10k-mrr [Cfg] DUT runs L2BD switching config with ACL with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 40984839
tc05-64b-2t2c-eth-l2bdbasemaclrn-iacl50-stateless-flows10k-mrr [Cfg] DUT runs L2BD switching config with ACL with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618892, rx 72321294
tc06-1518b-2t2c-eth-l2bdbasemaclrn-iacl50-stateless-flows10k-mrr [Cfg] DUT runs L2BD switching config with ACL with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254852, rx 16254852
tc07-9000b-2t2c-eth-l2bdbasemaclrn-iacl50-stateless-flows10k-mrr [Cfg] DUT runs L2BD switching config with ACL with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc08-imix-2t2c-eth-l2bdbasemaclrn-iacl50-stateless-flows10k-mrr [Cfg] DUT runs L2BD switching config with ACL with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722
tc09-64b-4t4c-eth-l2bdbasemaclrn-iacl50-stateless-flows10k-mrr [Cfg] DUT runs L2BD switching config with ACL with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618911, rx 104573151
tc10-1518b-4t4c-eth-l2bdbasemaclrn-iacl50-stateless-flows10k-mrr [Cfg] DUT runs L2BD switching config with ACL with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc11-9000b-4t4c-eth-l2bdbasemaclrn-iacl50-stateless-flows10k-mrr [Cfg] DUT runs L2BD switching config with ACL with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc12-imix-4t4c-eth-l2bdbasemaclrn-iacl50-stateless-flows10k-mrr [Cfg] DUT runs L2BD switching config with ACL with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722

7.2.6.18. 10ge2p1x710-eth-l2bdbasemaclrn-mrr

Raw results L2BD test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge- domain and MAC learning enabled. DUT1 and DUT2 tested with 2p10GE NIC X710 by Intel.
  • [Ver] TG verification: In MaxReceivedRate tests TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
  • [Ref] Applicable standard specifications: RFC2544.
Name Documentation Status
tc01-64b-1t1c-eth-l2bdbasemaclrn-mrr [Cfg] DUT runs L2BD config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618893, rx 107016342
tc02-1518b-1t1c-eth-l2bdbasemaclrn-mrr [Cfg] DUT runs L2BD config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc03-9000b-1t1c-eth-l2bdbasemaclrn-mrr [Cfg] DUT runs L2BD config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771601, rx 2771601
tc04-imix-1t1c-eth-l2bdbasemaclrn-mrr [Cfg] DUT runs L2BD config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722
tc05-64b-2t2c-eth-l2bdbasemaclrn-mrr [Cfg] DUT runs L2BD config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618892, rx 222242848
tc06-1518b-2t2c-eth-l2bdbasemaclrn-mrr [Cfg] DUT runs L2BD config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254852, rx 16254852
tc07-9000b-2t2c-eth-l2bdbasemaclrn-mrr [Cfg] DUT runs L2BD config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc08-imix-2t2c-eth-l2bdbasemaclrn-mrr [Cfg] DUT runs L2BD config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722
tc09-64b-4t4c-eth-l2bdbasemaclrn-mrr [Cfg] DUT runs L2BD config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618911, rx 297617171
tc10-1518b-4t4c-eth-l2bdbasemaclrn-mrr [Cfg] DUT runs L2BD config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc11-9000b-4t4c-eth-l2bdbasemaclrn-mrr [Cfg] DUT runs L2BD config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc12-imix-4t4c-eth-l2bdbasemaclrn-mrr [Cfg] DUT runs L2BD config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722

7.2.6.19. 10ge2p1x710-eth-l2bdscale100kmaclrn-mrr

Raw results for L2BD test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge- domain and MAC learning enabled. DUT1 and DUT2 tested with 2p10GE NI X710 by Intel.
  • [Ver] TG verification: In MaxReceivedRate tests TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 50k flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses ranges are incremented as follows: port01_src ca:fe:00:00:00:00 - port01_src ca:fe:00:00:c3:4f, port01_dst fa:ce:00:00:00:00 - port01_dst fa:ce:00:00:c3:4f, port02_src fa:ce:00:00:00:00 - port02_src fa:ce:00:00:c3:4f, port02_dst ca:fe:00:00:00:00 - port02_dst ca:fe:00:00:c3:4f,
  • [Ref] Applicable standard specifications: RFC2544.
Name Documentation Status
tc01-64b-1t1c-eth-l2bdscale100kmaclrn-mrr [Cfg] DUT runs L2BD switching config with with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618893, rx 74457631
tc02-1518b-1t1c-eth-l2bdscale100kmaclrn-mrr [Cfg] DUT runs L2BD switching config with with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc03-9000b-1t1c-eth-l2bdscale100kmaclrn-mrr [Cfg] DUT runs L2BD switching config with with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771601, rx 2771602
tc04-imix-1t1c-eth-l2bdscale100kmaclrn-mrr [Cfg] DUT runs L2BD switching config with with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874724
tc05-64b-2t2c-eth-l2bdscale100kmaclrn-mrr [Cfg] DUT runs L2BD switching config with with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618892, rx 152348645
tc06-1518b-2t2c-eth-l2bdscale100kmaclrn-mrr [Cfg] DUT runs L2BD switching config with with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254852, rx 16254852
tc07-9000b-2t2c-eth-l2bdscale100kmaclrn-mrr [Cfg] DUT runs L2BD switching config with with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771601
tc08-imix-2t2c-eth-l2bdscale100kmaclrn-mrr [Cfg] DUT runs L2BD switching config with with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874724
tc09-64b-4t4c-eth-l2bdscale100kmaclrn-mrr [Cfg] DUT runs L2BD switching config with with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618911, rx 295990314
tc10-1518b-4t4c-eth-l2bdscale100kmaclrn-mrr [Cfg] DUT runs L2BD switching config with with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc11-9000b-4t4c-eth-l2bdscale100kmaclrn-mrr [Cfg] DUT runs L2BD switching config with with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771601
tc12-imix-4t4c-eth-l2bdscale100kmaclrn-mrr [Cfg] DUT runs L2BD switching config with with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874724

7.2.6.20. 10ge2p1x710-eth-l2bdscale10kmaclrn-mrr

Raw results for L2BD test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge- domain and MAC learning enabled. DUT1 and DUT2 tested with 2p10GE NI X710 by Intel.
  • [Ver] TG verification: In MaxReceivedRate tests TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 5k flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses ranges are incremented as follows: port01_src ca:fe:00:00:00:00 - port01_src ca:fe:00:00:13:87, port01_dst fa:ce:00:00:00:00 - port01_dst fa:ce:00:00:13:87, port02_src fa:ce:00:00:00:00 - port02_src fa:ce:00:00:13:87, port02_dst ca:fe:00:00:00:00 - port02_dst ca:fe:00:00:13:87,
  • [Ref] Applicable standard specifications: RFC2544.
Name Documentation Status
tc01-64b-1t1c-eth-l2dbscale10kmaclrn-mrr [Cfg] DUT runs L2BD switching config with with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618893, rx 84708957
tc02-1518b-1t1c-eth-l2dbscale10kmaclrn-mrr [Cfg] DUT runs L2BD switching config with with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254856
tc03-9000b-1t1c-eth-l2dbscale10kmaclrn-mrr [Cfg] DUT runs L2BD switching config with with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771601, rx 2771601
tc04-imix-1t1c-eth-l2dbscale10kmaclrn-mrr [Cfg] DUT runs L2BD switching config with with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722
tc05-64b-2t2c-eth-l2dbscale10kmaclrn-mrr [Cfg] DUT runs L2BD switching config with with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618892, rx 171796304
tc06-1518b-2t2c-eth-l2dbscale10kmaclrn-mrr [Cfg] DUT runs L2BD switching config with with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254852, rx 16254854
tc07-9000b-2t2c-eth-l2dbscale10kmaclrn-mrr [Cfg] DUT runs L2BD switching config with with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771601
tc08-imix-2t2c-eth-l2dbscale10kmaclrn-mrr [Cfg] DUT runs L2BD switching config with with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722
tc09-64b-4t4c-eth-l2dbscale10kmaclrn-mrr [Cfg] DUT runs L2BD switching config with with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618911, rx 297615626
tc10-1518b-4t4c-eth-l2dbscale10kmaclrn-mrr [Cfg] DUT runs L2BD switching config with with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254855
tc11-9000b-4t4c-eth-l2dbscale10kmaclrn-mrr [Cfg] DUT runs L2BD switching config with with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc12-imix-4t4c-eth-l2dbscale10kmaclrn-mrr [Cfg] DUT runs L2BD switching config with with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722

7.2.6.21. 10ge2p1x710-eth-l2bdscale1mmaclrn-mrr

Raw results for L2BD test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge- domain and MAC learning enabled. DUT1 and DUT2 tested with 2p10GE NI X710 by Intel.
  • [Ver] TG verification: In MaxReceivedRate tests TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 500k flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses ranges are incremented as follows: port01_src ca:fe:00:00:00:00 - port01_src ca:fe:00:07:a1:1f, port01_dst fa:ce:00:00:00:00 - port01_dst fa:ce:00:07:a1:1f, port02_src fa:ce:00:00:00:00 - port02_src fa:ce:00:07:a1:1f, port02_dst ca:fe:00:00:00:00 - port02_dst ca:fe:00:07:a1:1f,
  • [Ref] Applicable standard specifications: RFC2544.
Name Documentation Status
tc01-64b-1t1c-eth-l2bdscale1mmaclrn-mrr [Cfg] DUT runs L2BD switching config with with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618893, rx 71632243
tc02-1518b-1t1c-eth-l2bdscale1mmaclrn-mrr [Cfg] DUT runs L2BD switching config with with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc03-9000b-1t1c-eth-l2bdscale1mmaclrn-mrr [Cfg] DUT runs L2BD switching config with with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771601, rx 2771602
tc04-imix-1t1c-eth-l2bdscale1mmaclrn-mrr [Cfg] DUT runs L2BD switching config with with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66758209
tc05-64b-2t2c-eth-l2bdscale1mmaclrn-mrr [Cfg] DUT runs L2BD switching config with with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618892, rx 148047049
tc06-1518b-2t2c-eth-l2bdscale1mmaclrn-mrr [Cfg] DUT runs L2BD switching config with with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254852, rx 16254852
tc07-9000b-2t2c-eth-l2bdscale1mmaclrn-mrr [Cfg] DUT runs L2BD switching config with with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771601
tc08-9000b-2t2c-eth-l2bdscale1mmaclrn-mrr [Cfg] DUT runs L2BD switching config with with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722
tc09-64b-4t4c-eth-l2bdscale1mmaclrn-mrr [Cfg] DUT runs L2BD switching config with with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618911, rx 293024879
tc10-1518b-4t4c-eth-l2bdscale1mmaclrn-mrr [Cfg] DUT runs L2BD switching config with with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc11-9000b-4t4c-eth-l2bdscale1mmaclrn-mrr [Cfg] DUT runs L2BD switching config with with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771601
tc12-imix-4t4c-eth-l2bdscale1mmaclrn-mrr [Cfg] DUT runs L2BD switching config with with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722

7.2.6.22. 10ge2p1x710-eth-l2xcbase-mrr

Raw results L2XC test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 cross connect.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 cross- connect. DUT1 and DUT2 tested with 2p10GE NIC X710 by Intel.
  • [Ver] TG verification: In MaxReceivedRate tests TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
  • [Ref] Applicable standard specifications: RFC2544.
Name Documentation Status
tc01-64b-1t1c-eth-l2xcbase-mrr [Cfg] DUT runs L2XC config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618893, rx 134822954
tc02-1518b-1t1c-eth-l2xcbase-mrr [Cfg] DUT runs L2XC config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc03-9000b-1t1c-eth-l2xcbase-mrr [Cfg] DUT runs L2XC config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771601, rx 2771601
tc04-imix-1t1c-eth-l2xcbase-mrr [Cfg] DUT runs L2XC config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX frames using single trial throughput test. IMIX_v4_1 = (28x64B;16x570B;4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722
tc05-64b-2t2c-eth-l2xcbase-mrr [Cfg] DUT runs L2XC config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618892, rx 281318823
tc06-1518b-2t2c-eth-l2xcbase-mrr [Cfg] DUT runs L2XC config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254852, rx 16254852
tc07-9000b-2t2c-eth-l2xcbase-mrr [Cfg] DUT runs L2XC config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc08-imix-2t2c-eth-l2xcbase-mrr [Cfg] DUT runs L2XC config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX frames using single trial throughput test. IMIX_v4_1 = (28x64B;16x570B;4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722
tc09-64b-4t4c-eth-l2xcbase-mrr [Cfg] DUT runs L2XC config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618911, rx 297618218
tc10-1518b-4t4c-eth-l2xcbase-mrr [Cfg] DUT runs L2XC config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc11-9000b-4t4c-eth-l2xcbase-mrr [Cfg] DUT runs L2XC config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc12-imix-4t4c-eth-l2xcbase-mrr [Cfg] DUT runs L2XC config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for IMIX frames using single trial throughput test. IMIX_v4_1 = (28x64B;16x570B;4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66874722

7.2.6.23. 40ge2p1xl710-eth-l2bdbasemaclrn-mrr

Raw results L2BD test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge- domain and MAC learning enabled. DUT1 and DUT2 tested with 2p40GE NIC XL710-DA2 by Intel.
  • [Ver] TG verification: In MaxReceivedRate tests TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
  • [Ref] Applicable standard specifications: RFC2544.
Name Documentation Status
tc01-64b-1t1c-eth-l2bdbasemaclrn-mrr [Cfg] DUT runs L2BD switching config with with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 374999814, rx 113704097
tc02-1518b-1t1c-eth-l2bdbasemaclrn-mrr [Cfg] DUT runs L2BD switching config with with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 39824422, rx 39822788
tc03-9000b-1t1c-eth-l2bdbasemaclrn-mrr [Cfg] DUT runs L2BD switching config with with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 6790459, rx 6790459
tc04-imix-1t1c-eth-l2bdbasemaclrn-mrr [Cfg] DUT runs L2BD switching config with with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 163843064, rx 131660735
tc05-64b-2t2c-eth-l2bdbasemaclrn-mrr [Cfg] DUT runs L2BD switching config with with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 374999813, rx 223216552
tc06-1518b-2t2c-eth-l2bdbasemaclrn-mrr [Cfg] DUT runs L2BD switching config with with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 39824422, rx 39823315
tc07-9000b-2t2c-eth-l2bdbasemaclrn-mrr [Cfg] DUT runs L2BD switching config with with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 6790458, rx 6790458
tc08-imix-2t2c-eth-l2bdbasemaclrn-mrr [Cfg] DUT runs L2BD switching config with with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 163843066, rx 163843066
tc09-64b-4t4c-eth-l2bdbasemaclrn-mrr [Cfg] DUT runs L2BD switching config with with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 374999842, rx 374999193
tc10-1518b-4t4c-eth-l2bdbasemaclrn-mrr [Cfg] DUT runs L2BD switching config with with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 39824423, rx 39824423
tc11-9000b-4t4c-eth-l2bdbasemaclrn-mrr [Cfg] DUT runs L2BD switching config with with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 6790458, rx 6790313
tc12-imix-4t4c-eth-l2bdbasemaclrn-mrr [Cfg] DUT runs L2BD switching config with with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
No keyword with name ‘Check RR for l2bdbasemaclrn BW limit’ found. Did you mean:
Check RR For L2bdbasemaclrn

7.2.6.24. 40ge2p1xl710-eth-l2xcbase-mrr

Raw results L2XC test cases

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 cross connect.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 cross- connect. DUT1 and DUT2 tested with 2p40GE NIC XL710 by Intel.
  • [Ver] TG verification: In MaxReceivedRate tests TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
  • [Ref] Applicable standard specifications: RFC2544.
Name Documentation Status
tc01-64b-1t1c-eth-l2xcbase-mrr [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 374999814, rx 144766865
tc02-1518b-1t1c-eth-l2xcbase-mrr [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 39824422, rx 39824422
tc03-9000b-1t1c-eth-l2xcbase-mrr [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 6790459, rx 6790459
tc04-imix-1t1c-eth-l2xcbase-mrr [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B;16x570B;4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 163843064, rx 153131690
tc05-64b-2t2c-eth-l2xcbase-mrr [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 374999813, rx 298104423
tc06-1518b-2t2c-eth-l2xcbase-mrr [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 39824422, rx 39822383
tc07-9000b-2t2c-eth-l2xcbase-mrr [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 6790458, rx 6790458
tc08-imix-2t2c-eth-l2xcbase-mrr [Cfg] DUT runs L2XC switching config with 2 thread, 2 phy core, 1 receive queue per NIC port..
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B;16x570B;4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 163843066, rx 163843066
tc09-64b-4t4c-eth-l2xcbase-mrr [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 374999842, rx 374496034
tc10-1518b-4t4c-eth-l2xcbase-mrr [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 39824423, rx 39824423
tc11-9000b-4t4c-eth-l2xcbase-mrr [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 6790458, rx 6790458
tc12-imix-4t4c-eth-l2xcbase-mrr [Cfg] DUT runs L2XC switching config with 4 thread, 4 phy core, 2 receive queue per NIC port..
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B;16x570B;4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 163843066, rx 163843066

7.2.7. vm vhost

7.2.7.1. 10ge2p1x520-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr

Raw results L2BD test cases with vhost

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4. 802.1q tagging is applied on link between DUT1 and DUT2.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge- domain and MAC learning enabled. Qemu Guest is connected to VPP via vhost-user interfaces. Guest is running DPDK testpmd interconnecting vhost-user interfaces using 5 cores pinned to cpus 5-9 and 2048M memory. Testpmd is using socket-mem=1024M (512x2M hugepages), 5 cores (1 main core and 4 cores dedicated for io), forwarding mode is set to io, rxd/txd=1024, burst=64. DUT1, DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
  • [Ver] TG verification: In MaxReceivedRate test TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
Name Documentation Status
tc01-64b-1t1c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618893, rx 33760607
tc02-1518b-1t1c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254852, rx 10128149
tc03-9000b-1t1c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2098656
tc04-imix-1t1c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 26984835
tc05-64b-2t2c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618911, rx 54794095
tc06-1518b-2t2c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16214729
tc07-9000b-2t2c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2770748
tc08-imix-2t2c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 38192876
tc09-64b-4t4c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618911, rx 66760101
tc10-1518b-4t4c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16214788
tc11-9000b-4t4c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771599, rx 2770731
tc12-imix-4t4c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 55192561

7.2.7.2. 10ge2p1x520-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr

Raw results L2XC test cases with vhost

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 cross connect. 802.1q tagging is applied on link between DUT1 and DUT2.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 cross- connect. Qemu Guest is connected to VPP via vhost-user interfaces. Guest is running DPDK testpmd interconnecting vhost-user interfaces using 5 cores pinned to cpus 5-9 and 2048M memory. Testpmd is using socket-mem=1024M (512x2M hugepages), 5 cores (1 main core and 4 cores dedicated for io), forwarding mode is set to io, rxd/txd=1024, burst=64. DUT1, DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
  • [Ver] TG verification: In MaxReceivedRate test TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
Name Documentation Status
tc01-64b-1t1c-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618893, rx 38705191
tc02-1518b-1t1c-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254852, rx 10627507
tc03-9000b-1t1c-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2158969
tc04-imix-1t1c-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 29252140
tc05-64b-2t2c-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618911, rx 61491180
tc06-1518b-2t2c-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16214792
tc07-9000b-2t2c-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2770728
tc08-imix-2t2c-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 53734801
tc09-64b-4t4c-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618911, rx 76195873
tc10-1518b-4t4c-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16214784
tc11-9000b-4t4c-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771599, rx 2770735
tc12-imix-4t4c-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 57251558

7.2.7.3. 10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr

Raw results L2BD test cases with vhost

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge- domain and MAC learning enabled. Qemu Guest is connected to VPP via vhost-user interfaces. Guest is running DPDK testpmd interconnecting vhost-user interfaces using 5 cores pinned to cpus 5-9 and 2048M memory. Testpmd is using socket-mem=1024M (512x2M hugepages), 5 cores (1 main core and 4 cores dedicated for io), forwarding mode is set to io, rxd/txd=1024, burst=64. Scheduler policy is set to SCHED_RR with priority 1 for all Qemu CPUs. DUT1, DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
  • [Ver] TG verification: In MaxReceivedRate test TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
Name Documentation Status
tc01-64b-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618893, rx 38493230
tc02-1518b-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254852, rx 11810142
tc03-9000b-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2344456
tc04-imix-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 27597107
tc05-64b-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618911, rx 56993383
tc06-1518b-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc07-9000b-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc08-imix-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 47808121
tc09-64b-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618911, rx 68308833
tc10-1518b-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc10-9000b-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc12-imix-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66608887

7.2.7.4. 10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-mrr

Raw results L2BD test cases with vhost

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge- domain and MAC learning enabled. Qemu Guest is connected to VPP via vhost-user interfaces. Guest is running DPDK testpmd interconnecting vhost-user interfaces using 5 cores pinned to cpus 5-9 and 2048M memory. Testpmd is using socket-mem=1024M (512x2M hugepages), 5 cores (1 main core and 4 cores dedicated for io), forwarding mode is set to io, rxd/txd=256, burst=64. Scheduler policy is set to SCHED_RR with priority 1 for all Qemu CPUs. DUT1, DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
  • [Ver] TG verification: In MaxReceivedRate test TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
Name Documentation Status
tc01-64b-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-mrr [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618893, rx 38134627
tc02-1518b-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254852, rx 16251271
tc03-9000b-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2438129
tc04-imix-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-mrr [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 30686167
tc05-64b-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-mrr [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618911, rx 66116100
tc06-1518b-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-mrr [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254513
tc07-9000b-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-mrr [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771540
tc08-imix-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-mrr [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 52440057
tc09-64b-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-mrr [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618911, rx 63981085
tc10-1518b-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-mrr [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254590
tc11-9000b-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-mrr [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771546
tc12-imix-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-mrr [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66866022

7.2.7.5. 10ge2p1x520-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr

Raw results L2BD test cases with vhost

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge- domains and MAC learning enabled. Qemu Guests are connected to VPP via vhost-user interfaces. Guests are running DPDK testpmd interconnecting vhost-user interfaces using 5 cores pinned to cpus 6-10 and 11-15 and 2048M memory. Testpmd is using socket-mem=1024M (512x2M hugepages), 5 cores (1 main core and 4 cores dedicated for io), forwarding mode is set to io, rxd/txd=1024, burst=64. DUT1, DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
  • [Ver] TG verification: In MaxReceivedRate test TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
Name Documentation Status
tc01-64b-1t1c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618892, rx 23102799
tc02-1518b-1t1c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 5715669
tc03-9000b-1t1c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 1150889
tc04-imix-1t1c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 15079530
tc05-64b-2t2c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618911, rx 44665317
tc06-1518b-2t2c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 10722762
tc07-9000b-2t2c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771599, rx 2300170
tc08-imix-2t2c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 28888571
tc09-64b-4t4c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618910, rx 63056457
tc10-1518b-4t4c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254852, rx 16254852
tc11-9000b-4t4c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771599, rx 2771599
tc12-imix-4t4c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 44616908

7.2.7.6. 10ge2p1x520-eth-l2xcbase-eth-2vhostvr1024-1vm-mrr

Raw results L2XC test cases with vhost

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4. 802.1q tagging is applied on link between DUT1 and DUT2.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 cross- connect. Qemu Guest is connected to VPP via vhost-user interfaces. Guest is running DPDK testpmd interconnecting vhost-user interfaces using 5 cores pinned to cpus 5-9 and 2048M memory. Testpmd is using socket-mem=1024M (512x2M hugepages), 5 cores (1 main core and 4 cores dedicated for io), forwarding mode is set to io, rxd/txd=1024, burst=64. DUT1, DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
  • [Ver] TG verification: In MaxReceivedRate test TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
Name Documentation Status
tc01-64b-1t1c-eth-l2xcbase-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618893, rx 45293284
tc02-1518b-1t1c-eth-l2xcbase-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254852, rx 11267996
tc03-9000b-1t1c-eth-l2xcbase-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2401919
tc04-imix-1t1c-eth-l2xcbase-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 29311403
tc05-64b-2t2c-eth-l2xcbase-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618911, rx 79142415
tc06-1518b-2t2c-eth-l2xcbase-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc07-9000b-2t2c-eth-l2xcbase-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc08-imix-2t2c-eth-l2xcbase-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 53021905
tc09-64b-4t4c-eth-l2xcbase-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618911, rx 89033507
tc10-1518b-4t4c-eth-l2xcbase-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc11-9000b-4t4c-eth-l2xcbase-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc12-imix-4t4c-eth-l2xcbase-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66675928

7.2.7.7. 10ge2p1x520-eth-l2xcbase-eth-2vhostvr256-1vm-mrr

Raw results L2XC test cases with vhost

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4. 802.1q tagging is applied on link between DUT1 and DUT2.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 cross- connect. Qemu Guest is connected to VPP via vhost-user interfaces. Guest is running DPDK testpmd interconnecting vhost-user interfaces using 5 cores pinned to cpus 5-9 and 2048M memory. Testpmd is using socket-mem=1024M (512x2M hugepages), 5 cores (1 main core and 4 cores dedicated for io), forwarding mode is set to io, rxd/txd=256, burst=64. DUT1, DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
  • [Ver] TG verification: In MaxReceivedRate test TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
Name Documentation Status
tc01-64b-1t1c-eth-l2xcbase-eth-2vhostvr256-1vm-mrr [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618893, rx 45087828
tc02-1518b-1t1c-eth-l2xcbase-eth-2vhostvr256-1vm-mrr [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254852, rx 16254197
tc03-9000b-1t1c-eth-l2xcbase-eth-2vhostvr256-1vm-mrr [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2503552
tc04-imix-1t1c-eth-l2xcbase-eth-2vhostvr256-1vm-mrr [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 34982653
tc05-64b-2t2c-eth-l2xcbase-eth-2vhostvr256-1vm-mrr [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618911, rx 73196835
tc06-1518b-2t2c-eth-l2xcbase-eth-2vhostvr256-1vm-mrr [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254721
tc07-9000b-2t2c-eth-l2xcbase-eth-2vhostvr256-1vm-mrr [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771561
tc08-imix-2t2c-eth-l2xcbase-eth-2vhostvr256-1vm-mrr [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 61643401
tc09-64b-4t4c-eth-l2xcbase-eth-2vhostvr256-1vm-mrr [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618911, rx 80822193
tc10-1518b-4t4c-eth-l2xcbase-eth-2vhostvr256-1vm-mrr [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254582
tc11-9000b-4t4c-eth-l2xcbase-eth-2vhostvr256-1vm-mrr [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771510
tc12-imix-4t4c-eth-l2xcbase-eth-2vhostvr256-1vm-mrr [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66869145

7.2.7.8. 10ge2p1x520-eth-l2xcbase-eth-4vhostvr1024-2vm-mrr

Raw results L2XC test cases with vhost

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4. 802.1q tagging is applied on link between DUT1 and DUT2.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 cross- connects. Qemu Guests are connected to VPP via vhost-user interfaces. Guests are running DPDK testpmd interconnecting vhost-user interfaces using 5 cores pinned to cpus 6-10 and 11-15 and 2048M memory. Testpmd is using socket-mem=1024M (512x2M hugepages), 5 cores (1 main core and 4 cores dedicated for io), forwarding mode is set to io, rxd/txd=1024, burst=64. DUT1, DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
  • [Ver] TG verification: In MaxReceivedRate test TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
Name Documentation Status
tc01-64b-1t1c-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc-mrr [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618892, rx 26011153
tc02-1518b-1t1c-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc-mrr [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 5896255
tc03-9000b-1t1c-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc-mrr [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 1165764
tc04-imix-1t1c-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc-mrr [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 16645663
tc05-64b-2t2c-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc-mrr [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618911, rx 47560417
tc06-1518b-2t2c-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc-mrr [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 11355617
tc07-9000b-2t2c-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc-mrr [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771599, rx 288486
tc08-imix-2t2c-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc-mrr [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 32151766
tc09-64b-4t4c-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc-mrr [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618910, rx 75032203
tc10-1518b-4t4c-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc-mrr [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254852, rx 16254852
tc11-9000b-4t4c-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc-mrr [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771599, rx 2771599
tc12-imix-4t4c-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc-mrr [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 50205155

7.2.7.9. 10ge2p1x520-ethip4-ip4base-eth-2vhostvr1024-1vm-mrr

Raw results IPv4 test cases with vhost

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4 for IPv4 routing.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing and two static IPv4 /24 route entries. Qemu Guest is connected to VPP via vhost-user interfaces. Guest is running DPDK testpmd interconnecting vhost-user interfaces using 5 cores pinned to cpus 5-9 and 2048M memory. Testpmd is using socket-mem=1024M (512x2M hugepages), 5 cores (1 main core and 4 cores dedicated for io), forwarding mode is set to mac, rxd/txd=1024, burst=64. DUT1, DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
  • [Ver] TG verification: In MaxReceivedRate test TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
Name Documentation Status
tc01-64b-1t1c-ethip4-ip4base-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618893, rx 37758247
tc02-1518b-1t1c-ethip4-ip4base-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254852, rx 10711904
tc03-9000b-1t1c-ethip4-ip4base-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2320128
tc04-imix-1t1c-ethip4-ip4base-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 28313566
tc05-64b-2t2c-ethip4-ip4base-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618911, rx 68660500
tc06-1518b-2t2c-ethip4-ip4base-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc07-9000b-2t2c-ethip4-ip4base-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc08-imix-2t2c-ethip4-ip4base-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 47272677
tc09-64b-4t4c-ethip4-ip4base-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618911, rx 78407952
tc10-1518b-4t4c-ethip4-ip4base-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254852, rx 16254852
tc11-9000b-4t4c-ethip4-ip4base-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771599, rx 2771599
tc12-imix-4t4c-ethip4-ip4base-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66396304

7.2.7.10. 10ge2p1x520-ethip4-ip4base-eth-2vhostvr256-1vm-mrr

Raw results IPv4 test cases with vhost

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4 for IPv4 routing.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing and two static IPv4 /24 route entries. Qemu Guest is connected to VPP via vhost-user interfaces. Guest is running DPDK testpmd interconnecting vhost-user interfaces using 5 cores pinned to cpus 5-9 and 2048M memory. Testpmd is using socket-mem=1024M (512x2M hugepages), 5 cores (1 main core and 4 cores dedicated for io), forwarding mode is set to mac, rxd/txd=256, burst=64. DUT1, DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
  • [Ver] TG verification: In MaxReceivedRate test TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
Name Documentation Status
tc01-64b-1t1c-ethip4-ip4base-eth-2vhostvr256-1vm-mrr [Cfg] DUT runs IP4 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618893, rx 37102885
tc02-1518b-1t1c-ethip4-ip4base-eth-2vhostvr256-1vm [Cfg] DUT runs IP4 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254852, rx 16243545
tc03-9000b-1t1c-ethip4-ip4base-eth-2vhostvr256-1vm [Cfg] DUT runs IP4 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2431878
tc04-imix-1t1c-ethip4-ip4base-eth-2vhostvr256-1vm-mrr [Cfg] DUT runs IP4 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 30175963
tc05-64b-2t2c-ethip4-ip4base-eth-2vhostvr256-1vm-mrr [Cfg] DUT runs IP4 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618911, rx 66814951
tc06-1518b-2t2c-ethip4-ip4base-eth-2vhostvr256-1vm-mrr [Cfg] DUT runs IP4 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254719
tc07-9000b-2t2c-ethip4-ip4base-eth-2vhostvr256-1vm-mrr [Cfg] DUT runs IP4 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771541
tc08-imix-2t2c-ethip4-ip4base-eth-2vhostvr256-1vm-mrr [Cfg] DUT runs IP4 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 52573845
tc09-64b-4t4c-ethip4-ip4base-eth-2vhostvr256-1vm-mrr [Cfg] DUT runs IP4 routing config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618910, rx 70485504
tc10-1518b-4t4c-ethip4-ip4base-eth-2vhostvr256-1vm-mrr [Cfg] DUT runs IP4 routing config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254852, rx 16254734
tc11-9000b-4t4c-ethip4-ip4base-eth-2vhostvr256-1vm-mrr [Cfg] DUT runs IP4 routing config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771599, rx 2771560
tc12-imix-4t4c-ethip4-ip4base-eth-2vhostvr256-1vm-mrr [Cfg] DUT runs IP4 routing config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66559285

7.2.7.11. 10ge2p1x520-ethip4-ip4base-eth-4vhostvr1024-2vm-mrr

Raw results IPv4 test cases with vhost

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4 for IPv4 routing.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing and two static IPv4 /24 route entries. Qemu Guests are connected to VPP via vhost-user interfaces. Guests are running DPDK testpmd interconnectingvhost-user interfaces using 5 cores pinned to cpus 6-10 and 11-15 and 2048M memory. Testpmd is using socket-mem=1024M (512x2M hugepages), 5 cores (1 main core and 4 cores dedicated for io), forwarding mode is set to io, rxd/txd=1024, burst=64. DUT1, DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
  • [Ver] TG verification: In MaxReceivedRate test TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
Name Documentation Status
tc01-64b-1t1c-ethip4-ip4base-eth-4vhostvr1024-2vm-mrr [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618892, rx 20580591
tc02-1518b-1t1c-ethip4-ip4base-eth-4vhostvr1024-2vm-mrr [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 5610888
tc03-9000b-1t1c-ethip4-ip4base-eth-4vhostvr1024-2vm-mrr [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 1144623
tc04-imix-1t1c-ethip4-ip4base-eth-4vhostvr1024-2vm-mrr [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 14526241
tc05-64b-2t2c-ethip4-ip4base-eth-4vhostvr1024-2vm-mrr [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618911, rx 39815221
tc06-1518b-2t2c-ethip4-ip4base-eth-4vhostvr1024-2vm-mrr [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 10661587
tc07-9000b-2t2c-ethip4-ip4base-eth-4vhostvr1024-2vm-mrr [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771599, rx 1282363
tc08-imix-2t2c-ethip4-ip4base-eth-4vhostvr1024-2vm-mrr [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 28410832
tc09-64b-4t4c-ethip4-ip4base-eth-4vhostvr1024-2vm-mrr [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618910, rx 63569950
tc10-1518b-4t4c-ethip4-ip4base-eth-4vhostvr1024-2vm-mrr [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254852, rx 16254852
tc11-9000b-4t4c-ethip4-ip4base-eth-4vhostvr1024-2vm-mrr [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771599, rx 2771599
tc12-imix-4t4c-ethip4-ip4base-eth-4vhostvr1024-2vm-mrr [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 44599827

7.2.7.12. 10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr

Raw results L2BD test cases with VXLANoIPv4 and vhost

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4. Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUT1 and DUT2.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge- domain and MAC learning enabled. Qemu Guest is connected to VPP via vhost-user interfaces. Guest is running DPDK testpmd interconnecting vhost-user interfaces using 5 cores pinned to cpus 5-9 and 2048M memory. Testpmd is using socket-mem=1024M (512x2M hugepages), 5 cores (1 main core and 4 cores dedicated for io), forwarding mode is set to io, rxd/txd=1024, burst=64. DUT1, DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.
  • [Ver] TG verification: In MaxReceivedRate test TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
  • [Ref] Applicable standard specifications: RFC7348.
Name Documentation Status
tc01-64b-1t1c-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 186567068, rx 30491415
tc02-1518b-1t1c-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 15743053, rx 10363802
tc03-9000b-1t1c-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2756320, rx 2001701
tc04-imix-1t1c-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 58985442, rx 24923745
tc05-64b-2t2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 186567076, rx 48345062
tc06-1518b-2t2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 15743055, rx 15743055
tc07-9000b-2t2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2756321, rx 2756321
tc08-imix-2t2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 58985442, rx 35236224
tc09-64b-4t4c-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 186567062, rx 61185664
tc10-1518b-4t4c-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 15743055, rx 15743055
tc11-9000b-4t4c-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2756320, rx 2756320
tc12-imix-4t4c-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 58985442, rx 52698124

7.2.7.13. 10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr

Raw results L2BD test cases with vhost

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4. 802.1q tagging is applied on link between DUT1 and DUT2.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge- domain and MAC learning enabled. Qemu Guest is connected to VPP via vhost-user interfaces. Guest is running DPDK testpmd interconnecting vhost-user interfaces using 5 cores pinned to cpus 5-9 and 2048M memory. Testpmd is using socket-mem=1024M (512x2M hugepages), 5 cores (1 main core and 4 cores dedicated for io), forwarding mode is set to io, rxd/txd=1024, burst=64. DUT1, DUT2 are tested with 2p10GE NIC X710 by Intel.
  • [Ver] TG verification: In MaxReceivedRate test TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
Name Documentation Status
tc01-64b-1t1c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618893, rx 33770193
tc02-1518b-1t1c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254852, rx 10189566
tc03-9000b-1t1c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2099067
tc04-imix-1t1c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 26094957
tc05-64b-2t2c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618911, rx 61061123
tc06-1518b-2t2c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16214913
tc07-9000b-2t2c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2770772
tc08-imix-2t2c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 48740128
tc09-64b-4t4c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618911, rx 61224457
tc10-1518b-4t4c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16214917
tc11-9000b-4t4c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771599, rx 2770709
tc12-imix-4t4c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 58675279

7.2.7.14. 10ge2p1x710-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr

Raw results L2XC test cases with vhost

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 cross connect. 802.1q tagging is applied on link between DUT1 and DUT2.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 cross- connect. Qemu Guest is connected to VPP via vhost-user interfaces. Guest is running DPDK testpmd interconnecting vhost-user interfaces using 5 cores pinned to cpus 5-9 and 2048M memory. Testpmd is using socket-mem=1024M (512x2M hugepages), 5 cores (1 main core and 4 cores dedicated for io), forwarding mode is set to io, rxd/txd=1024, burst=64. DUT1, DUT2 are tested with 2p10GE NIC X710 by Intel.
  • [Ver] TG verification: In MaxReceivedRate test TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
Name Documentation Status
tc01-64b-1t1c-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618893, rx 38571725
tc02-1518b-1t1c-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254852, rx 10623132
tc03-9000b-1t1c-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2129821
tc04-imix-1t1c-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 26297571
tc05-64b-2t2c-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618911, rx 61008614
tc06-1518b-2t2c-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16214902
tc07-9000b-2t2c-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2770762
tc08-imix-2t2c-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 40896866
tc09-64b-4t4c-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618911, rx 75598540
tc10-1518b-4t4c-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16214832
tc11-9000b-4t4c-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2770712
tc12-imix-4t4c-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 57749613

7.2.7.15. 10ge2p1x710-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-mrr

Raw results L2BD test cases with vhost

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge- domain and MAC learning enabled. Qemu Guest is connected to VPP via vhost-user interfaces. Guest is running DPDK testpmd interconnecting vhost-user interfaces using 5 cores pinned to cpus 5-9 and 2048M memory. Testpmd is using socket-mem=1024M (512x2M hugepages), 5 cores (1 main core and 4 cores dedicated for io), forwarding mode is set to io, rxd/txd=256, burst=64. Scheduler policy is set to SCHED_RR with priority 1 for all Qemu CPUs. DUT1, DUT2 are tested with 2p10GE NIC X710 by Intel.
  • [Ver] TG verification: In MaxReceivedRate test TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
Name Documentation Status
tc01-64b-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-mrr [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618893, rx 38227192
tc02-1518b-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254852, rx 16236460
tc03-9000b-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2422693
tc04-imix-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-mrr [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 30547874
tc05-64b-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-mrr [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618911, rx 66397367
tc06-1518b-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-mrr [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254614
tc07-9000b-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-mrr [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771579
tc08-imix-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-mrr [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 53729048
tc09-64b-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-mrr [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618911, rx 68832257
tc10-1518b-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-mrr [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254618
tc11-9000b-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-mrr [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771531
tc12-imix-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-mrr [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66861492

7.2.7.16. 10ge2p1x710-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr

Raw results L2BD test cases with vhost

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge- domains and MAC learning enabled. Qemu Guests are connected to VPP via vhost-user interfaces. Guests are running DPDK testpmd interconnecting vhost-user interfaces using 5 cores pinned to cpus 6-10 and 11-15 and 2048M memory. Testpmd is using socket-mem=1024M (512x2M hugepages), 5 cores (1 main core and 4 cores dedicated for io), forwarding mode is set to io, rxd/txd=1024, burst=64. DUT1, DUT2 are tested with 2p10GE NIC X710 by Intel.
  • [Ver] TG verification: In MaxReceivedRate test TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
Name Documentation Status
tc01-64b-1t1c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618892, rx 22119983
tc02-1518b-1t1c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 5713547
tc03-9000b-1t1c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 1142182
tc04-imix-1t1c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 14806111
tc05-64b-2t2c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618911, rx 41448187
tc06-1518b-2t2c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 10960039
tc07-9000b-2t2c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771599, rx 1236936
tc08-imix-2t2c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 27802909
tc09-64b-4t4c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618910, rx 63709249
tc10-1518b-4t4c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254852, rx 16254852
tc11-9000b-4t4c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771599, rx 2771599
tc12-imix-4t4c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 44901012

7.2.7.17. 10ge2p1x710-eth-l2xcbase-eth-2vhostvr1024-1vm-mrr

Raw results L2XC test cases with vhost

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4. 802.1q tagging is applied on link between DUT1 and DUT2.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 cross- connect. Qemu Guest is connected to VPP via vhost-user interfaces. Guest is running DPDK testpmd interconnecting vhost-user interfaces using 5 cores pinned to cpus 5-9 and 2048M memory. Testpmd is using socket-mem=1024M (512x2M hugepages), 5 cores (1 main core and 4 cores dedicated for io), forwarding mode is set to io, rxd/txd=1024, burst=64. DUT1, DUT2 are tested with 2p10GE NIC X710 by Intel.
  • [Ver] TG verification: In MaxReceivedRate test TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
Name Documentation Status
tc01-64b-1t1c-eth-l2xcbase-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618893, rx 45275566
tc02-1518b-1t1c-eth-l2xcbase-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254852, rx 11348104
tc03-9000b-1t1c-eth-l2xcbase-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2379487
tc04-imix-1t1c-eth-l2xcbase-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 28361311
tc05-64b-2t2c-eth-l2xcbase-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618911, rx 77091126
tc06-1518b-2t2c-eth-l2xcbase-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc07-9000b-2t2c-eth-l2xcbase-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc08-imix-2t2c-eth-l2xcbase-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 52119900
tc09-64b-4t4c-eth-l2xcbase-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618911, rx 84409297
tc10-1518b-4t4c-eth-l2xcbase-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc11-9000b-4t4c-eth-l2xcbase-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc12-imix-4t4c-eth-l2xcbase-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66392975

7.2.7.18. 10ge2p1x710-eth-l2xcbase-eth-2vhostvr256-1vm-mrr

Raw results L2XC test cases with vhost

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4. 802.1q tagging is applied on link between DUT1 and DUT2.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 cross- connect. Qemu Guest is connected to VPP via vhost-user interfaces. Guest is running DPDK testpmd interconnecting vhost-user interfaces using 5 cores pinned to cpus 5-9 and 2048M memory. Testpmd is using socket-mem=1024M (512x2M hugepages), 5 cores (1 main core and 4 cores dedicated for io), forwarding mode is set to io, rxd/txd=256, burst=64. DUT1, DUT2 are tested with 2p10GE NIC X710 by Intel.
  • [Ver] TG verification: In MaxReceivedRate test TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
Name Documentation Status
tc01-64b-1t1c-eth-l2xcbase-eth-2vhostvr256-1vm-mrr [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618893, rx 44743642
tc02-1518b-1t1c-eth-l2xcbase-eth-2vhostvr256-1vm-mrr [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254852, rx 16252732
tc03-9000b-1t1c-eth-l2xcbase-eth-2vhostvr256-1vm-mrr [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2476900
tc04-imix-1t1c-eth-l2xcbase-eth-2vhostvr256-1vm-mrr [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 34756416
tc05-64b-2t2c-eth-l2xcbase-eth-2vhostvr256-1vm-mrr [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618911, rx 69362250
tc06-1518b-2t2c-eth-l2xcbase-eth-2vhostvr256-1vm-mrr [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254646
tc07-9000b-2t2c-eth-l2xcbase-eth-2vhostvr256-1vm-mrr [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771554
tc08-imix-2t2c-eth-l2xcbase-eth-2vhostvr256-1vm-mrr [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 58666532
tc09-64b-4t4c-eth-l2xcbase-eth-2vhostvr256-1vm-mrr [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618911, rx 77750839
tc10-1518b-4t4c-eth-l2xcbase-eth-2vhostvr256-1vm-mrr [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254638
tc11-9000b-4t4c-eth-l2xcbase-eth-2vhostvr256-1vm-mrr [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771571
tc12-imix-4t4c-eth-l2xcbase-eth-2vhostvr256-1vm-mrr [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66868687

7.2.7.19. 10ge2p1x710-eth-l2xcbase-eth-4vhostvr1024-2vm-mrr

Raw results L2XC test cases with vhost

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4. 802.1q tagging is applied on link between DUT1 and DUT2.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 cross- connects. Qemu Guests are connected to VPP via vhost-user interfaces. Guests are running DPDK testpmd interconnecting vhost-user interfaces using 5 cores pinned to cpus 6-10 and 11-15 and 2048M memory. Testpmd is using socket-mem=1024M (512x2M hugepages), 5 cores (1 main core and 4 cores dedicated for io), forwarding mode is set to io, rxd/txd=1024, burst=64. DUT1, DUT2 are tested with 2p10GE NIC X710 by Intel.
  • [Ver] TG verification: In MaxReceivedRate test TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
Name Documentation Status
tc01-64b-1t1c-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc-mrr [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618892, rx 26184960
tc02-1518b-1t1c-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc-mrr [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 5893047
tc03-9000b-1t1c-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc-mrr [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 1150878
tc04-imix-1t1c-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc-mrr [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 16429927
tc05-64b-2t2c-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc-mrr [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618911, rx 47185206
tc06-1518b-2t2c-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc-mrr [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 11050197
tc07-9000b-2t2c-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc-mrr [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771599, rx 2307545
tc08-imix-2t2c-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc-mrr [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 30630565
tc09-64b-4t4c-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc-mrr [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618910, rx 73802878
tc10-1518b-4t4c-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc-mrr [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254852, rx 16254852
tc11-9000b-4t4c-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc-mrr [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771599, rx 2771599
tc12-imix-4t4c-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc-mrr [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 52675690

7.2.7.20. 10ge2p1x710-ethip4-ip4base-eth-2vhostvr1024-1vm-mrr

Raw results IPv4 test cases with vhost

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4 for IPv4 routing.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing and two static IPv4 /24 route entries. Qemu Guest is connected to VPP via vhost-user interfaces. Guest is running DPDK testpmd interconnecting vhost-user interfaces using 5 cores pinned to cpus 5-9 and 2048M memory. Testpmd is using socket-mem=1024M (512x2M hugepages), 5 cores (1 main core and 4 cores dedicated for io), forwarding mode is set to mac, rxd/txd=1024, burst=64. DUT1, DUT2 are tested with 2p10GE NIC X710 by Intel.
  • [Ver] TG verification: In MaxReceivedRate test TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
Name Documentation Status
tc01-64b-1t1c-ethip4-ip4base-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618893, rx 37137903
tc02-1518b-1t1c-ethip4-ip4base-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254852, rx 10914597
tc03-9000b-1t1c-ethip4-ip4base-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2329896
tc04-imix-1t1c-ethip4-ip4base-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 25307933
tc05-64b-2t2c-ethip4-ip4base-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618911, rx 66482790
tc06-1518b-2t2c-ethip4-ip4base-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc07-9000b-2t2c-ethip4-ip4base-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc08-imix-2t2c-ethip4-ip4base-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 54180604
tc09-64b-4t4c-ethip4-ip4base-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618911, rx 67473722
tc10-1518b-4t4c-ethip4-ip4base-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc11-9000b-4t4c-ethip4-ip4base-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771599, rx 2771599
tc12-imix-4t4c-ethip4-ip4base-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66283685

7.2.7.21. 10ge2p1x710-ethip4-ip4base-eth-2vhostvr256-1vm-mrr

Raw results IPv4 test cases with vhost

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4 for IPv4 routing.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing and two static IPv4 /24 route entries. Qemu Guest is connected to VPP via vhost-user interfaces. Guest is running DPDK testpmd interconnecting vhost-user interfaces using 5 cores pinned to cpus 5-9 and 2048M memory. Testpmd is using socket-mem=1024M (512x2M hugepages), 5 cores (1 main core and 4 cores dedicated for io), forwarding mode is set to mac, rxd/txd=256, burst=64. DUT1, DUT2 are tested with 2p10GE NIC X710 by Intel.
  • [Ver] TG verification: In MaxReceivedRate test TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
Name Documentation Status
tc01-64b-1t1c-ethip4-ip4base-eth-2vhostvr256-1vm-mrr [Cfg] DUT runs IP4 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618893, rx 37048807
tc02-1518b-1t1c-ethip4-ip4base-eth-2vhostvr256-1vm [Cfg] DUT runs IP4 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254852, rx 16234112
tc03-9000b-1t1c-ethip4-ip4base-eth-2vhostvr256-1vm [Cfg] DUT runs IP4 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2416803
tc04-imix-1t1c-ethip4-ip4base-eth-2vhostvr256-1vm-mrr [Cfg] DUT runs IP4 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 29894648
tc05-64b-2t2c-ethip4-ip4base-eth-2vhostvr256-1vm-mrr [Cfg] DUT runs IP4 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618911, rx 65697362
tc06-1518b-2t2c-ethip4-ip4base-eth-2vhostvr256-1vm-mrr [Cfg] DUT runs IP4 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254570
tc07-9000b-2t2c-ethip4-ip4base-eth-2vhostvr256-1vm-mrr [Cfg] DUT runs IP4 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771542
tc08-imix-2t2c-ethip4-ip4base-eth-2vhostvr256-1vm-mrr [Cfg] DUT runs IP4 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 52238186
tc09-64b-4t4c-ethip4-ip4base-eth-2vhostvr256-1vm-mrr [Cfg] DUT runs IP4 routing config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618911, rx 68869114
tc10-1518b-4t4c-ethip4-ip4base-eth-2vhostvr256-1vm-mrr [Cfg] DUT runs IP4 routing config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254431
tc11-9000b-4t4c-ethip4-ip4base-eth-2vhostvr256-1vm-mrr [Cfg] DUT runs IP4 routing config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771599, rx 2771527
tc12-imix-4t4c-ethip4-ip4base-eth-2vhostvr256-1vm-mrr [Cfg] DUT runs IP4 routing config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 66622541

7.2.7.22. 10ge2p1x710-ethip4-ip4base-eth-4vhostvr1024-2vm-mrr

Raw results IPv4 test cases with vhost

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4 for IPv4 routing.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with IPv4 routing and two static IPv4 /24 route entries. Qemu Guests are connected to VPP via vhost-user interfaces. Guests are running DPDK testpmd interconnectingvhost-user interfaces using 5 cores pinned to cpus 6-10 and 11-15 and 2048M memory. Testpmd is using socket-mem=1024M (512x2M hugepages), 5 cores (1 main core and 4 cores dedicated for io), forwarding mode is set to io, rxd/txd=1024, burst=64. DUT1, DUT2 are tested with 2p10GE NIC X710 by Intel.
  • [Ver] TG verification: In MaxReceivedRate test TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
Name Documentation Status
tc01-64b-1t1c-ethip4-ip4base-eth-4vhostvr1024-2vm-mrr [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618892, rx 22097576
tc02-1518b-1t1c-ethip4-ip4base-eth-4vhostvr1024-2vm-mrr [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 5645063
tc03-9000b-1t1c-ethip4-ip4base-eth-4vhostvr1024-2vm-mrr [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 1132179
tc04-imix-1t1c-ethip4-ip4base-eth-4vhostvr1024-2vm-mrr [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 14558451
tc05-64b-2t2c-ethip4-ip4base-eth-4vhostvr1024-2vm-mrr [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618911, rx 40325718
tc06-1518b-2t2c-ethip4-ip4base-eth-4vhostvr1024-2vm-mrr [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 10642538
tc07-9000b-2t2c-ethip4-ip4base-eth-4vhostvr1024-2vm-mrr [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771599, rx 2271165
tc08-imix-2t2c-ethip4-ip4base-eth-4vhostvr1024-2vm-mrr [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 27681271
tc09-64b-4t4c-ethip4-ip4base-eth-4vhostvr1024-2vm-mrr [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618910, rx 64147662
tc10-1518b-4t4c-ethip4-ip4base-eth-4vhostvr1024-2vm-mrr [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254852, rx 16254852
tc11-9000b-4t4c-ethip4-ip4base-eth-4vhostvr1024-2vm-mrr [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771599, rx 2771599
tc12-imix-4t4c-ethip4-ip4base-eth-4vhostvr1024-2vm-mrr [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 47512194

7.2.7.23. 10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr

Raw results L2BD test cases with VXLANoIPv4 and vhost

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4. Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUT1 and DUT2.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge- domain and MAC learning enabled. Qemu Guest is connected to VPP via vhost-user interfaces. Guest is running DPDK testpmd interconnecting vhost-user interfaces using 5 cores pinned to cpus 5-9 and 2048M memory. Testpmd is using socket-mem=1024M (512x2M hugepages), 5 cores (1 main core and 4 cores dedicated for io), forwarding mode is set to io, rxd/txd=1024, burst=64. DUT1, DUT2 are tested with 2p10GE NIC X710 by Intel.
  • [Ver] TG verification: In MaxReceivedRate test TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
  • [Ref] Applicable standard specifications: RFC7348.
Name Documentation Status
tc01-64b-1t1c-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 186567068, rx 29950498
tc02-1518b-1t1c-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 15743053, rx 9755456
tc03-9000b-1t1c-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2756320, rx 1982898
tc04-imix-1t1c-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 58985442, rx 22777738
tc05-64b-2t2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 186567076, rx 47832144
tc06-1518b-2t2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 15743055, rx 15743055
tc07-9000b-2t2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2756321, rx 2756321
tc08-imix-2t2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 58985442, rx 35083048
tc09-64b-4t4c-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 186567062, rx 65917471
tc10-1518b-4t4c-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 15743055, rx 15743055
tc11-9000b-4t4c-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2756321, rx 2756321
tc12-imix-4t4c-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 58985442, rx 54425255

7.2.7.24. 40ge2p1x710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr

Raw results L2BD test cases with vhost

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge- domain and MAC learning enabled. Qemu Guests are connected to VPP via vhost-user interfaces. Guests are running DPDK testpmd interconnecting vhost-user interfaces using 5 cores pinned to cpus on NUMA1 and 2048M memory. Testpmd is using socket-mem=1024M (512x2M hugepages), 5 cores (1 main core and 4 cores dedicated for io), forwarding mode is set to io, rxd/txd=1024, burst=64. DUT1, DUT2 are tested with 2p10GE NIC X710 by Intel.
  • [Ver] TG verification: In MaxReceivedRate test TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
Name Documentation Status
tc01-64b-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618893, rx 38458420
tc02-1518b-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254852, rx 11371283
tc03-9000b-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2322196
tc04-imix-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 26624543
tc05-64b-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618911, rx 69597228
tc06-1518b-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc07-9000b-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc08-imix-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 54264169
tc09-64b-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 297618911, rx 73620580
tc10-1518b-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 16254854, rx 16254854
tc11-9000b-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 2771600, rx 2771600
tc12-imix-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 66874722, rx 64908233

7.2.7.25. 40ge2p1xl710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr

Raw results L2BD test cases with vhost

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge- domain and MAC learning enabled. Qemu Guests are connected to VPP via vhost-user interfaces. Guests are running DPDK testpmd interconnecting vhost-user interfaces using 5 cores pinned to cpus on NUMA1 and 2048M memory. Testpmd is using socket-mem=1024M (512x2M hugepages), 5 cores (1 main core and 4 cores dedicated for io), forwarding mode is set to io, rxd/txd=1024, burst=64. DUT1, DUT2 are tested with 2p40GE NIC XL710 by Intel.
  • [Ver] TG verification: In MaxReceivedRate test TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
Name Documentation Status
tc01-64b-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 374999814, rx 41210048
tc02-1518b-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 39824422, rx 12111862
tc03-9000b-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 6790458, rx 2570542
tc04-imix-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 163843066, rx 33115871
tc05-64b-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 374999842, rx 70270075
tc06-1518b-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 39824421, rx 30196578
tc07-9000b-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 6790459, rx 4823123
tc08-imix-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 163843066, rx 58738111
tc09-64b-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 374999786, rx 70983592
tc10-1518b-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 39824421, rx 35410912
tc11-9000b-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 6790459, rx 4896779
tc12-imix-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 163843056, rx 71737449

7.2.7.26. 40ge2p1xl710-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr

Raw results L2BD test cases with vhost

  • [Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
  • [Enc] Packet Encapsulations: Eth-IPv4 for L2 switching of IPv4.
  • [Cfg] DUT configuration: DUT1 and DUT2 are configured with L2 bridge- domain and MAC learning enabled. Qemu Guests are connected to VPP via vhost-user interfaces. Guests are running DPDK testpmd interconnecting vhost-user interfaces using 5 cores pinned to cpus on NUMA1 and 2048M memory. Testpmd is using socket-mem=1024M (512x2M hugepages), 5 cores (1 main core and 4 cores dedicated for io), forwarding mode is set to io, rxd/txd=1024, burst=64. DUT1, DUT2 are tested with 2p40GE NIC XL710 by Intel.
  • [Ver] TG verification: In MaxReceivedRate test TG sends traffic at line rate and reports total received/sent packets over trial period. Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
Name Documentation Status
tc01-64b-1t1c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 374999813, rx 24748884
tc02-1518b-1t1c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 39824423, rx 6395369
tc03-9000b-1t1c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 6790458, rx 1254459
tc04-imix-1t1c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 163843066, rx 18610765
tc05-64b-2t2c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 374999786, rx 43228538
tc06-1518b-2t2c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 39824421, rx 12320955
tc07-9000b-2t2c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 6790458, rx 1231904
tc08-imix-2t2c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores, 1 receive queue per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 163843056, rx 33382701
tc09-64b-4t4c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 64B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 374999785, rx 62839302
tc10-1518b-4t4c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 1518B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 39824420, rx 18001597
tc11-9000b-4t4c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for 9000B frames using single trial throughput test.
MaxReceivedRate_Results [pkts/10sec]: tx 6790458, rx 3137329
tc12-imix-4t4c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores, 2 receive queues per NIC port.
[Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial throughput test. IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
MaxReceivedRate_Results [pkts/10sec]: tx 163843056, rx 57560449