9.7.1. ACL Security Groups¶
==============================================================================
ACL plugin Test Case
==============================================================================
ACL plugin version check; learn MACs OK
ACL create/delete test OK
permit ACL apply test OK
deny ACL apply test OK
VPP_624 permit ICMPv4 OK
VPP_624 permit ICMPv6 OK
VPP_624 deny ICMPv4 OK
VPP_624 deny ICMPv6 OK
permit TCPv4 OK
permit TCPv6 OK
permit UDPv4 OK
permit UDPv6 OK
deny TCPv4/v6 OK
deny UDPv4/v6 OK
verify add/dump acls OK
permit single TCPv4 OK
permit single UDPv4 OK
permit single TCPv6 OK
permit single UPPv6 OK
deny single TCPv4/v6 OK
deny single UDPv4/v6 OK
deny single UDPv4/v6, permit ip any, verify non-initial fragment blocked OK
VPP-687 zero length udp ipv4 packet OK
VPP-687 zero length udp ipv6 packet OK
permit TCPv4 + non-match range OK
permit TCPv6 + non-match range OK
permit UDPv4 + non-match range OK
permit UDPv6 + non-match range OK
deny TCPv4/v6 + non-match range OK
deny UDPv4/v6 + non-match range OK
==============================================================================
IRB Test Case
==============================================================================
ACL plugin prepare OK
ACL IPv6 routed -> bridged, L2 ACL deny OK
ACL IPv6 routed -> bridged, L3 ACL deny OK
ACL IPv4 routed -> bridged, L2 ACL deny OK
ACL IPv4 routed -> bridged, L3 ACL deny OK
ACL IPv6 bridged -> routed, L2 ACL deny OK
ACL IPv6 bridged -> routed, L3 ACL deny OK
ACL IPv4 bridged -> routed, L2 ACL deny OK
ACL IPv4 bridged -> routed, L3 ACL deny OK
ACL IPv6 routed -> bridged, L2 ACL permit+reflect OK
ACL IPv6 bridged -> routed, L2 ACL permit+reflect OK
ACL IPv4 routed -> bridged, L2 ACL permit+reflect OK
ACL IPv4 bridged -> routed, L2 ACL permit+reflect OK
ACL IPv6 routed -> bridged, L3 ACL permit+reflect OK
ACL IPv6 bridged -> routed, L3 ACL permit+reflect OK
ACL IPv4 routed -> bridged, L3 ACL permit+reflect OK
ACL IPv4 bridged -> routed, L3 ACL permit+reflect OK
ACL IPv6+EH routed -> bridged, L2 ACL deny OK
ACL IPv6+EH routed -> bridged, L3 ACL deny OK
ACL IPv6+EH bridged -> routed, L2 ACL deny OK
ACL IPv6+EH bridged -> routed, L3 ACL deny OK
ACL IPv6+EH routed -> bridged, L2 ACL permit+reflect OK
ACL IPv6+EH bridged -> routed, L2 ACL permit+reflect OK
ACL IPv6+EH routed -> bridged, L3 ACL permit+reflect OK
ACL IPv6+EH bridged -> routed, L3 ACL permit+reflect OK
ACL IPv4+MF routed -> bridged, L2 ACL deny OK
ACL IPv4+MF routed -> bridged, L3 ACL deny OK
ACL IPv4+MF bridged -> routed, L2 ACL deny OK
ACL IPv4+MF bridged -> routed, L3 ACL deny OK
ACL IPv4+MF routed -> bridged, L2 ACL permit+reflect OK
ACL IPv4+MF bridged -> routed, L2 ACL permit+reflect OK
ACL IPv4+MF routed -> bridged, L3 ACL permit+reflect OK
ACL IPv4+MF bridged -> routed, L3 ACL permit+reflect OK
==============================================================================
ACL plugin connection-oriented extended testcases
==============================================================================
Prepare the settings SKIP
IPv4: Basic conn timeout test reflect on ingress SKIP
IPv4: Basic conn timeout test reflect on egress SKIP
IPv4: reflect egress, clear conn SKIP
IPv4: reflect ingress, clear conn SKIP
IPv4: Idle conn behind active conn, reflect on ingress SKIP
IPv4: Idle conn behind active conn, reflect on egress SKIP
IPv6: Basic conn timeout test reflect on ingress SKIP
IPv6: Basic conn timeout test reflect on egress SKIP
IPv6: reflect egress, clear conn SKIP
IPv6: reflect ingress, clear conn SKIP
IPv6: Idle conn behind active conn, reflect on ingress SKIP
IPv6: Idle conn behind active conn, reflect on egress SKIP
Prepare for TCP session tests SKIP
IPv4: transient TCP session (incomplete 3WHS), ref. on ingress SKIP
IPv4: transient TCP session (incomplete 3WHS), ref. on egress SKIP
IPv4: established TCP session (complete 3WHS), ref. on ingress SKIP
IPv4: established TCP session (complete 3WHS), ref. on egress SKIP
IPv4: transient TCP session (3WHS,ACK,FINACK), ref. on ingress SKIP
IPv4: transient TCP session (3WHS,ACK,FINACK), ref. on egress SKIP
IPv6: transient TCP session (incomplete 3WHS), ref. on ingress SKIP
IPv6: transient TCP session (incomplete 3WHS), ref. on egress SKIP
IPv6: established TCP session (complete 3WHS), ref. on ingress SKIP
IPv6: established TCP session (complete 3WHS), ref. on egress SKIP
IPv6: transient TCP session (3WHS,ACK,FINACK), ref. on ingress SKIP
IPv6: transient TCP session (3WHS,ACK,FINACK), ref. on egress SKIP
==============================================================================
ACL on dot1q bridged subinterfaces Tests
==============================================================================
IP4 ACL SubIf Dot1Q bridged traffic OK
IP6 ACL SubIf Dot1Q bridged traffic OK
==============================================================================
ACL on dot1ad bridged subinterfaces Tests
==============================================================================
IP4 ACL SubIf Dot1AD bridged traffic OK
IP6 ACL SubIf Dot1AD bridged traffic OK
==============================================================================
ACL on dot1ad routed subinterfaces Tests
==============================================================================
IP4 ACL SubIf Dot1AD routed traffic OK
IP4 ACL SubIf wrong tags Dot1AD routed traffic OK
IP6 ACL SubIf Dot1AD routed traffic OK
IP6 ACL SubIf wrong tags Dot1AD routed traffic OK
==============================================================================
ACL on dot1q routed subinterfaces Tests
==============================================================================
IP4 ACL SubIf Dot1Q routed traffic OK
IP4 ACL SubIf wrong tags Dot1Q routed traffic OK
IP6 ACL SubIf Dot1Q routed traffic OK
IP6 ACL SubIf wrong tags Dot1Q routed traffic OK
9.7.2. APIs¶
==============================================================================
VAPI test
==============================================================================
run C VAPI tests SKIP
run C++ VAPI tests SKIP
==============================================================================
VPP Object Model Test
==============================================================================
run C++ VOM tests SKIP
==============================================================================
PAPI Test Case
==============================================================================
show version OK
show version - invalid parameters OK
u8 array OK
==============================================================================
PAPI Message parsing Test Case
==============================================================================
New compound type with array OK
Add new types OK
Add new types 2 OK
Add new message object OK
New message with array OK
Argument name OK
VLA with aribtrary length field placement OK
Message to byte encoding OK
Nested array type OK
Old style VLA array OK
Old VLA compound type OK
Old VLA array arbitrary placement OK
Old VLA u32 OK
Simple array OK
==============================================================================
JVPP Core Test Case
==============================================================================
JVPP Acl Callback Api Test Case OK
JVPP Acl Future Api Test Case OK
JVPP Core Callback Api Test Case OK
JVPP Core Future Api Test Case OK
JVPP Ioamexport Callback Api Test Case OK
JVPP Ioamexport Future Api Test Case OK
JVPP Ioampot Callback Api Test Case OK
JVPP Ioampot Future Api Test Case OK
JVPP Ioamtrace Callback Api Test Case OK
JVPP Ioamtrace Future Api Test Case OK
JVPP Snat Callback Api Test Case OK
JVPP Snat Future Api Test Case OK
9.7.3. ARP¶
==============================================================================
ARP Test Case
==============================================================================
ARP OK
ARP Duplicates OK
ARP Static OK
ARP reply with VRRP virtual src hw addr OK
MPLS OK
Proxy ARP OK
Interface Mirror Proxy ARP OK
==============================================================================
L2BD arp termination Test Case
==============================================================================
L2BD arp term - add 5 hosts, verify arp responses OK
L2BD arp term - delete 3 hosts, verify arp responses OK
L2BD arp term - recreate BD1, readd 3 hosts, verify arp responses OK
L2BD arp term - 2 IP4 addrs per host OK
L2BD arp term - create and update 10 IP4-mac pairs OK
L2BD arp/ND term - hosts with both ip4/ip6 OK
L2BD ND term - Add and Del hosts, verify ND replies OK
L2BD ND term - Add and update IP+mac, verify ND replies OK
L2BD arp term - send garps, verify arp event reports OK
L2BD arp term - send duplicate garps, verify suppression OK
L2BD arp term - disable ip4 arp events,send garps, verify no events OK
L2BD ND term - send NS packets verify reports OK
L2BD ND term - send duplicate ns, verify suppression OK
L2BD ND term - disable ip4 arp events,send ns, verify no events OK
9.7.4. BFD API¶
==============================================================================
Bidirectional Forwarding Detection (BFD) - API
==============================================================================
activate SHA1 authentication SKIP
create BFD session using non-existent SHA1 (negative case) SKIP
create a BFD session SKIP
create IPv6 BFD session SKIP
create a BFD session (SHA1) SKIP
add SHA1 keys SKIP
change SHA1 key SKIP
deactivate SHA1 authentication SKIP
create the same BFD session twice (negative case) SKIP
create the same BFD session twice (negative case) (SHA1) SKIP
modify BFD session parameters SKIP
share single SHA1 key between multiple BFD sessions SKIP
9.7.5. BFD Authentication¶
==============================================================================
Bidirectional Forwarding Detection (BFD) (SHA1 auth)
==============================================================================
hold BFD session up SKIP
hold BFD session up - meticulous auth SKIP
session is not brought down by unauthenticated msg SKIP
session is not brought down by msg with non-existent key-id SKIP
session is not brought down by msg with wrong auth type SKIP
simulate remote peer restart and resynchronization SKIP
session is not kept alive by msgs with bad sequence numbers SKIP
bring BFD session up SKIP
9.7.6. BFD Authentication Change¶
==============================================================================
Bidirectional Forwarding Detection (BFD) (changing auth)
==============================================================================
change auth key without disturbing session state (delayed) SKIP
change auth key without disturbing session state (immediate) SKIP
turn auth off without disturbing session state (delayed) SKIP
turn auth off without disturbing session state (immediate) SKIP
turn auth on without disturbing session state (delayed) SKIP
turn auth on without disturbing session state (immediate) SKIP
9.7.7. BFD CLI¶
==============================================================================
Bidirectional Forwarding Detection (BFD) (CLI)
==============================================================================
create/modify/delete IPv4 BFD UDP session SKIP
create/modify/delete IPv6 BFD UDP session SKIP
create/modify/delete IPv6 BFD UDP session (authenticated) SKIP
create/modify/delete IPv4 BFD UDP session (authenticated) SKIP
put session admin-up and admin-down SKIP
turn authentication on and off SKIP
turn authentication on and off (delayed) SKIP
set/delete meticulous SHA1 auth key SKIP
set/delete SHA1 auth key SKIP
set/del udp echo source SKIP
show commands SKIP
9.7.8. BFD IPv4¶
==============================================================================
Bidirectional Forwarding Detection (BFD)
==============================================================================
put session admin-up and admin-down SKIP
configuration change while peer in demand mode SKIP
verify session goes down after inactivity SKIP
echo function SKIP
session goes down if echo function fails SKIP
echo packets looped back SKIP
echo function stops if echo source is removed SKIP
echo function stops if peer sets required min echo rx zero SKIP
hold BFD session up SKIP
immediately honor remote required min rx reduction SKIP
interface with bfd session deleted SKIP
echo packets with invalid checksum don't keep a session up SKIP
large remote required min rx interval SKIP
modify detect multiplier SKIP
modify session - double required min rx SKIP
modify session - halve required min rx SKIP
no periodic frames outside poll sequence if remote demand set SKIP
test correct response to control frame with poll bit set SKIP
test poll sequence queueing SKIP
bring BFD session down SKIP
bring BFD session up SKIP
bring BFD session up - first frame looked up by address pair SKIP
verify slow periodic control frames while session down SKIP
stale echo packets don't keep a session up SKIP
no packets when zero remote required min rx interval SKIP
9.7.9. BFD IPv6¶
==============================================================================
Bidirectional Forwarding Detection (BFD) (IPv6)
==============================================================================
echo function used SKIP
echo packets looped back SKIP
hold BFD session up SKIP
interface with bfd session deleted SKIP
bring BFD session up SKIP
bring BFD session up - first frame looked up by address pair SKIP
==============================================================================
BFD-FIB interactions (IPv6)
==============================================================================
BFD-FIB interactions SKIP
9.7.10. BIER - Bit Indexed Explicit Replication¶
==============================================================================
BIER Test Case
==============================================================================
BIER end-to-end OK
BIER head OK
BIER head over UDP OK
BIER midpoint OK
BIER Tail OK
BIER Tail over UDP OK
==============================================================================
BIER FIB Test Case
==============================================================================
BFIB Unit Tests OK
9.7.11. Classifier¶
==============================================================================
Classifier Test Case
==============================================================================
IP ACL test OK
MAC ACL test OK
IP PBR test OK
9.7.12. Container Integration¶
==============================================================================
Container integration extended testcases
==============================================================================
IPv4 basic connectivity test SKIP
IPv6 basic connectivity test SKIP
Create loopbacks overlapping with remote addresses SKIP
IPv4 local-spoof connectivity test SKIP
IPv6 local-spoof connectivity test SKIP
Configure container commands SKIP
IPv4 test after configuring container SKIP
IPv6 test after configuring container SKIP
Unconfigure container commands SKIP
IPv4 local-spoof after unconfig test SKIP
IPv6 local-spoof after unconfig test SKIP
9.7.13. CRUD Loopback¶
==============================================================================
CRUD Loopback
==============================================================================
test_crud (test_interface_crud.TestLoopbackInterfaceCRUD) OK
test_down (test_interface_crud.TestLoopbackInterfaceCRUD) OK
9.7.14. DHCP¶
==============================================================================
DHCP Test Case
==============================================================================
DHCPv6 Proxy OK
DHCP Client OK
DHCPv4 Proxy OK
9.7.15. Distributed Virtual Router¶
==============================================================================
Distributed Virtual Router
==============================================================================
Distributed Virtual Router OK
L2 Emulation OK
9.7.16. DS-Lite Softwire¶
==============================================================================
DS-Lite Test Cases
==============================================================================
Test DS-Lite OK
9.7.17. FIB¶
==============================================================================
FIB Test Case
==============================================================================
FIB Unit Tests OK
9.7.18. Flowprobe¶
==============================================================================
Re-enable Flowprobe feature
==============================================================================
disable flowprobe feature after first packets and re-enable SKIP
==============================================================================
collect information on Ethernet, IP4 and IP6 datapath (no timers)
==============================================================================
no timers, one CFLOW packet, 9 Flows inside OK
no timers, two CFLOW packets (mtu=256), 3 Flows in each OK
L2 data on IP4 datapath OK
L2 data on IP6 datapath OK
L2 data on L2 datapath OK
L3 data on IP4 datapath OK
L3 data on IP6 datapath OK
L3 data on L2 datapath OK
L4 data on IP4 datapath OK
L4 data on IP6 datapath OK
L4 data on L2 datapath OK
verify templates on IP6 datapath OK
verify templates on IP4 datapath OK
verify template on L2 datapath OK
==============================================================================
Disable Flowprobe feature
==============================================================================
disable flowprobe feature after first packets SKIP
==============================================================================
Re-enable IPFIX
==============================================================================
disable IPFIX after first packets and re-enable after few packets SKIP
==============================================================================
Disable IPFIX
==============================================================================
disable IPFIX after first packets SKIP
9.7.19. Geneve Tunnels¶
==============================================================================
GENEVE Test Case
==============================================================================
Decapsulation test OK
Encapsulation test OK
Multicast flood test OK
Multicast receive test OK
Unicast flood test OK
9.7.20. GRE Tunnels¶
==============================================================================
GRE Test Case
==============================================================================
GRE IPv4 tunnel Tests OK
GRE IPv6 tunnel Tests OK
GRE tunnel L2 Tests OK
GRE tunnel VRF Tests OK
9.7.21. GTPU Tunnels¶
==============================================================================
GTPU Test Case
==============================================================================
Decapsulation test OK
Encapsulation test OK
Multicast flood test OK
Multicast receive test OK
Unicast flood test OK
9.7.22. IP Multicast Routing¶
==============================================================================
IP Multicast Test Case
==============================================================================
IP Multicast Bi-directional OK
IPv6 Multicast Replication OK
IPv6 Multicast Replication in non-default table OK
IP Multicast Replication OK
IP Multicast Connected Source check OK
IP Multicast Signal OK
IP Multicast Replication in non-default table OK
9.7.23. IPSec¶
==============================================================================
Basic test for IPSEC using AH transport and Tunnel mode
==============================================================================
ipsec ah v4 transport basic test OK
ipsec ah v4 transport burst test OK
ipsec ah 4o4 tunnel basic test OK
ipsec ah 4o4 tunnel burst test OK
==============================================================================
Basic test for ipsec esp sanity - tunnel and transport modes.
==============================================================================
ipsec esp v4 transport basic test OK
ipsec esp v4 transport burst test OK
ipsec esp 4o4 tunnel basic test OK
ipsec esp 4o4 tunnel burst test OK
9.7.24. IPv4 FIB CRUD¶
==============================================================================
FIB - add/update/delete - ip4 routes
==============================================================================
Add 1k routes OK
Delete 100 routes OK
Add 1k routes OK
Delete 1.5k routes OK
9.7.25. IPv4 Routing¶
==============================================================================
IPv4 Test Case
==============================================================================
IPv4 FIB test OK
==============================================================================
IPv4 routes via NULL
==============================================================================
IP NULL route OK
==============================================================================
IPv4 disabled
==============================================================================
IP Disabled OK
==============================================================================
IPv4 Subnets
==============================================================================
IP Sub Nets OK
==============================================================================
IPv4 VLAN-0
==============================================================================
IP VLAN-0 OK
==============================================================================
IPv4 Load-Balancing
==============================================================================
IP Load-Balancing OK
==============================================================================
IPv4 Deaggregate Routes
==============================================================================
IP Deag Routes OK
==============================================================================
IPv4 Input Exceptions
==============================================================================
IP Input Exceptions OK
==============================================================================
IPv4 Punt Police/Redirect
==============================================================================
IP punt police and redirect OK
9.7.26. IPv4 VRF Multi-instance¶
==============================================================================
IP4 VRF Multi-instance Test Case
==============================================================================
IP4 VRF Multi-instance test 1 - create 5 BDs OK
IP4 VRF Multi-instance test 2 - delete 2 VRFs OK
IP4 VRF Multi-instance 3 - add 2 VRFs OK
IP4 VRF Multi-instance test 4 - delete 4 VRFs OK
9.7.27. IPv6 Routing¶
==============================================================================
IPv6 Test Case
==============================================================================
IPv6 FIB test OK
IPv6 Neighbour Solicitation Exceptions OK
ND Duplicates OK
IPv6 Router Solicitation Exceptions OK
==============================================================================
IPv6 Punt Police/Redirect
==============================================================================
IP6 punt police and redirect OK
==============================================================================
IPv6 disabled
==============================================================================
IP Disabled OK
==============================================================================
IPv6 ND ProxyTest Case
==============================================================================
IPv6 Proxy ND OK
==============================================================================
IPv6 Load-Balancing
==============================================================================
IPv6 Load-Balancing OK
==============================================================================
IPv6 routes via NULL
==============================================================================
IP NULL route OK
==============================================================================
IPv6 Input Exceptions
==============================================================================
IP6 Input Exceptions OK
9.7.28. IPv6 VRF Multi-instance¶
==============================================================================
IP6 VRF Multi-instance Test Case
==============================================================================
IP6 VRF Multi-instance test 1 - create 4 VRFs OK
IP6 VRF Multi-instance test 2 - reset 2 VRFs OK
IP6 VRF Multi-instance 3 - add 2 VRFs OK
IP6 VRF Multi-instance test 4 - reset 4 VRFs OK
9.7.29. IRB Integrated Routing-Bridging¶
==============================================================================
IRB Test Case
==============================================================================
IPv4 IRB test 1 OK
IPv4 IRB test 2 OK
9.7.30. Kube-proxy¶
==============================================================================
Kube-proxy Test Case
==============================================================================
Kube-proxy NAT44 OK
Kube-proxy NAT46 SKIP
Kube-proxy NAT64 SKIP
Kube-proxy NAT66 SKIP
9.7.31. L2 FIB CRUD¶
==============================================================================
L2 FIB Test Case
==============================================================================
L2 FIB - program 100 + 100 MACs OK
L2 FIB - program 100 + delete 12 MACs OK
L2 FIB - flush all OK
L2 FIB - flush BD OK
L2 FIB - flush interface OK
L2 FIB - mac learning events OK
L2 FIB - mac learning max macs in event OK
L2 FIB - program 100 MACs OK
L2 FIB - Program 10 MACs, learn 10 OK
9.7.32. L2BD Multi-instance¶
==============================================================================
L2BD Multi-instance Test Case
==============================================================================
L2BD Multi-instance test 1 - create 5 BDs OK
L2BD Multi-instance test 2 - update data of 5 BDs OK
L2BD Multi-instance test 3 - delete 2 BDs OK
L2BD Multi-instance test 4 - add 2 BDs OK
L2BD Multi-instance test 5 - delete 5 BDs SKIP
9.7.33. L2BD Switching¶
==============================================================================
L2BD Test Case
==============================================================================
L2BD MAC learning dual-loop test OK
L2BD MAC learning single-loop test OK
9.7.34. L2XC Multi-instance¶
==============================================================================
L2XC Multi-instance Test Case
==============================================================================
L2XC Multi-instance test 1 - create 10 cross-connects OK
L2XC Multi-instance test 2 - delete 4 cross-connects OK
L2BD Multi-instance 3 - add new 4 cross-connects OK
L2XC Multi-instance test 4 - delete 10 cross-connects OK
9.7.35. L2XC Switching¶
==============================================================================
L2XC Test Case
==============================================================================
L2XC dual-loop test OK
L2XC single-loop test OK
9.7.36. LISP Tunnels¶
==============================================================================
Basic LISP test
==============================================================================
Test case for basic encapsulation OK
9.7.37. Load Balancer¶
==============================================================================
Load Balancer Test Case
==============================================================================
Load Balancer IP4 GRE4 OK
Load Balancer IP4 GRE6 OK
Load Balancer IP6 GRE4 OK
Load Balancer IP6 GRE6 OK
9.7.38. MACIP Access Control¶
==============================================================================
MACIP Tests
==============================================================================
MACIP 10 ACLs each with 100+ entries OK
MACIP 10 ACLs each with 100+ entries with IP4 traffic OK
MACIP 10 ACLs each with 100+ entries with IP6 traffic OK
MACIP ACL with 10 entries OK
MACIP ACL with 100 entries OK
MACIP ACL with 2 entries OK
MACIP ACL with 20 entries OK
MACIP ACL with 5 entries OK
MACIP ACL with 50 entries OK
MACIP 2 ACLs each with 100+ entries OK
MACIP replace ACL OK
MACIP ACL delete intf with acl OK
==============================================================================
MACIP with IP6 traffic
==============================================================================
IP6 MACIP exactMAC|exactIP ACL bridged traffic OK
IP6 MACIP exactMAC|subnetIP ACL bridged traffic OK
IP6 MACIP exactMAC|wildIP ACL bridged traffic OK
IP6 MACIP oui_MAC|exactIP ACL bridged traffic OK
IP6 MACIP ouiMAC|subnetIP ACL bridged traffic OK
IP6 MACIP ouiMAC|wildIP ACL bridged traffic OK
IP6 MACIP wildcardMAC|exactIP ACL bridged traffic OK
IP6 MACIP wildcardMAC|subnetIP ACL bridged traffic OK
IP6 MACIP wildcardMAC|wildIP ACL bridged traffic OK
MACIP replace ACL with IP6 traffic OK
IP6 MACIP exactMAC|exactIP ACL routed traffic OK
IP6 MACIP exactMAC|subnetIP ACL routed traffic OK
IP6 MACIP exactMAC|wildIP ACL routed traffic OK
IP6 MACIP ouiMAC|exactIP ACL routed traffic OK
IP6 MACIP ouiMAC|subnetIP ACL routed traffic OK
IP6 MACIP ouiMAC|wildIP ACL routed traffic OK
IP6 MACIP wildcardMAC|exactIP ACL routed traffic OK
IP6 MACIP wildcardMAC|subnetIP ACL routed traffic OK
IP6 MACIP wildcardMAC|wildIP ACL OK
==============================================================================
MACIP with IP4 traffic
==============================================================================
IP4 MACIP wildcardMAC|exactIP ACL bridged traffic OK
IP4 MACIP exactMAC|exactIP ACL bridged traffic OK
IP4 MACIP exactMAC|subnetIP ACL bridged traffic OK
IP4 MACIP exactMAC|wildIP ACL bridged traffic OK
IP4 MACIP ouiMAC|exactIP ACL bridged traffic OK
IP4 MACIP ouiMAC|subnetIP ACL bridged traffic OK
IP4 MACIP ouiMAC|wildIP ACL bridged traffic OK
IP4 MACIP wildcardMAC|subnetIP ACL bridged traffic OK
IP4 MACIP wildcardMAC|wildIP ACL bridged traffic OK
MACIP replace ACL with IP4 traffic OK
IP4 MACIP exactMAC|exactIP ACL routed traffic OK
IP4 MACIP exactMAC|subnetIP ACL routed traffic OK
IP4 MACIP exactMAC|wildIP ACL routed traffic OK
IP4 MACIP ouiMAC|exactIP ACL routed traffic OK
IP4 MACIP ouiMAC|subnetIP ACL routed traffic OK
IP4 MACIP ouiMAC|wildIP ACL routed traffic OK
IP4 MACIP wildcardMAC|exactIP ACL routed traffic OK
IP4 MACIP wildcardMAC|subnetIP ACL routed traffic OK
IP4 MACIP wildcardMAC|wildIP ACL OK
9.7.39. MAP Softwires¶
==============================================================================
MAP Test Case
==============================================================================
MAP-E OK
9.7.40. MFIB Multicast FIB¶
==============================================================================
MFIB Test Case
==============================================================================
MFIB Unit Tests OK
9.7.41. MPLS Switching¶
==============================================================================
MPLS-L2
==============================================================================
Virtual Private LAN Service OK
Virtual Private Wire Service OK
==============================================================================
MPLS Test Case
==============================================================================
MPLS Local Label Binding test OK
MPLS Deagg OK
MPLS label imposition test OK
MPLS Interface Receive OK
MPLS Multicast Head-end OK
MPLS IPv4 Multicast Tail OK
MPLS IPv6 Multicast Tail OK
MPLS Multicast Mid Point OK
MPLS label swap tests OK
MPLS Tunnel Tests OK
MPLS V4 Explicit NULL test OK
MPLS V6 Explicit NULL test OK
==============================================================================
MPLS PIC edge convergence
==============================================================================
MPLS eBGP PIC edge convergence OK
MPLS iBGP PIC edge convergence OK
MPLSv6 eBGP PIC edge convergence OK
==============================================================================
MPLS disabled
==============================================================================
MPLS Disabled OK
9.7.42. NAT44¶
==============================================================================
NAT44 Test Cases
==============================================================================
Delete NAT44 session OK
NAT44 dynamic translation test OK
NAT44 handling of client packets with TTL=1 OK
NAT44 handling of error responses to client packets with TTL=2 OK
NAT44 handling of server packets with TTL=1 OK
NAT44 handling of error responses to server packets with TTL=2 OK
NAT44 interfaces without configured IP address OK
NAT44 forwarding test OK
NAT44 translate fragments arriving in order OK
NAT44 translate fragments arriving out of order OK
NAT44 hairpinning - 1:1 NAPT OK
NAT44 hairpinning - 1:1 NAT OK
1:1 NAT translate packet with unknown protocol - hairpinning OK
NAT44 translate packet with unknown protocol - hairpinning OK
Identity NAT OK
NAT44 multiple inside interfaces with overlapping address space OK
Acquire NAT44 addresses from interface OK
Identity NAT with addresses from interface OK
Static mapping with addresses from interface OK
IPFIX logging NAT addresses exhausted OK
IPFIX logging NAT44 session created/delted OK
MAX translations per user - recycle the least recently used OK
NAT44 multiple non-overlapping address space inside interfaces OK
One armed NAT44 OK
NAT44 interface output feature (in2out postrouting) OK
NAT44 interface output feature hairpinning (in2out postrouting) OK
NAT44 interface output feature VRF aware (in2out postrouting) OK
Ping internal host from outside network OK
Ping NAT44 out interface from outside network OK
NAT44 add pool addresses to FIB OK
Port restricted NAT44 (MAP-E CE) OK
NAT44 fragments hairpinning OK
NAT44 set/get virtual fragmentation reassembly OK
1:1 NAT initialized from inside network OK
NAT44 interfaces without configured IP address - 1:1 NAT OK
NAT44 local service load balancing OK
1:1 NAT initialized from outside network OK
1:1 NAT translate packet with unknown protocol OK
1:1 NAT VRF awareness OK
1:1 NAPT initialized from inside network OK
NAT44 interfaces without configured IP address - 1:1 NAPT OK
1:1 NAPT initialized from outside network OK
Twice NAT44 OK
Acquire twice NAT44 addresses from interface OK
Twice NAT44 local service load balancing OK
NAT44 translate packet with unknown protocol OK
NAT44 tenant VRF independent address pool mode OK
NAT44 tenant VRF aware address pool mode OK
==============================================================================
Deterministic NAT Test Cases
==============================================================================
Deterministic NAT translation test (TCP, UDP, ICMP) OK
NAT plugin run deterministic mode OK
Deterministic NAT multiple users OK
Deterministic NAT maximum sessions per user limit SKIP
Deterministic NAT session timeouts SKIP
Set deterministic NAT timeouts OK
Deterministic NAT TCP session close from inside network OK
Deterministic NAT TCP session close from outside network OK
9.7.43. NAT64¶
==============================================================================
NAT64 Test Cases
==============================================================================
NAT64 dynamic translation test OK
NAT64 translate fragments arriving in order OK
NAT64 translate fragments arriving out of order OK
NAT64 hairpinning OK
NAT64 translate packet with unknown protocol - hairpinning OK
NAT64 ICMP Error message translation OK
Enable/disable NAT64 feature on the interface OK
Acquire NAT64 pool addresses from interface OK
One armed NAT64 OK
Add/delete address to NAT64 pool OK
NAT64 Network-Specific Prefix OK
NAT64 fragments hairpinning OK
NAT64 session timeout SKIP
Set NAT64 timeouts OK
NAT64 static translation test OK
Add/delete static BIB entry OK
NAT64 translate packet with unknown protocol OK
9.7.44. P2P Ethernet Subinterface¶
==============================================================================
P2P Ethernet tests
==============================================================================
delete/create p2p subif OK
create 1k of p2p subifs OK
==============================================================================
P2P Ethernet IPv4 tests
==============================================================================
receive ipv4 packet via p2p subinterface OK
route rx packet not matching p2p subinterface OK
send ip4 packet via p2p subinterface OK
drop tx ip4 packet not matching p2p subinterface OK
==============================================================================
P2P Ethernet IPv6 tests
==============================================================================
receive ipv6 packet via p2p subinterface OK
drop rx packet not matching p2p subinterface OK
route rx ip6 packet not matching p2p subinterface OK
send packet via p2p subinterface OK
drop tx ip6 packet not matching p2p subinterface OK
standard routing without p2p subinterfaces OK
9.7.45. PPPoE Encapsulation¶
==============================================================================
PPPoE Test Case
==============================================================================
PPPoE Add Same Session Twice Test OK
PPPoE Decap Test OK
PPPoE Decap Multiple Sessions Test OK
PPPoE Delete Same Session Twice Test OK
PPPoE Encap Test OK
PPPoE Encap Multiple Sessions Test OK
9.7.46. SPAN Switch Port Analyzer¶
==============================================================================
SPAN Test Case
==============================================================================
SPAN device rx mirror OK
SPAN l2 broadcast mirror OK
SPAN l2 rx tx mirror OK
SPAN l2 tx mirror OK
SPAN l2 rx mirror OK
SPAN l2 rx mirror into 1ad subif+vtr OK
SPAN l2 rx mirror into 1q subif+vtr OK
SPAN l2 rx mirror into gre-subif+vtr OK
SPAN l2 rx mirror into vxlan OK
9.7.47. SRv6 Routing¶
==============================================================================
SRv6 Test Case
==============================================================================
Test SRv6 End (without PSP) behavior. OK
Test SRv6 End.DT4 behavior. OK
Test SRv6 End.DT6 behavior. OK
Test SRv6 End.DX2 behavior. OK
Test SRv6 End.DX4 behavior. OK
Test SRv6 End.DX6 behavior. OK
Test SRv6 End.X (without PSP) behavior. OK
Test SRv6 End.X with PSP behavior. OK
Test SRv6 End with PSP behavior. OK
Test SRv6 Transit.Encaps behavior for IPv6. OK
Test SRv6 Transit.Encaps behavior for IPv4. OK
Test SRv6 Transit.Encaps behavior for L2. SKIP
Test SRv6 Transit.Insert behavior (IPv6 only). OK
Test SRv6 Transit.Insert behavior (IPv6 only). OK
9.7.48. TCP/IP Stack¶
==============================================================================
TCP Test Case
==============================================================================
TCP builtin client/server transfer OK
TCP Unit Tests OK
9.7.49. UDP Stack¶
==============================================================================
UDP Encap Test Case
==============================================================================
UDP Encap test OK
9.7.50. VTR VLAN Tag Rewrites¶
==============================================================================
VTR Test Case
==============================================================================
1AD VTR pop 1 test OK
1AD VTR pop 2 test OK
1AD VTR push 1 1AD test OK
1AD VTR push 1 1Q test OK
1AD VTR push 2 1AD test OK
1AD VTR push 2 1Q test OK
1AD VTR translate 1 -> 1 1AD test OK
1AD VTR translate 1 -> 1 1Q test OK
1AD VTR translate 1 -> 2 1AD test OK
1AD VTR translate 1 -> 2 1Q test OK
1AD VTR translate 2 -> 1 1AD test OK
1AD VTR translate 2 -> 1 1Q test OK
1AD VTR translate 2 -> 2 1AD test OK
1AD VTR translate 2 -> 2 1Q test OK
1Q VTR pop 1 test OK
1Q VTR push 1 test OK
1Q VTR push 2 test OK
1Q VTR translate 1 -> 1 test OK
1Q VTR translate 1 -> 2 test OK
9.7.51. VXLAN Tunnels¶
==============================================================================
VXLAN Test Case
==============================================================================
Decapsulation test OK
Encapsulation test OK
Multicast flood test OK
Multicast receive test OK
Unicast flood test OK
9.7.52. VXLAN-GPE Tunnels¶
==============================================================================
VXLAN-GPE Test Case
==============================================================================
Decapsulation test SKIP
Encapsulation test SKIP
Multicast flood test SKIP
Multicast receive test SKIP
Unicast flood test SKIP
9.7.53. Other Tests¶
==============================================================================
Ping Test Case
==============================================================================
basic ping test OK
burst ping test OK
==============================================================================
Session Test Case
==============================================================================
Session Unit Tests OK
==============================================================================
Template verification, timer tests
==============================================================================
timer less than template timeout OK
timer greater than template timeout OK
verify cflow packet fields OK